Problem with Lenovo s856's Power Manager

The emergency power saving is not working. It will just start preparing  and will say failed to launch. i dont know what happen. can someone pls help me. Thanks in advance

Hi mieric56
Try this:Go to Settings->Apps->All->Find Power Manager->Press/Tap on it->Clear data ->restart your phone.
If the problem persists you could try a factory reset.Backup anything important first.
Hope this helps,
Regards.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • Problems with SpeedStep and Windows Power Management: SYSTEM FREEZES!

    I am running an E6600 on my MSI 975X PUE-Mainboard @ 2,4 GHz.  I am experiencing a strange problem that seems to be related to EIST and/or Windows Power Management:
    As soon as I set Windows Power Management to "Presentation" or any other mode that lets Windows throttle the CPU frequency the system freezes randomly: no bluescreens, no error messages...the only option is to hit the restart button...
    However, if the Windows Power Management Option is set to "Desktop" the system runs just fine!
    Has anyone else experienced similar problems? 
    Any suggestions?

    @Vaniireg
    Thanks for your reply, but I cannot agree.  Windows Power Management is needed in order to use Speedstep:
    http://www.intel.com/cd/channel/reseller/asmo-na/eng/203838.htm
    Intel clearly states that:
    "An OS that supports Enhanced Intel SpeedStep technology is required. Current supporting OSs include:, Microsoft Windows* XP SP2 includes native support for Enhanced Intel SpeedStep® technology."
    and further:
    "Finally Enhanced Intel SpeedStep technology must be turned on in the OS. Currently, for Windows* XP SP2 operating systems Enhanced Intel SpeedStep technology by default is off. To turn it on do the following: Under Control Panel – open Power Options Under the Power Schemes pull down menu To turn Enhanced Intel SpeedStep technology ON select, “Minimal Power Management,” power scheme.  To turn Enhanced Intel SpeedStep technology OFF select, “Always On,” power scheme."
    If I select the "Minimal Power Management" power scheme, the CPU frequency will drop to about 1,6 GHz and the Voltage (CPU-Z) to 1,136-1,144 V.  Whenever I do that the system will eventuelly freeze.  Skipping through a video file in Media Player Classic is sometimes enough to cause the system to hang. 
    If I select the "Always On" power scheme the system will run stable, no freezes will occur, but the CPU will ALWAYS run @2,4 GHz and the voltage WILL NOT be reduced to 1.14 V. 
    @batcook09:
    Unfortunately, a clean re-install of Windows XP Pro did not take care of my problem.  I've already tried that.  The system is not overclocked and is running with default settings.  Speedstep is enabled. 
    It is interesting to notice, that Dual Core Center always causes my system to freeze, even though Windows Power Management Options are set to "Always On".  I read a lot of bad things about this program and that is one more reason for me to avoid using it.
    Well, I have forwarded my problem to Intel and MSI Support, maybe they will come up with any solution.
    Until then, further suggestions are very welcome...

  • Strange problem with Lenovo S650

    I have an interesting problem with Lenovo S650.
    If it stay in 2G/3G mode - it connect and work in 3G network well. But if I put "only 3G" mode, it don't connect to the 3G network.
    I changed SIM-cards, modems, firmware, mobile operators -  Nothing change.
    What is the problem? Thank you.

    Because your network needs both 2G and 3G to establish an internet connection. When the signal is low ,3G is favored/preferred (WCDMA Preferred or Auto )...but that uses more power. Don't actually need 3G all the time.
    This isn't the root of your problem ...Actually isn't a problem at all .
    Now can you tell me your firmware build number(Settings>About phone.. ) ?
    Did you had this problem from day 1?
    Did you get the phone from China and flashed the ROW firmware yourself? Got the firmware from some Russian forum and changed some regional code at the first boot...by any chance?
    Beside flashing different baseband modems, have made other alterations (Like changing engineering mode settings... )
    Thanks
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I have a problem with the indicator for power on the side of my HP DV6-1341el.

    I have a problem with the indicator for power on the side of my HP DV6-1341el. Insert the adapter's power jack on the notebook in front of the LED battery charging works, windows detects that the battery is charged, but if I use the diagnostic programs, they tell me they found that the computer is running on battery power and not AC mode.
    Where is the problem?
    I have also made the maneuver for the recognition by the operating system of the battery and does not seem to be there the problem.
    If I use the laptop without battery in AC mode happens that led to the side of the notebook blinks twice, three times and then goes off when I put the power jack.

    Go into the Device Manager. Expand the battery device, select the ACPI-Compliant Battery Control Method device, right-click it and select uninstall. After you have done that, right-click any device in the Device Manager and select scan for hardware changes. Your operating system will reinstall the  ACPI-Compliant Battery Control Method device. 
    Post your results whether they are negative or positive to keep us posted.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Problems with Sybase Database for Collection Manager in SCE2020

    We have problems with Sybase Database for Collection Manager in a SCE2020. The status is:
    [root@btl-sce-cm log]# ~scmscm/setup/alive.sh STATUS OK [root@btl-sce-cm monitor]# ./monitor.sh -a -d Test: 01db_up.sh. Status: FAIL. Message: DB is not running Test: 02cm_up.sh. Status: PASS. Message: CM is running Test: 03free_db.sh. Status: PASS. Message: 99% free space in data db Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter TAAdapter [root@btl-sce-cm monitor]# ~scmscm/scripts/dbtables.sh /home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: is a directory Executing query ... /home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: is a directory [root@btl-sce-cm monitor]# df -k Filesystem           1K-blocks      Used Available Use% Mounted on /dev/mapper/VolGroup00-LogVol00                      149559596 138280700   3681636  98% / /dev/sda1               101086     20685     75182  22% /boot none                   1036624         0   1036624   0% /dev/shm
    We restored the Sybase database, but we have problems to access the database from Collection Manager and we can't obtain reports from SCE 2020.
    Here is the info:
    Problem Details: The SCA Reporter cannot generate Reports, the CM diagnostics show the following:
    [root@btl-sce-cm ~]# ~scmscm/setup/alive.sh STATUS OK
    [root@btl-sce-cm ~]# ~scmscm/scripts/dbfree.sh
    Name                    % Data Free % Log Free
    Database                        55      99
    [root@btl-sce-cm ~]# ~scmscm/scripts/dbtables.sh
    /home/scmscm/scripts/common.sh: line 43: /root/cm/bin/cm: No such file or directory Executing query ...
    /home/scmscm/scripts/dbtables.sh: line 83: /root/cm/bin/cm: No such file or directory
    [root@btl-sce-cm ~]# ~scmscm/setup/monitor/monitor.sh -d -a
    Test: 01db_up.sh. Status: FAIL. Message: DB is not running
    Test: 02cm_up.sh. Status: PASS. Message: CM is running
    Test: 03free_db.sh. Status: PASS. Message: 55% free space in data db
    Test: 04free_log.sh. Status: PASS. Message: 99% free space in log db
    Test: 05cm_persistent_buffers.sh. Status: FAIL. Message: The following directory/ies have more than 500 files in them - JDBCAdapter
    Message was edited by: EMILIO MENCIA

    Tomo:
    we have problems with our reports in Collection Manager again. We reboot the CM, but the problems continue.
    This is the log of the CM. What can be the problem? Thanks tomo
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of User Accounts during current sample period: 3.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of User Accounts since startup: 3.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Configured Number of User Connections during current sample period: 200.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Configured Number of User Connections since startup: 200.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Number of User Connections during current sample period: 15.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum Number of User Connections since startup: 18.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of user seat licenses used during current sample period: 1.
    Nov  3 11:49:18 localhost sybase_init: 00:00000:00012:2011/11/03 11:49:18.00 server  Maximum number of user seat licenses used since startup: 3.
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.78 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.86 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.92 server  Error: 1608, Severity: 18, State: 4
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 server  A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
    Nov  9 19:21:49 localhost sybase_init: 00:00000:00069:2011/11/09 19:21:49.94 kernel  extended error information: hostname: btllt0012 login: pqb_admin
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel  Cannot send, host process disconnected: btllt0012  suid: 3
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server  Error: 1608, Severity: 18, State: 4
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 server  A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
    Nov  9 19:41:10 localhost sybase_init: 00:00000:00086:2011/11/09 19:41:10.01 kernel  extended error information: hostname: btllt0012 login: pqb_admin
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server  Error: 632, Severity: 20, State: 2
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 server  Attempt to move memory with an incorrect length
    of -794444483. Maximum allowed length is 16384.
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  ************************************
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  SQL causing error : =
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  ************************************
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  curdb = 4 tempdb = 2 pstat = 0x10000
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  lasterror = 632 preverror = 0 transtate = 3
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  curcmd = 0 program =                          
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.16 kernel  extended error information: hostname: btl-sce-cm login: pqb_admin
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08d40ca3 pcstkwalk+0x31b(0x9a78fdbc, 0x9a78fb6c, 0x0000270f, 0x00000002, 0x9a78fb6c)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08d40832 ucstkgentrace+0x13a(0x68a4006f, 0x00000002, 0x0000270f, (nil), (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08ce346d ucbacktrace+0x5d((nil), 0x00000001, (nil), 0x00000003, 0x20202020)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x082f19b8 terminate_process+0xa5c((nil), 0xffffffff, 0x9a7904c4, 0x08349a96, 0x00000278)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08349acb close_network+0xf(0x00000002, 0x9ced1ea0, 0x9a790544, 0x0834902e, 0x00000006)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08349aad hdl_default+0x45(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0x9a7904fc)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0834902e ex_raise+0x18a(0x00000006, 0x00000020, 0x00000014, 0x00000002, 0xd0a5bd3d)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08357c9b memmove_error+0x27(0xd0a5bd3d, 0x00004000, 0xffffffff, 0x0896b8a4, 0x9e3d7cfc)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0833e54e recvhost+0xbe(0x9a7909ec, 0xd0a5bd3d, 0x00000018, 0x9e44d5d8, 0x9e44d52c)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08339160 recvchars+0x74(0x9ced2a1c, 0xd0a5bd3d, 0x9a7909ec, 0x000000ff, (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0831e237 tdsrecv_declare+0x207(0x00000010, 0x9cecb914, 0x9a7911b4, 0x0832dd5f, (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  [Handler pc: 0x0x0863eca4 ut_handle installed by the following function:-]
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x0832e3a9 conn_hdlr+0xe49(0x00000030, 0x9a7911c8, 0x895eed31, (nil), (nil))
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  pc: 0x08d33984 kpexit((nil), (nil), (nil), 0x9a020900, 0x00000070)
    Nov 23 08:35:23 localhost sybase_init: 00:00000:00011:2011/11/23 08:35:23.25 kernel  end of stack trace, spid 11, kpid 1755578479, suid 3
    AFTER RESTART
    ov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  SySAM: Checked out license for 1 ASE_CORE (2010.04040/permanent/148F 853E 92A9 E302).
    Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  This product is licensed to: CISCO SYSTEMS, and OEM license from Sybase, Inc.
    Nov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  Checked out license ASE_CORENov 28 09:19:06 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:06.50 kernel  Adaptive Server Enterprise (Small Business Edition)
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.02 kernel  Using config area from primary master device.
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.17 kernel  Locking shared memory into physical memory.
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.22 kernel  Internal run-time model set for Linux  - Native
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Using 1024 file descriptors.
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Adaptive Server Enterprise/15.0.2/EBF 14331/P/Linux Intel/Linux 2.4.21-47.ELsmp i686/ase1502/2486/32-bit/FBO/Thu May 24 08:15:50 2007
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Confidential property of Sybase, Inc.Nov 28 09:19:07 localhost messagebus: messagebus startup succeeded
    Nov 28 09:19:07 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Copyright 1987, 2007
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Sybase, Inc.  All rights reserved.
    Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Unpublished rights reserved under U.S. copyright laws.
    Nov 28 09:19:08 localhost rhnsd: Red Hat Network Services Daemon running with check_in interval set to 240 minutes.
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel 
    Nov 28 09:19:08 localhost rhnsd[27742]: Red Hat Network Services Daemon starting up.
    Nov 28 09:19:08 localhost rhnsd: rhnsd startup succeeded
    Nov 28 09:19:08 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  This software contains confidential and trade secret information of Sybase,
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Inc.   Use,  duplication or disclosure of the software and documentation by
    Nov 28 09:19:09 localhost cups-config-daemon: cups-config-daemon startup succeeded
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  the  U.S.  Government  is  subject  to  restrictions set forth in a license
    Nov 28 09:19:09 localhost haldaemon: haldaemon startup succeeded
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  agreement  between  the  Government  and  Sybase,  Inc.  or  other  written
    Nov 28 09:19:09 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  agreement  specifying  the  Government's rights to use the software and any
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  applicable FAR provisions, for example, FAR 52.227-19.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Sybase, Inc. One Sybase Drive, Dublin, CA 94568, USA
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Using /opt/sybase as the 'SYBASE' environment variable, found during startup.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.26 kernel  Using OCS-15_0 as the 'SYBASE_OCS' environment variable, found during startup.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  ASE booted on Linux release 2.6.9-78.0.13.ELsmp version #1 SMP Wed Jan 7 17:52:47 EST 2009.
    Nov 28 09:19:10 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  Using '/opt/sybase/ASE-15_0/pqbsyb1.cfg' for configuration information.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  Logging ASE messages in file '/opt/sybase/ASE-15_0/install/pqbsyb1.log'.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.29 kernel  Platform TCP network is forced to IPv4-only.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.32 kernel  ASE booted with TCP_NODELAY enabled.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel  SSL Plus v5.0.4 security modules loaded successfully.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.35 kernel  Network and device connection limit is 1009.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server  Number of blocks left for proc headers: 12760.
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:07.65 server  Proc header memory allocated 2552 pages for each per engine cache
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server  Size of the 16K memory pool: 307200 Kb
    Nov 28 09:19:11 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 server  Memory allocated for the default data cache cachelet 1: 307200 Kb
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel  Enabling Linux Native Kernel asynchronous disk I/O strategy.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel  Initializing virtual device 0, '/opt/sybase/data/master.dat' with dsync 'on'.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.16 kernel  Virtual device 0 started using asynchronous i/o.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.17 server  Loaded default Unilib conversion handle.
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.56 kernel  Worker Thread Manager is not enabled for use in ASE.
    Nov 28 09:19:12 localhost fstab-sync[28568]: removed all generated mount points
    Nov 28 09:19:12 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel  Either the config parameter 'use security services' is set to 0, or ASE does not support use of external security mechanisms on this platform. The Security Control Layer will not be initialized. No external security mechanisms will be supported.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.58 kernel  Unix interval timer enabled for sysclk interrupts.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.85 kernel  Begin processing to generate RSA keypair.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel  Completed processing to generate RSA keypair.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel  Encryption provider initialization succeeded on engine 0.
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 kernel  engine 0, os pid 27618  online
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00000:2011/11/28 09:19:08.94 server  No active traceflags
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.08 kernel  libomni1 - Component Integration Services: usin
    g 'Sybase Client-Library/15.0/P-EBF14165 ESD #7/DRV.15.0.3/Linux Intel/Linux 2.4.21-47.0.1.ELsmp i686/BUILD1500-093/OPT/Wed Dec 13 21:46:44 2006'
    Nov 28 09:19:13 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.10 server  Opening Master Database ...
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.66 server  Loading ASE's default sort order and character set
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.83 server  Recovering database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.92 server  Started estimating recovery log boundaries for database 'master'.
    Nov 28 09:19:14 localhost kernel: mtrr: type mismatch for d8000000,2000000 old: uncachable new: write-combining
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Database 'master', checkpoint=(1831, 20), first=(1831, 20), last=(1831, 32).
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Completed estimating recovery log boundaries for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Started ANALYSIS pass for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Completed ANALYSIS pass for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Log contains all committed transactions until 2011/11/27 13:28:54.20 for database master.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:09.96 server  Started REDO pass for database 'master'. The total number of log records to process is 13.
    Nov 28 09:19:14 localhost fstab-sync[28716]: added mount point /media/cdrecorder for /dev/scd0
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Redo pass of recovery has processed 4 committed and 0 aborted transactions.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Completed REDO pass for database 'master'.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Recovery of database 'master' will undo incomplete nested top actions.
    Nov 28 09:19:14 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.12 server  Started recovery checkpoint for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.38 server  Completed recovery checkpoint for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:10.56 server  Started filling free space info for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.24 server  Completed filling free space info for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server  Started cleaning up the default data cache for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.26 server  Completed cleaning up the default data cache for database 'master'.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:11.42 server  Checking external objects.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server  Database 'master' is now online.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.40 server  The transaction log in the database 'master' will use I/O size of 16 Kb.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.67 server  Warning: ASE_HA has no valid license and therefore is not initialized.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.73 server  server name is 'pqbsyb1'
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.90 server  Activating disk 'sysprocsdev' of size 126976 KB.
    Nov 28 09:19:15 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel  Initializing virtual device 1, '/opt/sybase/data/sysprocs.dat' with dsync 'on'.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 kernel  Virtual device 1 started using asynchronous i/o.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.95 server  Activating disk 'systemdbdev' of size 49152 KB.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel  Initializing virtual device 2, '/opt/sybase/data/sybsysdb.dat' with dsync 'on'.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 kernel  Virtual device 2 started using asynchronous i/o.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:12.99 server  Activating disk 'apricot_data1' of size 35082660 KB.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel  Initializing virtual device 3, '/opt/sybase_data/apticotdata.dat' with dsync 'off'.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 kernel  Virtual device 3 started using asynchronous (with DIRECTIO) i/o.
    Nov 28 09:19:16 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.02 server  Activating disk 'apricot_log1' of size 2980002 KB.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel  Initializing virtual device 4, '/opt/sybase_data/apricotlog.dat' with dsync 'off'.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 kernel  Virtual device 4 started using asynchronous (with DIRECTIO) i/o.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.04 server  Activating disk 'tempdb_dev' of size 1048576 KB.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel  Initializing virtual device 5, '/opt/sybase_data/tempdb.dat' with dsync 'off'.
    Nov 28 09:19:17 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.09 kernel  Virtual device 5 started using asynchronous i/o.
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.30 server  Recovering database 'sybsystemdb'.
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.32 server  Started estimating recovery log boundaries for database 'sybsystemdb'.
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Database 'sybsystemdb', checkpoint=(843, 106), first=(843, 106), last=(843, 106).
    Nov 28 09:19:18 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Completed estimating recovery log boundaries for database 'sybsystemdb'.
    Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Started ANALYSIS pass for database 'sybsystemdb'.
    Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Completed ANALYSIS pass for database 'sybsystemdb'.
    Nov 28 09:19:19 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemdb.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.40 server  Started REDO pass for database 'sybsystemdb'. The total number of log records to process is 1.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server  Completed REDO pass for database 'sybsystemdb'.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server  Recovery of database 'sybsystemdb' will undo incomplete nested top actions.
    Nov 28 09:19:20 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.41 server  Started recovery checkpoint for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.46 server  Completed recovery checkpoint for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.58 server  Started filling free space info for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.69 server  Completed filling free space info for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server  Started cleaning up the default data cache for database 'sybsystemdb'.
    Nov 28 09:19:21 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server  Completed cleaning up the default data cache for database 'sybsystemdb'.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.70 server  Boot Count: 13
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:13.81 server  Checking external objects.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:14.18 server  The transaction log in the database 'sybsystemdb' will use I/O size of 16 Kb.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.59 server  Completed recovery checkpoint for database 'model'.
    Nov 28 09:19:22 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.70 server  Started filling free space info for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.72 server  Completed filling free space info for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server  Started cleaning up the default data cache for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.74 server  Completed cleaning up the default data cache for database 'model'.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:15.77 server  Checking external objects.
    Nov 28 09:19:23 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.07 server  The transaction log in the database 'model' will use I/O size of 16 Kb.
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  Database 'model' is now online.
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  The logical pagesize of the server is 16 Kb.
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  0 dump conditions detected at boot time
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:16.08 server  Clearing temp db
    Nov 28 09:19:24 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:18.37 server  Processed 27 allocation unit(s) out of 262 units (allocation page 6656). 10% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:19.51 server  Processed 53 allocation unit(s) out of 262 units (allocation page 13312). 20% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:20.81 server  Processed 79 allocation unit(s) out of 262 units (allocation page 19968). 30% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:22.19 server  Processed 105 allocation unit(s) out of 262 units (allocation page 26624). 40% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:23.52 server  Processed 131 allocation unit(s) out of 262 units (allocation page 33280). 50% completed.
    Nov 28 09:19:25 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:24.96 server  Processed 158 allocation unit(s) out of 262 units (allocation page 40192). 60% completed.
    Nov 28 09:19:27 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:27.08 server  Processed 184 allocation unit(s) out of 262 units (allocation page 46848). 70% completed.
    Nov 28 09:19:29 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:29.94 server  Processed 210 allocation unit(s) out of 262 units (allocation page 53504). 80% completed.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.01 server  Processed 236 allocation unit(s) out of 262 units (allocation page 60160). 90% completed.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.57 server  Processed 262 allocation unit(s) out of 262 units (allocation page 66816). 100% completed.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.84 server  The transaction log in the database 'tempdb' will use I/O size of 16 Kb.
    Nov 28 09:19:32 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:32.86 server  Database 'tempdb' is now online.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.06 server  Recovering database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.08 server  Started estimating recovery log boundaries for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Database 'sybsystemprocs', checkpoint=(6333, 93), first=(6333, 93), last=(6333, 93).
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Completed estimating recovery log boundaries for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Started ANALYSIS pass for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Completed ANALYSIS pass for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Log contains all committed transactions until 2011/10/25 09:55:36.72 for database sybsystemprocs.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Started REDO pass for database 'sybsystemprocs'. The total number of log records to process is 1.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Completed REDO pass for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Recovery of database 'sybsystemprocs' will undo incomplete nested top actions.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.14 server  Started recovery checkpoint for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.18 server  Completed recovery checkpoint for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.20 server  Started filling free space info for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.39 server  Completed filling free space info for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server  Started cleaning up the default data cache for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.40 server  Completed cleaning up the default data cache for database 'sybsystemprocs'.
    Nov 28 09:19:33 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:33.41 server  Checking external objects.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.04 server  The transaction log in the database 'sybsystemprocs' will use I/O size of 16 Kb.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.09 server  Database 'sybsystemprocs' is now online.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel  network name localhost.localdomain, interface IPv4, address 10.1.1.33, type tcp, port 4100, filter NONE
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00008:2011/11/28 09:19:34.23 kernel  network name localhost.localdomain, interface IPv4, address 127.0.0.1, type tcp, port 4100, filter NONE
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the size of '128K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the size of '16K' pool in 'default data cache' to benefit recovery performance. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the '128K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  Recovery has tuned the '16K' pool in 'default data cache' by changing its 'local async prefetch limit' from 10 to 80. The original configuration will be restored at the end of recovery.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.74 server  The server will recover databases serially.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.81 server  Recovering database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.82 server  Started estimating recovery log boundaries for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Database 'apricot', checkpoint=(2358271, 12), first=(2358271, 11), last=(2358275, 172).
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Completed estimating recovery log boundaries for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Started ANALYSIS pass for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Completed ANALYSIS pass for database 'apricot'.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Log contains all committed transactions until 2011/11/28 09:16:20.68 for database apricot.
    Nov 28 09:19:34 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:34.89 server  Started REDO pass for database 'apricot'. The total number of log records to process is 846.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server  Redo pass of recovery has processed 2 committed and 138 aborted transactions.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.10 server  Completed REDO pass for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server  Recovery of database 'apricot' will undo incomplete nested top actions.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.11 server  Started recovery checkpoint for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.29 server  Completed recovery checkpoint for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.35 server  Started filling free space info for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.47 server  Completed filling free space info for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server  Started cleaning up the default data cache for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.51 server  Completed cleaning up the default data cache for database 'apricot'.
    Nov 28 09:19:35 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:35.55 server  Checking external objects.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.30 server  The transaction log in the database 'apricot' will use I/O size of 16 Kb.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.31 server  Database 'apricot' is now online.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server  Recovery has restored the value of 'local async prefetch limit' for '128K' pool in 'default data cache' from '80' to 'DEFAULT'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.34 server  Recovery has restored the value of 'local async prefetch limit' for '16K' pool in 'default data cache' from '80' to 'DEFAULT'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.40 server  Recovery has restored the original size for '128K' pool and '16K' pool in 'default data cache'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.44 server  Recovery complete.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  ASE's default unicode sort order is 'binary'.
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  ASE's default sort order is:
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server     'bin_iso_1' (ID = 50)
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  on top of default character set:
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server     'iso_1' (ID = 1).
    Nov 28 09:19:36 localhost sybase_init: 00:00000:00001:2011/11/28 09:19:36.46 server  Master device size: 240 megabytes, or 122880 virtual pages. (A virtual page is 2048 bytes.)
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel  Cannot send, host process disconnected: btl-sce-cm  suid: 3
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server  Error: 1608, Severity: 18, State: 3
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 server  A client process exited abnormally, or a network error was encountered. Unless other errors occurred, continue processing normally.
    Nov 28 09:34:40 localhost sybase_init: 00:00000:00109:2011/11/28 09:34:40.95 kernel  extended error information: hostname: btl-sce-cm login: pqb_admin
    Nov 28 09:38:27 localhost sshd(pam_unix)[29201]: session opened for user root by (uid=0)

  • Problem with BI activation in Solution Manager

    Hello SAP experts.
    I have problem with BI Content Activation in Solution Manager solman_workcenter - test management - settings - Bi reporting
    The customizing in client 010 is ok. I have BW client 001. RFC connections
    are ok. After activation of BW content in workcenter only new job in sm37
    has been planned but the button Status Report has not appeared. I installed
    newest add-on SAPK-70405INBICONT.
    Detailed description:
    After customizing in:
    SPRO-Basic Data-BW Setup
    and
    SPRO-Scenario-Specific Settings - Test Management - BW-based Reporting.
    The Activation of BW content in transaction solman_workcenter - Test
    Management - Settings - BI Reporting Settings the message appears:
    "Test Workbench Reporting - BI Content not active", after pressing save:"Settings of Test Workbench Reporting saved"
    and
    "Activation of BI Content for Test Workbench Reporting started".
    In test evaluation the button Status report doesnt show. After repeated
    activation appears the same message as in beginning: Test Workbench
    Reporting - BI Content not active.
    Thank you

    Hi Marian,
    Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
    Content Activation Log
    Log for Setup ID 20100819135323
    20100819 135323[ERROR ]: Current Status: ERROR
    20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
    20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
    20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
    20100819 135323[ERROR ]: Prerequisites check failed
    20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
    I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
    Regards,
    Rue.

  • Problem with lenovo t60 and the vga output

    I have a problem with the vga output and the lenovo t60
    When i put the videoprojector connector in to the lenovo t 60, the projector reponde is:
    Not supported
    H: 48.20khz   v: 143,10 hz
     On my desktop pc the projector function on 1024x768 resolution and the 60 hz to refresh.
    The same configurations are on my laptop and the projector doesn't function
    Please help me.

    I too have this problem. My T61 worked fine for about a year, and then suddenly would no longer project. I had made no changes to the settings for the external display, though since the problem started I've tried many combinations without success. Typically the projector reports that the frequency settings the laptop is sending are unsupported. In my case the vertical rate is usually correct (60 Hz) but the horizontal rate varies wildly.
    I suspect a hardware problem, as this post suggests: http://www.edugeek.net/forums/av-multimedia-relate​d/32128-laptop-wont-display-projector.html. (Note the message claiming that 6 out of 40 Lenovo laptops exhibited this problem.)
    Since my system is still under warranty I guess I'll have to get it repaired, but I'd rather hear of a software fix...

  • Problems with Stack 27 for Solution Manager

    We are trying to install the stack 27 ,on Solution Manager based on Nw 701, but despite we downloaded all the packages listed with the MOPZ  the SPAM transaction continue to arise consistency problems with the queue.
    The package affected seems to be the SAPKITL437, but it's not clear why.
    I'm not able to find any Oss notes for that.
    Any advise ?

    Hi,
    Did you check SAP Note No. 1274287 at section for your ST 400 version?
    Attention: The Prerequisites for Managing sytem from
    SAP Note No. 1274287 must be fulfilled at any time.
    Regards,
    Aidan

  • Screen display problem with Lenovo 3000 N100

    Hi,
    My Lenovo laptop is having a problem with screen display. When i boot the laptop (keeping the screen at 90 degrees to the key board) , there is no display . However, when i tilt it down (lesser than 45 degrees) the display comes back to normal.
    In addition, the mystery is that this doesnt happen if do the same after 5 minutes. No matter at what position i have the screen, it works perfect!
    Is there a solution for this ? Can some one explain why the display is normal after warming up, but not in the begining (booting) stage.
    Senthil.

    Lose / pinched  wires possibly.
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-63486upper
    I had to re-seat mine , and I still have to wiggle the upper right corner .
    A common issue I here,although I just purchased a second used N100 and the screen has no issures.

  • BIG PROBLEM with Lenovo A320 wifi - extremly slow

    Hello Lenovo community,
    I have a big problem with my lenovo A320 all in one.
    The wifi connection is extremly slow. I have 3 differen devices at the same place one macbook, one phone and my lenovo a 320 connectet to the same wifi. The macbook and phone get about 50mpbs but my lenovo gets only about 0.3 to 2 mbps. I have tested it wit different networks and differnet routers but is always very very slow.
    When connected via LAN works fast and well but via wifi its useless.
    I have the intel core I3 and Broadcom 802.11n with the newest drviers.
    I have tried everything possible but nowthing helped.
    Can you please help me with any solution ?
    Thank you in forward

    Thats great news for you.. it probally is a defect on my phone, I purchased it new from apple and tommorrow its going in for service..
    I have seen others with similar issues, must be a bacth, I even heard that there are 2 wifi antenas that were used on them, one of them gives problems the other not...
    Just a shame, its a great phone
    thanks for all the feedback

  • Problem with xcompmgr and i3 window manager

    Hey guys,
    Had a hard time trying to search for this problem. and nothing came up for the exact problem I was having. Anyways this is my problem. with xcompmgr is that it doesn't seem to be refreshing or something. it leaves trails of previous windows for some reason. not sure why. Anyone have this problem or someone know how to fix it??!?
    Here is a link to show you what i mean.
    http://oi45.tinypic.com/2nlaghy.jpg
    Thanks in advance for your kind and prompt attention.
    Sincerely,
    Sicariuxs

    Wow psychadelic!
    I found xcompmgr to be rather buggy when I used to use it. Try xcompmgr-dana (dcompmgr I think)  or Compton. I used to use Compton and it worked pretty well.
    I stopped using real transparency in favor of pseudo-transparency because I sometimes use the tabbed mode on multiple terminals... tell me how awesome it is to read three terminals stacked on each other

  • Problem with Lenovo 3000 N200 0769 Laptop

    Hi all,
    I'm new here and hope someone can tell me whats wrong with my Lenovo 3000 N200 0769. Two days ago I got up in the morning and turned on my laptop, it started and shut off about 3 seconds later. It does it every time I try to start. I was able to get the windows intro, and then could not sign in as the keyboard didn't work. When I unplugged the power cord it immediately shut off. Is it a Battery malfunction thats caused this or a Virus?  PLEASE I need some help here!! I googled it and on some other sites some said it was the Battery.  Thanks very much.
    Regards,
             Michael

    Also, with the battery out and AC unplugged, press and hold the power button several times. Then, re-attach AC and try to start it up. You could go into BIOS and reload BIOS defaults (that's an option) save and exit. Try to start up normally again.
    If the system boots up only part way, hangs, or shuts off then I would tend to think the fan & heatsink could be clogged. See this article on cleaning.
    http://forums.lenovo.com/t5/Lenovo-3000-and-Value-line/Lenovo-3000-Fan-amp-Heat-cleaning-N100-exampl...
    The N200 is very similar to the N100 in this regard.
    If the fan and heatsink are clean, I would check the battery - these systems don't like to run with just the AC. Try to see if it will start up from just battery with no AC, or start with battery in and AC, and then unplug AC. If it shuts off, then the battery is defective and should be replaced. Most of these, especially N100 seem to do much better with a good battery.
    Best regards,
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Problem with lenovo T530 display

    I have recently bought lenovo T530, it had win7 pre-installed. and win8 upgrade disks available. I have immediatly upgraded to windows 8 then win8.1.
    the problem is that the display is showing yello color instead of white, the yello keep flickering and although I have upgraded the drivers I still see the white colors as having spots of yello.
    please help.

    Okay here it goes...
    1.  First you need to save the T/W icc profile from this link: My custom profile
    2.  Right Click your Desktop and select "Screen Resolution"
    3.  Click "Advanced Settings"
    4.  Select "Color Management" Tab
    5.  Click "Color Management" button
    This is where it can get a little confusing but I will try to make it clear.
    6.  Now that you are at the "Color Management" window, go to the "Advanced" Tab
    7.  Click the "Change system defaults..." button
    Another "Color Management" window will open that looks just like the window you were in before, the only difference is that this one is called "Color Management - System Defaults"
    8.  Now go to the "Advanced" Tab in this new Window.
    9.  Next to the "Calibrate display" button there is a little square tick box which says "Use Windows display calibration", normally this does not have a tick in the box. Please tick this box and then press "Close"
    You will now be back at the "Color Management" window, not the "Color Management - System Defaults" window.
    10.  In the "Color Management" window go to the "Devices" Tab
    11.  Place a tick next to the "Use my settings for this device" box.
    12.  Below go and press the "Add" button.
    13.  Browse to where you saved the .icc or .icm profile you want to apply and select it.
    14.  Now select your profile and press the "Set as Default Profile" button
    If all has been done correctly you should notice a big difference on how colors are displayed. It should be for the better.  If you want to toggle between having your profile ON and OFF, just tick or untick the "Use my settings for this device" box.
    If you've been used to using your display with poorly calibrated colors, the new profile may come as a bit of a shock to your eyes but the colors should now be much closer to being correct than the default factory profile which is not even calibrated for the display.  For example, if you are using the Windows 7 theme, you will immediately notice that the greys around boxes are grey now, not a light bluish grey.
    Cheers
    W530 | 3840QM | 32g @ 1.35v CL9 1986z | 512g 840 Pro | 1t HGST 7200 | FHD AUO v.4 | Quadro K2k | GOBI 5k | Centrino 6300

  • Problem with lenovo service

    Hi,I bought lenovo y50 2 month ago, and there was a problem in the laptop screen, i sent my laptop to the lenovo lab to check it and the detect that there is a hardware problem, they give me DOA and i changed it to a new one with the same problem and again i sent it to the lab and there detect the problem and gave me a new DOA and i get new one with the same problem.i chose to keep it becouse it's hard to learn and study without laptop ( when they take the laptop they return it in 10 days and i have projects to do in the technion).after a month i detect a new problem in the battery and i've talked to them again and they said that they need to take the laptop to check it and give me a new battery.i'm a student in the electral engineering faculty and it's impossible to study while the lab takes my laptop every month to ten days.right now i'm waiting so they can check my laptop and send it to me ( i sent my pc to lab a week ago ).is that normal ?  

    Shams66,
    Thanks for your feedback and working with Serene and sending along pictures of the back of your unit.  We've checked with our engineering contacts and the advise that these 4 screw locations are for an optional VESA mounting arm to mount and suspend the system over your desk.  They are not screw locations required for proper closure of the system.
    We do not believe the screws were pre-populated. 
    The leg / support on the system is help with a release latch, and this is a design improvement introduced on newer B540 models - earlier models used perimeter screws to attach the leg.
    Do all other keys on your keyboard work properly?   If the problem is isolated to a single key, I would encourage you to contact support again and let them review - they determine that you need a replacement keyboard.   It is also potentially a software issue.
    Please let us know how this is progressing.
    Best regards,
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Problem with lenovo G570 - graphic card

    Hello,i own lenovo G570 and i keep getting this message: Display driver stopped responding and has recovered, every time I start launching any game. So basically I  cant play any game right now. I have hd 6370m and i downloaded drivers from official lenovo sites, so whats the problem, please?I really hope someone can help me solve this.

    Hi @Lefteris93 ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your I would uninstall all the software and drivers for AMD High-Definition (HD) Graphics Driver and Catalyst Control from the control panel and the Device manager.  Restart the notebook and download from here.
    Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. This will help update the drivers that have been installed on the Notebook.   If you graphics card was damaged or not functioning you would have a black or blank screen.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for