Problem with Mac Messenger and

Recently I have been big issues with Messanger. Whenever I tried to login to Yahoo through Mac Book Messages it keep on asking for passord and never loginn. However I had tried using gmail, which works perfectly fine.
While I downloaded Yahoo Mesanger for MAc from Yahoo and tried to login, It still agev me error please check your login credentails ( Please note that I am abel to login to yahoo mail and other products with same credentails)
I did tried to change password and login but still facing the same problem.......
Kindly help

Hi,
That does seem odd.
The GoogleTalk login in Messages uses port 5223 and SSL which would need the Mac Firewall and your router to have those ports open.
The Yahoo part of Messages uses port 443, which in most routers is always open (It is used by Apple Login page for these Support Communities)
The Yahoo App itself though does use ports that are above the 1024 threshold (above this the ports need to be opened).
If the router is using UPnP to open the ports this is not the issue.
I would query the Name or ID you are using with Yahoo.
I am under the impression that in the Yahoo app you can use one of the valid types of ID
I am not sure how you do that at the sign in screen (I may also have misunderstood what I read).
I do know that the Yahoo part of Messages (And iChat 6) only allows the use of Yahoo Buddy names rather than being able to add MSN or Lotus Buddies.
I am not aware that the password has to be limited to a certain number of characters (The AIM Side is limited to 16 characters and this can be an issue when using Apple IDs that are recognised and Valid AIM names).
Do you have Yahoo active (For Messages) in System Preferences > Mail, Contacts and Calendars ?
9:49 PM Saturday; December 8, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Similar Messages

Problem with Mac Mini and Panasonic PT-AE700 projector

I just bought a brand new Mac Mini and intended to connect it through hdmi to my Panasonic PT-AE700 projector (with a 10 m hdmi-hdmi cable and a dvi-hdmi adapter). However there is no signal recognized by the projector.
Any suggestions? I have tried with two different dvi-hdmi adapters between the Mini and the cable. Both work fine with my MacBook Pro, but with the Mini there is no signal.
Mac Mini Mac OS X (10.4.7)

Thanks again BSteely for your answer.
Unfortunately I still haven't been able to get anything out from the projector through HDMI.
However, I've found someone with a similar problem. It seems the problem is the lenght of the HDMI cable (which in fact is closer to 15 m than 10 m). HDMI is designed to handle at least those 10-15 m runs, but the problem seems to be DVI, which is only capable of something around 5 m. Since I'm converting from DVI to HDMI, I'm subject to DVI's limitations. And the MBP seems to have better capability of handling the weaked signal than the Mini.
Read more: http://www.avsforum.com/avs-vb/showthread.php?t=712218
Gefen should have an amplifier (HDMI Super Booster) that could solve the problem. I just ordered it to see if it could help in strenghtening the signal and solve the problem for me.
Read more: http://www.gefen.com/kvm/product.jsp?prod_id=2939
If someone has any experience from the booster, please let me know.

Problems with Mac Mini and Premiere Pro CC 2014

I am new to video editing with a background in graphic design and typically do short corporate videos.
I am currently using a Mac Mini (late 2012 model), running Mavericks 10.9.5. And I keep having a problem with Premiere Pro CC 2014 freezing in the program monitor, while scrubbing through the timeline.
Here are my specs:
Processor: 2.6 GHz Intel Quad Core i7
Memory: 16 GB
Graphics: Intel HD Graphics 4000 1024MB
I am also using a 2TB Fantom G-Force Megadisk external HD to store all my media. It is connected via a Firewire 800 cable
I'm wondering if the freezing is caused by Mac Mini having a integrated graphics card vs. a discreet one. Has anyone else had any problems like this using a Mac Mini?

I am new to video editing with a background in graphic design and typically do short corporate videos.
I am currently using a Mac Mini (late 2012 model), running Mavericks 10.9.5. And I keep having a problem with Premiere Pro CC 2014 freezing in the program monitor, while scrubbing through the timeline.
Here are my specs:
Processor: 2.6 GHz Intel Quad Core i7
Memory: 16 GB
Graphics: Intel HD Graphics 4000 1024MB
I am also using a 2TB Fantom G-Force Megadisk external HD to store all my media. It is connected via a Firewire 800 cable
I'm wondering if the freezing is caused by Mac Mini having a integrated graphics card vs. a discreet one. Has anyone else had any problems like this using a Mac Mini?

Monitor problems with Mac Pro and Leopard

I can't turn energy saver off.I have two LCD monitors connected, one 19" Viewsonic VX924 and one 30" Dell3007WFPHC . I set energy saver:Put the display(s) to sleep when computer is inactive for Never.
Yet I can turn the monitors off and back on later and it's put the Viewsonic to sleep ,but not the Dell.
I then open the energy saver system preferences again and low and behold it's changed itself back to sleep at 26 minutes.Ghost in the machine?Why doesn't it put the Dell to sleep as well?????Why does it keep changing back to 26 minutes regardless of how many times I set it to never and lock it?
I even tried just using the Viewsonic only and setting to never,I also trashed a pref file I thought was energy saver , still same behavior, this is a REALLY big hassle ,because I have to restart every time just to get this monitor back up.
Any clues?
Many thanks!
Hayes
Memphis,Tn.

I think there are some powermanagement prefs in your account and in /Library but I also read of problems with ViewSonic VX back when the Mac Pro came out in 9/06.
I would give the SMC button a good 'kick' and see if that helps.
And when you restart, this is normal safe restart, or forced?
SMC button, this is restart button on the inside of the mac?
It's always a safe restart,the whole computer doesn't go down, it's just the viewsonic power light blinks on and off and there is not much I can do to get back up quickly, but restart. I have played with display settings and got it back before, but that's hit or miss and very time consuming.
Thanks you so so much for your help and suggestions!

UAG problems with OSX - same problem with Mac Mail and Outlook 2011 (via EWS)

Hi folks,
I'm trying to fix the last snagging issue I have with OSX clients in a UAG / Exchange 2010 deployment:
When trying to connect Mac Mail or Outlook 2011 the connections are very slow to start up, both at initial config and thereafter.
On connection I see lots of the same error re Session Cookies in UAG and no connection in the mail client. If I leave it for a few minutes, sometime many minutes, the errors stop and I eventually get a working connection.
The error is:
"Sesson Attempted to Access Restricted Application"
User with source IP address x.x.x.x tried to access application Exchange EWS that was restricted that was restricted for the session. This might indicate an intrusion attempt by misusing the session cookie.
Has anyone got any suggestions on how to fix this ?
Many thanks
Steve

Ruud, no, we didn't find a solution, or rather our solution (so far) is to tell users not to use Mac Mail and to use Outlook 2011 instead, which seems to work fine (after some Office updates!)...and we haven't upset anyone with that requirement
(yet).
There are some very long discussions on Apple support forums about the whole Mavericks / Mac Mail / Exchange 2010 issues.
I do hope to have another go at this problem sometime soon, I'm sure there must be a solution (and my money says it relates our hardware load balancers).
Steve

Problem with Mac 9 and X

Hi,
I have a problem. I have just installed Max OS X Tiger on my computer. This is not the problem. The thing is that I used to work on Mac OS 9 and now, nothing of my old work works on Tiger! I have upgraded all my programs so that I could open my old files but it doesn't work, too. So what can I do?
When I try to open one of my files the system says that I have to run Mac OS 9 but it doesn't work with Tiger, or at least I haven't been able to do it.
Please, I need help!

This is because your old OS 9 files are associated with the OS 9 application that created them. Instead open the OS X application you will use, then from the application's Open menu navigate to the particular file you want and then open the file from the application. Then use the application's Save As to save a copy of the file in the OS X application's new format.
Alternatively, select a particular file with the mouse and press COMMAND-I to open the Get Info window. In the Open With pane select the OS X application to use with that file from the drop down menu. Then click on the Change All button. This will now permanently associate all such files with the selected OS X Application.
As an aside, if you have the OS 9 application and the OS X Application simultaneously installed on the same volume, you may find problems with their working correctly. You should delete the OS 9 version.
To use OS 9 within OS X (Classic) you must have OS 9.1 or later installed on the hard drive.

I have a problem with MAC Mail and Mediacom

I have a problem using mac mail with Mediacom. I can recieve messages, but i cannot send messages. Of course the support people at Mediacom can't seem to help me. i have searched threads here and tried some of the things but have had no luck. Please help.

I had the same problem with a relatives macbook on mediacom broadband just today,
Something gets corrupted if you enter the server wrong on the first try and even editing to correct it won't fix it. You must delete the server and add a new one.
To fix it go to mail preferences and click account at the top of the prefs window. At the bottom of the account pane click the outgoing server list and select edit server list. Select your server and hit the - symbol on the left below the list. I then close the prefs, save changes and quit mail. Re-launch Mail and open prefs, select account again and edit outgoing server, click the + at the bottom of the list and add a server, double click the server where it says double click here and type mail.mchsi.com in the box. close the prefs and save changes and you should now be able to send.

Problem with mac mail and Mediacom

Just bought a macbook 13" with 4GB and 2.4 core2duo 2.4
I have a problem with 10.5.6 and mac mail with mediacom at work. I can receive but can't send. I have no problems with bellsouth.net when using that provider at work.
Mediacom has no answers so I'm here. I've filled that required fields correctly using mail.mchsi.com in incoming and out going mail servers. Firefox mail client works fine with Mediacom but I want to use the Apple client. I've used advice from what I could find on google and nothing works such as repair permissions to change ports. I hope a Mediacom user can shed some light to this problem. If all else fails I will use the Firefox mail client but I really don't want to.
Thanks

I had the same problem with a relatives macbook on mediacom broadband just today,
Something gets corrupted if you enter the server wrong on the first try and even editing to correct it won't fix it. You must delete the server and add a new one.
To fix it go to mail preferences and click account at the top of the prefs window. At the bottom of the account pane click the outgoing server list and select edit server list. Select your server and hit the - symbol on the left below the list. I then close the prefs, save changes and quit mail. Re-launch Mail and open prefs, select account again and edit outgoing server, click the + at the bottom of the list and add a server, double click the server where it says double click here and type mail.mchsi.com in the box. close the prefs and save changes and you should now be able to send.

Problem with Mac mini and HP w2207h

I have a new Mac mini and a HP w2207h screen. I have a problem with the resolution. The screen wants to be on 1680x1050, but when i turn that mode on, the screen is just blinking and you can't see anything. so i have to use the 1080p modus. But it's kind of blury. Can anyone help? Does apple has some kind of support mail??

Don't waste your time or money on the adaptors. I have a hp 2207h and I tried th dvi to hdmi and the dvi to vga, neither work, I still don't have a working monitor. Waited on the phone for tech support for 30 minutes. Then got a total line of crap.
This monitor works flawlessly with my comcast motorola hd cable box, with my sony dvd player, with my toshiba laptop, with my hp computer. But will not work with a mac mini... The only logical reason given the wide varity of equipment it will work on, is that apple does not support HDMI standards, if they did, it would work.
The apple does work on my 40 in tv. But thats not where I want it. So, this is useless to me. And after the line of crap I got from tech support, I'm thinking about quiting apple all together.
This ***, I was really excited about my first apple computer. Now after 4 hours, and nothing but frustration and no support at all from apple, I'm thinking about giving up and sticking with PC's from here on out. Worst experiance ever.
I may even switch to android and chuck my 4...

Problem with Mac Mini and LG Flatron monitor locked in 'power saviing mode'

Hi I bought my Mac Mini in July 2009 and have being having more and more issues with my monitor. Form the beginging the monitor had issues after the mac went to sleep. I have tried setting the exact refresh rate to 60 using SwitchResX, but now I can't get the monitor to display anything is stuck in 'power saving mode' - I have tried everything shutting down the moitor the Mac, disconnection the adapter, nothing works. BTW the monitor is fine I am using my PC laptop and the monitor to write this cry ofr help right now. Its a LG Flatron L222WS and I am using a mini display port to VGA adaptor.
I read somewhere that reverting to Mac OS 10.5.6 might do the trick - any other ideas?

Try starting in Safe mode and see if you can get the monitor to work again. If it gives a useable screen in Safe mode, go into Displays preferences and set the resolution to 1680 x 1050 and restart normally.
Hopefully that will get you back to where the monitor is working again with the mini.
There should be no relationship between a monitor's sleep habits and whether refresh is exactly 60Hz or not, so I wouldn't mess with SRX anymore to try and correct that problem.
http://support.apple.com/kb/HT1455

Problem with .mac account and mail 2.05 (os x 10.4.4)

hi!
i am not able to add a .mac account in mail 2.05. system is os x 10.4.4.
.mac settings in system preference work fine, on my cube with os 10.3.9 i can add the .mac account without problems.
in mail under 10.4.4 i can´t even select accounts besides IMAP, POP and EXCHANGE. if i delete mails plist and even the mail file and achieving a "virginal mail" i just can select these 3 accounts (POP,IMAP,EXCHANGE). strange because if i setup .mac settings in system preferences before setting up a POP mail account (i have 3 POP accounts besides .mac), the .mac account is automatically set up in mail. but even than i can´t set up manually (another) .mac account (can´t be selected in account pulldown menue) as well as soon as i delete it it can´t be resetup.
no way with new user, same procedure. i reinstalled mail from tiger-dvd as well as reinstalling 10.4.4 combo update and repair disc permissions. no way to get .mac to work the normal way.
has anyone any idea?
thanks so long,
peter

the empty folder ~/Library/Mail/ at root level seemed to be the problem of not being able to activating the .Mac account in mail. after copying this folder onto harddisk again (i have a new "20 iMac at work with 10.4.4) the problem was solved. no idea how to get this folder again besides installing a blank 10.4.x install onto external firewire hdd or having a second system...
thanks so long.
i guess i made a mistake when migrating my old mail prefs from 10.3.x to 10.4.x blank install when moving the folders to 10.4.x maybe i have first choosen the ~/Library/Mail/ folder at root level and when recognizing that mail is not working with new user, i´m sure i might have deleted the whole mail prefs and mail folder on root level and copied the whole stuff again into USER/Library/Mail/. Therefore the folder ~/Library/Mail/ at root level became empty. i purchased .Mac just a few days ago so i recognized this failure just now...

Problem with MAC Pinning and new VLAN

[Cross posting to Nexus 1000V and UCS forums]
Hi all, I have a working setup of UCS 1.4 (3i) and Nexus 1000V 1.4 and as per the best practice guide am using 'channel-group auto mode on mac-pinning' on the Nexus uplinks. I am having trouble when adding a new VLAN into this environment, and it is a reproducable problem across two different installations.
I go through the usual VLAN creating process on the Nexus, the upstream network and within UCS itself. I create the new vethernet port profile and set it as an access port in the new VLAN. However when I attach a VM (either existing or new) to this new vethernet port profile within vCentre the VM cannot communicate with anything. However, if I disable MAC pinning with 'no channel-group auto mode on mac-pinning', the VM instantly starts to talk to the outside world and the new VLAN is up and running. I can then turn MAC pinning back on again and everything continues to work.
So the question is, is this behaviour normal or is there a problem? Disabling MAC pinning does have a brief interruption to the uplink so is not a viable long-term solution for the customer when they want to add new VLANs. Is there a way to add new VLANs in this scenario without any network downtime, however brief?
Thanks

Simon,
Let's gather some further outputs if you're able to recreate this (if this is prod, let me know and I'll whip this up in my lab).
Go through the process of setting up the new VLAN. Once you confirmed your VM has no connectivity when using a PP tied to the new VLAN, gather the following outputs into a text file and attach to this thread:
From the VSM:
show vlan
show int trunk
show log last 15
module vem x execute vemcmd show vlan y (x = module of VEM where VM is running, y is the VLAN ID)
module vem x execute vemcmd show bd y (y = VLAN ID)
module vem x execute vemcmd show pc
module vem x execute vemcmd show port
module vem x execute vemcmd show pinning
module vem x execute vemcmd show trunk
From the CLI of UCS Interconnect:
connect NXOS
show vlan
show int trunk
Also please highlight or Identify:
- Problem VLAN ID #
- VM veth # in question (1000v)
- vEth # for each Service Profile vNIC used for your VEM uplinks (UCS)
We'll start with this and work from here. Once I have these outputs I'll let you know if I need anything else.
Regards,
Robert
(I'll keep this as the main thread, and update the 1000v forum once we resolve)

SERIOUS Problem with mac pro and kernel panics

Hi guys, I have a mac pro with 6 gigabytes of RAM + a RAID 0+1 system with 4 750 gigabytes HD's. ( 2 drives work in stripped mode, and the other 2 drives mirror them )
I was experiencing some frecuent kernel panics when using final cut or trying to watch DVD's a few weeks ago. I saved some error logs then and uploaded them to my e-mail. The problem is that now the frequency of the panics is so high that the computer has turned unusable, it reaches the desktop without panics, but when I click finalcut and it starts opening , it panics all the time, if I start to open folders, it panics, anything I try = panic.
Weeks ago I made the Apple Hardware test, testing the memory a lot and the memory seemed to be fine,
Could you guys help me to identify the source of this?, I am desperate because the MacPro is my Working tool. Is there a way to check the hard drives also? ( remember I have raid 0+1 )
Here are the error logs that I managed to capture.
LOG 1
Sat May 31 22:47:56 2008
Machine-check capabilities (cpu 0) 0x0000000000000006:
6 error-reporting banks
Machine-check status 0x0000000000000004
machine-check in progress
MCA error-reporting registers:
IA32MC0STATUS(0x401): 0x1400000000000000 invalid
IA32MC1STATUS(0x405): 0x0000000000000000 invalid
IA32MC2STATUS(0x409): 0x0000000000000000 invalid
IA32MC3STATUS(0x40d): 0xb22000cf0002010a valid
MCA error code : 0x010a
Model specific error code: 0x0002
Other information : 0x002000cf
Status bits:
Processor context corrupt
Error enabled
Uncorrected error
IA32MC4STATUS(0x411): 0x0000000000000011 invalid
IA32MC5STATUS(0x415): 0xb20000300c000e0f valid
MCA error code : 0x0e0f
Model specific error code: 0x0c00
Other information : 0x00000030
Status bits:
Processor context corrupt
Error enabled
Uncorrected error
panic(cpu 0 caller 0x001A860C): Machine Check at 0x78478fb9, thread:0xc1374f0, trapno:0x12, err:0x0, registers:
CR0: 0x80010033, CR2: 0x7335b564, CR3: 0x00d50000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000050, ECX: 0x00000001, EDX: 0x09b858b0
ESP: 0x7f57bc40, EBP: 0x7f57bd38, ESI: 0x09b858b0, EDI: 0x00000001
EFL: 0x00010046, EIP: 0x78478fb9
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x4e9e28 : 0x12b0e1 (0x457024 0x4e9e5c 0x13321a 0x0)
0x4e9e78 : 0x1a860c (0x460248 0x78478fb9 0xc1374f0 0x12)
0x4e9f58 : 0x19fbe3 (0x4e9f70 0x0 0x0 0x0)
0x7f57bd38 : 0x1a9b07 (0xffffffff 0x7fffffff 0x202 0x6)
0x7f57bd58 : 0x1a2a4e (0x0 0x538680 0xaad3193a 0x3f4)
0x7f57bd88 : 0x1357b3 (0x0 0xaad3193a 0x3f4 0x538568)
0x7f57bde8 : 0x135e53 (0x1 0xc1374f0 0x9a91c7c 0x1)
0x7f57be38 : 0x136941 (0xc13750c 0x30 0x7f57be98 0x13930a)
0x7f57be78 : 0x1369e5 (0x138fb3 0x0 0x0 0x1e)
0x7f57be98 : 0x13973a (0x138fb3 0x0 0x80 0x2)
0x7f57bf08 : 0x1398cd (0xa4d69cc 0x9a98058 0x0 0x37a6e7)
0x7f57bf38 : 0x37a7cd (0x4c03 0x4d03 0x37a6e7 0x37a813)
0x7f57bf78 : 0x3dbe77 (0xa077780 0xc13c740 0xc13c784 0x0)
0x7f57bfc8 : 0x19f084 (0xc0182e0 0x0 0x1a20b5 0xbbf02e8)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb04ebed8
BSD process name corresponding to current thread: Final Cut Pro
Mac OS version:
9C31
Kernel version:
Darwin Kernel Version 9.2.0: Tue Feb 5 16:13:22 PST 2008; root:xnu-1228.3.13~1/RELEASE_I386
System model name: MacPro1,1 (Mac-F4208DC8)
LOG 2
Sun Jun 1 18:59:34 2008
Machine-check capabilities (cpu 0) 0x0000000000000006:
6 error-reporting banks
Machine-check status 0x0000000000000005
restart IP valid
machine-check in progress
MCA error-reporting registers:
IA32MC0STATUS(0x401): 0x1000000000000000 invalid
IA32MC1STATUS(0x405): 0x0000000000000000 invalid
IA32MC2STATUS(0x409): 0x0000000000000000 invalid
IA32MC3STATUS(0x40d): 0xb620000f0002010a valid
MCA error code : 0x010a
Model specific error code: 0x0002
Other information : 0x0020000f
Status bits:
Processor context corrupt
ADDR register valid
Error enabled
Uncorrected error
IA32MC3ADDR(0x40e): 0x00000000279ce9c0
IA32MC4STATUS(0x411): 0x0000000000000011 invalid
IA32MC5STATUS(0x415): 0xb200001806000e0f valid
MCA error code : 0x0e0f
Model specific error code: 0x0600
Other information : 0x00000018
Status bits:
Processor context corrupt
Error enabled
Uncorrected error
panic(cpu 0 caller 0x001A860C): Machine Check at 0x78478fb9, thread:0xa70ce40, trapno:0x12, err:0x0, registers:
CR0: 0x80010033, CR2: 0x73b17564, CR3: 0x00d50000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x00000050, ECX: 0x00000001, EDX: 0x09b858b0
ESP: 0x7f23f890, EBP: 0x7f23f988, ESI: 0x09b858b0, EDI: 0x00000001
EFL: 0x00000046, EIP: 0x78478fb9
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x4e9e28 : 0x12b0e1 (0x457024 0x4e9e5c 0x13321a 0x0)
0x4e9e78 : 0x1a860c (0x460248 0x78478fb9 0xa70ce40 0x12)
0x4e9f58 : 0x19fbe3 (0x4e9f70 0x0 0x0 0x0)
0x7f23f988 : 0x1a9b07 (0xffffffff 0x7fffffff 0x202 0x6)
0x7f23f9a8 : 0x1a2a4e (0x0 0x538680 0xeec06eb 0x43f)
0x7f23f9d8 : 0x1357b3 (0x0 0xeec06eb 0x43f 0x538568)
0x7f23fa38 : 0x135e53 (0x1 0xa70ce40 0x9a91c7c 0x14025b)
0x7f23fa88 : 0x136941 (0xa70ce5c 0x8c98967c 0x0 0x0)
0x7f23fac8 : 0x1369e5 (0x0 0x0 0x0 0x0)
0x7f23fae8 : 0x8c961a05 (0x0 0x0 0x64 0x3e8)
0x7f23fb48 : 0x8c9508aa (0xbc23600 0x7b01c 0x7f23fb68 0x698fc000)
0x7f23fb78 : 0x8c950978 (0x69732000 0x7b01c 0x1 0x1)
0x7f23fb98 : 0x8c91fe8f (0x69732000 0x7b01c 0x40000 0x15)
0x7f23fc88 : 0x4375c0 (0x698c7000 0x1 0x7f23fcdc 0x7f23fcd8)
0x7f23fcf8 : 0x43be19 (0x698c7000 0x1 0xa63b6b8 0x1)
0x7f23fd28 : 0x43bf30 (0x698c7000 0x1 0xa63b6b8 0x7f23fd58)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(5.2.4)@0x8c903000->0x8c989fff
dependency: com.apple.NVDAResman(5.2.4)@0x8c500000
dependency: com.apple.iokit.IONDRVSupport(1.5)@0x7f61a000
dependency: com.apple.iokit.IOPCIFamily(2.4.1)@0x781f0000
dependency: com.apple.iokit.IOGraphicsFamily(1.5.1)@0x7f871000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9C31
Kernel version:
Darwin Kernel Version 9.2.0: Tue Feb 5 16:13:22 PST 2008; root:xnu-1228.3.13~1/RELEASE_I386
System model name: MacPro1,1 (Mac-F4208DC8)

What you mention is really interesting , maybe I could try to benchmark the card very hard to see if I get the panics there. I will try that for sure, because my RAID wasn't actually a 0+1. It's what they call a RAID 10 , ( two groups of mirrored drives, + striped )
It's like this post in macosrumors, but instead of two groups of striped disks, the big group is striped, and I got two smaller mirrored groups.
http://forums.macrumors.com/showthread.php?t=445731
And I think that sould be working just fine without the RAID PCI-X card right ? ( maybe I'm wrong here , that's why I need your input guys . )

Networking problem with Mac Mini and TIVO

this is what i want to do
move my recorded shows on my tivo series 3 over to my mac mini via my ethernet connect
my Tivo sees my pictures in I-photo as well as my pictures on Photobucket
but my Mac Mini will not see my Tivo
i downloaded Tivo Desktop and Tivo transfer as recommended
tivo transfer on my Mac Mini still will not see my Tivo
now they do recommenr Toast 9 for burning the videos
but i am not burning just transfering
my versio of Toast in version 8
i am asking this because do i need to buy toast 9 or is there something else preventing the Mac from seeing the tivo
remember the tivo DOES see the mac
thanks in advance for any help
i hope i posted it in the right area, networking seemed to br the closest

Don't waste your time or money on the adaptors. I have a hp 2207h and I tried th dvi to hdmi and the dvi to vga, neither work, I still don't have a working monitor. Waited on the phone for tech support for 30 minutes. Then got a total line of crap.
This monitor works flawlessly with my comcast motorola hd cable box, with my sony dvd player, with my toshiba laptop, with my hp computer. But will not work with a mac mini... The only logical reason given the wide varity of equipment it will work on, is that apple does not support HDMI standards, if they did, it would work.
The apple does work on my 40 in tv. But thats not where I want it. So, this is useless to me. And after the line of crap I got from tech support, I'm thinking about quiting apple all together.
This ***, I was really excited about my first apple computer. Now after 4 hours, and nothing but frustration and no support at all from apple, I'm thinking about giving up and sticking with PC's from here on out. Worst experiance ever.
I may even switch to android and chuck my 4...

Using iSight with Mac Messenger ?

I was just wondering if anyone knew a way to use the iSight with Mac Messenger, and, or view someone else's webcam? I've been told by friends that it's not possible but I just wanted to check here incase there is some 'backalley' way to do so.
Thanks for your time

Thanks, but i was just really looking if it was possible with Mac Messenger. I've tried aMSN in the past and it gave me a lot of problems so i don't want to go down that route again.
It doesn't really matter if it isn't possible i just though it wouldn't hurt to ask.
Thanks anyway

Problem with Mac Messenger and

Similar Messages

Maybe you are looking for