Problem with Logitec QuickCam Fusion...

I picked one up today. I tried to connect it to an Intel Mini running 10.4.9. When I plug it in, nothing happens. I open iChat and it says no camera connected. When I go to "more info" in the "about this mac" section, it says a USB device is connected. What do I do?

Hi adub28,
Welcome to the Apple Discussions
Did the box say this camera was UVC (USB Video Class) compliant ?
If not you will need an Add-On called iChatUSBCam
And the Mac drivers for it.
11:44 AM Monday; July 16, 2007

Similar Messages

Audigy problem with Logitech QuickCam Fusion Driv

The new Logitech QuickCam Fusion camera driver software somehow causes the 4. and 5. to get messed on my Windows XP (sp2) computer.
I spent a long time tracking the problem down including swapping out the Audigy itself, testing speakers on another computer, reinstalling creative drivers, bios, board drivers, etc. It didn't dawn on me that the Logitech driver would ever cause that kind of problem, so it was the last thing I checked.
It causes the front speaker sounds to come out the rear speakers and the rear and center channels to get whisper quiet. And, all sounds come out of all of the speakers somewhat.
Removing the QuickCam Fusion web camera driver instantly corrects the problem.
I would like to know if others who have the Audigy, Audigy 2, and X-Fi have the same problems after installing the Logitech Fusion Web Cam.
Could one of the Creative forum monitors kindly would check out this problem?
Thanks
JN

One thing you might try to see if this corects the problem is to look in your control panel, and then sound, and there have you checked to be sure that the sound card and not the Logtiech Quick Cam is the default sound device? I know that some of those devices have their own microphone and codecs and those become the default after you install them. It will make the camera the default sound device. Sometimes they even plug into your "line-in" though not always.
Cheers,
jmacguire

Equium A60 doesn't work properly with Logitech Quickcam Fusion

Has anyone managed to use a Logitech Quickcam Fusion webcam with an Equium A60 ?
I've installed the latest available drivers and software and most times it just screws up the operation of the PC. It eventually hangs so badly that I can't even recover using Windows Task Manager!! If I leave the USB lead connected to the PC, 9 times out of ten, it won't boot up into Windows, until I remove the lead :(
I've installed the same software and drivers on my Desktop PC and the camera works fine every time and boots OK with the camera connected to a USB port.
Both PCs are using Win XP with SP2 and all released updates.

Hello Bill
Do you have problems with USB ports if you use other devices? I really don?t know what the problem can be. Check Logitech SUPPORT PAGE
Maybe you will find some advice there.

Problem with starting Compiz Fusion in KDEmod 4.1

I downloaded the compiz-fusion packages and the plugins, but when I try to run fusion-icon I get this error output:
No protocol specified
* Detected Session: kde
* Searching for installed applications...
* No GLX_EXT_texture_from_pixmap with direct rendering context
... nor with indirect rendering, this isn't going to work!
* Using the GTK Interface
No protocol specified
/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py:72: GtkWarning: could not open display
warnings.warn(str(e), _gtk.Warning)
/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py:207: Warning: invalid (NULL) pointer instance
icon = gtk.status_icon_new_from_icon_name('fusion-icon')
/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py:207: Warning: g_signal_connect_data: assertion `G_TYPE_CHECK_INSTANCE (instance)' failed
icon = gtk.status_icon_new_from_icon_name('fusion-icon')
/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py:207: GtkWarning: Screen for GtkWindow not set; you must always set
a screen for a GtkWindow before using the window
icon = gtk.status_icon_new_from_icon_name('fusion-icon')
/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py:207: GtkWarning: gdk_screen_get_default_colormap: assertion `GDK_IS_SCREEN (screen)' failed
icon = gtk.status_icon_new_from_icon_name('fusion-icon')
/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py:207: GtkWarning: gdk_colormap_get_visual: assertion `GDK_IS_COLORMAP (colormap)' failed
icon = gtk.status_icon_new_from_icon_name('fusion-icon')
/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py:207: GtkWarning: gdk_screen_get_root_window: assertion `GDK_IS_SCREEN (screen)' failed
icon = gtk.status_icon_new_from_icon_name('fusion-icon')
/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py:207: GtkWarning: gdk_window_new: assertion `GDK_IS_WINDOW (parent)' failed
icon = gtk.status_icon_new_from_icon_name('fusion-icon')
/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py:207: GtkWarning: gdk_screen_get_display: assertion `GDK_IS_SCREEN (screen)' failed
icon = gtk.status_icon_new_from_icon_name('fusion-icon')
/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py:207: GtkWarning: gdk_display_sync: assertion `GDK_IS_DISPLAY (display)' failed
icon = gtk.status_icon_new_from_icon_name('fusion-icon')
/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py:207: GtkWarning: gdk_drawable_get_display: assertion `GDK_IS_DRAWABLE (drawable)' failed
icon = gtk.status_icon_new_from_icon_name('fusion-icon')
/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py:207: GtkWarning: gdk_x11_get_xatom_by_name_for_display: assertion `GDK_IS_DISPLAY (display)' failed
icon = gtk.status_icon_new_from_icon_name('fusion-icon')
/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py:207: GtkWarning: gdkdrawable-x11.c:878 drawable is not a pixmap or window
icon = gtk.status_icon_new_from_icon_name('fusion-icon')
/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py:207: GtkWarning: gdk_x11_display_get_xdisplay: assertion `GDK_IS_DISPLAY (display)' failed
icon = gtk.status_icon_new_from_icon_name('fusion-icon')
Segmentation fault
I also tried launching it with dbus but got the same problem.
I see that I'm missing the texture_from_pixmap but I'm not sure how to fix that. Help?

Martycz wrote:
Adobe need to fix that.
Along with all the other problems in this world that are all Adobe's fault.
OK so this all went pear shaped after updating Windows to 8.1? Have a look at Preferences > Performance and see if Graphics acceleration is still checked. Or it might even be greyed out. Apparently the 8.1 installer arbitarily installs a generic graphics card driver, so you might find that your drive is not so up to date as it used to be.
You know that you need to update it from the card maker's site?

Wierd Problem with Logitec mouse

I doubt this is board related but then again what do I know
I have a logitec MX 510 optical mouse. Driver version 980.
I get the wierdest audio feedback when browsing the internet. My mouse squeaks when I scroll pages. I am also getting sound feedback from my hard drive and fans but it's comming through my speakers/head phones. I did a clean install and tried "all two" of the different versions of the Logitec drivers for this mouse.
I still here the squeek even with the volume shut down completely.
The only thing I havent tried is using different chipset and audio drivers from Nvidia. I am using the current ones from there website. I don't think it's a sound driver problem though due to the squeeks and noises being audible with the volume turned all the way down.
I personally think it could be a USB problem or board problem. Maybe even a mouse problem..
Seems like a wierd power feedback problem or something to me.
I'm going to keep working on it.
I came here because you guys always seem to have some good suggestions and are willing to help. I will not get my feelings hurt if you don't have any ideas for this problem. I know it's wierd...
Although if you did, I would really appreciate any of you input.
Thx again

I have the same problem, but using different equipment. K7N2 Delta-L and a no-name Optical mouse. I get the noise/squeek upon moving the mouse. It's not loud, but it is there.
It has to do with the optics of the mouse, because if you lift it off the mouse pad = no noise. If it is staionary = no noise. If you move it when all other functions are silent, then the feedback. I have tried both the NVIDA and the REALTEK audio drivers, same problem. My next test will be a different mouse.
Any one else hear this noise?

Problem with vmware fusion 3.1.3 after upgrade to Lion

Greetings,
I have some problems with my vmware fusion 3.1.1 after my update to OS X v10.7.
i used a MacBook pro 17'' half a year old.
I used VMWare Fusion 3.1.3 and bootcamp to. I have make no backup bevore i upgrade.
The path of my virtual machine couldn't be found and so the virtual maschine didn't start after this upgrade.
I hope that i musn't reinstall my virtual Windows 7 machine.
I'am searching for a resulution and found this:
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=display KC&externalId=1003483
Cannot open the disk '/Users/<User Name>/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/dev/disk0s3/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on.
But i would save the virtual machine bevor i reinstall VMWare Fusion 3.1.3.
Have anyone a idea how i found my virtual machine.
Greetings from Germany
Kim

According to: http://roaringapps.com/app:61 Version 3.1.3 has issues with Lion. There is a 2011 beta that works better.

I am having a problem with Windows Fusion installed on a MacBook.

I am having a problem with Windows Fusion installed on a MacBook OS 10. When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
Any help would be greatly appreciated.
Thank you very much.

HartEJ wrote:
...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. Any ideas?

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?

When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

Problem with a fusion of two companies

Hi,
Maybe somebody can help me with my problem with implementing FICO modules in two companies which are soon going to become one company. The fusion will probably take place on 1st january, but it can be posponed as well.
Everything is prepared to run the common mont-end closing procedures and common planning/budgeting for both companies from the 1st january.
However, there is a great risk, that the fusion will be delayed.
In that case I suppose it would be better to enter one separate budget for the leading company and upload the budget of the other company after the fusion takes place. These actions have influence on calculating the manufacturing cost of products. It will certainly be different before and after the fusion.
Maybe you can advise me on this subject, wheter I should make a common budget for both companies no matter the date of fusion or make a buget in SAP only for the leading company and upload the budget of the other company after the fusion, and then recalculate the manufacturing cost of products.
Best wishes,
karol

Hi,
As of now the time frame is more than 7 months to the go live date of Jan 01st 2008. Definitely, you would have drawn up a project plan for executing this project.
In my view if the project is on schedule, at this point of time we can still consider making a consolidated budget after fusion. And the project schedule should be monitored closely as the deadline is coming closer. However, if by Oct 01st 2007 the project is not on schedule and there is a likelihood of delay / postponement, the second option of having a separate budget for each company code can be considered.
A contingency / back up should be prepared and this should be implemented if the original plan is not working out.
Thanks
Murali.

Problem with Compiz Fusion 0.5.2 Internal Server Error

I trying compiz fusion 0.5.2 version, but I have this error:
$ sudo pacman -Sy compiz-fusion
:: Synchronizing package databases...
current is up to date
extra is up to date
community is up to date
compiz-fusion is up to date
:: group compiz-fusion:
ccsm compiz-bcop compiz-fusion-plugins-extra compiz-fusion-plugins-main compiz-fusion-plugins-unsupported
compizconfig-python emerald emerald-themes libcompizconfig
:: Install whole content? [Y/n]
resolving dependencies... done.
looking for inter-conflicts...
:: compiz conflicts with compiz-git. Remove compiz-git? [Y/n]
done.
Remove: compiz-git
Targets: compiz-0.5.2-1 libcompizconfig-0.5.2-1 compizconfig-python-0.5.2-1 ccsm-0.5.2-1 compiz-bcop-0.5.2-1
compiz-fusion-plugins-main-0.5.2-1 compiz-fusion-plugins-extra-0.5.2-1
compiz-fusion-plugins-unsupported-0.5.2-1 beryl-core-0.2.1-1 emerald-0.2.1-1 emerald-themes-0.2.1-1
Total Package Size: 6.19 MB
Total Installed Size: 13.91 MB
Proceed with installation? [Y/n]
:: Retrieving packages from compiz-fusion...
error: failed retrieving file 'compiz-fusion-plugins-main-0.5.2-1-i686.pkg.tar.gz' from arch.nesl247.org : Internal Server Error
error: failed retrieving file 'compiz-fusion-plugins-extra-0.5.2-1-i686.pkg.tar.gz' from arch.nesl247.org : Internal Server Error
error: failed retrieving file 'compiz-fusion-plugins-unsupported-0.5.2-1-i686.pkg.tar.gz' from arch.nesl247.org : Internal Server Error
warning: failed to retrieve some files from compiz-fusion
error: failed to commit transaction (unexpected error)
What's the problem with this three packages?.
Best regards.

You can install the packages from AUR too (you will need to compile them).
Ive compiled the packlages with GNOME support and athlon optimizations and puted on my ftp:
http://download.tuxfamily.org/oproj/compizfusion/

Has anyone had any problems with fusion drive? If so, what kind of problems, and were they easily corrected?

I'm looking at buying a new computer. Has anyone had any problems with fusion drive on iMac? If so, what kind of problems, and were they easily corrected?

NOPE!
I better not! My iMac is only a week old. And, if I did have any problems with it, I would let Apple deal w/it! I do not troubleshoot when I'm under warranty. That's Apple job!

Any problems with apple fusion drives?

I am in the process of ordering new iMacs with fusion drives. someone mentioned that could cause problems with Adobe Photoshop.

This might help, but that was 2012
Mac Fusion Drive: pro users beware | ZDNet
2014:
http://forums.macrumors.com/showthread.php?t=1711254
Gene

Problems with Cold Fusion Forms

Hey Everybody -
Pretty new to these forums and cold fusion in general. I
created a number of forms in cold fusion for a school. They sign up
for classes and when they fill out ALL text fields they
successfully submit the form and they see a success page. Sounds
great right? well kind of.
If a user doesnt fill out the entire form, and submits it
gives them an error with coldfusion errors. So I am faced with a
few choices. I can either: have the form forward them to an error
page instead of the coldfusion error, or if there's a way I can
fill in the null values so that there isnt a problem with nulls. I
want to have validation but I want it in a seperate page since I
dont have the room to add errors in the form itself.
Any help would be great. Thanks in advance.

I always do ALL my form validations with a client-side JS
**and** with server-side CF.
I don't use <cfform>, I know <cfform> is
dependant on the java version the user has installed on their end.
I know I came across quite a few issues where on one machine the
<cfform> worked fine, and on another it konked out.
Anways, this is one of my most basic forms:
=============================================
PAGE1.cfm
<html>
<head>
<script>
function validate() {
var IA = document.ContactUs;
var errorMSG = "";
if(IA.FullName.value == "") {errorMSG += "Full Name\n";}
if(IA.Email.value == "") {errorMSG += "Email\n";}
if(errorMSG != "") {
alert("The following fields are required:\n\n" + errorMSG);
return false;
</script>
</head>
<body>
<form name="ContactUs" action="page1_x.cfm" method="post"
onSubmit="return validate();">
<table>
<tr>
<td align="right">Name: </td>
<td align="left"><input type="text" name="FullName"
maxlength="50" size="25"></td>
</tr>
<tr>
<td align="right">Email Address: </td>
<td align="left"><input type="text" name="Email"
maxlength="50" size="25"></td>
</tr>
<tr>
<td align="right">Comments: </td>
<td align="left"><textarea name="Comments"
cols="20" rows="5" id="comments"></textarea></td>
</tr>
<tr>
<td colspan="2">
<input type="submit" name="SubmitContact"
value="Submit">
<input type="reset" name="Reset" value="Reset">
</td>
</tr>
</table>
</form>
</body>
</html>
=============================================
=============================================
page1_x.cfm
<cfif isdefined("FORM.SubmitContact") and FORM.FullName
NEQ "" and FORM.Email NEQ "">

<cfelse>

<cflocation url="page1.cfm?status=1" addtoken="no">
</cfif>
=============================================
Now, there is sooooo much more you can here for a full blown
error-proof script. You can also check if the e-mail is a valid
e-mail (server side), and if the field is a numeric field (like zip
code, phone number, etc) then check if that field is valid, etc.
This is just a run-of-mill simple form and validation
submission using both client-side JS and server-side code.

Logitech Quickcam Fusion

Hi, I'm new to the boards. I just bought the Logitech quickcam Fusion (new uvc compliant). I have a new mac pro running 10.4.10. I tried using ichat but it would not recognize the microphone on the camera. Only have options for line in and digital in. Frustrated, I plugged the camera into my Powerbook G4 (running 10.4.9) and it worked perfectly with ichat. Any ideas on why Mac Pro won't recognize the mic? Kind of frustrating since this is the cam Apple sells on the store. Thanks in advance!

This is crap ... they should patch 10.4.10 to fix the microphone problem ... I have a quickcam ultra vision and the mic of course does not work since upgrading the OS.
I hav eto use my headset for it to work. Its bad enough that apple does not work with Logitech on the drivers since canceling the production on the iSight .... but to not patch a major USB bug is simply unforgivable.
In general I have loved my switch to Mac from PC over the past year ... but this is the kind of issue I feared would haunt my decision.
D

Help using mic on Quickcam Fusion

Hello All,
I'm trying to figure out if there's any way I can get the microphone to work on a Logitech Quickcam Fusion. I'm successfully using the camera with iChat by way of iChatUSB and an IOXperts beta driver. The IOXperts driver does allow me to access most of the settings and adjustments on the camera but iChat just doesn't recognize that the camera has a mic. I tried to get help from the guy at IOXperts, but he has a bit of an attitude problem when answering questions (or ignoring them as is most usually the case). In one message he stated that the camera declares itself as 'audio class compliant'. But what that means to me and how I'm supposed to get it to be recognized is a mystery.
If anyone has any suggestions, I would greatly appreciate it. And, yes, I'm aware that OS 10.4.9 adds USB camera functionality, but this version of the Fusion is not one that it supports, unfortunately.
Thanks,
Chris

Hi Chris,
It seems that the Fusion is one of those that can be OS 10.4.9 (USB Video Classs) compliant or not depending on serial number.
See here http://en.wikipedia.org/wiki/Listof_USB_video_classdevices
Now this would mean that it may work if the iChatUSBCam utility is disabled.
This also means deleting com.apple.ichat.plist as this stores the Camera/Utility info.
The same is true of the ioxperts drivers
5:10 PM Wednesday; May 30, 2007

Problem with Logitec QuickCam Fusion...

Similar Messages

Maybe you are looking for