Problem with loading Danish dictionaries files.

Hi,
I want use Danish spell check for my project and when my app start load
spell check files I get exception. Files are here http://www.stavekontrolden.dk/main/top/index.php.
Please tell me is thare any way to use Danish spell check in flex application?
And alos I can't find Finnish spell check that I could use with flex.
Is flex support Finnish spell check ?? If no will flex support it?
Error decription:
Main Thread (Suspended: Error: null cannot be parsed to a squiggly dictionary)
Thanks,
Vladimir

As Ned said the problem might be with the file structure on the server. Other problems may be with spelling. You computer may not be case sensitive to the names of the .swf files that you are loading, but your server might. So, on your computer when you are testing, second.swf is the same as Second.swf, or even second.SWF. But, on the server each of these variations is seen as a different file. Another problem is that when you are loading files from the same computer in testing, those files are close and so they load very quickly from your computer. When the files have to travel from the server, there will likely be a measurable period of time before the file is ready to be shown. This is particularly problematic with video that is embedded into an .swf. The whole file will need to be downloaded and uncompressed before it is available to play. If you stream the video as an external file, you can shorten the wait considerably.

Similar Messages

Problem with loading a Sequence File - Limited Windows Account

Dear Sirs,
I have a problem and a very less time to fix it; so I'm asking for your kind help.
I have a production PC, with a Debug Deploy License of TS 3.1 and LV 7.1; the operating system is Win XP SP2.
No problem when I login the session with my Administrator Windows Account; on the contrary, when I try to login with a Limited Windows Account, I'm not able to load my Sequence File, and the text appearing is attached to this message.
Someone can advise me a solution to quickly solve my problem?
Thank you very much and Best Regards.
Stefano
Attachments:
TS_error_winXP_login_limited_account.jpg ‏224 KB

Stefano,
if you open files in TestStand, TestStand tracks this in different configuration files (for example for the "most recently used" list). Therefore, TestStand tries to save these changes in the ini-files. It seems to me, that the installationdirectory of TestStand is not permitted to be used for writing for your user login in Windows.
So you have different solutions here, the simpliest being:
Give your user the right to write files into the < TestStand >\-folder.
hope this helps,
Norbert B.Message Edited by Norbert B on 11-16-2006 07:28 AM
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Problems with load DSO from file

I am working with BI 7.0.
I am loading data from file to DSO and my problem is that data is not active in my DSO, the data are loaded how New Data and I haven´t the data in query and DSO.
The settings of my dso are:
Type: standard
SIDs Generation upon Activation: X
Set Quality Status to 'OK' Automatically: X
Activate Data Automatically: X
I have created one transformation from datasource to DSO and one DTP that extract from datasource ( No PSA).
When I execute the DTP there aren´t errors, the status is green and ok but the data is not active.
If I try activate the data manually the job is launched but the data no active.
Thanks.

hai
Isabel Bautista
u r saying the data is not active in dso and also u r loading the data from file directly( no psa).
i think u know in B.I the data should be in psa then only u can load the data using DTP .so how can u load the data with out data in psa .i thinks may be because of this u r data is not activating in dso
if it helps
assign some points ok

Problem with loading data from file in ../demo/file/test

hi there,
I am using ODI to load text files located on a UNIX server where ODI is installed.
I am using the FILE_GENERIC data server and physical schema that came with ODI and I can reverse and load the demo files located in ../demo/file
I created a sub-directory 'test' under ../demo/file and placed a file there.
When I try to reverse this file (in directory ../demo/file/test) I get the error 'The directory ../demo/file/test specified in your schema does not exist'
I am sure the userid has equal rights to both directories ../demo/file and ../demo/file/test
What could I be missing?

In the topology manager
1. in the logical architecture : If it doesn't already exists (it should exist if your can use it on your local PC), you import the file technology
2. In the physical architecture, you create your data server for files .In your case, it shoud already exist for same reason as above. Is has a blue icon under the file technology
2. Select the Data Server, right click and select Insert Physical Schema . The Physical Schema window appears. On Definition tab, enter a name and then the path of your directory in the data schema field. No need to enyter a work schema for files.
4. Go to the Context tab, Select a Context and an existing Logical Schema for this new Physical Schema.
Select an existing Context in the left column, the type the name of a Logical Schema in the right column. This Logical Schema is automatically created and associated to this physical schema in this context.
It should work but i have never experienced it on a Linux system...

Problem with loading a sound file

Hello, I am trying to play a sound file (located in same dir as the class files) from a swing app using this line.
AudioClip clip = Applet.newAudioClip(new URL("sound.au"));When I run the program, I always get a MalformedURL Exception.
Could someone please tell me the correct way to load a sound file in swing.
Thanks

"sound.au" is no valid URL, hence the exception.
How about "file:///c/myfiles/sound.au" or something?

Memory problem with loading a csv file and displaying 2 xy graphs

Hi there, i'm having some memory issues with this little program.
What i'm trying to do is reading a .csv file of 215 mb (6 million lines more or less), extracting the x-y values as 1d array and displaying them in 2 xy graphs (vi attacked).
I've noticed that this process eats from 1.6 to 2 gb of ram and the 2 x-y graphs, as soon as they are loaded (2 minutes more or less) are really realy slow to move with the scrollbar.
My question is: Is there a way for use less memory resources and make the graphs move smoother ?
Thanks in advance,
Ierman Gert
Attachments:
read from file test.vi ‏106 KB

Hi lerman,
how many datapoints do you need to handle? How many do you display on the graphs?
Some notes:
- Each graph has its own data buffer. So all data wired to the graph will be buffered again in memory. When wiring a (big) 1d array to the graph a copy will be made in memory. And you mentioned 2 graphs...
- load the array in parts: read a number of lines, parse them to arrays as before (maybe using "spreadsheet string to array"?), finally append the parts to build the big array (may lead to memory problems too).
- avoid datacopies when handling big arrays. You can show buffer creation using menu->tools->advanced->show buffer allocation
- use SGL instead of DBL when possible...
Message Edited by GerdW on 05-12-2009 10:02 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Problem with loading big image files in 1.4

Hi, I recently discovered that after updating my jdk from 1.3 to 1.4, my application seems to be failing to display image files over 300kbytes, or at least the display is corrupted.
Originally I have a gif file over 300k (2048X512 pixels) and the display got corrupted, but when i reduced the file (1024X512) the display did not corrupt.
Is there any way other than to cut the filesize of the image??
~Jeffrey

I know that focus management has changed alot.
Based on my experimentation a while back, in 1.4 it still believes that the JFrame is the window in focus, even though a JOptionPane is currently in front of it (unless I misinterpreted what was going on). Thus, the frame seems to get the keyboard event and re-invoke the action.
A.F.

Problem with loading file with SQL loader

i am getting a problem with loading a file with SQL loader. The loading is getting
terminated after around 2000 rows whereas there are around 2700000 rows in the file.
The file is like
919879086475,11/17/2004,11/20/2004
919879698625,11/17/2004,11/17/2004
919879698628,11/17/2004,11/17/2004
the control file, i am using is like:-
load data
infile 'c:\ran\temp\pps_fc.txt'
into table bm_05oct06
fields terminated by ","
(mobile_no, fcal, frdate )
I hope, my question is clear. Please help, in solving the doubt.
regards.

So which thread is telling the truth?
Doubt with SQL loader file wih spaces
Are the fields delimited with spaces or with commas?
Perhaps they are a mixture of delimiters and that is where the error is coming in?

D800 file compatibility: Has anyone experienced problems with loading D800 files onto the iPad using the camer connector kit? I have tried both RAW and JPEG using SDHC and CF cards and the iPad(3) doesnt recognise any of the files.

Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit? I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files.
I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
Any advice appreciated?
PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.

If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
If some files do not import as expected using one mode, try switching to the other mode and importing again.
Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge.

Problem with Append mode in File Receiver

Hello,
I am facing some problem with Append Mode in File Receiver.
In channel config, i have given :
Construction Mode : Append
File Type : Text
Message Protocol : File Content Conversion
The size of the file which i am trying to send is about 9.5MB.
I got this error,
"Recovering from loss of connection to database; message
loaded into queue by recover job: System Job (Failover Recovery)".
So, it would seem that there was a loss of connnection to the database
while the file was being written.
Note - XI successfully recovered from the connection loss and
successfully wrote the file, however since the communication channel
was set to append, it appended to the partial file that was written
before the database connection loss. This is not correct. The file
should have been overwritten after the recovery even though the communication
channel was configured to append.
Can anyone help me on this regard.
Thanks,
Soorya.

Hi Venkat,
I would suggest u to split the file in to chunks if u face any problem in processing at a time in append mode and also
Memory Requirements are must 4 processing huge files:
Q: Which memory requirements does the File Adapter have? Is there a restriction on the maximum file size it can process?
A: The maximum file size that can be processed by the File Adapter depends on a number of factors:
o The most important one is the size of the Java heap, which is shared among all messages processed at a certain point in time. In order to be able to process larger messages without an out of memory error (OOM), it is recommended to increase the size of the available Java heap and/or to reduce the concurrency in the system so that fewer messages are processed in parallel.
o Another factor negatively influencing the maximum message size in releases up to and including XI 3.0 SP 13 is an enabled charcter set (encoding) conversion if the message type is set to "Text".
o Using the transport protocol "File Transfer Protocol (FTP)" also uses more memory for processing than the transport protocol "File System (NFS)" (up to and including XI 3.0 SP 13).
o If the Message Protocol "File Content Conversion" is used in a File Sender channel, consider that not only the size of the input file affects the File Adapter's memory usage, but even more the size of the XML resulting from the conversion, which is usually a few factors larger than the original plain text file.
To reduce the memory consumption in this scenario, consider configuring the setting "Maximum Recordsets per Message" for the sender channel. This will cause the input file to be split into multiple smaller mesages.
Plz do refer the following links:
U may plan the availability of ur communication channel using "Planning Availability Times" feature
http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
/people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
hi check the below links for reference
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10748ef7-b2f0-2910-7cb8-c81e7f284af5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7086f109-aaa7-2a10-0cb5-f69bd2affd2b
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cc1ec146-0a01-0010-90a9-b1df1d2f346f
Regards,
Vinod.

Beginner Has Problem With Loading JDBC Driver Using MySQL

Hi, I am having problem with loading JDBC driver, and need your diagnotic help.
1. I have installed MySQL (C:\mysql), created a databse (soup), and created a littel table (VIDEOS). I am able to see the table in the console:
sql> select * from videos
2. I have downloaded the latest version of Connector/J (mysql-connector-java-3.1.0-alpha.zip), and unzip the zip file into my C:\ directory.
3. I copied the mysql-connector-java-3.1.0-alpha-bin.jar to the C:\j2sdk1.4.1_02\jre\lib\ext folder and it is in my CLASSPATH
4. MySQL server is running
C:\> C:\mysql\bin\mysqld-nt --standalone
5. open another DOS window and use the database
mysql>USE SOUP
6. succesfully compiled a Java program (javac Test.java):
import java.sql.* ;
public class Test
public static void main( String[] args )
try
Class.forName("org.gjt.mm.mysql.Driver").newInstance();
try
Connection con = DriverManager.getConnection( "jdbc:mysql://localhost:3306/soup" );
try
Statement statement = con.createStatement();
ResultSet rs = statement.executeQuery("SELECT TITLE FROM VIDEOS");
while ( rs.next() )
System.out.println( rs.getString( "TITLE" ) );
rs.close();
statement.close();
catch ( SQLException e )
System.out.println( "JDBC error: " + e );
finally
con.close();
catch( SQLException e )
System.out.println( "could not get JDBC connection: " + e );
catch( Exception e )
System.out.println( "could not load JDBC driver: " + e );
7. when I run the Java program (java Test), I got
the message:
could not load JDBC driver: java.lang.ClassNotFoundException: org.gjt.mm.mysql.Driver
What am I missing?

Hi,
I missed to specify test in my last post.
Try running your program by explicitly setting the classspath when
running your program . java -classpath c:\mysql-connector-java-3.1.0-alpha-bin.jar test
Make sure your jar file contains org.gjt.mm.mysql.Driver class

Problem with loading data to Essbase

Hi All,
I have a problem with loading data into Essbase. I've prepared maxl script to load the data, calling rule file. The source table is located in RDBMS Oracle. The script works correctly, ie. generally loads data into Essbase.
But the problem lies in the fact, that after deletion of data from Essbase, when I'm trying to load it again from the source table I get the message: WARNING - 1003035 - No data values modified by load of this data file - although there is no data in Essbase... I've also tried to change the mode of loading data from 'overwrite' to 'add to existing values' (in rule file) but it does'nt help ... Any ideas what can I do?

Below few lines from EPM_ORACLE_INSTANCE/diagnostics/logs/essbase/dataload_ODL.err:
[2013-09-24T12:01:40.480-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received Validate Login Session request
[2013-09-24T12:01:40.482-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received client request: Get App and Database Status (from user [admin@Native Directory])
[2013-09-24T12:01:54.488-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: MaxL: Execute (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Received client request: MaxL: Describe (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [MLEXEC-2] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Output columns described
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Define (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [MLEXEC-3] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Record(s) fetched
[2013-09-24T12:01:54.496-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.498-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received Validate Login Session request
[2013-09-24T12:01:54.499-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: Get Application State (from user [admin@Native Directory])

Please help us, we have a problem with loading a page is slow we have to wait a longer time to open our one page, thanks in advance

Please help us, we have a problem with loading a page is slow we have to wait a longer time to open our one page, thanks in advance

You can try these steps in case of issues with web pages:
You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Problem with Preview and PSD files - random gray square

Hi guys, hope you can help...
I've got a problem with Preview and PSD files.
If I open in Preview both an original jpg straight from my reflex and the photoshop version of the same picture, the psd file presents a gray square (of what it seems unrendered image) in a random area of the photo (sometimes in the center.). The square is quite big...
If I zoom in or zoom out it disappears...if I scroll to another photo and then back to the psd, the square it's there again...sometimes in a different position.
I've tried the same psd on my older iMac with leopard...and got no problem at all.
I suspect it got something to do with my Ati...
(this is the second iMac 27...the first went back for gray banding on the lcd screen and flickering and yellow tinge........)
Thanks for your help.
DAve.

maybe I'm onto something...
I've just found out that opening Preview in 32bit mode (instead of default 64bit) works flawlessly with any psd files. If I switch back to 64bit mode, Preview is much faster but the gray square comes back...
It seems like the i7 is much faster than the Ati....
Any more realistic ideas?

I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

I have problems with seeing my bookmarks, file, view, edit...buttons. I tried other shortcuts. I noticed that all of my bookmarks are located in the Internet Explorer browsers, how can I restore setting back to Mozilla Firefox?

Is the menu bar missing (the one containing File, View, Edit etc)? If it is, the following link shows how to restore it - https://support.mozilla.com/kb/Menu+bar+is+missing

Problem with loading Danish dictionaries files.

Similar Messages

Maybe you are looking for