Problem with Local DCs View in NWDS

Hi!
I' ve got a problem with Local DCs view in NWDS: None of the standard-DCs (BI_MMR, BI_UDI, CAF a.s.o.) can be expanded and show their content. I already reinstalled IDE, but without success.
Has anybody got an idea?
Thanks a lot in advance!
Regards,
Thomas

Your setup might be incomplete: The SAR file extraction creates very long paths on your filesystem. If you do not extract to the rootfolder of disk, chances are the paths become too long and the installation exits, without any warning.
If this is not the cause of your problem, check if the .dcdef files for the local DCs (plugin com.sap.tc.ap if I'm correct) were copied during installation.

Similar Messages

Problem with Local DCs View in NWDS 7.0

Hi!
I' ve got a problem with Local DCs view in NWDS: None of the standard-DCs (BI_MMR, BI_UDI, CAF a.s.o.) can be expanded and show their content. I already reinstalled IDE, but without success.
Has anybody got an idea?
Thanks a lot in advance!
Regards,
Thomas

Hi,
This is due to some files missed in Local development.
Let me know Are you able to see .confdef, .syncdb and buildvariant.config files under Local Developement.
If you are not able to see, UnInstall your NWDS, Remove Local developement under .dtc folder, then Re-Install NWDS.
Hope this will help you.
Thanks & Regards
Vasundhara

SAP SCs cannot be expanded on Local DCs view on NWDS

Hello,
I've created a new track and downloaded the configuration into NWDS.
The problem is that if I go to the Local DCs view and expand the DCs in the track I can see sap.com_EP_BUILDT_1, sap.com_SAP_BUILDT_1, sap.com_SAP_J2EE_1 etc but I cannot expend them and get the projects inside which causes local compilation to fail.
I have declared those SCs as dependencies, imported them on the CMS to development, updated the track, re-imported the configuration on NWDS but I still can't expand them.
Any ideas...?
Roy

Please ignore, problem does not exist.

Problem with local editing after update to SP13

Hallo,
we have updated our Enterprise Portla 7.00 to SP13. Now many user have Problem with local editing. The error message is "The download of the document fail".
I know that every PC needs the "Docservice" Active X component installed. The "Docservice" is also installed.
At my PC theres only this problem with "html" documents.
What could be the problem. ?
Please help.
Many thanks
Ronald

We found that there is a problem with the Docservice Active X Component.
If we work in a deeper folder there is a problem with the length of the url. I changed the TEMP Setting
"Setting a different TEMP directory:
In cases that it is problematic to use the standard %TEMP% directory,
setting the environment variable SAPKM_USER_TEMP pinpointing to a
corresponding directory path (e.g.
X:\SHARES\USERS\xxx\CheckedOutDocuments) will be also supported. If the
access to that directory fails the standard %TEMP% directory will be
used as fallback."
I used "C:\TEMP" and now it works....... but this cant be the solution....
thans Ronald

Problem with Local Intranet in IE 11

Hi
We are experiencing a strange problem with Local Intranet in IE 11. We have a public company site which has been put into the Local Intranet site. The site contains content from 3 internal sites, which of course are part of Local Intranet per default.
Sometimes when I refresh the public company site I receive a security warning because IE says it's between zones.
Why? :-)
Might this be an issue because the 3 internal sites aren't hardcoded into Local Intranet through policy?
Lasse
/Lasse

Hi Lasse,
I would like to know if this issue happened in all user's IE browser.
Meanwhile,please post the screenshot here
so that we can help you analyze the issue.
Regards,
Kelvin Xu
TechNet Community Support

Problem with pdf chrome viewer and javascript

I have a problem with chrome pdf viewer. We have created a form with acrobat 9 pro, this form contains a javascript. When the form is printed or saved the javascript checks that all the mandatiry fields are completed and displays a message if some fields are uncompleted. The chrome pdf viewer doesn't display the warning message when the form is saved, and doesn't display the check box included in the warning message pop up to confirm that the user accepts to print the form. The control is correct with FF et IE
Thanks for your help

There are many PDF viewers. Adobe's, third party downloads, things that come with systems (Apple Preview, Microsoft 8 Reader), things built into browsers (Chrome, Firefox...) Adobe's software understands the full set of JavaScript. Some ignoresJavaScript altogether. Some do selected JavaScript. This is a bit of a mess, but nothing can be done about it EXCEPT that you can demand your users use Adobe Reader. Whether they actually will depends on how important your needs are to them.

Problem with the crystal viewer

Hi there,
I have a problem with thw crystal viewer. I have reports developped in Crystal XI that run in vb.net within the "CrystalDecision.Windows.Forms.CrystalReportViewer" object. On all computer client everything works fin except on one of them. When the print button is pressed, it gave a "Object reference not set to an instance of an object" error. Since this error is raised by the "Crystal report windows form viewer" preview window i have no idea why this occured. We tried to uninstall the viewer and reinstall it without chance.
The only thing i can tell is that this client use a "HP deskjet 3420 series" printer. that's the only difference there is on this computer. Anyone as an idea?
Thanks
Ben

Hi Ben,
Try moving that printer to another PC and install the print driver. If it fails there it's likely a driver issue. HP and Cr has a history of problems. Mostly it's HP drivers returning the wrong memory structure size.
If you can find someone who is using Windows XP and Windows 2003 and see if either work. Or possibly plug the printer ina print server and see if that works.
Next option is if you wrote the software you are running run it in debug mode and see if it captures anything when printing. If did not write it then ask the person who did to test it also.
Next option if you want to dig deeper into the cause is go to Windows site and download a program called DebugDiag. Run this program and set it to capture crashes. It will generate a dump file which can be analyzed. It should tell you which API or function caused the crash.
Thank you
Don

Problems with Standard Apps views (eBusiness Suite)

Hi all,
I am working with Oracle Application Express and Oracle eBusiness Suite 11.5.10. We have integrated OAE with EBS, but now we are having problems with the standard views (owner APPS).
I would need the help from somebody that works with OAE and EBS.
Once we want to query one of the standard views, like ap_invoices, it is necessary to initialize the session with a script like this:
begin
DBMS_APPLICATION_INFO.SET_CLIENT_INFO(219);
end;
This script lets us to access to the data from the table AP_INVOICES_ALL using the view AP_INVOICES.
Once I have run the script from SQL Commands (SQL Workshop), I try to run a query using the standard view, for example:
SELECT * FROM apps.ap_invoices
From a Report or from SQL Commands (SQL Workshop) always I get the next error:
"ORA-01722: invalid number."
However, if I run this query from SQL Plus (same db user), there is any problem, the query works and retrieves rows.
If I get the source code of the view, remove all the columns, keeping the next SQL:
SELECT 1
FROM ap.AP_INVOICES_ALL
WHERE NVL(ORG_ID,NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)) = NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)
Run this SQL in OAE and I obtain the error again, however from SQL Plus the query works correctly.
I suppose somebody that works this EBS and OAE has had this problem. How did you solve it?
Thanks in advance.
Regards, Luis
PD. I have tried to not used the views and use the tables filtering the ORG_ID and looks it can work, but I do not like this option.

Luis - I don't know where you are running these blocks - the SQL Command Processor in APEX? Anyway, for every APEX page request the engine executes something like the following, depending on your version:    begin
    dbms_application_info.set_client_info(g_user);
    dbms_session.set_identifier(substr(g_user,1,(64 - length(g_instance)-1))||':'||to_char(g_instance));
    dbms_application_info.set_module('APEX:APPLICATION '||to_char(g_flow_id),'PAGE '||to_char(g_flow_step_id));
    exception when others then null;
    end;In the above code, the value of g_user is the logged-in username, perhaps ADMIN in your case.
Keep in mind that when you do a set_client_info in the database session, that persists only for the duration of the session. On the next page request, you'll get a new database session (or a recycled one).
Scott

Problem with locale

I have a problem with locale.
When I put the locale command in the console.
This is the output:
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
LANG=en
LC_CTYPE="en"
LC_NUMERIC="en"
LC_TIME="en"
LC_COLLATE="en"
LC_MONETARY="en"
LC_MESSAGES="en"
LC_PAPER="en"
LC_NAME="en"
LC_ADDRESS="en"
LC_TELEPHONE="en"
LC_MEASUREMENT="en"
LC_IDENTIFICATION="en"
LC_ALL=
Whats the problem?

Here's mine, just for comparison:
locale.gen
en_GB.UTF-8 UTF-8
en_GB ISO-8859-1
en_US.UTF-8 UTF-8
locale.conf
LANG=en_GB.UTF-8 UTF-8
Output of locale:
LANG=en_GB.UTF-8
LC_CTYPE="en_GB.UTF-8"
LC_NUMERIC="en_GB.UTF-8"
LC_TIME="en_GB.UTF-8"
LC_COLLATE="en_GB.UTF-8"
LC_MONETARY="en_GB.UTF-8"
LC_MESSAGES="en_GB.UTF-8"
LC_PAPER="en_GB.UTF-8"
LC_NAME="en_GB.UTF-8"
LC_ADDRESS="en_GB.UTF-8"
LC_TELEPHONE="en_GB.UTF-8"
LC_MEASUREMENT="en_GB.UTF-8"
LC_IDENTIFICATION="en_GB.UTF-8"
LC_ALL=
Have you also run the command sudo locale-gen?
Last edited by clfarron4 (2013-09-04 00:04:26)

Problem with Inactive DCs...

Hi
I have created and product, software component in SLD. I have done neccessary configurations in CMS.I have successfully imported the software component which i have created in SLD into my NWDS.I can see the software components in my NWDS Developement Configuration perspective.
Now i have created a DC in Inactive DCs view. Its successfully created and i am able see the DC in Local DCs view which i have created but under Inactive DCs view its not visible.
Can u please me what could be the problem..
Best Regards
Ravi Shankar B

Hi
Try to remove and import the cofiguration all over again.Restarting the NWDS might be of help too.
Regards
Krishna
null

Problems with exporting PWA views (grids in general) to Excel 2010 with Windows 8 + IE 10 as a client configuration

Hello,
I wondering if windows 8 + IE10 is a supported client configuration for PWA (Project Server 2010). I am unable to export PWA views to Excel 2010. No problems with Windows 7 + IE8/9
Any ideas?
thanks,
Daniel
Daniel Villacis

Hi,
We followed the below steps in the local machine and check the behavior.
a. Open the Windows registry editor (regedit.exe)
b. Go the location HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\App Paths\excel.exe
c. Here, you’ll see a string value named “useURL”
d. Rename this value to something else. For example “useURLx”
Note: You might have to restart the machine to apply the registry change to take effect.

Printing Problem with Local printer

Hi Experts,
My clients has installed new HP LaserJet p2015dn printer in SAP.
I have used the font "HELVE" in my sap script, when i take the printout with HP leser jet 1022N it gives correct printout. where as when i take the printout with local (HP LaserJet p2015dn) Printer it give the printout in unreadbale format (no spaces between each alphabet)
I can change the font and solve this proble but i have used same font in many forms and the client wish to take the printout with newly installed printer only.
Please help.
Thanks
Ganesh

dear ganesh ,
whn client installed new Hp lajer jet printer , for that client dowload some text file , is is not download in computer thats y smartforms not coming properly
so pls contact client administrator and download all this files which is supported that new printer . thn problem will solve
regards ,
nikhil.

Problem with Local Interfaces (WSAD 5)

I built an Entity Bean with Local Interface and a Remote Interface (apperently they both have the same JNDI name in WSAD)
and when I look up for the name from other Session Bean (same EJB group) and I try to cast it to the local interface there is a classCastException.............
HELP ME

Nidhi
I had the same problems as you that went away. If you have both remote and local interfaces defined, and your remote inerface can be accessed via JNDI lookup using (say) "ejb/sessionbean/stateless/HelloHome", then you can access the local intercafe using "local:ejb/ejb/sessionbean/stateless/HelloHome".
The URL http://localhost:9080/UTC/initialize?port=2809 is very useful to browse the JNDI tree. Just expand "Local EJB beans" and position your mouse over the item of interest. The JNDI lookup name will echo in the bottom (solid) frame of the browser. The only problem is that the jndilookup name will appear (mistakenly) as local:/ejb/ejb/stateless......, just get rid of the first forward-slash to make it look like local:ejb/ejb/stateless....
Hope this helps
Somnath

Problem with local interface

Hi all,
I have a problem with the local interface,
after I change the Home and Local interface I get a message when compiling saying that the bean has to implement the inherited abstract method javax.ejb.EJBLocalObject.isIdentical (EJBLOcalObject) and the mothd isPrimaryKey()...why is that, do I need to implement these methods?
Thanks,
A.

solved, wrong code

A problem with a Materialized View

Hi,
I have a ordinary table with a three column compound primary key (COL_Id, COL_ValidFrom, COL_CaseId)
I also have a MV that selects from that table. This one compiles just fine. It looks like this:
CREATE MATERIALIZED VIEW "MV_02"
REFRESH FORCE ON COMMIT
AS SELECT COL_Id, COL_ValidFrom, MAX(COL_CaseId) CaseId FROM TBL_MediaText GROUP BY COL_Id, COL_ValidFrom;
Works fine. Now I'm trying to create a second MV that selects from the first MV. It looks like this:
CREATE MATERIALIZED VIEW "MV_03"
REFRESH FORCE ON COMMIT
AS
SELECT a.COL_Id, a.CaseId, a.COL_ValidFrom, NVL(MIN(b.COL_ValidFrom)-1, TO_DATE('2099-12-31','yyyy-mm-dd')) ValidTo
FROM MV_02 a, MV_02 b
WHERE a.COL_Id=b.COL_Id(+) AND a.COL_ValidFrom < b.COL_ValidFrom(+)
GROUP BY a.COL_Id, a.CaseId, a.COL_ValidFrom;
This one does not parse. (ORA-12054) There seem to be a probelem with the ON COMMIT command. I have searched the web and found some info on the subject. It tells me to create a MV log, wich I have. I've also tried to put count(*) and count(b.COL_validfrom). But it just wont work.
I see a possibilty of yhe problem laying in te fact that I join using two parts of my PK. Also there might be a problem with the fact that i can't create a log for MV_02 WITH PRIMARY KEY. Or maybe you can't have a MV selecting from another MV?
Do anyone know how i should specify my Logs and/or querys in order for this to parse?
I'm using 10.1, and I do have the ON REFRESH COMMIT-privilege.
Thanks!
Message was edited by:
DavidNils

May be you are trying for this....I don't know how helpful is my solution for you.
SQL> CREATE MATERIALIZED VIEW MVE
2 TABLESPACE JAM
3 REFRESH FORCE ON COMMIT
4 AS SELECT D.DEPTNO,D.DNAME, E.ENAME, E.JOB FROM
5 EMP E, DEPT D
6 WHERE D.DEPTNO = E.DEPTNO(+)
7 /
Materialized view created.
SQL> CREATE MATERIALIZED VIEW MVEF
2 TABLESPACE JAM
3 REFRESH FORCE WITH ROWID
4 AS SELECT * FROM MVE;
Materialized view created.Message was edited by:
Jameel

Problem with Local DCs View in NWDS

Similar Messages

Maybe you are looking for