Problem with Leap if I use Aegis Client on winCE4.2

Hello
With Cisco PC-Card is no problem to authenticate with leap. But I am struggeling with the meetinghouse aegis client installed on Symbol MC3000 with windwos CE 4.2.
I tried with dyn. wep and ktip, but both failed with the aegis client. There is absolutely no entry in the cisco ACS.
Any input is very welcome
Oliver

Yes, you are right. I found it out too.
TKIP with LEAP on windows CE 4.20 is working proper only with aegis client 2.1.4 from meetinghouse.
best regards
Oliver

Similar Messages

Problems with 'COMMIT MISSING' - when using ABAP client proxies

Hi
We have a requirement - wherein while SAP std inbound IDOCs are being processed in the R/3 system- we need to monitor the processing of idocs - by sending relevant information out of the R3 system to a monitoring dashboard - outside of the R/3 environment.
Inorder to accomplish the above, we generated a async. client proxy class in the R3 system by pointing to a XI o/b message interface and that interface mapped on to DB calls - from which the dashboard was bringing up status of idocs being processed in R3
We made a call to the async class method from within the idoc user exit that lies within IDOC_INPUT_ORDERS FM . The user exit chosen to make the call was - after the salesorder processing for the inbound idoc was done in the above FM. We have not given any COMMIT WORK statement after the async client proxy method call within the user exit - since the call was being made from within user exit and we did not want to upset SAP std processing flow.
Now, when the inbound idoc processing is being done by using SAP std program rbdapp01 using parallel processing option of packets, the outbound message generated is in 'COMMIT MISSING' status - whereas - when rbdapp01 is executed in normal mode - the proxy message is sent out ok out of the R3 integration engine.
The program rbdapp01 has a COMMIT WORK statement after each IDOC packet is processed - but still with the parallel processing option - the proxy message stays in th R3 box - with the status 'COMMIT MISSING'
Any thoughts/ pointers on this is appreciated....

Hi Karthik,
I don't think you can get this to work using an asynchronous proxy - except perhaps by spawning an update task to send the data.
Perhaps you can re-cast this as a synchronous interface?
Regards,
Thorsten

Problems with a shared calendar using Outlook 2007 and Exchange 2010

Hello all,
We are having a problem with sharing a calendar using Outlook 2007 and Exchange 2010.
I will start with some background. I have just started my position with this company. I have been working with networks for awhile at the small business level. I have not had much production experience with exchange. There is only myself and my supervisor
who has inherited a midsized network which was built by five previous techs that are no longer with the company. Of course, the previous techs did not leave much documentation, so the original hows and whys for our system setup has been lost.
One of the managers has a calendar she shares with some of our users. I believe this calendar has been in use since sometime in 2006. A mailbox was created to hold this calendar to keep it separate from the managers calendar. I am not sure what version
of exchange they were using at that time, but I assume there was one or two migrations of it getting to its current state on our exchange 2010 server. At some point it was observed that the other workers she was sharing with were not able to access it correctly.
I am not fully sure what the original problem was (possibly some people not being able to see or connect to the calendar), but it was decided to give everyone who needed access to this calendar full access permissions through exchange. Correct me if I
am wrong, but I believe that gave everyone connected the ability to do anything with the calendar. Of course the manager was not happy about that. This is where I started working on the problem.
I removed everyone, except the manager who wants to control the calendar, from having "Full Access Permissions". This did have the effect of making some people just able to see the calendar and not make changes. Though there were others that were
able to connect to the calendar who I thought would not be able to. The manager that originally created the calendar did try to manage access to it through the Outlook interface, though it currently does not seem to be fully in effect.
So, to get to the point of what we are trying to do, is there a way to get the original manager back into control of the calendar though Outlook? It would be preferred to be able to keep the history of what they tracked of this calendar, so starting a new
one would be something we would rather avoid. After that, getting all of the users that need to connect to the calendar reconnected with the correct access permissions and making sure they are all synchronized.
I realize this is a big mess, and your help would be greatly appreciated.

Hi Nigel,
How is the impact, just one user or all users, Outlook or OWA?
If just one user, it seems like an issue on the Outlook Client side.
Please trying to re-create new profile to fresh the caches.
Please runing Outlook under safe mode to avoid some AVs, add-ins and firewall.
Found a similar thread for your reference:
Calendar Sharing not available error message
http://social.technet.microsoft.com/Forums/exchange/en-US/d9b33281-d7bb-4608-8025-16fb26643d0d/calendar-sharing-not-available-error-message?forum=exchangesvrclientslegacy
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Problems with a VBA Userform using Multipage (2) and DTPicker.

Hi
Problems with a VBA Userform using Multipage (2) and DTPicker (4)
On Page1 I've got 2 DTPicker, one for the date and the second for the time.
Same thing on Page 2.
Problem:
Only one set will work, if I close the Userform with" MultiPage"on page2, only that set will work.
Same thing if I close on Page 1 then just the set on Page 1 will work.
As anyone seen this problem and any work around you may think would help.
I'm using Windows 7 , Ms Office Pro. 2003
same problem on Windows Vista , XL2003
Cimjet

There are a number of issues relating to the way that date pickers are handled, but the most important is that their output is text. In order to get the values into Excel, you need to format the Excel columns as Date and Custom (time format) and convert
the output to the worksheet from text to date values.
Date pickers also display a few anomalies on multi-page forms, so you need a belt and braces approach. Personally I would put the code to call the form and enter the values in a standard module (as now in the example) and use a belt and braces approach to
maintaining the format.
I think you will find the example now works.
Revised Example
Graham Mayor - Word MVP
www.gmayor.com

Problem with Progress DB while using to connect using JDBC Adapter

Hi,
I am facing Problem with Progress DB while using to connect using JDBC Adapter. I am getting the following error in auditlog file like,
Error during database connection to the database URL jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db using the JDBC driver "com.progress.sql.jdbc.JdbcProgressDriver" : com.sap.aii.adapter.jdbc.sql.DriverManagerException: Unable to locate a suitable JDBC driver to establish a connection to URL " jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db "
I tried using the following all URLs,
1. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.
2. jdbc:JdbcProgress:T:156.5.31.65:2545:i_apoext.db
3.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.
4.
jdbc:JdbcProgress:T:156.5.31.65:2545:/mfgprodev/devbadb
/devsche/i_apoext.db.
Can anyone please help me out in solving this issue.
May be the cause for this is :
1) The Wrong URL format
2) CLASSPATH is not setted properly..
Can you look more into this stuff.
Thanks,
Soorya.

Hi,
To access any database fromm XI, using the JDBC adapter, the corresponding drivers have to be installed on the XI server.
Just check this note 831162.
Also, check this PDF to install Drivers in XI,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10

Problem with Pole zero analysis using multisim

Problem with Pole zero analysis using multisim
When I tried to find input impedance function's pole zero of a parallel LC network using Multisim
pole zero analysis, I get following message
| | doAnalyses: matrix is singular
| |
| |
| | pz simulation(s) aborted "
The circuit as well as log file attached.
How to correctly perform pole zero analysis?
Solved!
Go to Solution.
Attachments:
Parallel LC.JPG ‏8 KB
parallel LC.txt ‏7 KB

dear sir,
thanks for your earlier reply to my question on pole zero analysis
one more problem on pole zero analysis ;
i tried to do pole zero analysis for circuit(shown in attached file where C1=1/6F(167mF) C2=5/18F(278mF) for which
z(s)= (s^2+9)(s^2+1)
s(s^2+4)
for which zeros are at +/-3j ,+/-1j
poles at 0 ,+/-2j as per theory:
But multisim gives different values (shown in attached file)
what is the problem?
please clarify.
thanks & regards
sagar vanarase
Attachments:
1portLC.JPG ‏219 KB

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo?

Is anyone using iPhoto having a problem with the slide show using shatter where it does not let you put a title over photo? It use to work but it no longer lets you place a title over the opening photo.

Is your signature still current?(iPhoto '08, OS X Mountain Lion (10.8.4)) I can confirm this for iPhoto '11; Shatter will only show the text slide title between the slides. Ken Burns and Classic theme can still be set to overlay the caption and title directly over the slides.

I had a problem with slowness so I used "reset". The popup ran forever so I stopped it. Now I can't remove or add the program.

I had a problem with slowness so I used "reset". The popup ran forever so I stopped it. Now I can't use, remove, or add the program. How do I proceed?
TIA,
BWSwede

You can paste that path in the command line in the Windows Explorer file manager.

Problem with CORBA application deployed using Java Web Start 1_6_0.

Java Web Start fans and experts:
We have been using Java Web Start to deploy the client side of a CORBA-based application since the inception of Java Web Start ... including Java Web Start 1.0 right up through the present.
With Java Web Start 1_6_0, we see evidence that Web Start is "tinkering with" the IOR that CORBA uses to communicate. In all previous versions of Java Web Start, independent of the JRE which the application uses, the stringified IOR have been the same size regardless of whether the application is deployed locally or via Java Web Start. With Java Web Start 1_6_0, the stringified IOR is much longer than the "real" IOR (again, regardless of the JRE used by the application itself). To me this smells like a bug in Java Web Start 1_6_0. Has anyone else observed this behavior?
Here are some specifics .... I've run the same client application with various JREs both with and without Java Web Start as the deployment mechanism. The application was compiled and runs against servers that are running JDK 1_5_0_09.
Here is the summary of my results from a Linux box running various JREs, various versions of Java Web Start, and also running as a non-JWS deployed application. I've listed the length of the stringified IOR in each case.
JRE 1.5.0 non-JWS client: stringified IOR length = 344
JRE 1.6.0 non-JWS client: stringified IOR length = 344 ... this, I think, excludes the JRE as the cause of these problems.
Java WS 1.5.0, JRE 1.5.0 JWS client: stringified IOR length = 344
Java WS 1.5.0, JRE 1.6.0 JWS client: stringified IOR length = 344
Java WS 1.6.0, JRE 1.6.0 JWS client: stringified IOR length = 1568
Java WS 1.6.0, JRE 1.5.0 JWS cleint: stringified IOR length = 1568
In all cases, the stringified IOR length is determined by the service receiving the message and is always running JRE 1_5_9_09 and is
always the same 344 characters in length UNLESS it was deployed
using Java Web Start 1_6_0, in which case it in nearly 5 times as big!
To me, it sure looks as if there is a problem with Java Web Start 1_6_0 to be adding so much to the stringified IOR. Note: it's hard to tell how different the underlying IOR is in the JWS 1_6_0 case because, unlike most other ORBs, the Sun ORB doesn't have a tool to extract the IOR into a human readable structure. However, I can think of no good reason why the identical application deployed using Java Web Start 1_6_0 should have a stringified IOR length that is different than that of the same application deployed in non-JWS form or should differ from the behavior seen in all previous releases of Java Web Start.
Any clues or suggestions? Has anyone else observed this behavior?
Thanks,
John

Hi.
I got a different problem. My Corba application works in JRE 1.6, but doesn't works in JRE 1.5.X. I got an unexpected error and my console shows:
getSubjectX500Principal NoSuchMethodError: java.lang NoSuchMethodError
#### Java Web Start Error:
#### null
Can you help me?

Facing problem with SOAMANAGER while working on ABAP Client Proxy

Dear Community Friends & Experts,
I am facing a problem with the SOAMANAGER, I think so. Let me explain you a scenario what I am into:
The scenario is like I need to Push data from BI table to SAP PI. We decided to go using ABAP client proxy as Sender and then will
receive it using FTP adapter to FTP address.
I have created Integration repository design object Data types, Message types, interfaces and mapping. Now I am into SAP BI and running SPROXY and generated proxy for my outbound interface. fine.
Till now its okay.Now I wanna my generated proxy to be available within the SOAMANAGER T-code I am not able to find my proxy in the list.
Can anybody send me detailed steps for outbound proxy to SOAMANAGER for creating local port for proxy. I wanna use proxy with WS adapter.
Second Query:
I need to using RSPC in SAP BI to trigger the proxy what code to write with SAP PI 7.0 version.
Can anybody bring some light to this problem...
<h5>Regards,
Gaurav Patwari </h5>

Dear Experts,
Problem solved, cannot say solved but yes its not required now as I am having Client Proxy call so it will be a native call to XI and which does not need SOAMANAGER things.
Thank you all for taking your time and writing answers.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]
Edited by: GauravPa on Apr 17, 2010 11:32 AM

Problems with Array-Parameters when using Document-Binding

Hi,
I use the following environment:
JDeveloper 11.1.1.3.0
WLS 10.3.3.0
I created a small EJB (2.1), containing a simple method, which is using arrays as parameters:
public String doTestArray(String[] aStringArray, int[] aIntArray)
throws RemoteException;
I exposed this EJB as a Webservice using JDev's Webservice wizard. I choosed Document/Wrapped-Binding. WSDL and mapping file are being generated. Made an EAR-Deployment-Profile and deployed the application to Integrated-WLS.
I tried to test the Webservice with the WLS integrated test client, which is generating the following request:
<doTestArrayElement xmlns="http://model/types/">

<arrayOfString_1>string</arrayOfString_1>

<arrayOfint_2>3</arrayOfint_2>
</doTestArrayElement>
Unfortunately, the invokation fails. WLS returns
weblogic.wsee.codec.CodecException: Failed to decode message
at weblogic.wsee.codec.soap11.SoapCodec.decode(SoapCodec.java:188)
at weblogic.wsee.ws.dispatch.server.CodecHandler.decode(CodecHandler.java:139)
That only happens in methods, which use array-parameters. Simple parameters are no problem.
However, when I use RPC/Encoded as Webservice-Binding, everything seems to be fine.
Does WLS have problems in general using array-parameters and Document-Binding?
Any help would be appreciated.
Thanks,
Stefan

Hi Josko,
Where do you have this problem 3.5 or 7.0 BexAnalyzer.
When ever heirarchy icons are created in BEx, respective hyperlink is assigned to each of them, Make sure that you dont manipulate with them,,
If you still have problem then create OSS message.
Regards,
Vinay

Strange ODBC problem with 64 bit (x64) 10.2 client

Hi,
I'm encountering a strange problem with the 64 bit ODBC driver that comes with the 64 bit (x64) 10.2 client. I have installed the client and that all went fine, and I can use sqlplus to access my databases.
Now, I have setup an ODBC datasource using the Oracle ODBC driver that gets installed and if I click on the Test button and provide correct login information I get connected just fine.
So, now if I attempt to use this ODBC datasource from a 64 bit program that I am writing, I get the following error message :
[Oracle][ODBC][Ora]ORA-12154: TNS:could not resolve the connect identifier specified.
I'm know my program is ok because I have tested it with other ODBC drivers and they work. I can't seem to determine what exactly I'm missing that is making this not work. I have set the environment variables TNS_ADMIN and ORACLE_HOME to point to the correct places - I think, but that doesn't help. Also, the Oracle \bin directory is in the path as I thnk it should be.
I'm stumped. Does anybody have any idea what could be the problem here ?
Thanks,
Nick

Hi,
I tried that and I couldn't get it to connect using the Oracle ODBC driver. It worked fine if I picked a SQL server ODBC datasource, but not an Oracle one. With the Oracle ODBC DSN, I don't even get an Oracle message, I get an ODBC configuration error.
I'm pretty sure that the Oracle ODBC driver is 64-bit since the ODBC admin program is a 64-bit program and it is able to do the test ok.
I'm think that the when using the ODBC driver, there is something in the environment or in the naming of the DSN that I am doing wrong

Problem with Leap if I use Aegis Client on winCE4.2

Similar Messages

Maybe you are looking for