Problem with log4j.properties and level DEBUG

Hi,
I need some log4j help.
I create 2 different appenders in the log4j.properties file
and it works.
This is my complete log4j.properties:
log4j.logger.log1=DEBUG, log1
log4j.logger.log2=DEBUG, log2
log4j.appender.log1=org.apache.log4j.DailyRollingFileAppender
log4j.appender.log1.File=${StandardLogPath}
log4j.appender.log1.DatePattern='.'yyyy-MM-dd
log4j.appender.log1.Append=true
#log4j.appender.log1.Threshold=DEBUG
log4j.appender.log1.layout=org.apache.log4j.PatternLayout
log4j.appender.log1.layout.ConversionPattern=%d{dd MMM yyyy HH:mm:ss} [%-5p] %-25c{1} %m%n
log4j.appender.log2=org.apache.log4j.DailyRollingFileAppender
log4j.appender.log2.File=${StandardLogQueryPath}
log4j.appender.log2.DatePattern='.'yyyy-MM-dd
log4j.appender.log2.Append=true
log4j.appender.log2.layout=org.apache.log4j.PatternLayout
log4j.appender.log2.layout.ConversionPattern=%d{dd MMM yyyy HH:mm:ss} [%-5p] %-25c{1} %m%nAnd here's my logging code:
import org.apache.log4j.Logger;
Logger log = Logger.getLogger("log1");
Logger logQuery = Logger.getLogger("log2");
log.debug("loggerDebug");
logQuery.debug("loggerDebug");
log.info("loggerInfo");
logQuery.info("loggerInfo");The problem is that "loggerDebug" is not written to all appenders (only "loggerInfo").
In fact if I print:
System.out.println( log.getEffectiveLevel().toString() );result that the level is INFO and I known that if level is INFO then DEBUG is disable.
But why the level is INFO????
Someone can suggest me a solution?
Thank you very much

You're so over-sensitive you: when an OP doesn't respond anymore
to your last reply it implies that you've solved the problem and
(implicitly) that the OP is very grateful to you. Why do you always
have to be so explicit about matters? ;-)
Because I'm not one of those Dutch people ;-)Yes, that's us, the Dutch: mysteriously smiling and keeping silent all the
time. That's why they call us the Asians of Western Europe ;-)
ps. There are nice exception to the rule sometimes though.
Yes, and unfortunately they do seem to be the exception rather than
the rule. It would be nice to catch one a bit more often.True; that's the internet generation: grab all the information that you can
and don't give a f*ck about the guy who supplied the information. It's sad
indeed.
Maybe we should start a support group where we could thank each
other now and then 'on behalf' of those little spoiled brats and complain
about all those bad manners nowadays ;-)
kind regards,
Jos

Similar Messages

  • File not found error with log4j.properties

    Hi,
    I'm writing a web service on weblogic 8.1 with weblogic workshop.I have to use log4j-1.2.7 supplied by client with my application.I cannot write ant script manually.Also I cannot change server start script or cannot put any command line argument when the server starts.
    Now I require this logger in my EJB.I have kept log4j.properties in the same path where my EJB's are.But the final ear produced does not contain this log4j.properties and subsequently I get the error "log4j:ERROR Could not read configuration file [log4j.properties]."
    Please help me to resolve this problem so that log4j.properties goes with the final .ear file and the ejb code finds the logger.
    thanks,
    pratim

    Hello,
    I am having a similar problem. Did you find a solution?
    Thank you,
    Melissa
    "arunak" <[email protected]> wrote:
    >
    Hi Pratim,
    I am also facing the same problem. can u please let me know whenever
    u get the
    solution for this.
    Regards,
    Arunak
    Pratim <[email protected]> wrote:
    Hi,
    I'm writing a web service on weblogic 8.1 with weblogic workshop.Ihave
    to use log4j-1.2.7 supplied by client with my application.I cannot write
    ant script manually.Also I cannot change server start script or cannot
    put any command line argument when the server starts.
    Now I require this logger in my EJB.I have kept log4j.properties inthe
    same path where my EJB's are.But the final ear produced does not contain
    this log4j.properties and subsequently I get the error "log4j:ERROR
    Could not read configuration file [log4j.properties]."
    Please help me to resolve this problem so that log4j.properties goes
    with the final .ear file and the ejb code finds the logger.
    thanks,
    pratim

  • Problem with Data Model and Analysis View

    I create an analyze in BI Publisher and then i create a data model using this object.
    When i try to generate an XML with a number of rows the BI Publisher return an empty XML (Only with de DATA_DS tags but no data).   To bypass this problem i make and XML file by hand and this allow me to create reports and design it but when i try to view the reports i got the message that says "No Data Found".
    So i was check the analysis and all looks appears to be fine,  In the results tab it show me a complete table with the data i was looking to use.
    So i try to repeat the error and when  i try to create the XML for the Data Model i found this two error in the logs:
    [root@server ~]# [2013-07-17T16:37:22.844-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b34,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:37:26.828-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:37:26.865-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 2361] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2b3a,0] [APP: bipublisher#11.1.1] oracle.xdo.servlet.CreateException: Path: /FOLDER/MODEL.xdm is not pointing to a report. Actual type: ReportItem, sub-type: DataModel[[
            at oracle.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
            at java.lang.Throwable.<init>(Throwable.java:196)
            at java.lang.Exception.<init>(Exception.java:41)
            at oracle.xdo.servlet.ReportException.<init>(ReportException.java:36)
            at oracle.xdo.servlet.CreateException.<init>(CreateException.java:18)
            at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:104)
            at oracle.xdo.servlet.ReportRepository.getReport(ReportRepository.java:128)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.getDataModelPath(DataProcessorFactory.java:207)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:99)
            at oracle.xdo.servlet.dataengine.DataProcessorFactory.isSemanticLayerDataModel(DataProcessorFactory.java:78)
            at oracle.xdo.servlet.ReportModelContextImpl.getReportXMLData(ReportModelContextImpl.java:157)
            at oracle.xdo.servlet.CoreProcessor.process(CoreProcessor.java:346)
            at oracle.xdo.servlet.CoreProcessor.generateDocument(CoreProcessor.java:101)
            at oracle.xdo.servlet.ReportImpl.renderBodyHTTP(ReportImpl.java:1074)
            at oracle.xdo.servlet.ReportImpl.renderReportBodyHTTP(ReportImpl.java:639)
            at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:492)
            at oracle.xdo.servlet.XDOServlet.writeReport(XDOServlet.java:462)
            at oracle.xdo.servlet.XDOServlet.doGet(XDOServlet.java:280)
            at oracle.xdo.servlet.XDOServlet.doPost(XDOServlet.java:313)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
            at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
            at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
            at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
            at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
            at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.metadata.track.MostRecentFilter.doFilter(MostRecentFilter.java:64)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:125)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.xdo.servlet.init.InitCheckingFilter.doFilter(InitCheckingFilter.java:63)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(Native Method)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
            at java.security.AccessController.doPrivileged(Native Method)
            at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
            at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
            at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
            at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
            at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
            at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
            at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
            at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
            at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
            at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
            at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
            at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
            at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
            at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    And when i try to view the report that use the analysis i got this two warning in the logs:
    [2013-07-17T16:58:01.615-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d7c,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    [2013-07-17T16:58:02.034-04:00] [bi_server1] [WARNING] [] [oracle.xdo] [tid: 57] [userId: <anonymous>] [ecid: ad7bb40a72b553c0:-3e5f91c5:13ecd037992:-8000-00000000000e2d84,0] [APP: bipublisher#11.1.1] Incomplete xslt._XDONFSEPARATORS: decimal separator: null, grouping separator: null
    As i understand there is has a reference to a null value but i cant find what column of the analysis has the problem.
    Any ideas about how to solve or debug this?
    Thanks

    I follow your instructions and it works fine. I can create the XML and the reports can show data.
    So, i already know that there is no problem with the data and with the BI Publisher installation but i still doesn know what is the problem with the analysis view that fails.
    Any idea how to debug it?
    Thanks.

  • Photosho cs4 - problem with filter liquify and gallery

    Hello averydoby, when i try to open the filters liquify and the gallery filters happens that before you open takes 10 minutes to load and when you open the program takes any action carried out for 2-3 minutes. The problem essentially is that charge too.
    I own a compute macbook pro with 512 mb video card and 2 gb of ram, I have also tried to use the filters with images of a few kb but the same thing happens.
    Someone knows what could be the problem?
    Thanks to all

    I asked because I had the same problem with PS CS2 and mac OS 10.2.8 on a 2 x 1Ghz mac.
    (adbobe level 3 Support was able to reproduce the error but there was no solution)
    I don't have the this Problem neither with PS CS4 nor PS CS2 on a mac pro (early 2008) running mac os 10.5.6 anymore.
    I was just curious if I 'd have an idea to solve this problem.

  • Problem with m3u files and Quicktime

    Hello:
    I have made one update with Quicktime software (version 7.6.9 1680.9). The problem is that Quicktime player reproduces mp3 files but when I try to play m3u files the sound is very bad. It sounds like gargling.
    For example: This files play ok:
    http://www.telefonica.net/web2/sevarra/Sarabande.mp3
    It plays ok when the previous link is introduced as URL address in Quicktime player, but the corresponding m3u files sounds like gargling
    http://www.telefonica.net/web2/sevarra/list0.m3u
    I think there a problem with m3u files and Quicktime.
    Tank you very much and best regards.

    I have discovered that when the URL is playing (with gargling sound) if I open the A/V controls in QT menus and I move the Jog Shuttle or the Speed level then the sound becomes good.
    Yes! Great catch, ttfrank. I can replicate that too.
    Interesting ... if (after getting the sound working properly again) you then pause play of the m3u, and start it again, you get the gargling/dalekish sound quality back again.
    Bug reporting ... there's a couple of ways you can go about doing this. You can use the QuickTime product feedback form:
    http://www.apple.com/feedback/quicktime.html
    ... but if you want to track progress on the bug, try instead registering as an Apple Developer (for free):
    http://developer.apple.com/programs/register/
    ... and then you'll be able to submit the bug via the Apple Bug Reporter:
    http://developer.apple.com/bugreporter/
    In the meantime, there's also a restricted forum available to level 4 and 5 members ("Notable New Technical Issues") where we can report this sort of thing. I'll try to get a post written up on the topic there later today.

  • Problems with Log4j/commonslogging

    I'm having some weird problems with log4j or commons/logging. I'm not at all
    excluding that they may be my own fault, but I can't get to the actual
    problem. Hope someone can help me out. I'm getting an exception at startup
    of the VM. The exception is below. The problem seems to be version related I
    think, but I can't figure it out exactly, since the versions of both logging
    and log4j I have in my path seem to be exactly equal to those in my 2.5 RC1
    distrib.
    Hope you can help out,
    Martin van Dijken
    PS: This isn't the entire excep, hope it's enough
    1652 ERROR [main] kodo.Runtime -
    org.apache.commons.logging.LogConfigurationException:
    org.apache.commons.logging.LogConfigurationException:org.apache.commons.logg
    ing.LogConfigurationException: Class
    org.apache.commons.logging.impl.Log4JCategoryLog does not implement Log
    org.apache.commons.logging.LogConfigurationException:
    org.apache.commons.logging.LogConfigurationException:org.apache.commons.logg
    ing.LogConfigurationException: Class
    org.apache.commons.logging.impl.Log4JCategoryLog does not implement Log
    at
    org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.ja
    va:555)
    at
    org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.ja
    va:289)
    at org.apache.commons.logging.LogFactory.getLog(LogFactory.java:409)
    at
    com.solarmetric.modules.tools.compiler.MetaDataParser.<init>(MetaDataParser.
    java:32)
    at
    com.solarmetric.modules.tools.compiler.CFMetaDataParser.<init>(CFMetaDataPar
    ser.java:39)
    at
    com.solarmetric.kodo.meta.JDOMetaDataParser.<init>(JDOMetaDataParser.java:61
    at
    com.solarmetric.kodo.meta.ClassMetaData.getInstance(ClassMetaData.java:223)
    at
    com.solarmetric.kodo.impl.jdbc.JDBCPersistenceManagerFactory.registerClassIn
    ternal(JDBCPersistenceManagerFactory.java:444)
    at
    com.solarmetric.kodo.impl.jdbc.JDBCPersistenceManagerFactory.registerClass(J
    DBCPersistenceManagerFactory.java:334)
    at
    com.solarmetric.kodo.impl.jdbc.RegisterListener.registerClass(RegisterListen
    er.java:53)
    at javax.jdo.spi.JDOImplHelper.registerClass(JDOImplHelper.java:269)
    at
    com.madocke.mirakel.forum.ForumMessage.<clinit>(ForumMessage.java)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:217)
    at
    com.solarmetric.kodo.util.MultiLoaderClassResolver.resolveClass(MultiLoaderC
    lassResolver.java:85)
    at
    com.solarmetric.kodo.util.MultiLoaderClassResolver.canResolveClass(MultiLoad
    erClassResolver.java:143)
    at
    com.solarmetric.modules.tools.compiler.CFMetaDataParser.classForName(CFMetaD
    ataParser.java:231)
    at
    com.solarmetric.modules.tools.compiler.CFMetaDataParser.classForName(CFMetaD
    ataParser.java:180)
    at
    com.solarmetric.modules.tools.compiler.CFMetaDataParser.classForName(CFMetaD
    ataParser.java:165)
    at
    com.solarmetric.kodo.meta.JDOMetaDataParser.startClass(JDOMetaDataParser.jav
    a:122)
    at
    com.solarmetric.modules.tools.compiler.CFMetaDataParser.startElement(CFMetaD
    ataParser.java:53)
    at
    com.solarmetric.modules.tools.compiler.MetaDataParser.startElement(MetaDataP
    arser.java:238)
    at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown
    Source)
    at org.apache.xerces.impl.dtd.XMLDTDValidator.startElement(Unknown
    Source)
    at
    org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unkno
    wn Source)
    at
    org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatc
    her.dispatch(Unknown Source)
    at
    org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown
    Source)
    at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
    at org.apache.xerces.parsers.DTDConfiguration.parse(Unknown Source)
    at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
    at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)

    What is probably happening is a class loader issue... I would put
    jakarta's logging jar in the same place as log4j and be sure that they
    aren't extraneously in the classpath (such as in an EAR or WAR). Java
    can be pretty funky about classloaders and interfaces.
    On Fri, 16 May 2003 11:02:40 -0400, Alex Roytman wrote:
    Are you running it standalone or under lets say tomcat 4?
    "Martin van Dijken" <[email protected]> wrote in message
    news:[email protected]...
    I'm having some weird problems with log4j or commons/logging. I'm not atall
    excluding that they may be my own fault, but I can't get to the actual
    problem. Hope someone can help me out. I'm getting an exception at startup
    of the VM. The exception is below. The problem seems to be version relatedI
    think, but I can't figure it out exactly, since the versions of bothlogging
    and log4j I have in my path seem to be exactly equal to those in my 2.5RC1
    distrib.
    Hope you can help out,
    Martin van Dijken
    PS: This isn't the entire excep, hope it's enough
    1652 ERROR [main] kodo.Runtime -
    org.apache.commons.logging.LogConfigurationException:
    org.apache.commons.logging.LogConfigurationException:org.apache.commons.logg
    ing.LogConfigurationException: Class
    org.apache.commons.logging.impl.Log4JCategoryLog does not implement Log
    org.apache.commons.logging.LogConfigurationException:
    org.apache.commons.logging.LogConfigurationException:org.apache.commons.logg
    ing.LogConfigurationException: Class
    org.apache.commons.logging.impl.Log4JCategoryLog does not implement Log
    at
    org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactoryImpl.ja
    va:555)
    at
    org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactoryImpl.ja
    va:289)
    atorg.apache.commons.logging.LogFactory.getLog(LogFactory.java:409)
    at
    com.solarmetric.modules.tools.compiler.MetaDataParser.<init>(MetaDataParser.
    java:32)
    at
    com.solarmetric.modules.tools.compiler.CFMetaDataParser.<init>(CFMetaDataPar
    ser.java:39)
    at
    com.solarmetric.kodo.meta.JDOMetaDataParser.<init>(JDOMetaDataParser.java:61
    at
    com.solarmetric.kodo.meta.ClassMetaData.getInstance(ClassMetaData.java:223)
    at
    com.solarmetric.kodo.impl.jdbc.JDBCPersistenceManagerFactory.registerClassIn
    ternal(JDBCPersistenceManagerFactory.java:444)
    at
    com.solarmetric.kodo.impl.jdbc.JDBCPersistenceManagerFactory.registerClass(J
    DBCPersistenceManagerFactory.java:334)
    at
    com.solarmetric.kodo.impl.jdbc.RegisterListener.registerClass(RegisterListen
    er.java:53)
    atjavax.jdo.spi.JDOImplHelper.registerClass(JDOImplHelper.java:269)
    at
    com.madocke.mirakel.forum.ForumMessage.<clinit>(ForumMessage.java)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:217)
    at
    com.solarmetric.kodo.util.MultiLoaderClassResolver.resolveClass(MultiLoaderC
    lassResolver.java:85)
    at
    com.solarmetric.kodo.util.MultiLoaderClassResolver.canResolveClass(MultiLoad
    erClassResolver.java:143)
    at
    com.solarmetric.modules.tools.compiler.CFMetaDataParser.classForName(CFMetaD
    ataParser.java:231)
    at
    com.solarmetric.modules.tools.compiler.CFMetaDataParser.classForName(CFMetaD
    ataParser.java:180)
    at
    com.solarmetric.modules.tools.compiler.CFMetaDataParser.classForName(CFMetaD
    ataParser.java:165)
    at
    com.solarmetric.kodo.meta.JDOMetaDataParser.startClass(JDOMetaDataParser.jav
    a:122)
    at
    com.solarmetric.modules.tools.compiler.CFMetaDataParser.startElement(CFMetaD
    ataParser.java:53)
    at
    com.solarmetric.modules.tools.compiler.MetaDataParser.startElement(MetaDataP
    arser.java:238)
    atorg.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown
    Source)
    at org.apache.xerces.impl.dtd.XMLDTDValidator.startElement(Unknown
    Source)
    at
    org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unkno
    wn Source)
    at
    org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatc
    her.dispatch(Unknown Source)
    at
    org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown
    Source)
    at org.apache.xerces.parsers.DTDConfiguration.parse(UnknownSource)
    at org.apache.xerces.parsers.DTDConfiguration.parse(UnknownSource)
    at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
    at org.apache.xerces.parsers.AbstractSAXParser.parse(UnknownSource)
    Steve Kim
    [email protected]
    SolarMetric Inc.
    http://www.solarmetric.com

  • Flash Player 10, strange problem with emdedded fonts and movieclips

    Hello, developers! I have a big problem with font embedding
    and I can not debug it myself. So I need you help.
    I' ve done a simple list of attached movieclips with
    textfields inside them, with embedded fonts. I have no problem with
    flash player 9 in order to see the list, but in flash player 10 I
    can't see it. The font is very common, Arial actually so you can
    test it very easily. I am using a font symbol in the library, a
    class and an xml file for my data.
    Also you can see it online in (if you have flash player 10
    you can't see a thing)
    http://www.forestonfire.com//research/flash/fontproblem/index.html
    I have compiled the file as an exe projector in order to see
    it as I do in flash player 9
    http://www.forestonfire.com//research/flash/fontproblem/fontinflash9.zip
    I have zipped also the source code in order to compile it
    yourself.
    http://www.forestonfire.com/research/flash/fontproblem/fontembedded.zip
    and the same example without embedded fonts (I have the same
    problem there so perchaps are not the fonts)
    http://www.forestonfire.com/research/flash/fontproblem/fontnotembed.zip
    Please, check it and tell me if there is a solution
    available. Thank you in advance.

    I've included also a much more simple example without the xml
    and the font symbol, only the class and a movieclip from the
    library, but I can't still see it on flash player 10
    http://www.forestonfire.com/research/flash/fontproblem/simplyfied.zip
    I have no clue about this problem.

  • Problems with ListViews Drag and Drop

    I'm surprised that there isn't an Active X control that can do this more
    easily? Would
    be curious to find out if there is - although we aren't really embracing the
    use of
    them within Forte because it locks you into the Microsoft arena.
    ---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
    PM ---------------------------
    "Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
    Please respond to "Stokesbary, Michael" <[email protected]>
    To: "'[email protected]'" <[email protected]>
    cc:
    Subject: Problems with ListViews Drag and Drop
    I am just curious as to other people's experiences with the ListView
    widget when elements in it are set to be draggable. In particular, I am
    currently trying to design an interface that looks a lot like Windows
    Explorer where a TreeView resides on the left side of the window and a
    ListView resides on the right side. Upon double clicking on the
    ListView, if the current node that was clicked on was a folder, then the
    TreeView expands this folder and the contents are then displayed in the
    ListView, otherwise, it was a file and it is brought up in Microsoft
    Word. All this works great if I don't have the elements in the ListView
    widget set to be draggable. If they are set to be draggable, then I am
    finding that the DoubleClick event seems to get registered twice along
    with the ObjectDrop event. This is not good because if I double click
    and the current node is a folder, then it will expand this folder in the
    TreeView, display the contents in the ListView, grab the node that is
    now displayed where that node used to be displayed and run the events
    for that as well. What this means, is that if this is a file, then Word
    is just launched and no big deal. Unfortunately, if this happens to be
    another directory, then the previous directory is dropped into this
    current directory and a recursive copy gets performed, giving me one
    heck of a deep directory tree for that folder.
    Has anybody else seen this, or am I the only lucky one to experience.
    If need be, I do have this exported in a .pex file if anybody needs to
    look at it more closely.
    Thanks in advance.
    Michael Stokesbary
    Software Engineer
    GTE Government Systems Corporation
    tel: (650) 966-2975
    e-mail: [email protected]

    here is the required code....
    private static class TreeDragGestureListener implements DragGestureListener {
         public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
         // Can only drag leafs
         JTree tree = (JTree) dragGestureEvent.getComponent();
         TreePath path = tree.getSelectionPath();
         if (path == null) {
              // Nothing selected, nothing to drag
              System.out.println("Nothing selected - beep");
              tree.getToolkit().beep();
         } else {
              DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
                   .getLastPathComponent();
              if (selection.isLeaf()) {
              TransferableTreeNode node = new TransferableTreeNode(
                   selection);
              dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
                   node, new MyDragSourceListener());
              } else {
              System.out.println("Not a leaf - beep");
              tree.getToolkit().beep();
    }

  • Problems with Customer Service AND unexplained charges!

    I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
    Does anyone have these reoccuring problems!?

    I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
    After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
    All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
    "they should" does not help my bill with the extra armount of charges.

  • Problems with dropped calls and no reception on Samsung Continuum

    My mother and I both purchased a Samsung Continuum in late March 2011, and have experienced the same problems with the phone.  The device drops at least 2-3 calls per day, often on the same conversation; we have not found that location or time of day makes a difference.  The phone freezes up frequently, even if no apps are running in the background.  We lose our 3G network reception frequently, and cannot access our texts, emails, or the internet.  The screen saver kicks in even when we are actively dialing a number, or typing in a text message.  The overall performance of the phone is also poor, and it is quite slow much of the time.
    We have raised this issue several times with a representative at one of the Verizon stores, but he states that he can find no problem with the phone, and that these issues may not be covered under our insurance plan.  None of my friends with non-Samsung phones are having the same problems with phone reception and performance.  I am aggravated enough with these issues that I am considering reactivating my old Blackberry, which worked like a charm.
    I am not upset that my phone has not been updated to Android 2.2.  I just want the phone to perform as stated, and not fail at its primary function:  making and receiving phone calls.  I am not certain if these problems originate with the phone, Verizon, or Samsung, nor do I care.  I just want to resolve these issues as soon as possible, or I will have to look at other alternatives.
    Thank you.

    If this doesn't work...now what??? I have a useless $400 plus piece of unreliable junk. My Motorola Razor was ions more reliable than this phone...very, very sad but true.
    What carrier were you using with the Razor? AT&T? Same area?
    Dave M.
    MacOSG Founder/Ambassador  An Apple User Group  iTunes: MacOSG Podcast
    Creator of 'Mac611 - Mobile Mac Support' (designed exclusively for an iPhone/iPod touch)

  • Problems with Mail, Safari and iTunes after updating to 10.5.6

    Hi all,
    after installing 10.5.6 I have problems with Mail, Safari and iTunes.
    The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
    Any idea or workaroung to solve that problem?
    Regards
    Michael

    First, run Disk Utility and repair permissions and then restart.
    I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

  • Problems with the richTextEditor and quotes

    Hello
    I'm having problems with quote chars and the richText
    control's htmlText. When users enter quotes into the richTextEditor
    control. The quotes breaks the HTML text, meaning it's no longer
    well formatted. Is there an escape char that I need to use. Or do I
    need to force some kind of refresh on the control prior to using
    the htmlText string?

    I have been using RTE in a content management system and
    found a need to replace non-standard quote characters with proper
    UTF-8 character counterparts. Curly quotes in particular are
    problematic. Use a replace function to substitute non-standard for
    standard characters.

  • Problems with .ARW files and auto toning

    problems with .ARW files and auto toning
    let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
    now that I have a Sony A7R the problem is more serious
    Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
    but when I upload them to lightroom, they come out near black.
    allow me to explain
    lets say I import 100 images
    i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
    as the images import i see a preview in the thumbnail which looks fine.
    i double click on one to enlarge it, hence leave grid view.
    for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
    one by one as it inspects each image, if it was a DRO image it makes it too dark.
    to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
    how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
    i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
    but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
    now i have to tweak each file or find a profile for it which is added work.
    any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
    there are 2 phases...one is when it originally imports and they look fine
    second is scanning each image and applying some kind of toning which darkens it too much.
    thanks for the help

    sorry thats the auto reply message from yahoo email.
    i've disabled it now
    thing is, there is no DRO jpg to download from the camera
    its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
    but then sadly reverts it to no DRO settings.
    because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
    so in reality there is no point in using DRO because when i upload it lightroom removes it.
    is there a way to tell lightroom to preserve the jpg preview as it first sees it.
    its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
    what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

  • Problems with itunes 8 and ipod shuffle gen 2.

    Problems with itunes 8 and ipod shuffle gen 2.
    I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
    When i try to drag songs directly on it, itunes says i can't
    I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
    Computer Specs
    Windows XP SP3
    384MB of Ram (works really good)
    USB 1.1 connection
    Pentium 4 clocked at 1.285 GHZ
    IPOD Shuffle Specs
    2nd Generation
    1GB (964MB)
    Version 1.0.4
    unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
    All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
    Itunes Specs:
    Version 8.1.1.10

    This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
    Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

  • I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

    I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
    If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

    Hi David-
    The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
    http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Maybe you are looking for