Problem with Listener and EM Enterprise

I have installed Oracle 10g DB on my PC (Windows XP) for over 2mths now and everything was working fine, all of sudden my computer crashed and it took a while to solve its problem.
1) the first problem was when i try to log in using SQL Plus it won't allow me access cause it says it can't archive the redo log files although I've got enough disk place on my drive, I was able to log in internally from the cmd prompt and alter the database to noarchivemode.
Intially when i start the LISTENER everything is O.k and check its status everything is running fine but anything I try to access the database thru EM Enterprise to check the AMMD alerts access is denied, I now check the status of the LISTENER its gives an error
Then, I tried to check the status of the listener as below.
D:\oracle\product\10.1.0\Db_2\BIN>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.1.0.2.0 - Pro
:34
Copyright (c) 1991, 2004, Oracle. All rights reserv
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(K
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
How can I compact the problem of logging in thru EM Enterprise and and get my DB out of NoArchivelog Mode cause anytime I try access a table when database is in archivelog mode Oracle crashed?,Help !

Hi.
Is the setup of target for archived redo logs valid and are you able to write to the target. You might look into the log_archive_dest parameter or if by default setup, db_recovery_file_dest. Are you able to write to this particluar disk. And does this file system exist on your disk? You could also check by doing alter system switch logfile and put database into archivelog and see if you are able to switch by putting the database in archivelog and repeat the logswitch.
If the database had been going up and down due to the archivelogproblems, and dbconsole has not been restarted, the dbconsole might have lost status of the database since it's configuration is stored in the sysman schema. I would in any case restart the dbconsole after solving the archivelogissue by typing
d:\oracle\product\10.1.0\Db_2\BIN\emctl stop dbconsole
and
d:\oracle\product\10.1.0\Db_2\BIN\emctl start dbconsole
Further, I would have started the netmanager from %ORACLE_HOME%\bin and verified the setup of listener.ora through the application.
Also I would have checked tnsnames.ora from netmanager and verify that I am able to logonto the database using the netalias provided in tnsnames.ora.
If this is OK, and problem still persist, try putting on tracing on listener level. This might be done through netmanager aswell.
Good luck
Best rgds
Kjell Ove

Similar Messages

Problem with JFrame and busy/wait Cursor

Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2

I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

Problem with XMLTABLE and LEFT OUTER JOIN

Hi all.
I have one problem with XMLTABLE and LEFT OUTER JOIN, in 11g it returns correct result but in 10g it doesn't, it is trated as INNER JOIN.
SELECT * FROM v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
PL/SQL Release 11.2.0.1.0 - Production
"CORE     11.2.0.1.0     Production"
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
--test for 11g
CREATE TABLE XML_TEST(
     ID NUMBER(2,0),
     XML XMLTYPE
INSERT INTO XML_TEST
VALUES
     1,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g1</id>
                         <dat>data1</dat>
                    </fields>
               </data>
          </msg>
INSERT INTO XML_TEST
VALUES
     2,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g2</id>
                         <dat>data2</dat>
                    </fields>
               </data>
          </msg>
INSERT INTO XML_TEST
VALUES
     3,
     XMLTYPE
          <msg>
               <data>
                    <fields>
                         <id>g3</id>
                         <dat>data3</dat>
                    </fields>
                    <fields>
                         <id>g4</id>
                         <dat>data4</dat>
                    </fields>
                    <fields>
                         <dat>data5</dat>
                    </fields>
               </data>
          </msg>
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
ID     DAT     SEQNO     ID_REAL
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4
3     data5          Here's everything fine, now the problem:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
"CORE     10.2.0.1.0     Production"
TNS for HPUX: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
--exactly the same environment as 11g (tables and rows)
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x LEFT OUTER JOIN
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )y ON 1=1
ID     DAT     SEQNO     ID_REAL
1     data1     1     g1
2     data2     1     g2
3     data3     1     g3
3     data4     1     g4As you can see in 10g I don't have the last row, it seems that Oracle 10g doesn't recognize the LEFT OUTER JOIN.
Is this a bug?, Metalink says that sometimes we can have an ORA-0600 but in this case there is no error returned, just incorrect results.
Please help.
Regards.

Hi A_Non.
Thanks a lot, I tried with this:
SELECT
     t.id,
     x.dat,
     y.seqno,
     y.id_real
FROM
     xml_test t,
     XMLTABLE
          '/msg/data/fields'
          passing t.xml
          columns
               dat VARCHAR2(10) path 'dat',
               id XMLTYPE path 'id'
     )x,
     XMLTABLE
          'id'
          passing x.id
          columns
               seqno FOR ORDINALITY,
               id_real VARCHAR2(30) PATH '.'
     )(+) y ;And is giving me the complete output.
Thanks again.
Regards.

Problem with PropertyChangeListener and JTextField

I'm having a problem with PropertyChangeListener and JTextField.
I can not seem to get the propertychange event to fire.
Anyone have any idea why the code below doesn't work?
* NewJFrame.java
* Created on May 15, 2005, 4:21 PM
import java.beans.*;
import javax.swing.*;
* @author wolfgray
public class NewJFrame extends javax.swing.JFrame
implements PropertyChangeListener {
/** Creates new form NewJFrame */
public NewJFrame() {
initComponents();
jTextField1.addPropertyChangeListener( this );
public void propertyChange(PropertyChangeEvent e) {
System.out.println(e);
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {
jTextField1 = new javax.swing.JTextField();
jScrollPane1 = new javax.swing.JScrollPane();
jFormattedTextField1 = new javax.swing.JFormattedTextField();
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
jTextField1.setText("jTextField1");
getContentPane().add(jTextField1, java.awt.BorderLayout.NORTH);
jFormattedTextField1.setText("jFormattedTextField1");
jScrollPane1.setViewportView(jFormattedTextField1);
getContentPane().add(jScrollPane1, java.awt.BorderLayout.CENTER);
pack();
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new NewJFrame().setVisible(true);
// Variables declaration - do not modify
private javax.swing.JFormattedTextField jFormattedTextField1;
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JTextField jTextField1;
// End of variables declaration
}

If you want to listen to changes in the textfield's contents you should use a DocumentListener and not a PropertyChangeListener:
http://java.sun.com/docs/books/tutorial/uiswing/events/documentlistener.html
And please use [co[/i]de] tags when you are posting code (press the code button above the message window).

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the worl

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Problems with activity reports on Enterprise Portal

Hello, we have problems with activity reports on Enterprise Portal. It shows only zeros since certain date.
We have this error in monitoring of Activity Reports - Status of Activity Reporting: "The database contains non-aggregated data that is more than 2 hours old".
And we found this exception in logs: "Exception during a Prepared-statement DB update"
What could be a problem? What should we do?
Thank you.

Configurarion of the Data Collection Service is done well, I think:
Activate portal activity report: true
First day of the week (e.g., Sunday or Monday): Monday
Gather iView statistics:true
Gather page statistics:true
Gather statistics for remote users of local content (global portal): true
Number of days for daily data retention: 90
Number of days for hourly data retention: 30
Number of days for monthly data retention: 730
Number of days for quarterly data retention: 1460
Number of days for weekly data retention: 365
Objects to exclude from reports
Pages for which to gather user data
Save interval (minutes): 60
What should we do then?

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Problems with Safari and Firefox (HTTP?)

Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
Nanne

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with Speaker and Headset in Windows Vista

Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,Edwin

When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

Problem with trigger and entity in JHeadsart, JBO-25019

Hi to all,
I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.27
I have a problem with trigger and entity in JHeadsart
I have 3 entity and 3 views
DsitTelephoneView based on DsitTelephone entity based on DSIT_TELEPHONE database table.
TelUoView based on TelUo entity based on TEL_UO database table.
NewAnnuaireView based on NewAnnuaire entity based on NEW_ANNUAIRE database view.
I am using JHS to create :
A JHS table-form based on DsitTelephoneView
A JHS table based on TelUoView
A JHS table based on NewAnnuaireView
LIB_POSTE is a :
DSIT_TELEPHONE column
TEL_UO column
NEW_ANNUAIRE column
NEW_ANNUAIRE database view is built from DSIT_TELEPHONE database table.
Lib_poste is an updatable attribut in TelUo entity, DsitTelephone entity, NewAnnuaire entity.
Lib_poste is upadated in JHS table based on TelUoView
I added a trigger on my database shema « IAN » to upadate LIB_POSTE in DSIT_TELEPHONE database table :
CREATE OR REPLACES TRIGGER “IAN”.TEL_UO_UPDATE_LIB_POSTE
AFTER INSERT OR UPDATE OFF lib_poste ONE IAN.TEL_UO
FOR EACH ROW
BEGIN
UPDATE DSIT_TELEPHONE T
SET t.lib_poste = :new.lib_poste
WHERE t.id_tel = :new.id_tel;
END;
When I change the lib_poste with the application :
- the lib_poste in DSIT_TELEPHONE database table is correctly updated by trigger.
- but in JHS table-form based on DsitTelephoneView the lib_poste is not updated. If I do a quicksearch it is updated.
- in JHS table based on NewAnnuaireView the lib_poste is not updated. if I do a quicksearch, I have an error:
oracle.jbo.RowAlreadyDeletedException: JBO-25019: The row of entity of the key oracle.jbo. Key [null 25588] is not found in NewAnnuaire.
25588 is the primary key off row in NEW_ANNUAIRE whose lib_poste was updated by the trigger.
It is as if it had lost the bond with the row in the entity.
Could you help me please ?
Regards
Laurent

The following example should help.
SQL> create sequence workorders_seq
2 start with 1
3 increment by 1
4 nocycle
5 nocache;
Sequence created.
SQL> create table workorders(workorder_id number,
2 description varchar2(30),
3   created_date date default sysdate);
Table created.
SQL> CREATE OR REPLACE TRIGGER TIMESTAMP_CREATED
2 BEFORE INSERT ON workorders
3 FOR EACH ROW
4 BEGIN
5 SELECT workorders_seq.nextval
6    INTO :new.workorder_id
7    FROM dual;
8 END;
9 /
Trigger created.
SQL> ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
Session altered.
SQL> insert into workorders(description) values('test1');
1 row created.
SQL> insert into workorders(description) values('test2');
1 row created.
SQL> select * from workorders;
WORKORDER_ID DESCRIPTION                    CREATED_DATE
           1 test1                          30-NOV-2004 15:30:34
           2 test2                          30-NOV-2004 15:30:42
2 rows selected.

Problem with ADS and LDAP

Problem with ADS and LDAP
I have installed Win2000 + sp1 and ADS on a computer. This computer is PDC.
After connection via LDAP I cann't get any object ( users or goups etc. ).
I try connect to ADS by java ( JNDI ).
When I use another clients of LDAP ( eg. Maxware Directory Explorer) I have
the same problem - no objects.
Can anybody help me?
Grzegorz Pszona
my e-mail: [email protected]

Thanks a lot.
Softerra's browser is really good.
Thanks
Rashmi
"Anant Kadiyala" <[email protected]> wrote:
>
I used Softerra's LDAP browser. The browser is free. There is also a
java baded
LDAP browser from Univ of Michigan. I found the Softerra browser to be
more easier
to use.
-anant
"rashmi" <[email protected]> wrote:
Hi,
Can you please let me know which exact ADS tool that you used to examine
the
DN. I have Active Directory Users and Computers, Sites and Servicesand
Domain
and Trusts installed on my machine but I am not able to figure out how
to get
the DN?
Thanks
Rashmi
for Stephen Davies <[email protected]> wrote:
Grzegorz,
I have had WLS6.1 & ADS working ok using LDAP V2. Mind you it did take
a
fair bit of messing around to get it going. MS does have a few oddities,
for example the Administrators DN might look something like this:
cn=Administrator,cn=Users,dc=eglobal,dc=net
One tool that I found invaluable came with the additional support tools
for Windows 2000. The 'Active Directory Administration Tool' made it
easy to list the directory contents and examine the DNs.
Regards,
Steve
Stephen Davies
Principal Consultant
eGlobal Services Pty. Ltd.
Sydney, Australia
Ph. +61 2 9283 1033
http://www.eglobal.net/

Problem with Listener and EM Enterprise

Similar Messages

Maybe you are looking for