Problem with Lightroom-HTML-Gallery

Hi Adobe-Team, I like your gallery in Lightroom 3 but there is one problem! If I write the title to the photos, google can't read it - so it is not possible to find the photos in the internet! Google seems to read the words above the photo. So it thinks the title is "zurück  - Index - weiter" (in German) or in english "back index next". Could you add the possibility to write the title of the photo next to the upper side of the photo? Would be phantastic!! it would be also nice to get the possibility to switch the language of the "back - index - forward" Best wishes, ralph

Please be clear enough...your problem was? I suggest just drop the porn lol...
We can help you out if you clearly state your problem then you'll be helping us as well.

Similar Messages

  • How do I create an Lightroom HTML Gallery and preserve the - in the file name?

    How do I create an Lightroom HTML Gallery and preserve the - in the file name?
    The hyphen (-) is more search engine friendly, so I label all my photos using hyphens (-) to separate the keywords in the file name
    Here's a sample file name - it's for the "Guess Where Berkeley" flickr site
    guess-where-berkeley-serkes-xx-s-curve.jpg
    I created a Lightroom HTML Gallery and posted it to the following link.
    http://www.berkeleyhomes.com/tests/lightroom/lightroom-test-1/
    Though it looksl like the HML gallery shows the original file name in the web page, it looks like Adobe Lightroom modified each photo's file name by changing the - (hyphen) to an underscore (_)
    Originally
    guess-where-berkeley-serkes-xx-s-curve.jpg
    After Adobe created the HTML photo gallery the name became
    guess_where_berkeley_serkes_xx_s_curve.jpg
    Is there any way to preserve the – rather than the _ character
    Thank you!
    Ira Serkes

    InDesign's interactive PDF support is a small subset of what you can do in Acrobat Profesional.
    I think you probably want to create a button (or change an existing button) in Acrobat Pro that causes Acrobat to close the document -- that should be analagous to "exitting the CD." I assume your autorun file is opening the PDF in Adobe Reader? You have not included it and are not specific, so it is tough to say.
    I believe in Acrobat Javascript you can close the document with this.closeDoc(). You'll probaly need to ask on the Acrobat forums (possiby Acrobat Scripting) for more detail.

  • Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem net ti

    Have a  problem with Lightroom 5.4.  Since the program crashed yesterday it won't launch, it comes up with the message "Lightroom encountered an error when reading its preview cache and needs to quit".  "  Lightroom will attempt to fix this problem next time it launches".  Except that it doesn't, I keep getting the same message and the program closes.  Does anyone know what I  can do to repair it?  Can't back up, can't do anything.

    There are dozens of threads in this forum that describe the fix

  • After years of never a problem with lightroom started with lightroom 5 yesterday and today all of a

    After years of never a problem with lightroom, yesterday i started wiith Lightroom 5 and today all of a sudden in development mode everything just stopped working. No matter what I do none of the sliders have any effect on the picture whatsoever.
    Please help Duncan

    you'll need both serial numbers to install the lr 5 upgrade.
    if you purchased and downloaded lr 4 from adobe or registered with adobe, you may be able to find your lr 4 serial number under the account used to make that purchase/registration (not necessarily your current adobe id), Adobe ID
    and adobe support may be able to help you, contact adobe support by clicking here and, when available, click 'still need help', https://helpx.adobe.com/contact.html

  • I have a problem with the effect gallery and the saving libraries in Illustrator CS6

    Hi everybody
    I have a problem with the effect gallery and the saving libraries in Illustrator
    1. When you go to to effects > effect Gallery the the sketch filter always is black and white. Is this normal? In Photoshop you can set your background and foreground and the sketch effects takes those colors. Is there any way to do this in Illustrator? I have tried changing the colour of the fill and stroke but nothing...
    2. In the same area as before effects > effect Gallery .... In Photoshop you can add multiple filters with the create new button. Always is off is there anyway to make it available? or the only way is to by creating several individual ones and manage then in the appearance panel ...
    3. I saved a brush library and now it appears in the user defined area so I can get it in any document, that is good but any one knows how to delete a user undefined library?
    Many thanks in advance for the help .... I look forward for the reply =)

    I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
    Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
    Please, somebody, HELP.

  • In FF4.0.1 problem with using HTML creator in WebCT. WHY? Not a problem in FF4.0.0

    In FF4.0.1 problem with using HTML creator in WebCT. WHY? Not a problem in FF4.0.0

    Hi Shane,
    I passed through all the described problems in the list, and after doing several tests the error that you described is always present if the "jpcsclite_en_US.properties" is not present in the same place of the "jpcsclite.properties". I really don't know the reason, I just copied and pasted the same file, renamed the copy and the error was gone... though both of them include the line where the .dll is found!
    That's how it worked for me, but if anybody knows how it works without that dirty trick, it would be good.
    Regards,
    Leandro
    PS: Just in case that somebody is using the version JCSDK3.0, I did not find the .dll in that version, but in the JCSDK2.2.2 *(:-S)*

  • Lightroom HTML Gallery - interesting tidbit

    While browsing through the transformer.xslt for the Lightroom HTML Gallery, I found a template that suggested interaction between Lightroom and the generated web gallery, specifically:
    When you display a single image in the web module preview, the filmstrip will automatically highlight the respective image in Lightroom. Click enxt or previous, and the filmstrip will update.
    Works really well, and is a nice touch for those using the original HTML gallery. Looking at the code, this will not exactly be easy to reproduce for others (like me) looking to code their own gallery...
    Alexander

    I have created a site
    http://www.lightroomgalleries.com that will show you how to make your own template or customize the one i have already created. Also have a look at Sean McCormack blog.

  • Problems with flash photo-gallery xml

    Hello,
    I need help. I have bought your photogallery template and i
    am having problems with it.
    When i test the gallery on my portfolio website (html) all it
    comes up is the background, the pictures and thumbnail pictures
    wont load. I am putting the files in the right folder and using the
    swf in an html (dreamweaver cs3). what is it happening?
    I dont know xlm. Plz give me a hand??
    Thanks

    Hi DZ,
    I am testing it locally. I didn't even upload anything yet.
    And yes, i put the swf into my html portfolios page (dreamweaver
    cs3) and tested locally. the pictures wont show up, only the bg for
    the photo-gallery. I bought this template here at the
    exchange

  • Lightroom HTML Gallery paths

    System = PC, Version = 1.4.1
    When uploading an HTML Gallery, the sequence of folders used to hold the images includes a folder called 'bin'. In IIS7, it would be required to create a 'HiddenSegement' section in the site's web.config file in order to allow browsers to view files who's full URL includes that folder name, such as the images.
    The problem with allowing this is that IIS7 would then allow all folders like 'bin' to be viewed, which isn't what I'd prefer. Also, having to manually modify web.config might not be straightforward for all users.
    Would it be possible to allow the paths used by the HTML Gallery upload to be customized, so that they don't include 'bin'?
    Thanks,
    Simon

    You could edit the gallery. There's a wealth of info in the new SDK on web.

  • Problem with Lightroom and Epson Printer

    I'm suddenly having problems printing from Lightroom. I have Lightroom 1.4.1 installed on an iMac G5, and have an Epson Photo Stylus R2400. I've been using this combination from the beginning with no problems. Now suddenly when I try to print I get an error message that says Media is out or not loaded correctly. Neither is the case. I have tried restarting my computer, the printer and everything else I can think of, but nothing works. I can print from any other application without problems, so I'm assuming it's an issue with Lightroom.
    Has anyone experienced anything similar? I was going to uninstall lightroom and do a reinstall but I can't find my installation disc. Now I'm at a loss to figure out what to do.
    Thanks,
    Craig

    Try deleting you prefs file and/or print templates.
    Lightroom is unique to many other programs in that it saves and restores printer settings. Some bad data may tried to be passes. A "fresh start" might help.

  • Problem with Lightroom and Infrared Photography

    This problem is specifically related to using LR & PS to process Infrared images. I apologize if this forum may not be the correct place to ask this question.  I am having problems processing Infrared Images when using LR & PS.  I take my IR images with a 530 IR conversion to a Canon G12 camera.  I learned early on Adobe products don't play well with IR images (they come in magenta when importing ) so I bring IR images shot withmy G12  into my computer with Canon Digital Photo Professional and then work in LR & PS from there. 
    If I then directly open this imported image from my hard drive into Photoshop and try and do adjustments such as blue sky adjustments with a red/blue channel swap, it works fine, just as I would expect.
    (If you are not familiar with IR processing, I understand this introduction and question will not make sense)
    But when using Lightroom, I sometimes have issues. I always import all my images into LR. Even with IR images, after using DPP to bring them to my computer, I import them into LR for cataloging purposes and to make other potential adjustments. Then my usual workflow is to move photos from LR to Photoshop via the "edit in" command. This opens a dialog box giving a choice of "edit a copy with LR adjustments" which is the default option and the one I always use, or "edit original".
    Here's the interesting thing I finally discovered.
    If I send the photo from LR to PS using the "edit a copy with Lightroom adjustments" option, I get a bad blue sky effect, where the sky is green and the foliage is pink instead of the sky being blue and the foliage yellow. But if I send it to PS using the "edit original" option, the blue sky effect works fine.
    So there appears to be an issue when tring to send IR images from Lightroom to Photoshop. Any thoughts?
    Thanks,
    Matthew Kraus

    Thanks so much for working on this.
    I fear the behavior you noticed was just due to the fact I cheanged the
    file from 16 bit to 8 bit so the size was smaller and I could easily email
    it.  When I open any of my regular 16 bit files, whether I send them to PS
    as "edit original" or "edit copy with lightroom adjustments", they both end
    up as 16 bit and as far as I can see, seem the same, though obviously they
    are not.
    I don't really have a preset, but I'll walk you through the process.
    1. Choose Channel Mixer from the Adjustment Pannel
    2. Make sure the output channel is red, change the red channel slider from
    100% to 0% and increase the blue channel slider from 0% to 100%.  You can
    type in the values.
    3. Change the output channel to blue.  Increase the red channel from 0% to
    100% and the blue channel from 100% to 0%.
    This is supposed to change the sky from brown to blue and the foliage from
    blue to yellow and is what happens when you use the "edit original"
    option.  When you use the "edit copy with lightroom adjustments", the sky
    turns green and the foliage pink.  So you get 2 different behaviors,
    depending on which option you use to bring the image from LR to PS.
    That's my question, why do you get 2 different behaviors?
    Thanks,
    Matthew Kraus

  • Problem with index.html.  Help!

    I am having a problem with the index.html. In iWeb my site looks perfect. When I publish it to a folder and then open the index certain media is missing but just on one page.
    I have tried deleting the published site from the folder and re-publishing but nothing seems to work. Same result...
    Even more interesting, I uploaded the site almost a month ago and everything was fine until I noticed last week that my pics on one page had been completely erased. What could cause the change? I didn't upload a new version of the site.

    Even more interesting, I uploaded the site almost a month ago and everything was fine until I noticed last week that my pics on one page had been completely erased.
    Please provide your url so we can see what is happening.
    The index.html file plays no role in what you are describing.

  • Problem with opening html page in Dreamweaver

    Hello,
    I would like to ask the forum because I have a problem with Dreamweaver 8.
    In the past when I work with my PC on Windows XP I didn't have this problem.
    Now I have a new PC with Windows 7 Familial Edition Premium.
    I can open he most pages I would like, .htm particuliarly but some of them like .html don't opened in Dreamweaver 8
    on PC with Windows 7.
    Example:
    With this page: http://www.pb-veille-consulting.com/veille.html
    I can open it with Dreamweaver 8 under Windows XP on my portable PC.
    But I can't open it with Dreamweaver 8 under Windows 7 on my fix PC.
    Where is the problem?
    You could watch the code of this page and perharps give me answers from my question.
    Thanks a lot.
    Patrick.

    It could be that Extensions.txt and MMDocumentTypes.xml do not have the full set file extensions.
    The first one can be located at ~username/AppData/Roaming/Adobe/Dreamweaver CS6/en_us/Configuration and needs to have HTML added to line 1
    The second one can be located at ~username/AppData/Roaming/Adobe/Dreamweaver CS6/en_us/Configuration/DocumentTypes and needs to have HTML added to line 3 so that it looks like
    <documenttype id="HTML" internaltype="HTML" winfileextension="html,htm,shtml,shtm,stm,tpl,lasso,xhtml" macfileextension="html,htm,shtml,shtm,tpl,lasso,xhtml,ssi" file="Default.html" writebyteordermark="false" mimetype="text/html">

  • Exposure problem with Lightroom 4 CS5 and Raw 6.7

    Hi all
    I have recently upgraded from Lightroom 3.6 to the new Lightroom 4 and am genrally pretty happy with it, I tend to use it along with photoshop CS5 extended and also imagenomic Portraiture, but I have found an annoying little problem in doing this and something that I never suffered with when using Lightroom 3.6 and it is this...
    when I take an image from Lightroom 4 and click Edit image in Photoshop CS5 and then use Imageonmic to soften skin etc all seems to work well I then carry out any touching up within Photoshop and once finished save it back to lightroom for any final tweaks etc which is fine and all works smoothly, except once I have saved it back to Lightroom the exposure has been pushed up about 3-4 stops at least , meaning I then have to pull it down again and this can sometimes result in extra editing I could do with out. now I know its not the end of the world and is probably just a bug that I'm hoping will be sorted within Lightroom 4 but I just wondered if anyone else has had a similar problem, is it a bug or am I doing something wrong? (although I'm doing the same with Lighroom 4 as i used to do with LIghtroom 3.6 and that worked fine)
    Oh one more thing I should mention to get lightroom 4 and CS5 to work properly together I had to go into the Adobe Labs site and download the Camera RAW 6.7 software for CS5 so it could also be a bug here i guess.

    There have been several posts over on the Lightroom forum, and other non-Adobe forums also, about this issue: it seems that there's a bug in ACR 6.7RC which causes the image to be over-expose, compared with the setting applied using PV2012 in LR. I guess this is the kind of thing a Release Candidate is supposed to flag up! I was all set to upgrade my own ACR to ensure that PS would recognise my LR4 edits (I normally avoid RC versions and wait for the final), but all the reports of this problem have stopped me from doing so.
    In the meantime, best option so far as I'm aware is to process the image in LR (you get the option when you choose to edit in PS), meaning that it does all the rendering before passing it over to PS (otherwise, ACR handles the conversion of the raw file into TIFF). This does however mean that smart-objects and so on are temporarily out of the equation.
    I'm sure this will all be resolved pretty soon.
    Edit: in fact, one of the posts I mentioned is about ten posts down in this very forum: http://forums.adobe.com/thread/974963?tstart=0
    M

  • Printing layout problem with Lightroom CC 2015 Release

    Hello,
    I am working with the following configuration :
    MacBook Pro (15-inch, Mid 2010)
    OS X Yosemite Version 10.10.3
    Adobe Photoshop Lightroom CC 2015 Release
    EPSON Stylus Pro 3880
    I tried to print two images on a Super A3 paper sheet with an EPSON Stylus Pro 3880 directly from Lightroom and here is an example of what I expected (I resized and added a black border for better visibility on the forum):
    This is the preview I have in the printing module of Lightroom and this is also what I have when I print to a JPEG file with Lightroom.
    Sadly, after I launched the printing job, this is what came out of the printer:
    As we can see, the layout of the two pictures has been shifted toward the top of the paper sheet (cropping the top of the first image in the process) and about 30% of the right part of the layout has not been printed.
    Do you have any idea of what I am doing wrong here?
    For your information, I do not print very often so I am not 100% sure that I set everything correctly. However, I have been successfully printing in the past and it was with the same MacBook Pro on the same EPSON Stylus Pro 3880 printer but it was with OS X Yosemite Version 10.10.1 and with Lightroom 5.x (I cannot remember exactly which version).
    Moreover, because my print was urgent, I retried with a Windows machine running Lightroom 4.x with the same printer and it was a success. So I doubt that my initial settings on my MacBook Pro were wrong although I am not 100% sure.

    I am in France and I found out that EPSON is providing at least two different files for its v9.33 driver that relate to the Stylus Pro 3880 with OSX:
    epson16738.dmg: US version (https://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=141552&prodoid =63085147&infoType=Downloads&d…)
    epson379436eu.dmg: French version (Support et téléchargements - Epson Stylus Pro 3880 - Epson)
    and I realize that I was using the US driver which.
    After few minutes of refection, I realized that the 3880 driver that I installed on my MacBook pro was the only piece that was present when my prints failed and absent when my prints succeeded. So I though it had found out the cause of my problems until I tried with the french driver (epson379436eu.dmg)...
    In the meantime Adobe has release of new version of lightroom so let me recap my new configuration:
    MacBook Pro (15-inch, Mid 2010)
    OS X Yosemite Version 10.10.3
    Adobe Photoshop Lightroom CC 2015.0.1 [ 1018573 ] (info available in Help menu > System info > Lightroom version)
    EPSON Stylus Pro 3880
    Epson driver v9.33 epson379436eu.dmg
    ... and the result of my test is ... nothing at all! Lightroom sends the the print job to the printer but nothing comes out of it.
    However, when I printed to a file from lightroom and then tried to print this file with OS X Preview on the Epson 3880, it worked perfectly.
    It also worked when I printed from Photoshop CC (2014.2.2).
    It also worked when I printed from Lightroom but with a different printed and driver (Canon MF8580Cdw).
    Therefore, among the five elements of my configuration cited above, there is none for which the printing job is always failing. It is hard to find out what is the faulty piece of software!

Maybe you are looking for