Problem with License MAC after change Time Zone in UCCX 8.02

Hi all,
Please I need Help.
The last weekend, we changed the Time Zone in we Cluster of UCCX 8.02.
Now when entry to administration page, show a warning that says.
“The Unified CCX Systems is currently using a license that has a grace period of 30 days”
How i can solve this problem. I must go back with the change , and return time zone previous ?
Thanks
Guillermo

Welcome to the wonderful world of Cisco Licensing with 8.5 (perhaps 8.0 as well). Changes to the IP address, hostname, DNS, Time Zone, and a few other fields will change your License MAC and invalidate all licenses.
Send an email to [email protected] asking them to rehost your license for the new license mac.
Tanner

Similar Messages

Problem with Push Notifications after change from 3GS to 4S

After I changed from my 3GS to my 4S I have a Problem with the Push Notifications.
I only receive them on my old device, not on my new 4S.
They both have different Phone Numbers, and i set the 4S up with a Backup from the 3GS.
How can I fix this problem?

I have the same phone, and have just had it replaced with an identical model and am having the same issue. I am going to go through Apple Care again and see what seems to be the problem. I never had any push issues with my 3G, except at the initial launch.

Problems with ALV - Excel after changing from 640 to 710

Hi all,
first i have to say, that i have tried to set this thread in the SAPGUI-Forum,
but i didn't get any answers, therefore i try it here.
I have changed our SAPGUI from 640 to 710. Now i get problems
with ALV-GRID display.
When i change the output to EXCEL-Inplace i get the Error-Message:
0K000
View cannot be switched: Product is not installed or integration is not active.
In 640 i don't have any problems. We have ECC6.
When i use GUI710 and SAP 4.6C i don't have any problems.
Simple Test is possible with SE16N and change ALV output to excel-inplace.
Can anybody help?
Thanks.
Regards, Dieter

Hi Dieter,
we had a similar problem who we resolved installing path the GUI710_1-10002995.EXE.
Have you tried to install the patch?
Bye
Giovanni Mortati

Problem with some features after changing memory c...

My N2690 cannot work with 2GB. Right now most of the functions like; Ovi, Life tools, Web browser is refusing to open.
Community Manager note: this post has been removed from an unrelated thread and the subject line changed to reflect the nature of the question.

Problem Solved!
I discovered how to locate earlier versions - I my case had to go back 3 versions of HotKey fix. For my laptop, T60 2007-49U, the latest version is 3.86.0000 - I found that 3.84.2000 restored both audio & brightness levels on screen display.
One point though, my previous display was a series of green bars - the new display is a black bar with white characters... no real problem - at least the On Screen Display is back!
Thanks for your help in suggesting I try previous versions.

Problem with restore win8 after change hardware. (GT70 0ND-492US)

Hi everyone!
I have de notebook model GT70 0ND-492US this came with one msata ssd with 128gb and i add other the same model for use super raid, that came with win8, but i make the downgrade to win7. But now i cant make the recovery to win8 with original recovery discs, the message displayed is: "cannot recovery hardware is changed" .
Can help?
Thanks!!!

Quote from: flobelix on 09-March-13, 02:25:21
Hm, seems it won't accept the oem key then So far I couldn't find another legal source for an .iso
OK! Can i use my serial for this copy? I Find from MS this: http://care.dlservice.microsoft.com//dl/download/5/3/C/53C31ED0-886C-4F81-9A38-F58CE4CE71E8/9200.16384.WIN8_RTM.120725-1247_X64FRE_ENTERPRISE_EVAL_EN-US-HRM_CENA_X64FREE_EN-US_DV5.ISO?lcid=1033
thanks so much for your help!

Problem with updating apps after changing country in appstore account

I have recently moved from France to New Zealand so I changed the country of my app store account. But now I can't update the apps I downloaded in the French store as I am in NZ with NZ store set. How can I fix that?

KiwiBens wrote:
How can I fix that?
You'll have to switch back to the French store to update those apps.

Iv'e had my mac for 2 weeks & now have a problem with safari since I changed to a wireless super hub. It will not open a web site I use my iPad & windows lap top will. Apple support say it's the DNS settings cable say there okay please can anyone help

Iv'e had my mac for 2 weeks safari was working great until I changed to a wire less super hub. Safari will not let me open & log into a web site I go on a lot. My ipad & windows lap top will on the same network. Apple have said it's the DNS setting my cable provider say it's not it's a problem with my mac. Iv'e phoned apple lots of times same with cable provider Iv'e tried a few things it has not helped solve the problem. I'm now advised to return my mac to the shop for a check. Has anyone else had this problem I would appreciate any help because I'm going round in circles.

Adding a couple of DNS numbers sometimes helps:
System Preferences>Network, select your wifi or ethernet network on the left and click on the 'advanced' button and then the DNS tab. On the left side of the window make a note of any DNS numbers listed so that you can re-instate them if necessary and then click on the '+" button bottom left of the window. Type 8.8.8.8 and click the + again and type 8.8.4.4 save the settings and try the website again.
BTW, I have the same problem with Firefox not letting me input my password in secure sites. I did find a workround in the network settings in Firefpx prefs, but it didn't stick so I reverted to using Chrome as alternative browser. No problems with that so long as you don't mind Google looking over your shoulder

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Hello, I have a problem with my mac book pro after running the battery dead on a game. The display has shrunk leaving two black margins on either side. What to do ?

Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
Clinton

Got a message that there is a problem with my Mac OS X Kernal. my PowerBook has crashed 4 times in the last week and happened when backing up to Seagate plus ext. hard drive.

my PowerBook G4 has crashed 4 times in the last week. I got a message that there is a problem with the Mac OS Kernal. Does anyone know what this means?

Kernel panics are usually caused by a hardware problem – frequently RAM, a USB device or a Firewire device. What external devices do you have connected? When trying to troubleshoot problems, disconnect all external devices except your monitor, keyboard and mouse. Do you experience the same problems?
To eliminate RAM being the problem, Look at this link: Testing RAM @ http://guides.macrumors.com/Testing_RAM Then download & use Memtest & Ramber.
Do you have an Apple Hardware Test disc? Running the Apple Hardware Test in Loop Mode is an excellent troubleshooting step for finding intermittent hardware problems. It is especially useful when troubleshooting intermittent kernel panics. If Loop Mode is supported by the version of the Apple Hardware Test you are using, you run the Extended Test in Loop Mode by pressing Control-L before starting the test. Looping On should appear in the right window. Then click the Extended Test button.The test will run continuously until a problem is found. If a problem is found, the test will cease to loop, indicating the problem it found. If the test fails, be sure to write down the exact message associated with the failure.In some cases, RAM problems did not show up until nearly 40 loops, so give it a good run.
May be a solution on one of these links.
http://support.apple.com/kb/TS3742 What's a "kernel panic"? (Mac OS X)
http://www.macmaps.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.index-site.com/kernelpanic.html Mac OS X Kernel Panic FAQ
http://www.thexlab.com/faqs/kernelpanics.html Resolving Kernel Panics
http://www.macfixit.com/article.php?story=20060911080447777 Avoiding and eliminating Kernel panics
http://macosg.com/group/viewtopic.php?t=800 12-Step Program to Isolate Freezes and/or Kernel Panics
 Cheers, Tom

Problem Changing Time Zones

Why does the Pre calendar change timezones automatically when traveling across the country? This is very frustrating! If I am in Los Angeles on Monday and get word of a meeting in New York at 12:00pm (noon) on Wednesday, I want to simply put the meeting into my calendar for Wednesday at noon. But after traveling across the country, my appointment for Wednesday has shifted forward 3 hours on my calendar because it thinks I had the meeting scheduled for 12:00pm WEST COAST TIME. The meeting now shows a start time of 3PM. If I change time zones again, the meeting on my calendar shifts again to reflect the change. My old palms didn't do this. The iphone doesn't do this. I think it is simply too much to ask of us to have to make time zone calculations in our heads before entering appointments. PLEASE FIX THIS ASAP.
DeltaDog
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

This feature can be turned off so the time zone will not be updated but the time still will be.
If you open your launcher and then look for date and time(normally on the 3rd page). Once in here turn off "network time zone" this way the time zone will not update when traveling anywhere.

Hi guy! I have been using iPhone since 2010 but now I'm facing problem with hardware still after i reclaim new iPhone some times my phone just completely blackout!! any idea??

hi guy! I have been using iPhone since 2010 but now I'm facing problem with hardware still after i reclaim new iPhone some times my phone just completely blackout!! any idea??

If there is a problem with your AppleID, you - and not the provider - must
straighten out the matter.
AppleID disabled:
http://support.apple.com/kb/TS2446
http://www.apple.com/support/itunes/contact/
https://getsupport.apple.com/Issues.action

Problem with my laptop colour changing and some time moniter screen black out

i have a problem with my laptop screen some time its working ok but some time its going to changing and blinking colours and screen shows black out and not respend for 10 minutes or more.i want a solution for this.

Hi @hpsah
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having a problem with your laptop screen changing and blinking through colours. I will be happy to help find a solution for this but you didn't give me information to work with. For future posts I suggest checking out Want Good Answers? Ask Good Questions. I will need to know what operating system you are using? What is the product number of the notebook? Does this issue happen if you connect an external monitor?
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

Problem with license in SAP_NetWeaver701SR1_2008 TRial

Hi there my friends,
can someone help me here....i installed this trial in my virtual machine, but now i'm having problems with licensing it. I have requested license like it say's in the instalation, but i still can't login with BCUSER, only with SAP*...here are some screenshot's of the SLICENSE transaction.
and then i got the file by email to install the license, it turned green (in the new licenses)...
[Image - New Licenses|http://i3.photobucket.com/albums/y51/rjmonteiro/SAP/NewLicenses.jpg]
[Image - Old Licenses|http://i3.photobucket.com/albums/y51/rjmonteiro/SAP/OldLicenses.jpg]
and if i try to logon with bcuser after this i get this error
[Image - Logon Error|http://i3.photobucket.com/albums/y51/rjmonteiro/SAP/LogonImpossible.jpg]
can anyone please help me ? i have already many things done in that system
kind regards,
Ricardo Monteiro

Hi Key,
I have found a business objects Note 1198801.
Please have a look to it.
We can find Business objects Note/KBase from here
[https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_ossnotes&query=&adv=true#]
For your reference have a look to content of that Note:-
1198801 - Error: "Crystal Reports: Application Error - Couldn't load the keydecoder.dll" when attempting to start Crystal Reports XI
Symptom
When attempting to start Crystal Reports XI, the following error message appears:
"Crystal Reports: Application Error - Couldn't load the keydecoder.dll".
Cause :
The error message occurs because the CommonFiles entry has the wrong path in the registry.
Resolution :
CAUTION The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. It is strongly recommended that you make a backup copy of the registry files before you edit the registry. For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
To resolve the error message
Click Start > Run. The Run dialog box appears.
Type "regedit" in the Open: text field. Click OK. The Registry Editor appears.
Navigate to the following key: HKEY_LOCLAL_MACHINESOFTWAREBusiness ObjectsSuite 11.5Crystal Reports.
Double-click the CommonFiles string. The Edit String dialog box appears.
Ensure that the path points to the location of <installation directory>Common3.5 in.
For example, the default location is the following: C:Program FilesBusiness ObjectsCommon3.5 in.
Edit the path as necessary.
Click OK. Close the Registry Editor.
Crystal Reports starts successfully.
Hope that helps!!
Regards,
Shweta

HT1199 I have a MacBook Pro 10.7.3 I purchased finalemusic 2011. When I try installing it, the Terminal on my macbook opens up a box and then does nothing. Is the problem with my mac? what do I do.

I have a macbook pro 10.7.3. I purchased finalemusic 2011. when I try to install it the terminal opens up on my mac and nothing happens. What do I do
and is there a problem with my mac. the program loads on my pc and it is for either windows or mac,

Yeah the default program for installing Applications somehow got changed from the proper program to Terminal.
Right click on the App .DMG file and select Open With. It should say DiskImageMounter.App. If it says Terminal then select Other, at the bottom of the list, and then find DiskImageMounter.app.
Or after you right click on it select Get Info thenn in the Open With area select Other then find DiskImageMounter.app.
By the way you are in the correct forum. It is a Mac problem.

Problem with License MAC after change Time Zone in UCCX 8.02

Similar Messages

Maybe you are looking for