Problem with Logic Board in a Macbook Pro 15" 2011 in Argentina

Hi I am from Argentina and I am reporting a problem I've had a few weeks ago:
I was working with my computer (MacBook Pro 15 inch Late 2011) and it suddenly stopped working; the screen was frozen. I proceeded to restart it, but it couldn't enter the operative system, showing a gray screen.
Given this huge problem, I took my MacBook Pro to an authorized support centre in my country (Mac Station, 1184 Ayacucho , Buenos Aires - Argentina). The people there told me that the Logic Board was damaged. For this reason they set a budget of 2.440 dollars for the replacement part – plus the installation cost of 120 dollars. They were trying to charge me the equivalent to a new MacBook Pro model MGXC2LL/A purchased in the USA.
On the web it is documented that the 2011 MacBook Pro has recurrent failures on the Logic Board. How can it be that the total cost of repair in my country is five times the cost of repairing it in the United States? I think their official resellers in Argentina are taking advantage of us.
How I can get in touch with Apple support or someone who can give me a reason for that cost? Can I recieve official Apple answer in this comunity?
In advance: I haven't got Apple Care because Official Reseller from Argentina said me that Apple had discontinued in South America.
Maria Emilia
Buenos Aires, Argentina

Thanks muchly will check it out now.

Similar Messages

  • I know that there has been a big problem with logic boards on the MacBook Pro - shouldn't there be a recall? When I searched online about this problem was surprised to see so many MacBook Pro users with the same problem.

    My computer was on one minute and off the next and will not restart. I took it to the apple store and
    They said it is the logic board. I have been researching it and see that many MacBook Pro users have
    Had the same issue. Doesn't seem fair to have to pay for something faulty on Apple's end. The computer
    Is less than 3 years old. I expected it to work for a lot longer than this. Is there anything I can do that won't
    Cost me? Also, how do I retrieve my files. I know they are on the hard drive but how do I get to them without
    Having apple do it and probably charge me?
    <Subject Edited by Host>

    Did you buy AppleCare?
    I guess not or you wouldn't be complaining.
    how do I retrieve my files. I know they are on the hard drive but how do I get to them without
    Having apple do it and probably charge me?
    Easy, open it up, remove the drive and use a SATA to USB adapter to another Mac (or Windows PC with MacDrive)
    My computer is dead, is my personal data lost?
    For iPhoto Library, that's really a folder (it looks like a package) it can be right clicked on by OS x and "show package contents" to get the Origianls out.
    However I don't know right off hand how that would appear on a Windows PC, perhaps as a iPhoto Library folder, perhaps not.
    But the files are on the drive, and Data Rescue (Windows) can always be used to grab them directly.
    iTunes Library can be transfered to a PC, as long as the account name is the same, it should work fine and maintain your playlists hopefully, but the music is easily accessible.

  • I'm going next week to the usa(I'm from Brazil) and i need the logic board for Apple MacBook Pro 15" A1286 where can i get it?, I'm going next week to the usa(I'm from Brazil) and i need the logic board for Apple MacBook Pro 15" A1286 where can i get it?

    I need to buy a logic board for 
    Apple MacBook Pro 15" A1286, but i couldn´t find online to buy it where can i get one and if it´s possible if i can have it delivered to my hotel

    There are a lot of MacBook Pros with the model # A1286 - which year is your model (e.g., "15-inch Late 2011")?
    The only place that I know that you might could score a specific logic board is www.ifixit.com. They may be able to ship to your hotel.
    Clinton

  • I need to find an Unibody 2.66GHz core i7 logic board  for my MacBook Pro 15"

    I need to find an Unibody 2.66GHz core i7 logic board  for my MacBook Pro 15". Where can I find it?

    have you searched the internet? perhaps ifixit.com might have one.

  • I have a brand new hp officejet 6700 premium e-all-in-one printer but my macbook pro is not detecting the printer to even install it or make a print can some one tell me if it is a problem with the printer or the macbook pro?

    can some one help me with the question ..

    no not at all..it was just tested if it was being detected on a windows os..it did..i am doubting either it is a problem with the router or the macbook pro....but earlier it did connect well to a hp officejet pro 8600 e-all-in-one printer over a different network(at someone else's house)...

  • The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

    The logic board on my MacBook Pro has failed. How do I retrieve all my data from the hard drive?

    Remove the drive and put it in an external enclosure. Backup the drive completely. Repartition and format the drive. Replace the drive into the computer. Take the computer in for the logicboard replacement.

  • HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

    Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

    Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
    Ian Turner wrote:
    Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
    Ian

  • I have a problem with my Imessage at my macbook pro ,its says it can contact the server and i cant use it ,please solve me this problem

    i have a problem with my Imessage at my macbook pro ,its says it can contact the server and i cant use it ,please solve me this problem

    I am having the exact same problem with the iMessage on both my MacBook pro and my iphone4. It either says the username/password is incorrect or it can not contact the server. Facetime and iCloud works just fine with the same apple id and password. Somebody please help, I am beyond frustrated!

  • Will Windows 7 Pro run with 16GB of Ram in Macbook Pro Early 2011 13-inch?

    Will Windows 7 Pro run with 16GB of Ram in Macbook Pro Early 2011 13-inch?, Does the brand of the Ram matter ?
    I installed Crucial 16 gb and the Mac runs just fine but Windows won't start. It gets to the login screen then it turns white.

    I decided to make another try today after some reading and googling the internet.
    I started windows with my old 4GB memory and changed the bootconfiguration with msconfig. I typed manually in max memory tp 16384 MB and saved the settings. Then I turned it off and inserted the 16GB ram again. Then it started really but when looking at the properties of my computer it says 16 GB installed but I can only use 2,16GB. So I opened msconfig again and changed the settings once more and restarted. Now it says 16GB installed but I can use 14,2GB so I guess it is ok now for some strange reason. I suppose the lost 1,8GB is for the system ?? Do I dare to turn it off again :-) what will it say next time ?
    I am so happy and greatful for all your help, I really really appreciate it and I hope my solution will come to use for someone else with same problem.
    Thank You all :-)

  • Where Can i buy a Brand New Logic Board for my Macbook Pro?

    My Macbook Pro (Mid 2010 13") logic board got fried, so i was just wondering if possible, where i could get a new logic board. Also, would the new 2011 i7 logic board (if purchasable), for the 13" as well be compatible with the chassis/body of my mac?

    Apple would be the main supplier of any replacement parts.

  • I use MacbookPro late 2011 with Maverick, when i put iPhone 5 or another cellphone askew on left corner of touch pad and slide it to keyboard, the macbook will sleep, i don't know what the problem is, it occur on another macbook pro late 2011

    I use MacbookPro late 2011 with Maverick, when i put iPhone 5 or another cellphone askew on left corner of touch pad and slide it to keyboard, the macbook will sleep, i don't know what the problem is, it occur on another macbook pro late 2011

    It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
    As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
    Was there an update maybe ?

  • Is the graphic board part of logic board on a MacBook pro

    Is the graphic board part of logic board on a MacBook pro

    Yes, the GPUs in all Apple notebooks are soldered to the logic boards. They can't be replaced, upgraded or modified.

  • After replacing the logic board in my Macbook Pro it will no longer connect to the App Store.

    I recently had to replace the logic board in my early 11 Macbook Pro (first gen i7).  With the release of Yosemite just a few weeks away I am trying to update from Snow Leopard 10.6.8 to Mavericks.  I'm afraid if I don't after this update it will become much harder.  I always lived by the rule if it ain't broke and for a long time Snow Leopard worked very well for what I needed to do.  All my software is current and there are no updates pending.  All my Keychain Access System Roots Certificates are good and I have no problems getting into iTunes.  I thought it might be something on Apples end but after 36 hours it's still the same problem.  When I try to open the App Store I get this:
    Any ideas.  I don't use the App Store that much but until this I had never had this problem before.
    Thanks for the help.
    -Chris

    From the menu bar, select
               ▹ About This Mac
    Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.

  • The Logic Board of my MacBook Pro Retina Display stopped working.

    I purchased my MacBook Pro Retina Display 13 months ago. Barring a few errors the computer functioned beautifully, and I maintained it with the care it deserved. On Wednesday, last week, the laptop ceased to work completely. It wouldn't start, or charge. On submitting it for repair, I was informed that the logic board failed. Since its warranty lapsed a month ago, $1050 is required for its replacement. That outrageous amount is more than half of what I paid initially for the laptop. The service provider would not agree to any concession, or plea.
    For an Apple enthusiast, it is very disheartening to learn that its foremost product stops operating in this manner. I am a high school senior, who has accustomed himself to his computer, and cannot at this time purchase a new laptop, let alone a Windows laptop. With college admission deadlines fast approaching, I solicit your help and suggestions, very desparately.

    As much as it will suck to hear this answer, there really is no solution. Because the computer is now out of warranty, you have to pay the full $1050 to get the logic board replaced. I know this is a large sum of money, but you have to remember that the logic board includes the CPU, Graphics Card and RAM, all soldered onto the board. You're paying to replace all of the most expensive components of your computer, even if only one of them failed.
    So, long story short, you'll have to either pay to replace the logic board, because it's out of warranty, or buy a new computer.

  • Problem with Snow Leopard on new macbook pro?

    OK here's the problem
    I just bought a new unibody macbook pro with 17 inch screen because I had previously got a 15 inch and am now selling as I realised it doesn't have an Expresscard slot which I want to help me mix music.
    The computer came with Lion and because I use all kinds of software and lots of freeware I actually want to continue using my old operating system (10.6.7) so everything runs as it did straight away.
    So I installed the OSX disk that came with the 15 inch MBP on the new 17 inch MBP, and it ostensibly worked..
    But now the shortcut buttons like volume and brightness don't work, no matter whether I check or uncheck the box in System Preferences about "standard function keys".. and when I click on Trackpad it claims "No Trackpad found"
    Bit miffed..any ideas what's going on?
    thanks
    J

    jcloth wrote:
     Bit miffed..any ideas what's going on? 
    The grey disks come with hardware drivers that are specific to a particular Mac model.
    You also cannot boot from OS X install disks that are earlier than what the Mac came with from the factory (in this case Lion)
    Your in luck that you have another Mac, because all you need is a Firewire cable to (first step) hold T boot the new Mac's hard drive to the desktop of the older Mac.
    But you need the Snow Leopard retail install disks (white, not grey) to (second step) c boot off the older Mac so you can Disk Utility Erase and format HFS and install Snow Leopard on the new Mac.
    Snow Leopard will boot off some 2011 Lion Mac machine because the hardware drivers exist on Snow Leopard disks, just have to have the right disks and the grey disks from another Mac doesn't do it.
    You may want to take a look at this thread, there are instructions to combine the 10.6.3 and the Combo Update into one disk and more help.
    https://discussions.apple.com/thread/3264421?start=0&tstart=0
    Once you get Snow Leopard working on your machine, be sure to make a Carbon Copy Cloner or two to a HFS external drives as you have no boot disks.

Maybe you are looking for

  • How Can I do an export that from Final Cut Pro 7 that is specific to these settings?

    Hi I am current trying to export out a movie from Final Cut Pro 7 but the settings that are required are very specific and I was going to try it through compressor as well but I wasn't sure if that would work either. Here are the settings: HD: 1 Vide

  • I can no longer connect my N86 to my PC to sync th...

    It just won't connect to the computer. I click to connect my device (on Ovi) and it says to connect using the USB lead then it says it doesn't recognise and to try again. Please help, I have loads of photos on the phone now and I want to download the

  • A few questions if I may

    Hi, I really like the software and I was surpised to see some of the feedback from code warriors, what's wrong with a bit of good old drag and drop? We can always tidy the code afterwards. I think it will cut down on design time for those of us bette

  • Screen resolution issue

    1. when clicking on a menu bar item, i get a double view , very small of what the dropdown menu should look like, and it is not stable: it tries to zoom in/out. 2. on the same menu item , i get the dropdown sometimes in very large view . 2. when clic

  • Problem in adding of tab in MIGO

    hi all,      I added one tab in MIGO at item details. i created one program and designed one screen. here i am calculating batch code based on screen fields . i need to update standard batch code field with my calculated batch code.  How to update fi