Problem with License feature in 2821

Hi,
Recently i was updating a router which had 2 ios images(spservices and advanceipservices). I needed to select advance ip services, so i ran the boot command on the router and then reloaded it.
My problem is that after the router boots up its not showing any license feature
I ran the command #sh license feature and #show license detail .
But its not showing any license.
showing error - % Error: No License Found
Please help
Regards
Aateek Singh
Network Engineer
Spooster IT Services

Hello Aateek,
2800 Series routers (along with all Genration 1 ISR's- 1800/2800/3800's) do not use licenses.
The advipservices feature set is loaded just by changing which IOS you boot to. In order to confirm you are using the advipservices feature set, perform a
#sh version
the output should start like what's below, only you want to see ADVIPSERVICES instead of ADVENTERPRISE and then whatever version you have. Any specific commands or features you need should work as soon as you confirm this. If the #sh version output says you are still using ipservices, you need to check your boot statements to make sure your router is trying to load the correct IOS file (you can watch this during the boot process if you have a direct console to the device).
Cisco Internetwork Operating System Software
2800 Software (C2800-ADVENTERPRISEK9-M), Version 12.3(8.2)T, INTERIM SOFTWARE
Hope this helps! -Mike

Similar Messages

Problems with extended features. I can no longer fill out my documents in the fields provided. The

Problems with extended features. I can no longer fill out my documents in the fields provided. The error message I get is "This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available. Please contact the author for original version of this document."

Yes. I don't have the version you pay for. I also tried the free version
of EchoSign. Maybe that caused the problem.
Any more suggestions would be greatly appreciated.
Estelle Oliansky
Estelle OlianskyRealtor, SRESCell (734) 748-2329
*3DX Real Estate *| www.3dxonline.com* | (v) 888.304.1447 ext.
102 | (f) 888.304.1456 | 42705 Grand River Ave. Ste. 201 | Novi, MI 48375*
P Please consider the environment before printing this e-mail
This electronic mail message and any attachments contain information
that(a) is or may be LEGALLY PRIVILEGED, CONFIDENTIAL, PROPRIETARY IN
NATURE, OR OTHERWISE PROTECTED BY LAW FROM DISCLOSURE, and (b) is intended
only for the use of the Addressee(s) named herein. If you are not the
intended recipient, an addressee, you are hereby notified that reading,
using, copying, or distributing any part of this message or any information
transmitted herewith is strictly prohibited. If you have received this
electronic mail message in error, please contact us immediately and take
the steps necessary to delete the message completely from your computer
system.

Problem with license in SAP_NetWeaver701SR1_2008 TRial

Hi there my friends,
can someone help me here....i installed this trial in my virtual machine, but now i'm having problems with licensing it. I have requested license like it say's in the instalation, but i still can't login with BCUSER, only with SAP*...here are some screenshot's of the SLICENSE transaction.
and then i got the file by email to install the license, it turned green (in the new licenses)...
[Image - New Licenses|http://i3.photobucket.com/albums/y51/rjmonteiro/SAP/NewLicenses.jpg]
[Image - Old Licenses|http://i3.photobucket.com/albums/y51/rjmonteiro/SAP/OldLicenses.jpg]
and if i try to logon with bcuser after this i get this error
[Image - Logon Error|http://i3.photobucket.com/albums/y51/rjmonteiro/SAP/LogonImpossible.jpg]
can anyone please help me ? i have already many things done in that system
kind regards,
Ricardo Monteiro

Hi Key,
I have found a business objects Note 1198801.
Please have a look to it.
We can find Business objects Note/KBase from here
[https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_ossnotes&query=&adv=true#]
For your reference have a look to content of that Note:-
1198801 - Error: "Crystal Reports: Application Error - Couldn't load the keydecoder.dll" when attempting to start Crystal Reports XI
Symptom
When attempting to start Crystal Reports XI, the following error message appears:
"Crystal Reports: Application Error - Couldn't load the keydecoder.dll".
Cause :
The error message occurs because the CommonFiles entry has the wrong path in the registry.
Resolution :
CAUTION The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. It is strongly recommended that you make a backup copy of the registry files before you edit the registry. For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
To resolve the error message
Click Start > Run. The Run dialog box appears.
Type "regedit" in the Open: text field. Click OK. The Registry Editor appears.
Navigate to the following key: HKEY_LOCLAL_MACHINESOFTWAREBusiness ObjectsSuite 11.5Crystal Reports.
Double-click the CommonFiles string. The Edit String dialog box appears.
Ensure that the path points to the location of <installation directory>Common3.5 in.
For example, the default location is the following: C:Program FilesBusiness ObjectsCommon3.5 in.
Edit the path as necessary.
Click OK. Close the Registry Editor.
Crystal Reports starts successfully.
Hope that helps!!
Regards,
Shweta

Problem with License server

Hi All,
I am facing problem with license server. We have installed SAP Business One , Did License import, Installed patch 15 and than again DTW and every thing. Now when I want to connect through DTW, it gives error messege : connection to license server failed . Any help on it will be highly appriciated. Thanks,
Sabita

Hi Sabita,
Is it just the DTW that fails (ie can you log in to the SBO client)?
In newer versions of the DTW, the License Server setting in the log in screen needs to have both the server name (or IP address) and port number. For example:
MYSERVER:30000
where MYSERVER is the name of the server where the license service is installed and 30000 is the port number it is running under (30000 is the default).
Kind Regards,
Owen

"Microsoft Office has encountered a problem with licensing and will need to close. If this problem persists, uninstall and reinstall your product."

Hi Guys!I am not it pro. but i need your HELP.Pls my microsoft Word and Excel starter were working fine, but after playing with my laptop, downloading , removing smth , i cannot open them proper anymore, cos this message comes up:
“Microsoft Office has encountered a problem with licensing and will need to close. If this problem persists, uninstall and reinstall your product.”What can i do to make it work fine back? plssss need Help! thank u i n advance!!!!!!

I faced similar challenge. Re-installation did not solve the problem due to unsuccessful un-installation of ‘Microsoft Click to run 2010’. The following steps worked for me. Please use your discretion to try and see if it works for you too..
1 Uninstall Microsoft office Starter 2010. If
‘MS click to run 2010’ doesn't get uninstalled use Microsoft fix it tool meant for installing and uninstalling programmes, to uninstall the same.
2 Download ‘Microsoft Office Starter 2010’ from internet.
3 Before launching, right click the executable file and click the 'properties'. Go to
‘compatability’ tab and choose appropriate 'compatibility mode' as per your OS. Tick the check box to use admin privilege under
privilege level section.
4 Launch the executable to install Microsoft Office Starter 2010 afresh. It should go through four steps during installation now. Complete the steps and enjoy. Thanks !

Problems with BW-Feature Pack

Hi experts,
we set up a ERP on MaxDB 7.6.0.6 and use this system now only for BI. The reports necessary to activate feature pack ran, but queries over fact tables are very slow.
During the search for the reasons I found the notes 976930 and 901377. The system table DOMAIN.BWTABLES does not exits and the table DOMAIN:TABLES does not contain a property/column which shows that a table is a fact table.
DOMAIN.TABLES is described as follows:
SCHEMANAME;OWNER;TABLENAME;PRIVILEGES;TYPE;TABLETYPE;CREATEDATE;CREATETIME;UPDSTATDATE;UPDSTATTIME;ALTERDATE;ALTERTIME;UNLOADED;SAMPLE_PERCENT;SAMPLE_ROWS;COMMENT;TABLEID;DYNAMIC;ARCHIVE;VARIABLE_COLUMNS;VIRTUALKEY;
SAPKBI;SAPKBI;/BI0/F0FC_C07;SELUPDDELINSREFINDALT+;TABLE;TABLE;2010-02-10;15:00:21;2010-02-10;15:00:21;2011-04-27;10:30:37;NO;?;20000;?;000000000002C4FD;NO;NO;YES;NO
Is there somebody who has the possibilty to campare this table with "real" BI system?
Thanks in advanced.
Ralph
Edited by: Ralph Breier on Apr 27, 2011 11:41 AM
Edited by: Ralph Breier on Apr 27, 2011 11:58 AM

Hi there,
the FACT attribute can be reviewed in system table SYSDD.TABLES.
The BWTABLES table has been abandoned with 7.6 - it's just not there anymore.
If you've got problem with the performance, you may want to check [SDN WIKI|http://wiki.sdn.sap.com/wiki/x/hx0B] or open a support message for that.
regards,
Lars

Problem with license file... ( Bad license file)

i have upgraded to wl6.1 ( actually i still have wl6.0 running under c:\bea
as well)... but having problems starting up the server..
its complaining about there beinf an empty license file.. when i know there
is a license file.. and i hhhave correctly run the UpdateLicense.cmd file tp
upgrade it with details from the license_new.bea file.
Here is the message when i run the server..
C:\bea\wlserver6.1_beta>"C:\bea\jdk131\bin\java" -hotspot -ms64m -mx64m -cla
sspath .;.\lib\weblogic_sp.jar;.\lib\weblogi
c.jar -Dweblogic.Domain=mydomain -Dweblogic.Name=myserver
"-Dbea.home=C:\bea" "-Djava.security.policy==C:\bea\wlserver6.
1_beta/lib/weblogic.policy" -Dweblogic.management.password= weblogic.Server
<05-Jul-01 17:05:30 BST> <Info> <Security> <Getting boot password from
user.>
Enter password to boot WebLogic server:
Bad license file
problem: BEA license Is Not Present
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
Bad license file
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Unable to start WebLogic Server !!
Empty license file
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
C:\bea\wlserver6.1_beta>goto finish
C:\bea\wlserver6.1_beta>cd config\mydomain
C:\bea\wlserver6.1_beta\config\mydomain>ENDLOCAL

Hi Suresh,
You might want to post this onto the
weblogic.developer.interest.61beta.general newsgroup. The XML developers who
monitor this group don't know much about the license processor.
Regards,
-Todd
Suresh Kumar <[email protected]> wrote in message
news:3b4492da$[email protected]..
i have upgraded to wl6.1 ( actually i still have wl6.0 running underc:\bea
as well)... but having problems starting up the server..
its complaining about there beinf an empty license file.. when i knowthere
is a license file.. and i hhhave correctly run the UpdateLicense.cmd filetp
upgrade it with details from the license_new.bea file.
Here is the message when i run the server..
C:\bea\wlserver6.1_beta>"C:\bea\jdk131\bin\java" -hotspot -ms64m -mx64m -cla
sspath .;.\lib\weblogic_sp.jar;.\lib\weblogi
c.jar -Dweblogic.Domain=mydomain -Dweblogic.Name=myserver
"-Dbea.home=C:\bea" "-Djava.security.policy==C:\bea\wlserver6.
1_beta/lib/weblogic.policy" -Dweblogic.management.password=weblogic.Server
<05-Jul-01 17:05:30 BST> <Info> <Security> <Getting boot password from
user.>
Enter password to boot WebLogic server:
Bad license file
problem: BEA license Is Not Present
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
problem: m_gpairs is null
Bad license file
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
Unable to start WebLogic Server !!
Empty license file
$$$$$$$$$$$$$$$$ License Exception $$$$$$$$$$$$$$$$
C:\bea\wlserver6.1_beta>goto finish
C:\bea\wlserver6.1_beta>cd config\mydomain
C:\bea\wlserver6.1_beta\config\mydomain>ENDLOCAL

Problem with "License is expired"

Hello guys,
I've installed the trial version of Photoshop. Now I bought the software and thus I put in the serial on the box.
Then I should agree to some License Agreements and so on and clicked "YES"... and the program suddenly was closed.
When I tried to reopen it, only a window popped up with "License is expired".
I already tried to run the LicenseRecovery by adobe.com (3 times) but it did not help.
Isnt there any file on my PC that saves the activation or so?
How can I fix the problem?

Thanks for your quick answers.
I meant the CD case by the word "box". Sorry, I forgot the proper word for it.
And it is 100% the right serial. The problem is really with my PC (the files that Adobe created on it).
This link: http://kb2.adobe.com/cps/494/cpsid_49485.html
is pretty helpful. But unfortunately my OS is Vista and so I can't open my "Windows: \Program Files\Common Files\Adobe\Adobe PCD\pcd.db"
because I do not have access to it. Does anyone know how I can delete this file?
Edit: There is another problem: When I set the date to May 31, 2009 and open Photoshop, there are also just these License Agreements and when I agree, the window closes but nothing new opens.

Problems with license upgrade on AIP-SSM

Hi guys:
I have a problem with my AIP-SSM, recently I download the latest license and I need to install in my AIP but when I try to do this I receive this error:
"errSystemError-idsPackageMgr: digital signature of the update file was not valid, use CCO to replace corrupted file"
So I download the license again, because maybe was corrupted, but I receive the same error at the time I want to install it.
Does anybody knows what this error means?
Regards

It sounds like you are attempting to install a .lic license-key file via the Update Sensor section (which is used for software upgrades/updates instead). If you are trying to install a .lic license-key file, you can do that from IDM or IME's Configuration > Sensor Management > Licensing section. Ensure the Update From: option is set to License File, then click the Browse Local… button and locate/select the .lic license-key file on your local client machine. Finally, click the Update License button to upload and install the license-key file onto the sensor.
If you try to install a .lic license-key file via the Update Sensor section, then you will encounter the error message you noted.

Problems with License extension

Hello,
i have a problem with extending of the minisap license. I follow the steps on the site www.sap.com/solutions/netweaver/minisap.asp and executed the saplicense.exe -get, but the window was opened and directly closed. So I didn't get any hardwarekey.
Further the site described, I should follow the introduction on "Installing the SAP License" on CD1 in the mini_doc.html document, but on the CD1 there wasn't no such document.
What can I do now? I need the extension very urgent.
Thanks
Regards
Nicole

Hi Nicole,
Just login to sap and execute Transaction SLICENSE.
you can find your hardware key frim here also.
Regards
Subhash

Adobe Photoshop problem with license

I have bought Adobe Photoshop CS4 (box, license for 3 computers) in 2009. I've used it on two computers with activation, but one computer had formating, and second I've lost. I don't know how to 'unactivate' them now, and when I trying to activate product on my actual computer - it says that all license keys are in use. I have whole box and papers, even facture as a proof for purchase. What I should do?

Here on this forum we can not help you because where are not employees of Adobe. The best is to contact adobe and explain the problem:
http://www.adobe.com/uk/company/contact.html

Odd problems with Spry features

I have finished a site at
http://www.magnoliaparkburbank.org
that uses many Spry features such as autosuggest, master-detail
regions and css classes built into the xml files. The site has been
developed on a Mac but I have a BrowserCam account with remote
access so I can test the site on multiple platforms and browsers.
My client is reporting odd behavior on some of the features.
Particularly problematic is the store directory section. When the
user clicks on "Neighborhood Directory" a pop up window opens with
an html page that is mostly Spry driven. The client is reporting
problems in the select menu (not all categories showing up) I have
worked hard on the autosuggest feature with the help of Donald and
Kinblas. The auto-suggest seems to work sometimes and not at other
times. The user is supposed to be able to type the complete store
name or part of the store name to see the address and phone number
of that particular store. If the user wants to search again he
clicks the search again and the fields are cleared. Sometimes
things just seems to get stuck. There is also a problem in some
browsers (Firefox) that does not allow the user to return to the
parent window. I am looking for some feedback, suggestions and/or
advice on the useability of this site. This is all complicated by
the fact that the bulk of the site is in Flash including the call
to open the browser window for the store directory.
Thank you so much for any help!

Hi Marlene,
The close window problem is due to the IE hack
window.opener='x' that you have in the href of your close window
link. If you are trying to figure out how to prevent IE from
prompting the user to see if it is ok to close the window
programatically, do a net search on "window.opener='x'" and you'll
see some pages that discuss a way of using openWindow to trick IE
into not prompting the user based on the window name ... I believe
the discussion centers around how that also works for other
browsers like FF, etc.
Regarding your auto-suggest problems, we'll need specifics
from you as to what isn't working properly, what browser and
platform, and what your expectations are in specific situations.
For example what is your expectation when your user types in
"siren" and hits return? etc.
--== Kin ==--

Problem with accessing features as a host

I just started using Adobe Connect. I created a New Meeting under Shared Meetings. When I open the room, I'm added as a participant vs. a host. Therefore, I don't have access to change the room layout, record, etc. I am listed as a host under "Role." Am I accessing the room incorrectly?
Does it matter if I create a room under Shared Meetings vs. User Meetings?
Also, how can I find which features are available with the license that I am using? I'm wondering if the license is limiting what I can and cannot do.
Thanks.

I'll make an assumption here, so correct me if I'm wrong. I believe you are using the Named Host licensing model. I would venture to guess you are in the Administrator group, and used that license/user ability to create a meeting in the Shared Meetings folder and add yourself as a Host of that room.
However, to activate (for lack of a better term) the room and allow you and others in the room to be at a role above Participant, you must be a member of the Meeting Host group. Addd your self to that group, and then go back into the room you created and you should have full Host rights. If you don't you may want to either clear your browser's cookies or wait 7-15 minutes, with the room closed, to allow the session for that room to be ended by the server, and then go back into your room.
The rooms location on the server should have zero effect on access and functionality on the room.
Here is a description of the Connect licensing and how those licenses work: Setting the Record Straight on Adobe Connect Licensing | RealEyes Media

Problems with licenser server (upgrading and uninstall)

Hi all,
i try to upgrade a 2007A Sp01 PL09 License Server to 8.8 PL12. During the Upgrade process i get th error messge:
Error -1603 Fatal error during installation
Consult windows installer help (Msi.chm) or MSDN fpr more information
i have tried this with the wizard and the single package.
SB any idea how i can fix this?
I have also tried to uninstall the server tools but this ist also dont work. After i press "Uninstall" it happens nothing. if i retry the uninstall a few minutes later i get a message like "uninstall was incomplete".
Can anyone help me?
Sabine

Hi Sabine,
You may check these links:
http://forums.techarena.in/windows-xp-support/843362.htm
http://www.computing.net/answers/windows-xp/installation-errors/121301.html
to solve your installation problems.
I concern about the patch level version of B1 2007A you are trying to upgrade. It should be the latest patch. Minimum patch level of B1 2007A to upgrade to B1 8.8 PL12 is SAP B1 2007A SP01 PL10.
Check if the package of patch level installer is not corrupted.
JiMM

Indesign CS 5.5 problems with accessibility features

I am required to create 508 accessible documents for the government agency I work for. The new features in Indesign allow you to export your document to an accessible pdf using the articles panel, export paragraph styles to tags and object tagging. My question is this. It all works fine. The tags are great, it passes the accessibility check but you would expect the order panel to match the tags order and it does not. In the training on Adobe tv http://tv.adobe.com/watch/accessibility-adobe/part-2-exporting-and-finalizing-your-pdf/ they never even look at the order panel. I always have to reoder the tags in the order panel. will Adobe be addressing this issue?

I've also posted the same problem in another thread. No matter if I use the Structure Pane or the Articles Pane within InDesign, once I open the file in Acrobat, the reading order still is incorrect. I found this solution (below) from another User, tested it, and it works. I really have an issue with the pdf "passing" the Accessibility test when the file is not Section 508 compliant.
In Indesign, reorder ALL the objects on page using send to back, starting with the last object on page you wish read, continuing until the object you want read first in acrobat is sent to the back last in InDesign. The result is that the Reading order is correct in Acrobat. Obviously, any object additions to a page means re-ordering the whole page. Changing copy doesn't affect this. Also, the order of objects on a page has no relationship to the page structure. It appears that the object reading order is as objects are added to page. Ist added (and furthest back), 1st read, last added (nearest front), last read. Shuffling the objects in the Document Structure pane has no effect on this order (and vice-versa).

Problem with License feature in 2821

Similar Messages

Maybe you are looking for