Problem with m1319f mfp on WIndows 7 and Server 2008

Hi there,
I just bought a m1319f mfp.
Plugged it in an old D-Link dp-300u print server.
The printer work fine on Windows XP.
Not working on Windows 7 and Windows server 2008.
I configured the port as in XP (adress, lp, queue name) and when i print from 7 or server 2008, there is a message on the printer saying "printing document". It stays there for a couple of minutes but no printing. No stuck document on the computer printing queue.
Every time i install the printer from 7 or server 2008, the print server have to be restarted (lights flashing).
The print server seems to fail when i'm on the Windows printer searching part (windows trying to find the printer when adding a new printer).
Maybe the dp-300u is too old?
I have another printer on it (LPT this time) and its working fine. Brother MFC7220 it is.
ANy idea?
Thank
Hope i have been clear, English is not my first language...

BUmp

Similar Messages

Problems with parameter button in Crystal Report Server 2008

Dear all,
I have problems with parameter button in Crystal Report Server 2008.
when I created some parameters and groups in Crystal Report 2008, they showed both parameters in 'Parameter button' and group in 'Group button' on the left, so I can choose or type without clicking 'Refresh button' But when I added it to Crystal Report Server 2008 and I click parameter button , it doesn't show any parameter. Only click refresh button to choose them. On the other hand, for 'Group Tree' is ok. When go to Default Setting-> Parameter, all parameters are in 'Unused parameter' First time I think I had problems with my installation, but when I reinstalled it again, it was like before.
Could any one help me with this?
I appreciate looking forward to your reply
Ketya

Try posting your questionin the correct forum, this is for SAP Business One, not Crystal reports Server

Problems with Tuxedo8.0 under Windows 2003 Server

Hello All.
Could you please help me?
When we were choosing which OS to install on our Tuxedo developers server we
decided
to try Windows 2003 server. We did not suppose that we could have any
problems
with this choise. But we have!
We use it with DB 7.2 workgroup edition and Tuxedo 8.0 (PatchLevel 172).
When one of server processes crashes (for example by exit(1) or by
exception)
(it happend not so rarely, because this server is actively used in
development
and testing processes) we cannot restart this server process!
When I write "restartsrv -i SrvId" in command line nothing happens.
When I write "tmboot -i SrvId" it says "Duplicate server".
When I write "tmshutdown -i SrvId" it just hangs and I have to wait for 10
minutes
while it says "CMDTUX_CAT:949: WARN: Shutdown failed. 0 processes stopped."
Tuxedo WebAdministration conlsole says almost the same - "Failed to
deactivate SRVGROUP/200
(still in state ACTIVE)-10:CMDTUX_CAT:1689: ERROR: Could not shutdown any
servers".
As a result any server crash (including expected) leads to 15 minutes
waiting!!!
As you understand it cound not be accepted!... and it is very annoying. :-)
This problem never happened under Windows 2000 server (a week before I
returned from site
installation where this software works fine under Windows 2000 server).
How can we solve this problem?
Or should we downgrade our OS to Windows 2000?
With regards,
Dmitry.

Dmitry,
Try a bbclean from the tmadmin command line to clean up the BBL so you will be
able to restart the server using the tmboot command.
In addition to this check the values for SCANUNIT and SANITYSCAN in the ubbconfig.
The observation that it takes 15 minutes for TUXEDO to discover that your server
has crashed suggests they have values that might be too high.
Winfried Scheulderman
"Dmitry Bond" <[email protected]> wrote:
Hello All.
Could you please help me?
When we were choosing which OS to install on our Tuxedo developers server
we
decided
to try Windows 2003 server. We did not suppose that we could have any
problems
with this choise. But we have!
We use it with DB 7.2 workgroup edition and Tuxedo 8.0 (PatchLevel 172).
When one of server processes crashes (for example by exit(1) or by
exception)
(it happend not so rarely, because this server is actively used in
development
and testing processes) we cannot restart this server process!
When I write "restartsrv -i SrvId" in command line nothing happens.
When I write "tmboot -i SrvId" it says "Duplicate server".
When I write "tmshutdown -i SrvId" it just hangs and I have to wait for
10
minutes
while it says "CMDTUX_CAT:949: WARN: Shutdown failed. 0 processes stopped."
Tuxedo WebAdministration conlsole says almost the same - "Failed to
deactivate SRVGROUP/200
(still in state ACTIVE)-10:CMDTUX_CAT:1689: ERROR: Could not shutdown
any
servers".
As a result any server crash (including expected) leads to 15 minutes
waiting!!!
As you understand it cound not be accepted!... and it is very annoying.
This problem never happened under Windows 2000 server (a week before
I
returned from site
installation where this software works fine under Windows 2000 server).
How can we solve this problem?
Or should we downgrade our OS to Windows 2000?
With regards,
Dmitry.

Install PeopleTools 8.53 with Linux Issue: Client Windows and Server Linux

Folks,
Hello. I am installing PeopleTools 8.53 Internet Architecture. Database Server is Oracle Dabase 11gR1. OS is Oracle Linux 5. I have installed JDK7, WebLogic 10.3.6, Tuxedo 11gR1 and PeopleTools 8.53 successfully into Oracle Linux 5.
Now, I am setting up PeopleTools8.53 Database. Because the Install Wizard has problem, I set up PeopleTools 8.53 Database manually using Oracle starter database instance named PT853. We need to run Data Mover script in a Windows Client machine to populate PeopleSoft Database instance in Linux Sever machine.
Let's assume:
VM1: Server machine - Oracle Linux 5
VM2: Client machine - Windows XP
Nicolas has this tutorial:
http://gasparotto.blogspot.com/2008/01/on-peoplesoft-road-peoplesoft-database_10.html
From step 15 to step 23, Nicolas does not explain how to connect VM2(client) with VM1(server) and load data from VM2 to VM1.
My questions are:
First, do we need to install PeopleTools 8.53 Windows version into the Client machine Windows XP while installing PeopleTools 8.53 Linux version in the Server machine Oracle Linux 5 ?
Second, how to connect VM2 with VM1 and then load data from VM2 to VM1 ?
Thanks.

So if I understand correctly, you have already created the oracle instance in the Linux machine. Then there is no need to install the Tools again in the Linux machine unless you want to run data mover at Linux.
You can just install the tools and oracle client in windows and load the data by running the data mover from windows. Connection happens through Oracle Client using TNS.
Steps involved are
1. Creating the database using createdb10.sql or otherwise (you have already done this)
2. Run utlspace.sql
3. Run dbowner.sql
4. Run ptddl.sql - considering that you are just installing a Tools database and not any application database
5. Run psadmin.sql
6. Run psroles.sql
7. Run connect.sql
Create the data load dms file by using DBSETUP in data mover
Run the created script and load the data
This information is available in any peopletools installation doc
Hope this helps

Problem with JOGL applet on Windows and Linux

I made a simple test applet using JOGL involving a simple animation and a KeyListener. It put it on a web site, and it loads and runs correctly on my Mac, but it gives a blank box with a red x in it on Windows and Linux. Here is the code that I used to deploy the applet. I based it off the sample from https://jogl-demos.dev.java.net/applettest.html
<applet code="TestApplet"
width=300
height=300
archive="http://download.java.net/media/applet-launcher/applet-launcher.jar,
http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl.jar,
http://download.java.net/media/gluegen/webstart/gluegen-rt.jar,
http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl-demos.jar">
<param name="codebase_lookup" value="false">
<param name="subapplet.classname" value="TestApplet">
<param name="subapplet.displayname" value="JOGL Applet">
<param name="noddraw.check" value="true">
<param name="progressbar" value="true">
<param name="jnlpNumExtensions" value="1">
<param name="jnlpExtension1"
value="http://download.java.net/media/jogl/builds/archive/jsr-231-webstart-current/jogl.jnlp">
</applet>
Does anyone know what I'm doing wrong? Thanks for your help.

never mind. i figured it out.

Problem with socket - Client in C and Server in Java

Hi,
I am building a Java based TCP server socket class in Windows machine. The client is written in C running in Linux.
The client sends data in specified C struct: Eg.
{noformat}struct person {
    int   age;
    float weight;
    int height;
} I am having problem reading it in Java Server. I am using DataInputStream to read byte and trying to decode it in age, float etc. the problem is I can read first two but I cannot properly decode the 'height'.
My question is it possible to directly cast the input stream in corresponding Java object? I guess not but would like to know your ideas.
Is it a good idea to send the struct instead of string?
regards,
rnv

You are perpetrating mistake #1 here. Don't try to send C structs over the wire. The format is dependent on the hardware, the operating system, the compiler, the compiler version, compiler bugs, the #pragmas, and the compiler options in effect. Too many variables. What you should be doing is writing the primitive types to the network, in network byte order, and reading them inJava with the appropriate methods of DataInputStream.

Problem with Absolute Navigation (External Window) and Light Framework Page

Hi All,
We are using Light Framework page for the portal devolopment. We have an application including two webdynpro iviews where absolute navigation is used to traverse from first iview to second iview (When user clicks a button on first iview). We are showing the second iview in external window (SHOW_EXTERNAL). When ever i clicks the button to traverse to second iview, i am getting an exception.
When we are showing it in same window (SHOW_INPLACE), it is working fine. But the iview is appeared in half of the page with scrollbars. It is working fine with default framework page (with both options SHOW_INPLACE and SHOW_EXTERNAL) and dispalyed in original size as mentioned in iview properties.
Could you please suggest us whether there is any work around for this.
Thanks,
Sudheer

Hi Kathiresan
I couldn't see the address bar of the window (In which second iview is getting displayed). But i can observe no parameters that i passed from first iview is visible in the view source of the second iview (When SHOW_EXTERNAL is used in absolute navigation). I could see all the parameters in the view source (when SHOW_INPLACE is used for absolute navigation). But i am using the same url for both the options (for SHOW_INPLACE and SHOW_EXTERNAL).
I doubt about the url being passed when SHOW_EXTERNAL option is used. But when we checked in debug, The correct url is being triggered (Atleast from first iview). Is there any way that could display the second window with address bar. What is making difference between SHOW_INPLACE and SHOW_EXTERNAL with absolute navigation and light framework page.
Could someone please suggest.
Thanks,
Sudheer.

Windows Storage Server 2008 - unzip with drag & drop from Windows 7 client fails

Hello.
As i asked this question in German and got no answer so i try it in English now.
I have the following problem:
We have a Windows SBS 2008, where we store our files. If somebody opens a ZIP-file on a network share from a Windows 7 Client (64 Bit) it is possible to drag & drop the content (multiple files) to a directory. So far everything works as expected.
We now have an additional Windows Storage Server 2008 integrated in our domain (Buffalo Tera Station WS-QV8/R5), where we also store files. If somebody opens the same ZIP-file on a network share of this server from a Windows 7 Client and tries to drag &
drop the content the following happens:
1. only one file is extracted and to display the file a refresh of the explorer view is needed.
2. when the drag & drop action is repeated a second file is extracted
Not alle files are extracted and there is no error message or indication why this happens.
The behaviour is reproducible from another Windows 7 Client (32 Bit).
If we try to drag & drop the files from the ZIP-file on the Windows Storage Server network sahre to a directory on the SBS network share all files are extracted correctly.
On the Windows Storage Server itself all files are extracted without problmems. Therefore it must be a problem with the combination of Windows Storage Server und Windows 7 Client accessing the files via network shares.
Are there any ideas where this problem could be located? Has anybody the same phenomenon and maybe a solution for it?
Thanks in advance
Michael Pruss

Hi Michael,
Thank you for clarifying the issue for us.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Regards
Kevin
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback
on our support quality, please send your feedback here.

Cannot quit Visual FoxPro (Windows Terminal Server 2008 + Citrix XenApp 5 + VMWare vCenter 5.1)

Hi everybody:
This is not the typical question about this error, because the problem here is not about how to quit (CLEAR EVENTS then QUIT). The really and weird problem is that our application do no execute the error trapping routines (Try/Catch and ON ERROR) and tries
to directly Quit.
I have never seen something like this before, error trapping routines not executed.
I try to explain the problem better:
- The user click on the Citrix icon of our App
- Citrix shows the executed processes (establishing connection, applying user config, loading profile, etc)
- The Application (VFP 9 SP2) is started and in any moment, while loading, occurs an error that is not handled by error handlers, and it executes a "kind" of a Quit command, that we detect because have a ON SHUTDOWN to catch it, then the App shut
down and the user must click the Citrix icon and start all over again, up to 7 times, when the App really load and work.
- I think that it is useful to make clear that no QUIT command is really causing this, just the behaviour of the QUIT when an error occurs, but just while loading. If the App get completely loeaded, then everything works as expected
Infraestructure:
- Windows Terminal Server 2008 + Citrix XenApp 5 + VMWare vCenter 5.1
- There are up to 50 concurrent users max in every virtualized server
- More than 10 GB of free disk space / Up to 4 GB ram
- RAM Memory is never used to the max
- CPU (Intel Xeon) is never used to the max (up to 90% in some cases)
- Data (DBFs for temporal work) ar on local drive, not over network (to avoid network known problems with smb2-3)
- There are connection to a Oracle 11 database for permanently storing the data
About the errors:
- They are not always the same or in the same place. In example, in one execution could fail the query of SET("Printer",2), in other execution could fail a SET PROCEDURE TO xxx ADDITIVE (sometimes already loaded), in other could fail a "DO
WHILE .T." in a init event.... completely crazy, and in all cases the errors are not thrown, not a single error code, the App just try to quit, as if ALT+F4 where pressed.
- All this does not happen allways to everyone, but happens many times in the day to many many users as to be worried
- The same user can have this error many times a day, but not allways
- Some of the problems started when migrating to Windows Terminal Server 2008, but didn't notice nothing special in the beginning, but a year later (last 2014) problems tend to go worse
Tried solutions:
- For the "SET PROCEDURE TO xxx ADDITIVE" error, a "IF xxx $ SET('PROCEDURE')" check was added
- The "SET('Printer',2)" check was moved out of initialization code, so it executes when user want to print the first time. In this case was neccesary to talk with IT guys to map a default printer after the App runs, and not in background, as it
was.
- Other checks and modifications was made to minimize posibility of errors
- Adding a timeout of 5 secs in the start of the program, to force a wait
- Restart of virtual servers (not the phisical) every 3 weeks
What I suspect:
- Some Microsoft optimization (memory?, process execution?) in WTS-2008 may interfere?
- Some VMWare memory management may interfere with WTS-2008?
- Some Citrix management may interfere with both?
- Server degradation because of day to day use
Results until now:
- Apparently, adding the timeout to force 5 secs delay and the restart of the server have made a notable enhancement in App start and running
with far fewer
errors
Has
this happened to anyone?
Thanks! o_O
Fernando D. Bozzo / Madrid (Spain)

I never had this type of problems, but somewhat similar start up problems. I'd say it indicates resource problems. Low RAM can cause many unpredictable things. In my case loading much data at the begin of an application caused out of memory errors, which
were reported and logged normally, though.
I made a small tool using Windows API functions GetPerformanceInfo and GetProcessMemoryInfo, you'll find declaration and usage like usual at the News2News site. It's a bit lengthy and cluttered, but pretty much what you find there anyway, so I'll not post
my utility code.
I could quite clearly see how many users degraded available memory per session and at some time no further instance of the application was possible on the server. In my case RDP was used to start the app, Citrix will be quite the same, in the end the application
runs on some server and users see the remote running application.
Bye, Olaf.
Olaf Doschke - TMN Systemberatung GmbH
http://www.tmn-systemberatung.de

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution

can anyone help
i have a problem with photshop cc on windows 8.1 and 4k monitor at 3840x2160 resolution when i lauch photoshop cc everything is very small and i dont know how to get the program at the right size

Search the forum for similar topics dealing with high-DPI displays. 4k is insane, though. I don't think even CC 2014 is up to it.
Mylenium

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Problem with Xsan 2.1.1 and Mac Os server 10.5.6

Hi,
We have a big problem with xsan 2.1.1 and Mac Os server 10.5.6.
- We have one server, is a Open Directory Master, and also is a metadata controller of xsan2. The Volumes of xsan2 are shares via afp, and the clients (moreless 50) connect with server via afp.
- We have some problems, one of them is:
odm fsm [341]: XSAN FSS 'VolDocs [0] ' : Invalid inode lookup: 0x7f80000000007e0 markers 0x0/0x0 nextiel 0x0
This message is always in the log. We stop the volume, and start cvfsck -wv, but dont have anything, how fix it??
- Another problem is with AFP service, suddenly the service stop, and the error is :
mds [58] (error) Server: Mach error queueing checkin to peer manager: (ipc /send) invalid port right.
-What of the meaning of (ipc/send) invalid port right??.
And the last error is:
-com.appelAppleFileServer [347] MDSChannelPeerRequest: (ipc/rcv) timed out.
Need Help please!.

My configuration:
- Master Directory:
Hardware Configuration:
Model: Xserve
Processor: 2x2,8 Ghz Quad-Core Intel Xeon
Memory 8 Gb
Disk: 70,04 Tb
Software:
Kernel Version: 9.6.0
System Version: Mac OS X Server 10.5.6
Xsan 2.1.1
Services: AFP, DNS, Open Directory RADIUS
Status: connected Users: 37
This server is the open directory Master and metadata controller of xsan2, but we have another server that is open directory replica and metadata controller of xsan2. The fisrt server have too many errors with afp, the service stop and the server is dead, and you must restart via terminal with the command sudo reboot. I dont know what happen, do you help me please?

I am having problems when i have minimized windows and try to open a new window it will open all minimized windows along with the new window. It just changed when mozzilla updated. It did not do this before the update.

I am having problems when i have minimized windows and try to open a new window it will open all minimized windows along with the new window. It just changed when mozzilla updated. It did not do this before the update. Before the update if i had minimized windows they would stay minimized when i opened a new window. Please help ,I would guess it is just a setting somewhere but i cannot figure out where the setting is. Thanks jason

This issue can be caused by the ASK.com Toolbar.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Problem with Windows Vista Server 2008 - Font characters replaced with square blocks on login screen

Hi! Last week, I set up a server for a client (Windows Vista Server 2008). Everything was working fine until this week when I did a remote login, and the server's screen shows all blocks instead of character (ie. "Administrator" shows up as Rectangular blocks) - and when I type in the password box, my characters come out the same blocks. The computer lets me login like this but then when the desktop displays, all texts is Blocks - like the windows default font is missing.
Anybody else run into this mystery and is there a fix?
Thanks.

Hello,
Based on my experience, this issue might be caused by compatibility issues of video card driver and language options settings.
I’d like to suggest you try the following steps to fix the issue.
1.    Please check whether you have installed correct video card drivers on both client and server machines. You’d better download the latest drivers from Video card manufacture and reinstall the drivers on both of the machines.
2.    Please confirm whether the regional and language options settings on client and server machines are the same. If not, please temporarily change the settings on two machines to be the same and have another test.
3.    If you use some third-party remote desktop connection tools to connect to the server, please have another try with Windows build-in remote desktop connection.
I hope this helps, thanks.
Regards,
Neo Zhu

Problem with m1319f mfp on WIndows 7 and Server 2008

Similar Messages

Maybe you are looking for