Problem with live meeting web access
Java runtime don't work in Live meeting Web access
Any solution for this? We have the same issue.
Got resolved by recreating the webi document from scratch and the live connections.
But this issue really scares me as I have did not see any reason for this to happen and it is very inconsistant.
Anil
Similar Messages
-
Sync Problems with Live Meeting Appointments
I sync my iPhone with Outlook Calendar for all my appointments. I have no problems doing it with regular appointments, but if my appointment uses the Microsoft Live Meeting service, the appointment is ignored by my iPhone.
In other words, it does not show in my iPhone, only in my computer.
Has anyone had a similar problem and does anyone know a solution?See the other postings on syncing problems.
-
Problem with Live Office Web Services
Hi@all,
we have a problem with the Live Office connection options.
The Webservice URL entry has an error: "Verion conflict: Your Live office client needs a newer version of Business Objects Web Services".
I have installed the newest SP (SP3) for XI 3.1 for my Live Office Client and for the BO client tools but it do not work. Has anybody an idea?
Thanks.
ThomasAny solution for this? We have the same issue.
Got resolved by recreating the webi document from scratch and the live connections.
But this issue really scares me as I have did not see any reason for this to happen and it is very inconsistant.
Anil -
Safari 4.0.3 problems with MS Outlook Web Access
I am constantly prompted for my password in MS Outlook Web Access since I upgraded to 4.0.3. This was a minimal problem previously; each time I logged in I would have to enter my password a few times and then be done with it. Now, almost any time I click on ANYTHING I am prompted for my password. Checking the box for 'Remember this password in my keychain' has never had any affect. I'm rather computer illiterate, but I'm willing to try any suggestions! Thanks!
I have a feeling it's a problem with Apple's javascript. I've also posted a thread here showing that it doesn't work properly with javascript if multiple tabs are open.
This wouldn't be a "fix"... but it might be worth a try to close all other tabs and see if it works when only one tab is open & then try it again with multiple tabs open and see if that breaks it.
At least then we'll know we've got a pattern here similar to my issue. I have a feeling the only way this'll get fixed is if Apple gets a head's up and fixes it themselves in Safari. -
Problem with attachment in web service
I'm writing a WebService under WebLogic 9.2 . My WebService API needs to recive and return an attachment. I'm tring to use a javax.activation.DataHandler object for the attachment, but for some reason in the WSDL file that being created, the DataHandler isn't being recognize and the "http://www.bea.com/servers/wls90/wsee/attachment" namespace is being associated with it (I'm using "jwsc" in the build.xml).
Does anyone encounter with problem ? and does the DataHandler is the right object to use for attachment (i want to avoid using base-64 String)?duplicate problem with a secured web service
-
Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.
Hi, I'm having problems with viewing a web page created with Adobe Muse CC latest release, I followed the various guides provided by Adobe, but the problem persists. The problem especially concerns the distorted display (the contents do not fit on the page, so it suits size automatically) to a mobile web page to be displayed not on a normal browser, but in a WebView.
-
Im having problems with my safari Web browser to opening/viewing pdf files.
Im having problems with my safari Web browser to opening/viewing pdf files. I installed the 8.1.2 version But then when I click to open any PDF it says that Adobe PDF Viewer cannot find a compatible Adobe Acrobat or Adobe Reader to view this PDF. Please select one.
i can see the adobe reader but can not select it .did you find a solution to this? my safari history is full of
explicit sites that i have not visited. i see a lot of info on how to remove it, but none on how to figure out how they got there. -
Still the same problem with Live update 2
I still have the same problem with Live update 2.
I've downloaded newer Bios update but it's 13 MB... it's obvious that I can not have
in floppy disk and I'm a little bit uncomfortable of updating bios from CD-rom .
But what else can I do, besides updating Bios to get out of this Live update from start-up.
Should I clear CMOS?13mb are you really sure ?
go here instead.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=436&kind=1
the download file is around 300kb.
make sure you get the right file.
you did not specify if you got L or ILRS.
also dont use live update.
get drivers from http://www.nvidia.com instead. -
Problem with ClassCastException in web application
Hello,
I'm trying to deploy a web application in WLS 5.1 and I'm getting the
"dreaded" ClassCastException every time when JSP tries to read a bean
from the request or session. Under my architecture (actually it's just
the regular "model 2" ) bean is populated by a servlet, set on the
request and then retrieved by JSP (servlet forwards to JSP). Everything
work fine when I register servlets in weblogic.properties, but
ClassCastException is thrown on any attempt to read from the request if
the same JSPs and servlets are deployed as web application.
Has anybody come across the same problem?
Thanks in advance for help.
Alexander
Hello,
This is all well and good as a temporary bug, but it's totally unrealistic for
the future. Two points:
* The ClassLoader doesn't need to be discarded, it just needs to be cleared.
* Other servlet engines seem to be able to handle this.
Hope it's on its way to resolution!
TDoan wrote:
> Alexander:
>
> I had some problem with ClassCastException, and recently I found out what it
> was that causing it. I'm sure if this is the same problem you are having,
> but please read the following paragraph.
>
> I cutted this from http://www.weblogic.com/docs51/classdocs/API_servlet.html
> ClassCastException and HTTP Sessions
>
> You might encounter a ClassCastException while developing servlets that use
> HTTP sessions. This could happen as a result of the following set of events:
>
> a.. You store a reference to a custom class, myFoo, in an HTTP session.
>
> b.. While in mid-session, you change your servlet (or JSP or JHTML),
> causing it to be reloaded. In fact, it is necessary for it to be reloaded by
> a completely new class loader, and the old class loader that had previously
> loaded it must be discarded.
>
> c.. Because your custom class myFoo is also located under the servlet
> classpath, it too is reloaded by the new class loader.
>
> d.. Now, when you retrieve myFoo from the HTTP session, you cast it to the
> expected type, but you recieve a ClassCastException. The exception is thrown
> even if class myFoo has not changed. Because it has been loaded by a
> different class loader, it is regarded by the JVM as incompatible.
> Note: If you are using session persistence, the class contents must be
> serialized, and you will not encounter this exception.
>
> Here are some suggested work-arounds to this problem:
>
> a.. Do not place your class myFoo in the servlet classpath. Instead, place
> it in the system classpath or the weblogic.class.path, which are accessible
> by WebLogic Server. The class will not be reloaded when the servlet is
> modified. This drawback to this solution is that you cannot prototype the
> myFoo class, because you must restart the server in order to reload the
> class after it is modified.
>
> b.. If you need to prototype the class, you can write a wrapper method
> within it to store and retrieve its contents to and from the session. You do
> not access the class directly from the session, but instead call it is
> wrapper methods to store or populate it is contents from the session. As
> long as you use standard Java class types to store the class contents, they
> will not be reloaded when the servlet is reloaded. This approach has
> performance drawbacks because your wrapper methods would need to set or get
> multiple name=value pairs for each class's attributes.
>
> c.. Another work-around is to catch the ClassCastException, and replace
> the old class that is stored in the session with a newly instantiated class,
> or remove it from the session. Unfortunately, you lose the session data that
> was previously stored in the class, so you must write your application to
> handle this scenario. This is the easiest solution to the problem-remember
> that you should not be storing critical information in an HTTP session, but
> rather storing it in a database.
> Note: The ClassCastException generally occurs while you are developing
> your servlets, and should not be an issue in a stable production system. If
> you are upgrading your system online, you might wish to warn your customer
> base.
>
> Hope it helps,
> Tin
>
> "Alexander Ananiev" <[email protected]> wrote in message
> news:[email protected]...
> > Hello,
> >
> > I'm trying to deploy a web application in WLS 5.1 and I'm getting the
> > "dreaded" ClassCastException every time when JSP tries to read a bean
> > from the request or session. Under my architecture (actually it's just
> > the regular "model 2" ) bean is populated by a servlet, set on the
> > request and then retrieved by JSP (servlet forwards to JSP). Everything
> > work fine when I register servlets in weblogic.properties, but
> > ClassCastException is thrown on any attempt to read from the request if
> > the same JSPs and servlets are deployed as web application.
> > Has anybody come across the same problem?
> >
> > Thanks in advance for help.
> > Alexander
> >
-
Problems setting up Remote Web Access in Windows Storage Server 2008 R2
We just bought a WD Sentinel DX4000 Storage Server and went through the Remote Web Access wizard. It setup the router just fine but when we got to the setup your domain name we have been having
headaches ever since. We chose the option to use our own domain name, which we have registered through GoDaddy. It then showed that yes, our provider was GoDaddy but then it told us we needed to update our service with GoDaddy so we clicked the
"Go to GoDaddy.com" button and it sent us to a page to purchase an SSL certificate. So, we did that but then had issues with it not being able to be managed in our GoDaddy account. So, I went into the domain name with GoDaddy and purchased
a certificate there and got it setup on the domain name with GoDaddy.
The problem is that when I try to go through the wizard again to set up the domain name I still have to click the goDaddy button to move to the next page where I type my domain name, username, and password
with GoDaddy. I setup the remote extension in the A records with GoDaddy as remote.mydomain.com, and put in my username and password with GoDaddy. After I click next it tries to connect to the domain name service provider but then gives me the
following error message over and over:
The domain name was not set up for your server. Wait a few minutes and run the wizard again.
An unexpected or unknown problem occurred. Please wait a few minutes, and then try again.
Well, I have tried this several times and am about to start pulling my hair out. Can anyone please tell me what I may be doing wrong?
Thanks for any help you may be able to provide.Hi,
Please verify the installed certificate status, you could refer to the article below to install GoDaddy SLL Certificates.
Installing a GoDaddy Standard SSL Certificate on SBS 2008
http://sbs.seandaniel.com/2009/02/installing-godaddy-standard-ssl.html
Please Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
There is a similar thread, please go through it to help troubleshoot this issue:
SBS Essentials 2011 Domain Name Wizard Fails
https://social.technet.microsoft.com/Forums/en-US/6644ec25-3071-4526-b878-9d6977589f88/sbs-essentials-2011-domain-name-wizard-fails?forum=smallbusinessserver2011essentials
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Problems with live application & FMLE 3
If we try to restrict access by editing the
allowedHTMLdomains.txt and allowedSWFdomains.txt files, FMLE
returns the following error when we click on 'Connect':
Problem with primary server
Failure to connect to primary server. Please verify that your
URL and application name are valid and that your Internet
connection is working and retry.
As soon as we switch allowedHTMLdomains.txt and
allowedSWFdomains.txt back to wildcard (*), everything works fine
and no errors.
FME 2.5 worked just fine, this error occurs with FMLE 3 only.
Any ideas?Hi
Adobe Membership ID is [email protected]
problem with primary server
My name is Robin. I became new member with Adobe and i have download Adobe Flash Live media player 3.2
We wants to video stream from our computer to website livestream.
This URL:rtmp://localhost/live
does not working to run on other computer.What should i do to run live programme through Adobe Flash Media live.please advise us . Please reply.
Thank you
Robin -
Problems with WVC80N and remote access (TZO issue?)
I apologize for this "duplicate entry". I'm a newbie and I think I posted the below in a "Reply" to another Post. I'm learning.
I have a vacation home in the Sierras. I wanted a way to remotely check on the snow in the driveway. I have a Linsys WRT610N router that has been working for a year now. I recently purchased a WCV80N camera and installed it two weeks ago. I have SBC(ATT?)DSL service. PC runs Windows XP. I also subcribed to a plan with TZO for the remote monitoring.
While I was at the location of the camera, everything worked fine. When I left and tried to access the camera, most of the time I got the error message about the connection failing because it had "timed out". I could access the camera at odd hours, late night, weekend, etc.
I called TZO several times to describe the problem and each time they said: "are you at the location of the camera"!! Duh!! The rote answer was that it must be my problem. I'm back at the Sierra home and I've asked a friend to log in remotely. He has the same problem nearly all the time. While I am here at the camera location I can access the camera from the internal IP 192.xxx address. Access via the TZO MyLinksyscam.com log in is sporadic.
I checked the System log and there are multiple entries for: "UPnP: Internal Gateway UPnP discovery failure. Then the following: DDNS: No need to update IP address. And this goes on every 15 minutes, then the UPnP failure message.
Bottom line: Does this sound like "my problem" or TZO's???Sounds like you have the same problems that I had, but the problem is definitely not with TZO, it's your Router. Your Ports might be different than mine but this is what they told me to do:
think you need to open the ports for the cameras.
Follow these steps.
1) open the setup page of the camera IP 192.168.1.99. Click on 'Options' in the side panel. You will find ' Alternate Web Access Port '. If it is disabled then enable it enter the ' Port Number ' - 1024. Save the settings.
2) Open the setup page of the Camera IP 192.168.1.89. Click on 'Options' in the side panel. You will find ' Alternate Web Access Port '. If it is disabled then enable it enter the ' Port Number ' - 1025. Save the settings.
3) Now open the setup page of the router. Go to Applications and gaming. Click on Single port forwarding. If you have any applications there then delete all the applications or uncheck ' Enable'.
Now Go to Port Range triggering sub tab. If you have any application there then delete all the applications or uncheck 'Enable'. Go to DMZ sub tab and if it is enabled then Disable it.
4) Click on Port range Forwarding sub tab. In the application name type ' camera1' . In start and end port type 1024, protocol - both and enter the IP address 192.168.1.99. Check the box enable.
In second application type the name ' camera2'. In the start and end port enter 1025, Protocol - both and enter the IP address 192.168.1.89. Check the box enable. Save the settings.
See if that works. -
BlackBerry Internet Service with Microsoft Outlook Web Access account
I need to switch my 8820 to a new work account. They use Outlook Exchange 2003, but do not support BES. I have access via both regular desktop Outlook and also Outlook Web Access (from a different server). I read the procedure to use BIS in KnowledgeBase KB03133. After entering my email address and password, I get a message that it was successfully set up. But, I get no e-mail messages delivered. When I check the settings, it looks like it is not using the correct server for Web Access. However, I can find no way to manually enter it - I don't get the error message described in Step 5 where I can pick "I will provide the settings." I try to set up via computer but I get a message that my BIS cannot be accessed via HTML and need to set up on my BB.
Any suggestions? Would it work with a newer phone running a newer OS? Do I need to check with AT&T if it supports Outlook Web Access? Thanks in advance.Hi and Welcome to the Forums!
Lot's of possible variables...here a several other KBs to try:
KB03133How to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
KB18567BlackBerry Internet Service cannot connect to a Microsoft Outlook Web Access account using Microsoft Exchange 2007 or Microsoft Exchange 2010
KB15173Locate the mailbox name for a Microsoft Outlook Web Access 2007 email account
KB04804Error message appears when attempting to integrate a Microsoft Outlook Web Access 2010 account
KB02858Unable to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
The trick to getting to the manual settings screen is to provide your valid email address, but an incorrect password...then, it will allow you to manually enter the settings.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Problem with breakpoints in Web Dynpro components
Hello experts,
I have problems with breakpoints in methods of Web Dynpro components. Sometimes everything works as expected and a new window with the debugger comes up. Sometimes the breakpoints are ignored, and debugging is impossible. It even happens that a colleague can debug and I can't or vice versa.
I am setting breakpoints with button "Set/Delete External Breakpoint", and the message always is "Breakpoint is set for user xxx". But sometimes when I display a method there is a warning that external debugging is not active. What does that mean and what is the reason for that?
As adviced in the SAP help document "Debugging Web Dynpro ABAP Applications" I have enabled the new Front-End Editor and the new debugger, but still the problem exists. Does anybody experience similar problems or have an explanation for this?
A second question concerns the different types of break points. My Web Dynpro component has an assistance class, and if I want to set a breakpoint there, I can choose between a session breakpoint and an external breakpoint. What exactly is the difference between these types? And here in the forum I sometimes read about internal breakpoints. Is this even a third type, or the same as session breakpoints?
Thanks, KarstenHi Kartsen.
External Breakpoint -> can be started from outside the SAP GUI (e.g. WebDynpro)
Session breakpoints are used if you start a programm or something like that in SAP GUI.
I have the same problem ... sometimes he does not recocnize a new break point ... so I just reload the page and the break point works.
If external debugging is not active, you habve to activate it in SE80 Utilities->External Breakpoints.
Also make sure that in your Settings the correct debugging user is set:
Utilities->Abap_Editor->Debugging.
Cheers,
Sascha -
Problem with layout in Web Application Designer
Hi all,
I am working with the BEx Web Application Designer. Well, I execute a web template in the browser, click on right button and choose enhanced menu, query properties and mark the check box Display Rows as Hierarchy and Expand to and from the list of values (combo-box) choose the last field that can be expanded.
Once all the lines have been expanded and the layout of the template is longer than a page, we look for a line that is not in the first page and contract it. The problem is that when we contract the line, the layout shows the first page, instead of the page where the line had been contracted. I have tried to solve this changing the properties that appear when the template is designed, but I haven´t found the solution. Is there any way so that i can solve it?
Thanks in advance,
Mª del Mar Bonilla.Bonilla,
Welcome to SDN...
Try this out...
In the Query designer view , right click on the rows structure and select display as hierarchy. In case this option works fine , the behavior pointed out by you could be a possible bug.
Just update the result of what I have mentioned above...
Hope it helps..
Arun
P.S Assigning points is a way fo saying thank you in SDN
Maybe you are looking for
-
Interface to run at a specific time
Hi I am trying to let a interface run at a specific time, I have setup the bpm and will probable use the wait step? Is this the way to go, because I was thinking of setting my sender adapter to run let's say every 2 hours and then when it reach 10pm
-
When I go to type in Pages, nothing shows. I am able to open up and click on word processing template etc. I have a fairly old IMac and just updated my operating to OSX 10.6.8. I'm wondering if the upgrade affected Pages - have Pages 08 version 3.
-
ABAP/4 processor: CALL_FUNCTION_OPEN_ERROR
Has anyone any idea why this <b>Abend message</b> <b>ABAP/4 processor: CALL_FUNCTION_OPEN_ERROR</b> is displayed. I have a programs wich fails at a RFC call and the message (type -A) displayed is ABAP/4 processor: CALL_FUNCTION_OPEN_ERROR. Thanks.
-
Yoga 12: Autorotation not working with windows 10
Hello I updated my Win 8.1 pro to 10 pro .. but now i have some problem 1st display does not autorotate2nd the lock rotation button does not show any reaction3. in the display settings the rotation button is greyed out any tips ?
-
I just purchased an Ipad 2 and I was wondering if there was an app that would allow me to create MS office docs (Word, Excel) using my Ipad. I know that there is software for the Apple Mac. Does anyone know if one exists for the Ipad? Thanks!