Problem with Lightning by Belkin

my iPad mini with retina says,that is not certified. I bough this cable about month ago.It has been working well till today.Is it official? I can charge my iPad only with Apple Lightning?What should I do?

If the cable you purchased a month ago is not an Apple branded cable or certified "MFI" (Made for iPhone), then it may not work. Buy one from Apple or another authorized brand.
If it is an authorized cable and it has stopped working, take it back to where you bought it and see if they will replace it. Or contact the manufacturer.

Similar Messages

Problems with a powered Belkin hub

Can anyone tell me whether there's it's normal to have problems with externally-powered hubs plugged into a macbook or with certain hubs? Mine is a Belkin Hi-Speed USB 2.0 4-port P5U234. (I don't think the following problem ever happened in my old iMac G4 days, at least.)
The problem: I need the hub to run on external power because some of my devices won't run through the hub without it. But with the external power connected, the hub doesn't work properly on system startup (or restart). i.e. the hub is obviously getting power (it's red external power indicator light is on), yet none of the green lights for the attached devices are on and some or all of the devices aren't getting power (e.g. RF mouse won't work and there's a dialog saying it doesn't have enough power).
I can remove the external power cable before shutdown or restart, in which case all the green device lights are on at startup - but again the mouse won't work because of not enough power.
My workaround -- which I resignedly perform every morning before work <sigh!!> -- is to unplug the external power and plug it back in again about a second later.
I've been doing this for some months now (and every day I think 'surely this shouldn't be necessary!!'). It's bearable, but also hazardous to my data. This is because my external HD (with my TM backup) is one of the devices attached to the hub. I only need to be slightly distracted or half-awake, and I can accidentally remove the HD while mounted. I think I've probably already done this enough times despite my best efforts not to; and I'm getting regular bitmap errors from TTP on that drive.
So my questions ... Is this kind of USB hub behaviour normal generally? Or normal with macbooks generally? Or normal with certain specific hubs generally? Is there any way to stop it happening? Is there another brand/ model of hub that wouldn't behave this way with my system configuration?
Thanks.

Thanks, Kappy.
So you're saying it's definitely abnormal behaviour? And no USB hub should do this with a macbook? Yes?
(BTW returning would never have been on. I got it 2/hand on ebay, and it's always worked flawlessly for me without external power. I didn't discover this issue until I added a device that needed the external power several months after I bought the hub.)
Just before I go and buy a new hub ... Can anyone else confirm or challenge Kappy's assessment? (Not doubting you, Kappy; just don't want to risk wasting more money!!)

Any problems with lightning connector?

New 5c charged only twice and now lightning connector feels loose and wont charge.

Make an appointment at an Apple Store if there is one nearby taking the cable along with the iPhone. All package contents are included with the iPhone's warranty if determined to be a problem with the cable. If determined to be a manufacturing problem with the iPhone's lightning connector port, the iPhone will be exchanged.

Problem with Lightning Adapter after update to IOS 8.1

Dear all,
last week I updated the Iphone 5S of my wife with IOS 8.1 since that time we can not connect the B&W Bowl via lighning adapter (Original Apple).
Before never any problem. I have the new Iphone 6 but IOS 8.02 and no any problem with same adapter to connect the B&W Bowl.
I also checked in my car same problem with IOS 8.1 we can not connect but with 8.02 no problem.
I contacted the Apple support and it looks it´s a problem with the new IOS 8.1.
Does anybody have the same problems with the connection to Docking Stations etc ?
best regards
Jens

measure the speed with speedtest http://www.speedtest.net
and maybe contact your carrier

Problem with Lightning 770.

While i am testing Unigine Heaven 4.0 i get this from time to time:
Screen just got freez , then turns to black for about 4-5 seconds and back again normally.
EventViewer shows nvldd crash.
I change even PSU to another and new. And still the same problem. Its my eight card Lightning 770 and i got that issue in Heaven. I change drivers and still the same problem. Why that cards are not stable? OC is by factory i dont OC.

it could be caused by something else as 8 cards is impossible to be a problem in a row, something else is doing it!
go to your OS and go into power management and set it to high performance and make sure link state power management is turned off!
also if you have aero theme on turn it off as it can interfere with how your graphics card functions!

Problems with lightning adapter?

The lightning to 30-pin adapter - bought from Apple - does not fit my iPhone 5. Surely I'm not the only one?

Do you mean it does not fit at all or it does not fit with your case - it seems it was designed to work without a case

Problem with lightning hdmi adapter

I Just got a new lightning digital av adapter To connect my iphone 6 plus to my tv. Initially it was working great, then I received a phone call.. Since then nothing. The little blue bar comes up on the top of my iphone screen for a few seconds, then it goes away. If I try watching any video, it displays only on my phone screen. Tried connecting to my ipad mini, and it worked just fine. I'm sure there's a simple solution but I'm stumped. Help would be much appreciated.

I don't believe that is possible.
Does the projector have an audio output jack to connect powered speakers?

Problems with second 7970 Lightning Card?

Hello
I purchased the MSI 7970 Lightning in May of last year as part of a new build. The other components of the build that affect the running of the machine are:
Asus P8Z77 WS Motherboard
Intel i7 3770K CPU
16GB Mushkin Ram (991991)
Noctua NH-U12P SE2 Cooler
Samsung 830 SSD x2
Samsung Spinpoint F2 1TB HD
Corsair AX850 PSU
Windows 7 Home Premium
USB 3.0 PCIe card with 2 internal and 2 external sockets
Sony CD Drive
With buying such high end products I thought I would have an easy hassle free build as I have built computers before with only one problem build that resulted from a faulty stick of memory. I didn't intend to overclock at all initially and intended but wanted the option to if I needed to in the future.
How wrong was I? The first Lightning card was faulty and would crash before it finished the Kombuster benchmark. The system also suffered from continual 'AMD Driver has stopped responding and has recovered' stutters and occasional crashes even on the desktop. I contacted the merchant I purchased it from and arranged a return. It took a few weeks but I did eventually receive a replacement card through MSI.
Excuse the pun, but Lightning couldn't strike twice I thought, and the next card would work. However, I still got the 'AMD Driver has stopped responding and has recovered' reports and the occasional crashes. This card did at least complete the benchmark so I kept it and put it down to driver issues.
In my quest to resolve the issue I have tried the following:
I trawled the internet looking for probable causes and have tweaked the motherboard bios according to what was recommended on Asus forums to no avail.
I have downloaded the latest bios for the motherboard
I have used the most stable settings recommended in bios so as to cause least stress on a non-overclocked CPU
I have set up my SSD's in non-raid as I read Lucid Virtu MVP doesn't like that
I have done a fresh install of Windows 7 each time I downloaded new drivers for the graphics card so that there could be no old files affecting the driver's operation
I have used graphics drivers from the MSI site for the 7970 and also from AMD without success
I have run Memtest which came up with no errors.
I have also tried using just 8GB of the RAM in various configurations on the off-chance it was a faulty stick despite the Memtest result.
I don't have limitless hours to spend trying to rectify problems with my computer. I tend to work on it when I take a holiday but, again, I can't continually take up all of my holiday time trying to sort this out. Unfortunately many moons later I have still not got a stable computer that is usable (it is intended for my work primarily so i do need it to be stable. I can't afford a crash in the middle of doing my work).
I'd like to get this rig working before the build becomes obsolete. I have built several computers before but would not consider myself an expert so please don't get too technical with the jargon.
I would welcome any suggestions even if it is to arrange another RMA for the 7970.
Thanks in advance
Trevellion.

Ok, I did a fresh install. At first I thought it had been the Lucid MVP software which was causing conflicts because the system appeared stable. The computer would even recover from sleep mode (the stage where the fans stop) without mishap which had never been able to before. Unfortunately, shortly afterwards I got the dreaded hang and the message 'AMD driver stopped responding and has recovered'. It now seems to do this every time I switch the computer on now. I just don't feel I can use this computer in it's current state for work as it's too unreliable. Once the problems start they become much more frequent.
When I enter the Action Center, click 'Maintenance' and check under 'Review your computer's reliability and problem history', I can see multiple reports of 'Video Hardware Error'
Clicking on the report gives this message:
Description
A problem with your video hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name:   LiveKernelEvent
OS Version:   6.1.7601.2.1.0.768.3
Locale ID:   2057
Files that help describe the problem
WD-20130102-0601.dmp
sysdata.xml
WERInternalMetadata.xml
View a temporary copy of these files
Warning: If a virus or other security threat caused the problem, opening a copy of the files could harm your computer.
Extra information about the problem
BCCode:   117
BCP1:   FFFFFA800B88A4E0
BCP2:   FFFFF8800596CDB8
BCP3:   0000000000000000
BCP4:   0000000000000000
OS Version:   6_1_7601
Service Pack:   1_0
Product:   768_1
When I request Windows to check for a solution it comes up with nothing.
- Is there anything in this message that gives useful info to pinpoint the problem? I'd be grateful for any more advice on this.
Regards
Trevellion

Thunderbird 13.0.1 with lightning 1.5.1 problem with invitation

Hi all,
since the recent update to thunderbird V 13.0.1 with lightning 1.5.1 invitation with calender server 6.3 do not work anymore. Does somebody have the same experience?
What is the problem and is there any solution?
Thanks for any hints.

This was an issue with lighting 1.5.1 and is now fixed in the latest lightning release 1.5.2

Boot problems with Belkin USB hub

I can boot to my internal drive with the Belkin 7-port hub connected. But I can't boot to the System Start-Up Disk or to my external with the hub connected. And once I try, I can no longer boot to the internal until I disconnect the Belkin hub.
I have heard their may be hub problems with the MBP and also with the Belkin hub. Any insight would be appreciated.

These are interesting problems. I have a Belkin hub and have been having long boot times (sometimes 5 or 6 minutes) with a blank blue screen for most of the time. I get partial relief by disonnecting the hub. I also have an SD card reader attached to the hub (Memorex brand), so I'm going to try disconnecting that to see if it helps. One noteworthy thing is that these problems are new, whereas the Belkin hub and the Memorex SD card reader have been attached to my MBP for a long time.

Problem with iBook G4 and Belkin KVM switch

I purchased an iBook G4 a few months ago, and then recently got a Belkin KVM switch to share a monitor with my Windows XP computer. The switch is powered over USB (so uses a USB mouse and keyboard). It worked great up until recently. Now, whenever I switch over to the iBook, it shows the OSX desktop, and you can hear the USB devices (mouse and keyboard) "unplug" from the XP box (familiar USB sound on XP). Then, after about 2 or 3 seconds, it goes back to the XP display and re-enables the USB mouse and keyboard in XP. The only thing I can figure is that the KVM switch is not getting any or enough power from the iBook USB to let it know it's there. I should mention that the only thing I did different in between the time it worked and started to not work was plug in an M-Audio Fasttrack USB guitar device to the iBook at the same time. Both the KVM and Fasttrack worked together only once. Now, the KVM won't work, both alone and with the Fasttrack. I have used the Fasttrack before and it worked just fine, but this was the first time I used it with the KVM together.
I have seen a few posts on this general topic, but none that I saw had any possible solutions. Could it be an OSX update that broke this somehow? Thanks.
iBook G4 Mac OS X (10.4.4)

Well, I managed to figure out the problem. I called Belkin, and they suggested unplugging everything and then plugging it back in. And, wouldn't you know, it worked. I'm not sure why, but I'm not complaining. So, if anyone else runs into this same issue, try this.

Problems with a Belkin N wireless router

Weird problem I'm having.
Whenever I wake up my g4 powerbook from sleep, I can't seem to connect to the router despite having a full airport signal being displayed on my laptop. I have to "turn airport off", wait a few minutes and then turn it on again, 2 or 3 times before it connects again - despite the airport signal being at maximum strength. I also have an iPod touch which never has this problem and always connects first time. My laptop also has no problems connecting to other routers when on the move, just this one.
I did speak to Belkin who suggested the laborious process of changing the wireless channel until I find one that works well. I have the same problem on every channel. I'm beginning to think this is a specific problem between my router and my laptop as both components seem to be working in other pairings.

I have the same problem, but it's only one of the problems since 3.1 update:
1. Wifi Problems, like described in this topic
2.
Bluetooth disconnects after a few minutes from my car phone system, after another few minutes it reconnects.
3.
My iPhone is very slow. If I press the home button then it needs about 5 seconds to show the unlock slider. then I will unlock, nothing happend and other 5 seconds later the phone unlocks. To open the sms application sometimes needs many seconds. sometimes it's not possible to unlock the iphone and I have to reboot it.
I hope apple will provide a bugfix quickly, before that I never had problems with my iPhone.

Problem with gtx 580 lightning total available graphics memory

i got a problem with total available graphics memory with my gtx 580, it shown 3315MB only in nvidia control panel.. but i just saw people with same gpu with me has 4000+MB..
can someone help me please, i need to increase it to 4K+MB
my mobo is asus p8z68-v
and 4GB of RAM 2GBx2
CPU: i7 2600k

Quote from: limousine on 14-October-11, 19:17:12
i got a problem with total available graphics memory with my gtx 580, it shown 3315MB only in nvidia control panel.. but i just saw people with same gpu with me has 4000+MB..
Nvidia panel displays complete rubbish.
They also count some system memory with the amount of vga memory, which, with dedicated videocards these days, is to no point, since the card will never be able to use it.
Your card has, like Svet already said, 3072MB dedicated videomemory and thats all its gonna utilize, since thats the amount of VRAM on the pcb.
So your buddies with 4+GB VRAM are just showing off stuff they cant use and Nvidia controlpanel shows numbers and amounts of VRAM, you'll never have available, just like that stupid Windows Performance Index shows some numbers about your system that in reallife mean diddlysquad.
Besides, there arent any 580GTX's outthere with more then 3GB VRAM aboard.
Long story short, dont get all hyped up by numbers, you got what you paid for and there's nothing wrong with your amount of memory on that card.
Edit:
With my system Nvidia says I got 3071MB of video-memory available, but 1280MB is dedicated, dedicated being the true amount the card wil ever use, since my card has only 1280MB and not 3071MB.
Like I said they count some system-memory with it, although the card will never ever be able to use it, its just to screw people over.

Problems with Zen 16GB (and contacting customer suppo

I got some odd problems with my player.. I tried to contact customer support with that email whateverformthingy but it just always returned me to starting page of creative (the one where you choose region/language) when I clicked Submit.. No autoresponse either.
So, GJ with customer support. I hope, whatever the problem is, it will be fixed soon.
Anyway, here's what I tried to send to customer support:
"Hey,
I got 6GB Zen at Christmas and its acting just plain weird at the moment:
When connected through USB player
*keeps blinking full green battery&empty battery with lightning bolt over it
*reboots itself time to time. I was about to move files over and it just kept rebooting every 5~0 seconds until I un-plugged it and plugged to another USB port - after that it worked for couple minutes at started same behavior again. After I got the player it worked fine, no rebooting on it own as I moved couple GB music to it..
When not connected
*player turns display on for couple seconds every ~hour~couple hours. It doesn't show any Creative or Zen logos, its just blacklight on with full brightness for couple seconds after which it turns off again
*the battery dies fast.. possibly because of the display blinking on all the time?
The player upgraded firmware on it own when I installed software, so it has been .20.02 all the time. Also tried reinstall firmware with the recovery tool.
Any help would be welcome before I start fix things with sledgehammer.
I'd guess that full green battery&lightning bolt over empty one means battery is critical? However, the player doesn't attempt to recharge battery. Unless I remember terribly wrong, the recharging animation is empty battery filling in blocks and getting empty again, if you understand what I mean.. Anyways. What really irritates me is the player rebooting itself when I try to recharge/move files to it and that blinking display on when I don't use it..
Any help? Someone go poke the guy who's supposed to keep customer support's emailform working?
-Lanka
..or maybe email form didn't like me suggesting sledgehammer.

Thanks.
Also apparently my first message did reach customer support through email form.. Suppose I was just expecting to see something like "Message sent" after I clicked Submit - not getting bounced back to region selection.
I'll continue this with customer support.
-Lanka

MacBook Pro 15" Late 2011 Problems with iMac 27" Late 2009 TDM

Hi,
I just got problems with my iMac 27" Late 2009 (Mini-DisplayPort) and my MacBook Pro 15" Late 2011 (Thunderbolt).
When I try to use my iMac as external monitor for my MacBook, there are massive glitches and graphical bugs on my second screen.
I bought a MDP-to-MDP wire from Belkin which works perfect on other computers.
I tried these things:
- Disconnected MagSafe from MacBook + unplugged all USB devices + switched graphics to discrete.
- Shut down all computers ... then booted MBP, iMac and triggered CMD+F2
- SMC, PRAM reset on both devices
The cable works, because:
17" MacBook Pro Late 2011 works perfectly on my iMac screen with my Belkin wire!
I connected my MacBook Pro 15" to a 27" Cinema Display and it works flawless.
After that I plugged it out and tested it again with my iMac screen -> suddenly it works.
Retriggering CMD+F2 or replugging breaks it again with massive bugs.
The MacBook Pro 17" is on 10.7.2, 15" is on 10.7.3, but I also tried to trigger dual screen in 10.7.0 setup with the same issue.
Maybe its a problem with the internal 6750M of my MacBook Pro 15"?
The 6770M of the 17" is working well.
Sample Video:
http://www.youtube.com/watch?v=W_pgc52syes
All updates/firmware updates of iMac and MacBook Pro are installed.
Any solutions?
Greets,
Kai

Since this is a user to user forum with no employees participation, your plea is a good a screaming into the wilderness. I suggest that you post your thoughts here:
https://www.apple.com/feedback/

Problem with Lightning by Belkin

Similar Messages

Maybe you are looking for