Problem with losing signal on my nokia e72

I noticed one problem with my nokia E72.
When i put it on table and dont touch it, it has a full strong signal. But when i am holding it in my hands, it loses signal. I know, there is an antena down the phone, so maybe it is normal. But it is annoying. Can anybody tell me his (her) experiences?
Thanks a lot :-)

Since the new E72 firmware I too experience signal drops. From full signal to nothing. Takes a couple of seconds after which the phone regains signal. Anyone else experiencing the same?

Similar Messages

P1 Problem with network signal

My p1 is losing signal when is on 2G network on 3G network signal is poor, my phon with that problem is unusable

First of all, put your SIM card in another mobile and see if there is any difference in signal strength.If it works OK in a different phone, then I would suggest a software update on your phone.

Problem with Mail For Exchange over Nokia E7-00 (a...

Hi, I have a problem with my nokia E7-00 (Symbian Anna).
Until recently it worked fine with my terminal synchronization with GMAIL via Mail For Exchange.
I synchronized the mail (including folders / labels I have on my account), address book and calendar.
Suddenly, this synchronization does not work anymore, the mail is no longer recovered, the calendar does not show appointments and contacts are no longer synchronized.
Trying to send an email that works perfectly, but the mail is not saved in Sent folder on my nokia e7-00, also if I search on the remote server is a contact I found it perfectly.
In practice it seems that something in the synchronization mechanism does not work.
Do you have ideas on how to fix this problem?
Thanks in advance.
MP

You may try rebooting the device to check if it works. If this did not help, you will have to re-setup outlook account on your device to get it worked.
Hope, this can resolve your issue.

Z77-GD65, problems with video signal

Got some problem: with external graphics card (ASUS GTX660-DC2TG-2GD5) the signal disappears after a while (about 1-3 minutes) - display goes off and has floating table "No signal".
Without external card, through the integrated video - all works fine.
Has anybode had this problem?
I had a BIOS like 10.0 and then updated it to the latest version ( 10.8 ) via M-FLASH, but nothing has changed.
My system:
. MSI Z77A-GD65 (RTL) LGA1155 < Z77> 3xPCI-E+Dsub+DVI+HDMI+GbLAN+1394 SATA RAID ATX 4DDR-III
. CPU Intel Core i7-3770 BOX 3.4 ГГц / 4core / SVGA HD Graphics 4000 / 1+8Mb / 77 Wt / 5 / LGA1155
. Corsair Vengeance < CMZ8GX3M2A2133C11R> DDR-III DIMM 8Gb KIT 2*4Gb < PC3-17000>
. ASUS GTX660-DC2TG-2GD5
. Corsair TX750 < CP-9020042-EU> 750W ATX (24+2x4+4x6 / 8pin)

Yes, the forum's USB method is the safest there is. That and the reflash will ensure the ME firmware has been updated properly. Yes, you do have a safety net with the B BIOS chip.
As a side note, you shouldn't have any graphics problems when W7 is installed like some have with W8.
Edit: Problem is you need an OS installed with the forum method.
2nd edit: Recommend then to run on the onboard ports to the monitor with the discrete card removed to get the OS, drivers, reflash, etc. taken care of. Then the matter of the graphics card not working right can be addressed.
3rd edit: Has the graphics card been tested in another machine to verify it is not possibly faulty?
4th edit: Sorry about all the edits, but as I think about it, more things come to mind. Have you been connecting the discrete card with HDMI or DVI? Some compatibility issue can be a possibility with a non compliant v1.4 HDMI cable or a monitor conflict. Some Apple monitors have been known to be problematic from time to time.

Problem with losing quality in exporting FLV

First I should emphasize that I am new to Adobe's products, and am learning it on the fly as part of a intelligent tutoring system design project. So I apologize for my lack of technical knowledge in advance. Rest assured I have put much effort in attempting to solve this problem on my own and by referencing this forum and other web sources, but sadly with no success.
FYI, I am using the CS4 Master collection.
My question pertains to retaining the quality of my video once I export it to .flv format via Media Encoder from Premiere Pro. My main video source is an .flv file that i have imported into my media browser. Initially I ran into a problem with the importing because it did not recognize H264 as having any media, and so I had to convert to Sorenson format to get it to import successfully. But it seems to have imported just fine without any loss of quality in the workspace. So that isn't my main issue but perhaps it is related.
I am having major issues with losing quality upon export back to .flv format - which is the format I am required to use - the video is being imbedded within a larger program and so it needs to have a smallish file size. For the life of me I cannot figure out any combination of settings that works. If I select same as source then I end up with a video that is surrounded by black borders. This may because the workspace is larger than my imported file. I have attempted to enlarge it to fit the safe margins but it hasn't helped. If I resize my output video to 640 x 480 - which is what I want - I get a shrinked video with black borders. If I crop the input to what I want I just lose quality - but I lose quality either way. I really want to accomplish this without increasing the bit rate (and thus the file size). I have tried just about every setting available and I still lose the quality. Is this just inevitable? Is there a plugin that would help? From what I can it seems that Adobe has more problems dealing with .flv than with other video formats, but I haven't found anything that pertains to this issue specifically.
Otherwise does anyone know of any other programs that can edit .flv files and offers multiple video & audio tracks?
Thanks in advance. If anything needs clarification let me know.

Ah yes I left out that detail. My source video is 640 x 480 also so the output is not an increase in size.
This is different from my sequence settings. Which is 1440 x 1080 16:9 ratio. Pixel Aspect Ratio is HD anamorphic 1080 (1.333).
I am assuming that this needs to be changed but I can't figure out how to do that (sequence settings are greyed out). Should I just start a new project?

Problem with PWM signal, Please Help!

Hi all,
I am designing a PWM signal where its output is going to connect 4 optocouplers to drive a H-bridge MOSFETs. However, I am now having a problem of getting an output signal strong enough to drive the optocoupler.
I have attached the Multi-Sim file along with this post. Please feel free to help me to solve this problem thank you.
The version of Multi-Sim I am using is 10.0.144
Attachments:
PWM_HCPL0631.ms10 ‏72 KB

Hi Justin,
I am slightly confused as to whether this is a problem with Multisim or the design of your circuit. Are the components in Multisim behaving in an unexpected manner in comparison to their real-world counterparts?
Regards,
Thomas Clark
Applications Engineer
National Instruments UK & Ireland

Problem with e-mail-client on Nokia X6

I'm experiencing a problem with the built-in e-mail client (NOT nokia e-mail) on my Nokia X6. When I try to Connect to my Gmail-Inbox (IMAP), it begins to trigger a connection. But just when it is connected the phone disconnects and the two arrows on the tab disappear.
Does any one have the same problem? Nokia E-Mail isn't a suitable alternative for me.
Thanks in advance.
Solved!
Go to Solution.

Yes I installed it. But it doesn't supports notifications or push-e-mail. And it's just a Java Client.
But I fixed the problem: If you set the number of e-mails to fetch to another number than 50, it will not work. It really confuses me, because it worked without any problems on my 5800 XM and (in the beginning) also on my X6.
I'll report this bug to Nokia.

Problem with memory card slot on nokia c5 03

Sir,
I have a Nokia C5 03 from the last 8 months.....
Working very well.
Recently, my memory card stopped working.
I thought that there might be a problem in the memory card and bought a new one.
Even though i inserted new card in my phone, i am getting the same error.
In file manager it is displaying as "Memory card Corrupted."
I have checked the new memory card by inserting in to another phone which was working normally.
There i have even formatted the new memory card and again inserted into my c5.
Then also i am getting the same error message........
Can any one suggest me what to do in this regard??????
Thanks in ADVANCE.
Solved!
Go to Solution.

Hi,
Welcome to the forum!
Have you also tried inserting the old memory card to another phone as well? What happened after inserting it to another phone? If it's working properly with another phone, the memory card slot of the C5-03 might have an issue so you should bring it to the repair facility to have it checked.
You can search for the nearest repair facility in your area from this link: http://www.nokia.com/in-en/care-point-finder/
Hope this helps.

Problem with filling the forms in Nokia browser af...

Hello,
I updated my Nokia 808 to FP2 successfuly. But i realized one problem in web browser and the new keyboard. For example when i want to write into a form box i can only see virtual keyboard. I cannot see what i type. If you want to test this, please open your local nokia website and click on support / e mail us. You will see a form which will ask your phone model and OS etc. Try to type into the boxes. Yesterday i failed to write anything. Also reaction is very slow. You can see what i m talking about in the attachments.
Also with the new update, videos are not working correctly. Sometimes video player is crashing. Sometimes i see strange and colourful images while it is trying to play the video. Then it turns to normal and i see the video clearly.
Im satisfied with some new things in the update but there are problems and slow downs. Some features are not working such as Nokia Social. I hope Nokia Team will find a solution. Thank you.
Attachments:
Fotoğraf0001.jpg ‏183 KB
Fotoğraf0150.jpg ‏179 KB

HI ilkerol,
Welcome to Nokia Support Discussions!
Thanks for the feedback! I tested the support form with the same results, the page was slow and kept on moving up to the top when I was typing in the textbox. I tried it with a Lumia device, and even though I was able to fill the textbox without problems, the drop down menus did not work. Based on that experience, it seems that the form is meant to be used with a personal computer, not a mobile device. I will, however, escalate this issue in case there is a possibility of a quick fix.
As for the video issue, does this happen with all videos or just certain ones? Colorful images etc. usually mean that the video file encoding is somehow broken and the player cannot read it properly.
Hope this helps!
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Problem with installing Microsoft Apps on Nokia e7

Hey Guys
I have a nokia E7 with Belle update , previously I had the Microsoft apps installed on my phone and for some reasons I had to do a full format and restore of my phone. My phone restore was only SMS and contacts.
Then I tried installing the Microsoft apps again and after the installer file downloads , it ask me if it can download a 21 MB file , so I press yes and then it says " the connection was lost , canceling the installation "
I am sure my network connections are OK, all the other applications download and install perfectly and I have tried it over 3G and Wifi. To be sure I did factory reset and it did not work.
even when it creates an icon for smart installer , the same thing happens.
I have tried anything it reached my mind and did not work, do you guys have anything else that might work?

SiavashTechDaD wrote:
I have to say I did the hard reset with *#7370# , and before that I had formatted the mass memory as well, so after all that the phone was just like the first day I got it.
Have a horrid feeling that your formatting mass memory has achieved same result as "hard reset" especially if you can't access Nokia Store upon device. Nokia Care facility can re-install software completely including eMMC content which truly returns device to "Out of box" state.
Have you tried "Googling" for "Microsoft Apps 2.01 (5616)"?
You will need to install Pixi enablers first, if I remember it correctly.
Happy to have helped forum with a Support Ratio = 42.5

Problem with losing files in Dreamweaver after they have been saved.

Hello everyone,
Presently, I am a student and was working with Dreamweaver in an attempt to build my portfolio Web site. I had my root folder completed and saved my Dreamweaver file, next I and gave it a site, or designated a site, whatever it is called. I was about to load an image and I did not like the way it was coming along so I tried to back out, but it would not let me for some reason. So I decided to just close it and go back to my previously saved file. Here is what happened:
This is what is left, but no file. Please, for the love of God can someone tell me what keeps doing this. This happened last year when I was in another class and had to take an incomplete and never got to finish it because I had nothing to go by and could not remember the steps. I am so frustrated, and always happens when there is no one around to help. I am so tired of software and technology failing me. What does someone do with a paying client when this happens? In any case for anyone's information I have Dreamweaver CS6 CC and I am running it on a MacBook Pro Retina 15 inch, Early 2013 that utilizes OS X Yosemite 10.10.2. I would love to know if there is anyone else having this problem. Hope this information helps too as I am frustrated and at times second guessing whether or not this is a deal breaker in this field. Very disgusted and discouraged at the moment.
Augustine

You might try using Finder to locate the file you're attempting to open, and compare its actual location to the location of your site folder in Dreamweaver's Site Setup:
More likely than not, there's a discrepancy between where the file is, and your site folder - as configured in Dreamweaver.

Bootcamp/Vista problems with Airport signal?

Anyone know if there are issues with the Airport drivers in Vista for the Intel Minis? I've just gotten Vista up and running this evening but I am getting terrible to nonexistant wireless signal with my Mini when booted into Vista. When in 10.5.2 though I get consistently solid, usually full bars signal.
I've hunted around in the Vista settings to see if there's a card setting that perhaps needs to be changed but I've not seen anything that seems relevant. So I am suspecting a driver issue.
Anyone got other ideas?

Craig, Welcome to the discussion area!
Compare the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card to your PowerBook to ensure that you have properly installed the antenna wire. Proper installation takes more force than many people expect.

3.0.1 have a serious problem with 3G signal?

Hello. I've installed the 3.0.1 on my iPhone 3G S. My home is in an area usually covered by the 3G signal of TIM (Italy). After the update the 3G signal strenght is very low and the phone is always switching to Edge.
It's a shame. I want to put my iPhone back to the 3.0.

I was having this problem yesterday and today between Pleasanton and San Francisco. I've reverted back to 3.0 firmware (here's a link for the folks who are planning to do the same: http://appldnld.apple.com.edgesuite.net/content.info.apple.com/iPhone/061-6582.2 0090617.LlI87/iPhone2,13.0_7A341Restore.ipsw). I just hope that 3.0.1 didn't screw up radio firmware on the iPhone such that even downgrading doesn't help. I'll report tomorrow if going back to 3.0 solves this problem for me.

HT1218 Does anyone else have a constant problem with losing connection with smart phone due to airport

phones are constantly searching for internet connection My time capsule/air port is always losing internet connection----anyone know how to solve this?

Wireless interference is probably the cause.
If there are competing wireless networks in your area, there is little you can do other than to use 5 GHz with all the devices capable of it. For iOS devices, only iPads and the newest iPhone is. Macs have supported 5 GHz for many years.

Hi Anyone had problems with losing Dropbox favourites on their IPad?

Hi
Anyone had problems losing Dropbox favourites on their iPad?
I have about 400 songs (words and chords) as Word documents on Dropbox marked as Favorites on my iPad (saves carrying around sheets of paper in a binder) but for some reason the documents lose their 'favourites' tag and so cannot be accessed unless I have a Wi-Fi connection. I have 're-favoritized' them twice already which is very time consuming. I am thinking of giving up and buying a tablet.
Any ideas?

Hi Dave
Just looked at the string and I am guessing you didn't get it! Basically I was saying I was pleased you got a positive response from Dropbox. Very easy for Dropbox; very easy for Apple and Dropbox to blame each other which is not helpful to their customers.
You can of course use your songs via Dropbox providing you have access to Wi-fi at the gig but this is a bit risky if you are their to do a gig. By the way do you have the iPad holder that clips onto your mic stand? Saves taking a music stand and gives you a bit more room in the space a coffee bar or restaurant usually gives you.
Keep in touch and let me know if you make any progress. I will do the same. [email protected]
Cheers
Ian

Problem with losing signal on my nokia e72

Similar Messages

Maybe you are looking for