Problem with loop previews...

When I click on a loop in the browser, usually nothing happens. Sometimes I get to pre-listen, but 9 times out of 10, zilch. And unless it is one of that minority of loops I can pre-listen to, GB won't let me drag it to empty space in the timeline: if it's an audio loop I can drag it to an audio track, but if it's a MIDI loop I can't do anything with it.
My loops are all perfectly ok in Logic. I just fired up GB for the first time in about a year, remembering how I liked the creative workflow using it as a sketchpad, and this has happened. I should point out that it's the first time I've launched GB since I installed 10.5.
Has anyone encountered anything similar?

Oliver,
Have you tried opening a different song, & then checking to see if the loop browser is active? Or if that doesn't help, trying a different user account?
KableTree

Similar Messages

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

I had a problem with print preview of billing document.

HI all,
I had a problem with print preview of billing document which contains two output types ZR1 ZR2..
For the footer text of billing document I maintained the font size as 7,5 pts, But when i go for print preview from output type ZR1 the font size of footer text is very small and looks good for output type ZR2.
If i change the print options-->logical destination of output type ZR1 same as Output type ZR2, the footer text looks good.
I think there is some issue with logical destination in print options for the output type ZR1, how can i resolve it.

hi,
for both the output types , r u using same sapscript or smartform?
if yes then, u can control it in output options of smartform and also in sapscript , you can control through if condition.
and if differect sapscript or smartform then you should not get such problem.
you can check the sapscript or smartfrom in TNAPR table.

Problems with Apple Preview filled forms and compatibility with Windows?

Anyone else having problems with Apple Preview filled out forms and compatibility with Microsoft Windows after Lion?
I've had it happen recently with two different people, where the data I had entered on a fillable PDF form could not be seen by Microsoft Windows, but I saw my data just fine.
I don't know what version of Adobe Acrobat they were running.
Thanks,
kt

You will get that first message when the document has been changed in a way that invalidates the internal digital signature that's applied when a document is Reader-enabled. Certain changes are allowed (e.g., filling fields, commenting, signing) and will not invalidate the signature, but others are not. The exact cause of the change is often hard to track down, but it can be due to font problems, some type of file corruption, or something that Acrobat/Reader attempts to correct when the file is opened/saved. You will also get the message if the users system time is not correct and is currently set to some time before the document was Reader-enabled. It seems best to use the most recent version of Acrobat to enabled the documents and recent versions of Reader to work with them.
It problem is probably not related to the user using anything in the Sign pane.

Problems with Print Preview in PO.

Hi Experts, I need your help!!
I have problems with print preview in purchase order, if the PO has moviments ( GR or Invoice ) I cant see the form of PO in Print Preview...Anybody has idea about happen?
I can see the form before i make the movements after i cant see anymore..This is right?
There is the document explain the problem
[http://www.easy-share.com/1903543233/PO_PROBLEM1.doc]
Thanks

Hi,
What is the particular error message which prevented you from print preview? I have not seen such case before in many systems.
Cheers,
HT

Printing Problem with Quicken & Preview

I recently tried to print a Report in Quicken 2003. It just spit out 2 blank pages. I went back to print window and clicked on Preview and the Report shows but just spits out 2 pages. I went back to print window and did a Print as PDF and saved the file the desktop.
Opened the PDF with Preview and tried to print - it just spit out 2 blank pages again. Finally opened the PDF with Adobe and it printed fine.
I've had prior problems with Preview just spitting out blank pages.
I'm using an HP 6110 that in all other applications prints just fine.
Any idea why Quicken and Preview just spit out blank pages?
Thanks,
Doug

No resolution on this

Problems with video previews: image freezes when scrubbing (CS6)

I just installed CS6 on my computer after working with CS5.5 and I encountered a strange problem with my EOS5D Mk 2 and also Ixus 100IS footage in Bridge CS6 (actually this happens with every video).
In CS5.5 I was able to preview my mov files and scrub through them without many problems (aside from a casual crash, but hey... )
In CS6 now the video preview starts and everything seems fine, until I scrub to a later point in the video. At that point the video freezes but the sound goes on. The only way to make the video run again is to click pause and then click play again. You can imagine that scrubbing through videos isn't much fun..
Has anyone ever had a problem like that with CS6?
Since CS5.5 is still installed, I checked and found out, that in Bridge CS5.5 everything is still working fine: No video freezes there - only in CS6
I already updated to the latest graphics card driver and all updates from CS6. Does anyone have an idea what I could do?
some stats about my computer:
win7 64bit
nvidia geforce GTX 590, driver 301.42
no other video software installed
Aside from that, I also realized that video quality in the preview area isn't particularly brilliant (neither in CS5.5 nor in CS6). Since the video is scaled to the preview window size, I sometimes get scaling artefacts/moirees. Is there a way to smooth the video playback, like you could in a regular video player?

Perhaps your understanding of rendering is different than mine. I think of it more as combining edits to form a new video. Are you using rendering as the same as playback? Also, not sure how you can have a system that has only CS6 files, as files are the same for CS5.5. I must be missing something here.
Manniac described the error well "In CS6 now the video preview starts and everything seems fine, until I scrub to a later point in the video. At that point the video freezes but the sound goes on. The only way to make the video run again is to click pause and then click play again".
Believe that error is fixed as my video play OK now.

Problem with looping logic

Hello all,
Ok reposted using code tags, sorry about that.
I'm trying to write some code to take in a 2D int array, loop through the array to identify where certain blocks of numbers begin and record that location so that I an jump straight to it at a later time. The number blocks go up iteratively from a point from 0 to 9 and are surrounded by nodata values(-9999).
The problem is that when I print out the numbers they are only being recognised up to 6 (7th number) and when I check the locations against the original text file they dont match. I think it's just a problem with my logic but I'm not sure why.
The text file is converted to ints and placed in an array from a buffered file reader in a seperate class. I can put this up if needed.
Any help would be much appreciated.
Thanks.
Duncan
* Class imports text file which contains a collection of values, either nodata(-9999) or a location
* represented by numbers moving away from a point; 0 closest then 1, then 2 etc.
* records the first location of each number to avoid having to loop through the whole file each time.
* i.e. can later jump straight to the first recorded location of each number.
* In current text file there are 10 numbers(0 - 9) but for some reason it stops finding them after
* 6(seventh no.) and having checked the location values against the original text file these are wrong
* by a fair way as well.
import java.io.*;
//import java.awt.*;
//import java.awt.event.*;
public class Hydrograph {
     int width = 0;
     int height = 0;
     int dZeroC, dZeroD = 0;
     int dOneC, dOneD = 0;
     int dTwoC, dTwoD = 0;
     int dThreeC, dThreeD = 0;
     int dFourC, dFourD = 0;
     int dFiveC, dFiveD = 0;
     int dSixC, dSixD = 0;
     int dSevenC, dSevenD = 0;
     int dEightC, dEightD = 0;
     int dNineC, dNineD = 0;
     public Hydrograph() {
          /* Ignore this bit it's being used for something else
          //File file = new File("c:/Users/Duncan/Documents/MODULES/MSc Dissertation/Code/A1.txt");
          //File file = new File("M:/java/code/A1.txt");
          ArrayRead ar = null;
          ar = new ArrayRead(file);
          int rows = ar.getRows();
          int columns = ar.getColumns();
          int steps = ar.getSteps();
          int[][][] threeDIntArray = ar.getThreeDIntArray();
          // Creates a new instance of delay class which takes in a text file and converts
          // it to int form, placing it into a 2D int array.
          Delay dLay = null;
          dLay = new Delay();
          width = dLay.getWidth();
          height = dLay.getHeight();
          int[][] twoDDelayFile = dLay.getTwoDintArray();
          int delayCount = 0;
          // Loops through 2D int array to identify when number first equals 0, then passes
          // the height and width values to storeDelayPos method below. Then finds for 1, 2
          // 3, 4,...etc by adding 1 to delayCount.
          System.out.println(" ");
          for (int a=0; a<width; a++) {
               for (int b=0; b<height; b++) {
                    if (twoDDelayFile[a] == delayCount) {
                         int c, d = 0;
                         c = a;
                         d = b;
                         storeDelayPos(c, d, delayCount);
                         System.out.println(delayCount);
                         delayCount++;
                         break;
               //System.out.println(" ");
          System.out.println(" ");
          System.out.print(dZeroC + " " + dZeroD);
          System.out.println(" ");
          System.out.print(dOneC + " " + dOneD);
          System.out.println(" ");
          System.out.print(dTwoC + " " + dTwoD);
          System.out.println(" ");
          System.out.print(dThreeC + " " + dThreeD);
          System.out.println(" ");
          System.out.print(dFourC + " " + dFourD);
          System.out.println(" ");
          System.out.print(dFiveC + " " + dFiveD);
          System.out.println(" ");
          System.out.print(dSixC + " " + dSixD);
          System.out.println(" ");
          System.out.print(dSevenC + " " + dSevenD);
     // Takes in width, height and delayCount value and sets variables according to
     // the value of delayCount.
     void storeDelayPos (int setC, int setD, int setDCount) {
          int dCount = 0;
          dCount = setDCount;
          switch(dCount) {
               case 0:
                    dZeroC = setC;
                    dZeroD = setD;
                    break;
               case 1:
                    dOneC = setC;
                    dOneD = setD;
                    break;
               case 2:
                    dTwoC = setC;
                    dTwoD = setD;
                    break;
               case 3:
                    dThreeC = setC;
                    dThreeD = setD;
                    break;
               case 4:
                    dFourC = setC;
                    dFourD = setD;
                    break;
               case 5:
                    dFiveC = setC;
                    dFiveD = setD;
                    break;
               case 6:
                    dSixC = setC;
                    dSixD = setD;
                    break;
               case 7:
                    dSevenC = setC;
                    dSevenD = setD;
                    break;
               case 8:
                    dEightC = setC;
                    dEightD = setD;
                    break;
               case 9:
                    dNineC = setC;
                    dNineD = setD;
                    break;
               default:
                    System.out.println("OUT OF BOUNDS");
                    break;
     public static void main (String args[]) {
     new Hydrograph();

Hi,
I am working on a hydrograph program in java as well... I am trying to represent rainfall data. Do you think that you could share some of the code that you came up with, so that I don't have to go through the whole process.
thank you so much,
Kevin

Problem with page preview : transodification of ':' and '/'

Hello
we got a problem with page and iview preview on production system (7.01).
The preview fail with a simple message "Erreur d'exécution portail / Exception lors du traitement de la requête, envoyez l'ID de l'exception à votre administrateur du portail" ("Portal execution error / exception during request treatment, send exception Id to your portal administrator").
The user possess full admin role, as weel as autorisations onto the page. He can use the page when it's in the menu, but visualizing the page via preview fail.
after comparing the preview URL from production system against the preview URL from development, we spotted a difference :
on the dev portal, the URL is
http://portal:port/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!3aportal_content!2fcom.company.directory.SpecificApp!2fcom.company.directory.LeaveRequest!2fcom.company.directory.Employee!2fcom.company.page.MyRequests?sap-config-mode=true
on the production portal, the preview URL is
https://portal/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!253aportal_content!252fcom.company.directory.SpecificApp$!252fcom.company.directory.LeaveRequest!252fcom.company.directory.Employee!252fcom.company.page.MyRequests?sap-config-mode=true
As you can see, the ":" are transcoded into !3a on dev, and !253a on prod (and the "/" are respectively transcoded into !2f and !252f)
the other difference is the use of an alias (http://portalprod/irj against http://portal:port/irj), and the use of a secured connexion (https).
does someone know where this problem could come from ?
regards,
Guillaume

Hi Guillaume,
Could it be possible that there would be a SAP Web Dispatcher on the Production Portal and not on the dev portal.
You should use a tool like HTTPWATCH to see if you get HTTP redirects.
Regards,
Olivier

Problems with looping mp3s without gaps

I am building an 8 track Flash audio mixer where the sounds for each track are selected by the user from a list component and then loaded into a Sound variable at runtime. This can be done while the mixer is playing or stopped, and of course, it adds a lot of flexibility for making music. All actionscript is in external .as files and sounds are looped using the SOUND_COMPLETE event.
So far, all loading/playing functions work perfect, but I`m having problems with gaps at the beginning/end of my mp3 files. I was told this was an inherent problem with mp3 files, so I tried using MPTrim to clean the silence up. I also tried starting the loop a bit late - sound.play(80, 1) - but the results are usually inaccurate and unpredictable.
When I import a wav file into the library and then export it as an mp3 file embedded in the .swf file, it sitll has a short gap. When I built a previous mixer in Flash MX (actionscript 1) there was no gap and all sounds looped perfectly! Of course, in this later case, all sounds were embedded inside movie clips on the stage and scripting was done on the timeline, so maybe that made a difference.
What is going on with AS3? I have spent long nights trying to find a solution to this, but to no avail!
I read a blog where the writer went through all the steps I have and just gave up, but I know there is a solution. I have seen this sort of thing done on Flash mixer sites before (even sites with full-on audio sequencers) so I know it can be done!
Is there anything I can do to get around this problem?
Thanks in advance,
Matt

mp3 files can have header info at the start, in addition to dead space at the start and end. if you're certain you've removed all dead space then you should be able to compensate (reliably) for header info by using the offset parameter in the play() method (after you sound's onLoad() method executes. but you wouldn't use 80: that first parameter is in seconds, not milliseconds.

Problem with RAM preview in Windows 7, AE 5.5

Hi there, I'm kind of a newbe with After Effect 5.5, have to make an animation for school and although I've already figured out how to make some magic with the program, I'm stuck on the RAM preview (yes, the one you get by hitting 0 if anyone asks). It gets stuck after 15-22 fps and that's it. I've searched forums, and comments and articles and whatsoever and the authores where having this issue when having Macs. Well, I don't, that's what I have:
64 bit Windows 7
Intel Core i7-2630QM CPU @ 2,00GHz
6,00 RAM
graphic card NVIDIA GeForce GT 540M
(any more details needed?)
I've also tried many combinations with checking/unchecking OpenGL, changing Video Preview (Computer Monitor Only or IEEE 1394 Pal <=don't even know what that is, but maybe you'll want to know), and of course Multiprocessing (image below) turning it off ond on.
Compositions in my animation are for now just jpg's, png's and some psd layers, with some scaling and small dropshadows, nothing too fancy for now so I'm even more surprised I get the "Insufficient RAM" allert. (AE is the only running program except for GoogleChrome to search for possible solutions) Of course I need to add the sound but it's pointless until I figure out the RAM preview problem.
I think that's all the details, but if you need more just ask.
Please help me guys (and try to answer in simple English), it's really getting on my nerves and my deadline is coming...

I'm not sure that I completely understand what you are saying. Depending on the amount of available ram and the size and frame rate of the composition (not in your post) you may only get 15 to 22 seconds of playback. If it's only playing back at 15 to 22 FPS then you're choking your system. The first thing to do is to try setting the resolution of our comp to half and the zoom factor to 50%.
Now that I take a close look at your screen shot, that's not going to help much. Surprise, surprise! You don't have nearly enough ram to have Render Multiple Frames Simultaneously checked.You need 4GB per processor minimum. With 8 CPU's you'll need 32 GB of ram to take advantage of all your cores for AE and you'll still need 1 of them for background apps. Take a close look at the settings:
How much ram is allocated for background apps? 1GB, How many CPU's will be used for the background apps like writing to disk and reading from disk, which are necessary for ram preview? 0, zero, nada. That's not exactly accurate or your system wouldn't run at all, but it shows the problem clearly. You've manually choked your fairly powerful computer by tying upp it's resources in a manner that causes it to choke on memory and read write cycles. Even with 6GB of ram you've starved the system to death.
You've also allocated all of your ram to AE. Don't do that. Leave at least 1 GB for other apps, 2 would be better.
Redo the settings and AE should work just fine. BTW, this info is clearly stated in the ram and memory allocation help pages for AE.

Problem with the preview window in Premiere Elements 10

Hi guys,
I have a question:
I have a new PC (data follow) and Adobe Premiere Elements 10.
My problem is that I see in the preview-window only one grey picture. The sound runs without problems! In other chats I red, that perhaps my graphic card is the reson of my problam. Is this thus? If so, how I can repair this?
PC:
AMD FX-8350 Eight Core Processor 4 GHrz
NVIDIA GeForce GTX 750 Ti
Do you need even more?
What I have already tried:
- Adobe Premiere Elements 10 anew inst.
- Graphics drivers update
- Check DirectX
- Windows Media Player and QuickTimePlayer anew Inst.
Already to many thanks for your help!!!!!
lg
Börni

borni123
What computer operating system is your Premiere Elements 10 to run on?
You are involved in the Premiere Elements 10/NVIDIA GeForce issue whose full details (description and fix) are included
in the Announcement at the top of this forum. Copy for your convenience below.
You gave a lot of details but did not include the computer operating system. This information may be the key whether
the known fix will work for you. The known fix requires roll back of the driver version to about May 2013. If your computer
is Windows 8 or 8.1 64 bit, there may not be a driver old enough to resolve the issue. This may force you consider
a Premiere Elements version other than 10 or a different video card/graphics card for your computer. This issue is
specific for Premiere Elements 10 and the NVIDIA GeForce cards.
Copy of Announcement at top of this forum....
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this
applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary
to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working
Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is
expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver
roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
The following is the specific link in the above for determining what older NVIDIA GeForce GTX750Ti driver versions are
available to you.
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
Please update us on your progress,
Thank you.
ATR

Smartforms - problems with output preview when vedor has different languag

Hi all,
The output preview does not work when vendor has different communication language then english?
Exact description of the problem described by the functional people:
"For the Latin America countries that use the SMARTFORM today, we have noticed that if the vendor has communication language English, the PO is displayed fine in the Output preview in iShop. However, if the vendor has communication language e.g. ES maintained in the vendor the output preview fails. We would like to have it so that even if the the vendor has a different communication language than EN maintained on the vendor the PO should be able to be displayed in the output preview of the SRM system."
So has enyone encountered this problem before? All help is appriciated!
Thanks in advance!
/Armin

Well the problem was that the language pack with Sapnish language was not installed.
Thanks for the answer 2p 2u!

Problem with Print Preview and Print events

Hello Experts,
We have developed a program, in which, I m trying to display the % values in the Sub Totals and Grand Total lines, The logic and program functionality is performing very well. The report is displaying the output the way end user is willing to see.
The main problem is, the entire % values are going to a toss when we click the Print Preview or trying to print the report, which is not supposed to go that way. I have even tried to debug the program where the problem is evolving in the code, but it is not raised from the code.
Please refer to the screen shots.Before clicking the Print Preview and after clicking the print preview.
Do anybody face the same kind of problem ever?
If so please let me know what could be the best possible solution.
Thanks & Regards
Harish Kumar MK

Hi Harish,
I have use the below code but not for percentage... I think for percentage you just have to calculate the normal percentage and replace it with a subtotal value.
This is not your complete code it will be better if you mail your complete code so that i can debug and check.
   TABLES: vbak.
TYPE-POOLS: slis.                      " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg,              " Sales organization
s_kunnr FOR vbak-kunnr,              " Sold-to party
s_vbeln FOR vbak-vbeln.              " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
    vkorg LIKE vbak-vkorg,             " Sales organization
    kunnr LIKE vbak-kunnr,             " Sold-to party
    vbeln LIKE vbak-vbeln,             " Sales document
    netwr LIKE vbak-netwr,             " Net Value of the Sales Order
    waerk LIKE vbak-waerk,             " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
*      Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
           FROM vbak
             UP TO p_max ROWS
          WHERE kunnr IN s_kunnr
            AND vbeln IN s_vbeln
            AND vkorg IN s_vkorg.
ENDFORM.                               " F_READ_DATA
*      Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
    add 1 to ls_fieldcat-col_pos.
    ls_fieldcat-fieldname   = &1.
    ls_fieldcat-ref_tabname = 'VBAK'.
    ls_fieldcat-do_sum      = &2.
    ls_fieldcat-cfieldname = &3.
    append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
    add 1 to ls_sort-spos.
    ls_sort-fieldname = &1.
    ls_sort-up        = 'X'.
    ls_sort-subtot    = &2.
    append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
    ls_fieldcat TYPE slis_fieldcat_alv,
    lt_fieldcat TYPE slis_t_fieldcat_alv,
    lt_sort     TYPE slis_t_sortinfo_alv,
    ls_sort     TYPE slis_sortinfo_alv,
    ls_layout   TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'.                  " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'.                  " Sort by kunnr and subtotal
m_sort 'VBELN' ''.                   " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      is_layout   = ls_layout
      it_fieldcat = lt_fieldcat
      it_sort     = lt_sort
    TABLES
      t_outtab    = gt_vbak.
ENDFORM.                               " F_DISPLAY_DATA
BR
Sumeet

Problem with print preview in alv grid

Hello all,
I have to display base unit of measure(meins) in alv grid output. i am using a conversion routine to convert it from ST TO PC before display.After executing the report i am getting the correct data. the problem is when i select the print preview
alv list is displayed. in that the unit of measure pc is not displayed, it is comming as '*******. what i came to know is the same conversion routine is triggered in the standard program for the display. so it canot convert that.
so please help me out in solving this.
Thanks in advance,
Sarat

hi sarath,
this is an example code try using the statement before displaying, i think it works.
*example cdoe.
LOOP AT i_grp1 INTO wa_grp1.
AT NEW tknum.
READ TABLE i_grp1 intto wa_grp1 index sy-tabix.
SUM.
MOVE-CORRESPONDING wa_grp1 TO wa_grp2.
APPEND wa_grp2 TO i_grp2.
ENDAT.
ENDLOOP.

Problem with loop previews...

Similar Messages

Maybe you are looking for