Problem with lowercase when saving in custom SAP table.

Hi Gurus,
I have a problem in saving entries in a custom table in SAP.
When I enter a name with combinations of upper and lower case in SE16, when saving, my entries were all converted into uppercase. That goes as well in passwords. That's my concern, how can I check passwords if combinations were disregarded?
My parameter fields for these were just type CHAR.
Is there a way I can save data as how they were entered?
Thank you in advance for your responses Gurus...

Hi,
Check the Domain of the field and select Lower case check box if it is a Zdomain or else create the new domain or check for one like this.For example..
Table PA0002 which has a field NACHN and Data element assigned to it is PAD_NACHN...double click on the Data element and now again double click on the Domain and now Under Ouput Characteristics check the Lower Case check.
And now database get's saved with what ever case you entered

Similar Messages

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

I have a problem with itunes when I sync the saved music and want to sync my iphone 5 ios 7.0.6 no longer passes the music thing is that just stays on "waiting for sync" and not worry please help are more than 400 songs that do not want to hear who are wi

Plawexki wrote:
... do you know if the contacts, photos, messages etc will be wiped?
Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
From Here > http://www.apple.com/support/iphone/syncing/
You may find this information of interest...
Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this

having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest version

May you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios

Problems with navigation when deploy application on WebLogic 10.3

Hi! I have problems with navigation when I deploy my application on Weblogic server 10.3. In my application I have two pages. One page where I can see the records. In this page I have button Create with action to secound jspx page. When I press this button then the first form (where I could see all records) is empty - the create operation worked, but navigation to second page not. Navigation rules is in adf task flow. In default server all works correct. Where is the problem?
Maybe when I deploy my application I need specialy deploy adf task flow or somewhere write something? If so, then can you explain me where? Any suggestions what to do.
Best regards!

I have in log:
2009.26.3 20:12:52 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImp
l setLifecycleContextBuilder
WARNING: ADFc: Replacing the ADF Page Lifecycle implementation with 'oracle.adfi
nternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
2009.26.3 20:12:52 oracle.adfinternal.controller.util.model.AdfmInterface initia
lize
INFO: ADFc: BindingContext is present, using ADFm APIs for DataControlFrames.
2009.26.3 20:12:52 oracle.adfinternal.controller.metadata.provider.MdsMetadataRe
sourceProvider <init>
INFO: ADFc: Controller caching of MDS metadata resources ENABLED.
2009.26.3 20:12:52 oracle.adf.controller.internal.metadata.MetadataService$Boots
trap add
INFO: ADFc: Loading bootstrap metadata from '/WEB-INF/adfc-config.xml'.
2009.26.3 20:12:54 oracle.adf.share.security.providers.jps.CSFCredentialStore fe
tchCredential
WARNING: Unable to locate the credential for key AUGI in D:\bea\user_projects\do
mains\base_domain\config\oracle.
2009.26.3 20:12:54 oracle.adf.share.jndi.ReferenceStoreHelper throwPartialResult
Exception
WARNING: Incomplete connection information
Edited by: Debuger on Mar 26, 2009 11:18 AM

When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen. I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS. I'm usi

When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen. I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS. I'm using a Mac with Mountain Lion OS. Any solutions?

Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
LN

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?

Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

I have a problem with Safari: when it opens and I go on google, it opens a page that says: PLEASE UPDATE INTERNET EXPLORERE. What should I do?

I have a problem with Safari: when it opens and I go on google, it opens a page that says: please update internet explorer!
What should I do?

It's a scam. Have a look at this thread:
https://discussions.apple.com/thread/6058094?tstart=0

Problem with SDO_relate when using polygons with holes.

I'm having a problem with sdo_relate. I'm trying to extract all elements from a point table (bdtq_batim_p) that are inside a specific polygon from another table (SDA_MUNIC_SS). The spatial index for both table have been rebuilt and the data from both table is valid.
When I do a count on the query, I know the answer should be 1422 elements (Counted in ArcGIS). However, sdo_relate gives a smaller number of elements in the result set.
The query :
SELECT count(distinct t.identifiant) FROM bdtq_batim_p t, SDA_MUNIC_SS s WHERE s.mus_co_geo = '48015' and sdo_relate( t.SHAPE,s.SHAPE,'mask=anyinteract querytype=window') = 'TRUE'
returns 282 elements. The query with mask=inside, SDO_Anyinteract() and SDO_inside() all give the same result.
I did a test with the following query and the result is 1422 (which is the good result).
SELECT count(distinct t.identifiant) FROM bdtq_batim_p t, SDA_MUNIC_SS s WHERE s.mus_co_geo = '48015' and SDO_WITHIN_DISTANCE( t.SHAPE,s.SHAPE,'distance=0') = 'TRUE';
It's important to note that the polygone (from SDA_MUNIC_SS) that is used for this query have holes in it. I have the same problem with all the polygons from the SDA_MUNIC_SS table that have holes in it. For the polygon without holes, the results are the same for the 2 queries.
My question are :
Why are the result from the two queries different? A query with a buffer of 0 should always return the same result as a query with Anyinteract.
Is there a known problem with SDO_RELATE when using a polygon with holes in it?
Do you have any idea how to solve my problem.

Since i don't have much control on the version of Oracle and Patches that we use in the system, we used a workaround that detects the polygons with holes and uses the SDO_WITHIN_DISTANCE( t.SHAPE,s.SHAPE,'distance=0') = 'TRUE' operator in those case. We saw a slight decline in performance but it now returns the right results. When the system will be patched, we'll come back to the original version and see if the problem is solved.

I have a problem with IDVD when I have completed a movie and set it up with menus etc I cannot operate the burn button so I cannot make a DVD.

I have a problem with IDVD when I have completed a movie and set it up with menus etc I cannot operate the burn button so I cannot make a DVD.

Hi
Can You
Go up to File Menu in iDVD - and here down to
Save as a DiskImage
If this works - You can burn Your DVD in another way via Disk Util tool
Yours Bengt W

Strange problem with SQLPLUS when client and server on the same box

Hi,
I have the problem with SQLPLUS when clinet and server on the same machine.
With client and server on the same machine i am running the command
sqlplus -l username/password@connect_identifier as SYSDBA.
With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
How to get rid of this behaviour. Is there any way to do this.
I am running this command by creating a process in C#
Edited by: user11000236 on Jun 16, 2009 10:31 AM

user11000236 wrote:
Thanks for the info.
How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
This is explainted in the above mentioned link:
Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication.

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

HT1338 Problem with MAIL, when select names that start with "E" the mail freeze. Can't fix it.

Problem with MAIL, when select names that start with "E" the mail freeze. Can't fix it.

Now I checked the materials that I got from AT&T Yahoo and
port 25 is used as the outgoing mail port, 110 for incoming.
This is for the POP type account provided by AT&T, not necessarily for an email account and SMTP server not provided by AT&T.
Sounds like AT&T blocks using an SMTP server that is outside of their network or not provided by AT&T on Port 25.
Try the following first.
Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings button below for the .Mac SMTP server.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
If this doesn't work, we will go to plan B.

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

I have problems with Gmail when I open it in Firefox. The button "write a letter" doesn't work

Dear Firefox team,
I have problems with Gmail when I open it in Firefox. The button "write a letter" doesn't work. On the page it is seen as if the page is being downloaded but in fact not. As a result, I can't neither write new letters no reply to received mail.
Best regards,
Alla Khv

-> If images are missing then check that you aren't blocking images from some domains. See:
http://kb.mozillazine.org/Images_or_animations_do_not_load
-> Check the permissions for the domain in the current tab in Tools > Page Info > Permissions
-> Check that images are enabled: Tools > Options > Content: [X] Load images automatically
-> Check the exceptions in Tools > Options > Content: Load Images > Exceptions
-> Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images)
-> There are also extensions (Tools > Add-ons > Extensions) that can block images.
Troubleshooting extensions and themes
https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Problem with lowercase when saving in custom SAP table.

Similar Messages

Maybe you are looking for