Problem with loading contacts into my car's phone book since upgrading to IOS 6

SInce upgrading my 4S to IOS 6 the only contacts that will upload to my 2011 car are those contacts listed under Favorites. I'm presuming its an issue with ios6. Has anyone experienced the same problem and can offer a fix?

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

Has anyone noticed problems with loading contacts into car phone books after updating to ios6?

My iPhone 4S will now load onlycontacts listed in my Favorites. Previously it loaded everyone in my contacts list. Since I haven't changed vehicles nor phone, I can only assume its a software issue. Unfortunately since I chose replace when giving my car directions I lost all the contacts previously loaded.

hi,
i updated my Nokia N8-00 last night with Nokia Suite and symbian Belle was successfully installed in it. .
It worked for few hours and i installed few applications from Nokia Store and was everything fine. .
But suddenly in the morning my phone switched off and never started again. . I treid to start but only Nokia was appearing on the screen and it was unable to boot further. . right now i gave the phone in Nokia Care, they told it takes around 10-12 days to get the phone back from Company. .
Kindly guide me for the problem as i am completely helpless without my Phone working. .
Regards,
Dhaval Aghera
djaghera

Iphone 6 will not down load contacts into my car phone system, have tried blue tooth and usb hard wire. No success. has anyone any ideas?

I have just purchased an iPhone 6 and donwloaded IOS 8.1. I cannot get the phone to download the phone contacts into my Mercedes benz incur phone system. Have rest the network. Tried several time but still no joy. My previous Iphone 4s worked fine. Just a bit frustrated. Anyone assist?

I have the same problem on my Lincoln. My Iphone5 worked just fine until I loaded 8.1.

My iPad mini will no longer log into iTunes or any AppleID app since upgrading to iOS 8.1. Any suggestions?

My son upgraded his iPad mini a couple of weeks ago to iOS 8.1. The internet and everything else still works but he has not been able to log into iTunes for anything since. When we log in it says "cannot connect to iTunes store". We have confirmed the password and it still works of our other devices. We have confirmed his devices is still enabled under the Apple ID. Suggestions?

I wish that had worked. I logged off from the setting on the mini and on my main computer. I got the same message that it cannot log into the store. I was able to log back in on my computer though.

Problem with loading data to Essbase

Hi All,
I have a problem with loading data into Essbase. I've prepared maxl script to load the data, calling rule file. The source table is located in RDBMS Oracle. The script works correctly, ie. generally loads data into Essbase.
But the problem lies in the fact, that after deletion of data from Essbase, when I'm trying to load it again from the source table I get the message: WARNING - 1003035 - No data values modified by load of this data file - although there is no data in Essbase... I've also tried to change the mode of loading data from 'overwrite' to 'add to existing values' (in rule file) but it does'nt help ... Any ideas what can I do?

Below few lines from EPM_ORACLE_INSTANCE/diagnostics/logs/essbase/dataload_ODL.err:
[2013-09-24T12:01:40.480-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received Validate Login Session request
[2013-09-24T12:01:40.482-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received client request: Get App and Database Status (from user [admin@Native Directory])
[2013-09-24T12:01:54.488-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: MaxL: Execute (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Received client request: MaxL: Describe (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [MLEXEC-2] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Output columns described
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Define (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [MLEXEC-3] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Record(s) fetched
[2013-09-24T12:01:54.496-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.498-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received Validate Login Session request
[2013-09-24T12:01:54.499-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: Get Application State (from user [admin@Native Directory])

Memory leak problems with loading videos over and over.

I'm having memory leak problems with loading videos into a VideoPlayer aswell as FLVPlayback.
What the flash should do:
- Should be running for 7 days without having to restart the projector.
- Interface that shows people around a 360 3D model with 5 different parts and at the stops it makes during the rotation you can click to zoom in on a location which plays a movie for that aswell.
- Shows a video out of 5 parts for a 360 rotation in 3D in mp4 video (added each time and cleaned up, see code below).
- Still images are used when the video clips are done playing (MovieClip in stage).
- Should run automatically when there is no user interaction for X minutes.
What the problem is:
- The flash (as a exe and swf i guess) starts to consume memory over time (say 10 hours) until the projector crashes. This usually at around 1.75 GB of memory.
I cannot see why the Flash cannot garbage collect this and free up the memory. Mabye there is something I don't understand about the garbage collection in flash?
Here is some code from the video loading and playing:
var fVideo:VideoPlayer;
VideoCreate();
function VideoReady(pEvent:VideoEvent):void
trace("VideoReady()");
     // start playing video
fVideo.play();
function VideoLoad(pUrl:String):void
     trace("VideoLoad(" + pUrl +
     VideoCreate();
     if (pUrl != "")
          if (fVideoFolder + pUrl == fVideo.source)
               fVideo.seek(0);
VideoReady(null);
          } else {
trace(fVideo.state);
               if (fVideo.state !=
VideoState.DISCONNECTED) fVideo.stop();
fVideo.close();
fVideo.load(fVideoFolder + pUrl);
     } else {
// error no url
function VideoCreate():void
     trace("VideoCreate()");
     // remove old one
     if (getChildAt(0) == fVideo)
          removeChildAt(0);
     fVideo = new
VideoPlayer(1024, 768);
     addChildAt(fVideo, 0);
     fVideo.autoRewind = false;
fVideo.addEventListener(VideoEvent.COMPLETE, VideoDonePlaying);
fVideo.addEventListener(VideoEvent.READY, VideoReady);

Hmm. It's in connection with Dropbox. Så apparantly you can only use one of the two at the same time if you want the programs integrated in Finder.

Beginner Has Problem With Loading JDBC Driver Using MySQL

Hi, I am having problem with loading JDBC driver, and need your diagnotic help.
1. I have installed MySQL (C:\mysql), created a databse (soup), and created a littel table (VIDEOS). I am able to see the table in the console:
sql> select * from videos
2. I have downloaded the latest version of Connector/J (mysql-connector-java-3.1.0-alpha.zip), and unzip the zip file into my C:\ directory.
3. I copied the mysql-connector-java-3.1.0-alpha-bin.jar to the C:\j2sdk1.4.1_02\jre\lib\ext folder and it is in my CLASSPATH
4. MySQL server is running
C:\> C:\mysql\bin\mysqld-nt --standalone
5. open another DOS window and use the database
mysql>USE SOUP
6. succesfully compiled a Java program (javac Test.java):
import java.sql.* ;
public class Test
public static void main( String[] args )
try
Class.forName("org.gjt.mm.mysql.Driver").newInstance();
try
Connection con = DriverManager.getConnection( "jdbc:mysql://localhost:3306/soup" );
try
Statement statement = con.createStatement();
ResultSet rs = statement.executeQuery("SELECT TITLE FROM VIDEOS");
while ( rs.next() )
System.out.println( rs.getString( "TITLE" ) );
rs.close();
statement.close();
catch ( SQLException e )
System.out.println( "JDBC error: " + e );
finally
con.close();
catch( SQLException e )
System.out.println( "could not get JDBC connection: " + e );
catch( Exception e )
System.out.println( "could not load JDBC driver: " + e );
7. when I run the Java program (java Test), I got
the message:
could not load JDBC driver: java.lang.ClassNotFoundException: org.gjt.mm.mysql.Driver
What am I missing?

Hi,
I missed to specify test in my last post.
Try running your program by explicitly setting the classspath when
running your program . java -classpath c:\mysql-connector-java-3.1.0-alpha-bin.jar test
Make sure your jar file contains org.gjt.mm.mysql.Driver class

Problem with loading file with SQL loader

i am getting a problem with loading a file with SQL loader. The loading is getting
terminated after around 2000 rows whereas there are around 2700000 rows in the file.
The file is like
919879086475,11/17/2004,11/20/2004
919879698625,11/17/2004,11/17/2004
919879698628,11/17/2004,11/17/2004
the control file, i am using is like:-
load data
infile 'c:\ran\temp\pps_fc.txt'
into table bm_05oct06
fields terminated by ","
(mobile_no, fcal, frdate )
I hope, my question is clear. Please help, in solving the doubt.
regards.

So which thread is telling the truth?
Doubt with SQL loader file wih spaces
Are the fields delimited with spaces or with commas?
Perhaps they are a mixture of delimiters and that is where the error is coming in?

Problems with importing images into Lightroom cc

Problems with importing images into Lightroom cc
I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
Now I have left lightroom 5 and where the input port works fine.
What happened to the upgrade from Lightroom 5 to lightroom cc?
The camera has the latest software.

I've now tested in various ways.
First, I have images on both memory cards in the camera.
Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
I turn the camera off after a while and get the next meddelnade (picture 1)
Which can be translated:
"The following files were not imported because they could not read (351)
Property 1-100
etc. "
Picture 1.
Picture 2

Problems with loading native library/missing methods:no ttJdbcCS in java.li

Iam facing one problem while connecting the timesten client to the server The SQL Exception which Iam getting is pasted below:-
Problems with loading native library/missing methods: no ttJdbcCS in java.library.path
I am working with MAC OS X 10.7.2 and my timesten client version is 11.2.1.0
I have also changed the Java Preferences from 64-bit to 32-bit but still whenever i tried to connect with the SQL Developer it gives me the above error.

I just tried this out. My environment is OS X 10.7.4, Timesten (32-bit) client 11.2.1.9.0, SQL Developer 3.1.07, Oracle Java 1.7.0_04.
The key things you need to be sure to do (in a terminal window) are:
1. Be sure to . in the TimesTen environment script <tt_install_dir>/bin/ttenv.sh to set the full TT environment.
2. Change directory to SQLDeveloper.app/Contents/Resources/sqldeveloper
3. Run 'sh sqldeveloper.sh -J-d32'
and all should be fine.
Note that if you are using Java7 as I am then there is a step 1a. Change the CLASSPATH environment variable to specify ttjdbc6.jar not ttjdbc5.jar. For some reason running the app directly from Finder does not work even if you add -J-d32 into the sqldeveloper launch script. I'm still looking into that.
Chris

My Client is having a serious problem with the Contact Form Widget

My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
When I look at 'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed? If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field. My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
Can anyone help me figure this out? I really don't want to disappoint my first client.

Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form. You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan. This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents". Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues. On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get. You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

Problem With Loading the jars

Hello Experts,
I am facing a problem with loading classes.
i have written one application which is running on server.in that application want to use certain jars(Classes)and those jars anmes and
classes inside the jars are same.based on the condition i want to call
corresponding class.
can any one suggest the solution
it's urgent
any help will be appriciated
thanks in advance
With regds
Bankuru

Hi Yogee,
Thanks for ur help.
i have 4.o jars and 5.1 version jars.depending on the condingtion system must use the corrensponding jar.the problem here is that both jars has same clasees and code inside that one is differnet.
when i run application with 4.o condition then 5.1 is not working and
if i run tha application with 5.1 then 4.o is not working.
can u please suggest the possible solution
i have deployed these jars in application server
With Regds
Bankuru

HT204150 I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

I'm having problems with random contacts disappearing from icloud. I have a saved text from a contact that displays her info but when I look for her in contacts it's missing.

It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

I have a problem with loading the PNG image

I have a problem with loading the PNG image from site. For ex. go to icefilms com and is starts to load png like crazy CPU is huge and you can not shut down Firefox at least a minute. This is not just in this site but whit any one whit lots of pictures.
Image from firefox: Picture [http://img836.imageshack.us/img836/9910/7312011103147pm.jpg 1] [http://img28.imageshack.us/img28/8505/7312011103249pm.jpg 2] [http://img706.imageshack.us/img706/5615/7312011103348pm.jpg 3 ][http://img827.imageshack.us/img827/8483/7312011103533pm.jpg 4]
This is my Task Manager [http://img217.imageshack.us/img217/5715/7312011103621pm.jpg 1]
- I try safe mode, same thing
-All addons and plugins are ok
Any idea why is this so big problem.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

I have problem with my contacts. I can't send message if the contact didn't send me a message before. How can I add new address?

i have problem with my contacts. I can't send message if the contact didn't send me a message before. How can I add new address?

Hi tizac,
You will want to add them to your Contacts.
There's a "+" button at the bottom of the contact list on the left to add a contact.
If you need to add the email address or phone number to an existing contact, there's an Edit button at the bottom of the contact info (on the right).
Once you have the contact email address or phone number you want to message to, scroll all the way down to the bottom of their information and there are options to:
Send Message               FaceTime
Share Contact             Add to Favorites
Of course choose "Send Message" to send an iMessage to them and you will start a new chat. You will be given the options of how to contact them, via phone number (if they are on an iPhone) or email (if they are on an iPod touch or iPad).   They do need to be signed up for iMessage or it won't allow you to send.
ivan

Problem with loading contacts into my car's phone book since upgrading to IOS 6

Similar Messages

Maybe you are looking for