Problem with mac os x v10.7  and ./configure in terminal

Hi,
I have been trying to install a program via Terminal however i get error message and and the installation terminates.
When I checked in the configure.log , i saw ..."configure: failed program was: | /* confdefs.h.  */ | "  how can this be fixed ?
thanks
Jis

hey my friend i figure out a way to fix it. do te following
If you have any external hardrive or usb drive or sd card remove it. If you have acces to a windows computer, plug your devices there and delete all the .something files that are created by mac os.  Make sure to setup windows so you can see hidden and system files. Delete all thos .somethig files and olders.
Then plug in and reboot your mac and run the rm command now it will work

Similar Messages

  • Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

    Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
    My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
    Please help!!!
    Thanks,
    Paolo

    Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
    Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
    Personally I think of all the issues possible its DVDSP vs QT.
    Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

  • Printing/creating PDF problems with Mac OS 10.6.4 and word v.X

    In my job at university I use Word 2003 (version 10) in my new iMac. Since I updated to MacOS 10.6.4 I have problems with the printing menu. That means that I can not print or convert to PDF or even generate a preview. When trying to print or obtain a preview, word freezes and I have to force quit. When trying to generate a pdf file it does, but the generated file is unreadable (it says is damaged) and word freezes again. I have played with the preferences, change user and it didn't help. I checked the Font Book and indeed they were many duplicated fonts. I sorted them out, but the problem persists. With very short files it works, but with longer ones word invariably crashes when trying to print or make a pdf. I took one long .doc file and I copied into my laptop (MacBook pro, 2008) that was running 10.6.3. I printed it and converted to pdf; no problems at all. Then, for the sake of knowledge, I updated the system to 10.4.6 and then I couldn't print or create a pdf with the very same file, so it seems that certainly the update is reponsible. So now I know cause but I can not print from any of my computers. To me convert to pdf is an important functionality so I would appreciate any help. I have some ideas: reinstall Office 2003? reinstall 10.6 from the disk (and not update)? use Time Machine to restore the system as it was before the update?
    I didn't detect problems in Office 2004, or any other programs in my macs. Unfortunately, I need Office 2003 for compatibility with some other software. Thanks in advance!

    I updated my MBP to 10.6.4 last night and today I was printing fine from Word 2008 (v12.2.5). I haven't used Office vX since Tiger so I cannot comment on its stability with the latest update. But I suggest that if you haven't done so already, try opening Disk Utility and running Repair Disk Permissions on the 10.6.4 partition. Once this has completed I also suggest that you reset the printing system, restart your Mac and then add your printer queues again.
    *How to Reset the Printing System*
    1. Open System Preferences > Print & Fax
    2. Move your mouse over the Printers list
    3. Hold down the Control button and click the mouse (or right click if supported).
    4. Click "Reset printing system ..."
    5. Restart your Mac

  • Problem with Mac graphics card (radeon 5750) and PP?

    I've had Apple try to solve the sluggish scrubbing and editing problem in Premiere Pro CS6 on my iMac (i7 2.93GH with 12 GB RAM). They have replaced the internal disk, the logic board, and 5750 processor, all with no solution. What's the solution?
    Is there an unsolvable problem with this processor and Premiere Pro?
    dmingo

    Welcome to the forums, and congratulations on your excellent English usage and grammar.
    The usual cause of video problems in these iMacs is something called the PAV board. The graphics cards themselves are seldom an issue. The board can be replaced as a unit, and is usually available on eBay as a iMac PAV board or Down Converter.
    It's not a normal user replacable item. Although some posters here do it regularly, I don't. I find it more efficient to buy another unit off eBay. Often the used iMacs are nearly the same price as the PAV boards.
    Takeapart for swapping drives - slot load is a series of pictures that will help if you need to open the machine.
    David

  • Printing problem with Mac OS 10.5.6 and HP Photosmart C8180

    I'm new to Macs and have just bought an iMac and an HP photosmart C8180 printer. The problem I'm having is trying to get the wireless printing option working on the Mac. I've tested that the wireless connection is working on the printer by installing the software on my old Dell Laptop and it works fine between the PC and printer. It's also working with the USB lead between the Mac and the printer but it's just the wireless connection that seems to be the problem.

    You select the options in the Print dialog of the application you are using. Just be sure you have the extended dialog showing (big down arrow next to the Printer drop down menu.) There are various options presented, some of which are in additional drop down menus.

  • Problem with mac osx 10.6.4 and audio firewire device

    ok i use an edirol fa-66 , the problem is a random one , sometimes when i play music with itunes , logic or even the preview mp3 feature , the sound go downsampled and then stops, the only way to return is turn off and turn on the audio interface. I had this problem time ago only with logic 9.0.2 but with the version 9.1.1 everithing got right. Now with osx 10.6.4 the problem come back on all the audio programs (not only logic),so i have returned to 10.6.3, everithing works fine.
    conclusion
    in 10.6.4 there is something wrong with the core audio that is incompatible with edirol fa device.
    maybe with osx 10.6.5 apple can resolve this?
    i'm thinking to buy a motu device (they have their driver and don't use core audio)

    up

  • Hello  I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out?  thanks

    Hello  I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out?  thanks

    Refer below link once
    App doesn’t open | Progress wheel spins continually

  • After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

    After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

    Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
    my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

  • Is Final Cut Studio 1 (5.1.4) compatible with Mac OS X v10.4.11 and Mac OS

    Is Final Cut Studio 1 (5.1.4) compatible with Mac OS X v10.4.11 and Mac OS X v10.5 Leopard?
    Thank you very much for telling, Has anybody done already?

    I can verify that it is compatible with 10.4.11.
    Shane

  • HT1338 has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    has anyone else had problems with their mail not loading properly and the multi gestures stopped working on their mac pro after new updates?

    Have you tried calling Apple tech support?
    http://www.apple.com/contact/

  • HT1443 I have a macbook with mac osx 10.5.8 and i have a new hp printer that requires mac osx v10.6 or mac osx v10.7. do i need to upgrade and if so how do i do it and which version should be downloaded

    I have a Macbook with Mac OSX 10.5.8 and i have a new hp printer that recommends version 10.6 or 10.7. Do i need to upgrade, what version, and how do I get and install this upgrade? Thanks

    Full instructions here:
    https://discussions.apple.com/thread/4540761

  • Is Photoshop Elements compatible with Mac OS X v10.8?

    Is Photoshop Elements 10 compatible with Mac OS X v10.8? Thinking of purchasing it but in system requirements it only mentions up to
    Mac OS X v10.7.

      No problems have been reported with Mountain Lion but you may wish to download the free trial using the link below and test the software for 30 days. If this is your first purchase you may wish to wait for PSE11 which is usually issued in September.
    http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=en_us

  • I cannot perform security update with Mac OS X v10.411

    I cannot perform security update with Mac OS X v10.411.  My Mac Book Pro is super behind concerning updates and security.

    Yes, I too have that problem.  And, I have actually been hacked into, had all of my files, folders, photos, applications, sys pref, (in-other-words) EVERYTHING copied and recopied.   It has been a nightmare.  My identity was completely stolen.  What makes it worse is that when I told apple ~ I was told by 1 Apple Supervising Technician that I was out of my mind and that it wasn't possible.  He was very dismissive and treated me if I were some kind of idiot.  Well, check out below.  This is since Saturday or Sunday last.  I didn't authorize this and I sure as **** don' know who any of these people are. 
    I installed the 10.5 disk.  And I too, like many Macbook Pro users had the "Black Screen" bug.  So I had to go back to 10.4.  I went back and this is what I inherited.   I now rarely have control over the computer, never my printer and I my security has been and is constantly being compromised.  I believe that Apple needs to own up to this and, perhaps, do something about it?  Am I asking too much?
    Last login: Wed Sep 14 20:28:35 on console
    Welcome to Darwin!
    localhost:~ cat$ who
    cat      console  Sep 14 20:28
    cat      ttyp1    Sep 14 20:28
    localhost:~ cat$ whois
    usage: whois [-aAbdgiIlmQrR6] [-c country-code | -h hostname] [-p port] name ...
    localhost:~ cat$ finger
    Login    Name                 TTY  Idle  Login  Time   Office  Phone
    cat      catherine ronalds   *con    56  Wed    20:28
    cat      catherine ronalds    p1         Wed    20:28
    localhost:~ cat$ whois *con
    Whois Server Version 2.0
    Domain names in the .com and .net domains can now be registered
    with many different competing registrars. Go to http://www.internic.net
    for detailed information.
       Server Name: CON.ZZBB.COM
       IP Address: 203.231.42.121
       Registrar: INAMES CO., LTD.
       Whois Server: whois.inames.co.kr
       Referral URL: http://www.inames.co.kr
       Server Name: CON.VENUS.ORDERBOX-DNS.COM
       IP Address: 74.54.56.236
       IP Address: 74.54.56.227
       IP Address: 74.54.56.231
       Registrar: DIRECTI INTERNET SOLUTIONS PVT. LTD. D/B/A PUBLICDOMAINREGISTRY.COM
       Whois Server: whois.PublicDomainRegistry.com
       Referral URL: http://www.PublicDomainRegistry.com
       Server Name: CON.TOM.RU
       Registrar: REGIONAL NETWORK INFORMATION CENTER, JSC DBA RU-CENTER
       Whois Server: whois.nic.ru
       Referral URL: http://www.nic.ru
       Server Name: CON.MERCURY.ORDERBOX-DNS.COM
       IP Address: 67.15.253.251
       IP Address: 67.15.47.189
       IP Address: 67.15.253.220
       Registrar: DIRECTI INTERNET SOLUTIONS PVT. LTD. D/B/A PUBLICDOMAINREGISTRY.COM
       Whois Server: whois.PublicDomainRegistry.com
       Referral URL: http://www.PublicDomainRegistry.com
       Server Name: CON.MARS.ORDERBOX-DNS.COM
       IP Address: 74.52.140.84
       IP Address: 74.52.140.82
       IP Address: 74.52.140.83
       Registrar: DIRECTI INTERNET SOLUTIONS PVT. LTD. D/B/A PUBLICDOMAINREGISTRY.COM
       Whois Server: whois.PublicDomainRegistry.com
       Referral URL: http://www.PublicDomainRegistry.com
       Server Name: CON.MAIYEUBE.NET
       IP Address: 207.218.250.214
       Registrar: MELBOURNE IT, LTD. D/B/A INTERNET NAMES WORLDWIDE
       Whois Server: whois.melbourneit.com
       Referral URL: http://www.melbourneit.com
       Server Name: CON.MAFIAWORLDCONFLICT.COM
       IP Address: 96.125.168.211
       Registrar: DOMAIN.COM, LLC
       Whois Server: whois.domain.com
       Referral URL: http://www.domain.com
       Server Name: CON.KONKAK.COM
       IP Address: 67.214.175.71
       Registrar: TUCOWS.COM CO.
       Whois Server: whois.tucows.com
       Referral URL: http://domainhelp.opensrs.net
       Server Name: CON.KANGX.COM
       IP Address: 210.118.234.6
       Registrar: YESNIC CO. LTD.
       Whois Server: whois.yesnic.com
       Referral URL: http://www.yesnic.com
       Server Name: CON.JCSMEDIA.COM
       IP Address: 216.199.69.35
       Registrar: WILD WEST DOMAINS, INC.
       Whois Server: whois.wildwestdomains.com
       Referral URL: http://www.wildwestdomains.com
       Server Name: CON.HNIP.CO.KR
       Registrar: INAMES CO., LTD.
       Whois Server: whois.inames.co.kr
       Referral URL: http://www.inames.co.kr
       Server Name: CON.ETVILLE.COM
       IP Address: 112.220.108.114
       Registrar: ASADAL, INC.
       Whois Server: whois.asadal.com
       Referral URL: http://www.asadal.com
       Server Name: CON.EARTH.ORDERBOX-DNS.COM
       IP Address: 67.15.253.252
       IP Address: 67.15.47.188
       IP Address: 67.15.253.219
       Registrar: DIRECTI INTERNET SOLUTIONS PVT. LTD. D/B/A PUBLICDOMAINREGISTRY.COM
       Whois Server: whois.PublicDomainRegistry.com
       Referral URL: http://www.PublicDomainRegistry.com
       Server Name: CON.DIABLOIII.PRO
       Registrar: OVH
       Whois Server: whois.ovh.com
       Referral URL: http://www.ovh.com
       Server Name: CON.DELDC.COM
       IP Address: 210.91.181.71
       Registrar: YESNIC CO. LTD.
       Whois Server: whois.yesnic.com
       Referral URL: http://www.yesnic.com
       Server Name: CON.CONFESIONESDESOFIA.COM
       IP Address: 174.121.246.152
       Registrar: MYDOMAIN, INC.
       Whois Server: whois.namesdirect.com
       Referral URL: http://www.namesdirect.com
       Server Name: CON.CAUTO.COM
       IP Address: 12.31.226.135
       Registrar: NETWORK SOLUTIONS, LLC.
       Whois Server: whois.networksolutions.com
       Referral URL: http://www.networksolutions.com
       Server Name: CON.BLAZINGREALMS.COM
       IP Address: 68.67.78.230
       Registrar: OVH
       Whois Server: whois.ovh.com
       Referral URL: http://www.ovh.com
       Server Name: CON.BELLSFERRY.COM
       IP Address: 216.199.69.35
       Registrar: WILD WEST DOMAINS, INC.
       Whois Server: whois.wildwestdomains.com
       Referral URL: http://www.wildwestdomains.com
       Domain Name: CON.NET
       Registrar: UNIVERSAL REGISTRATION SERVICES INC. DBA NEWDENTITY.COM
       Whois Server: whois.newdentity.com
       Referral URL: http://www.newdentity.com
       Name Server: NS1.SEDOPARKING.COM
       Name Server: NS2.SEDOPARKING.COM
       Status: clientDeleteProhibited
       Status: clientTransferProhibited
       Status: clientUpdateProhibited
       Updated Date: 04-may-2011
       Creation Date: 03-may-2003
       Expiration Date: 03-may-2012
       Domain Name: CON.COM
       Registrar: TUCOWS.COM CO.
       Whois Server: whois.tucows.com
       Referral URL: http://domainhelp.opensrs.net
       Name Server: NS1.CON.COM
       Name Server: NS2.CON.COM
       Status: clientTransferProhibited
       Status: clientUpdateProhibited
       Updated Date: 05-nov-2010
       Creation Date: 05-dec-1993
       Expiration Date: 04-dec-2011
    >>> Last update of whois database: Thu, 15 Sep 2011 04:25:10 UTC <<<
    NOTICE: The expiration date displayed in this record is the date the
    registrar's sponsorship of the domain name registration in the registry is
    currently set to expire. This date does not necessarily reflect the expiration
    date of the domain name registrant's agreement with the sponsoring
    registrar.  Users may consult the sponsoring registrar's Whois database to
    view the registrar's reported date of expiration for this registration.
    TERMS OF USE: You are not authorized to access or query our Whois
    database through the use of electronic processes that are high-volume and
    automated except as reasonably necessary to register domain names or
    modify existing registrations; the Data in VeriSign Global Registry
    Services' ("VeriSign") Whois database is provided by VeriSign for
    information purposes only, and to assist persons in obtaining information
    about or related to a domain name registration record. VeriSign does not
    guarantee its accuracy. By submitting a Whois query, you agree to abide
    by the following terms of use: You agree that you may use this Data only
    for lawful purposes and that under no circumstances will you use this Data
    to: (1) allow, enable, or otherwise support the transmission of mass
    unsolicited, commercial advertising or solicitations via e-mail, telephone,
    or facsimile; or (2) enable high volume, automated, electronic processes
    that apply to VeriSign (or its computer systems). The compilation,
    repackaging, dissemination or other use of this Data is expressly
    prohibited without the prior written consent of VeriSign. You agree not to
    use electronic processes that are automated and high-volume to access or
    query the Whois database except as reasonably necessary to register
    domain names or modify existing registrations. VeriSign reserves the right
    to restrict your access to the Whois database in its sole discretion to ensure
    operational stability.  VeriSign may restrict or terminate your access to the
    Whois database for failure to abide by these terms of use. VeriSign
    reserves the right to modify these terms at any time.
    The Registry database contains ONLY .COM, .NET, .EDU domains and
    Registrars.
    No match "*con."
    localhost:~ cat$

  • I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

    wen6275,
    It looks like you're actually using a camera or phone to take a photo of your monitor.
    That's not what is commonly known as a "screen shot". 
    It looks like you're on a Mac.  Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
    I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
    Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file.  Would you mind elaborating?

  • AD account Login problem with MAC 10.6.8

    Hi All,
    We have around 50 odd MAC that are connected to windows server 2008 R2. the user were logining in to these MACs using their AD account. Recently few of the random MAC did not allow the user to login using their AD account.When analyzed though the MAC shows that it has connected to the Domain and the server is active with green button it has unbind itself from the server.I had to login in as local user bind the MAC back to get this resolved.
    Now the same has started happeneing for most of the MAC that we have and every morning I have login as local Admin and unbind / bind the MAC with the server. this gets reset once the user reboots or shutsdown.
    Have tried with few of the below solution but nothing helped:
    Solution 1:
    <key>mdns_timeout</key>
    <integer>2</integer>
    The integer value is in seconds; changing it to at least 5 should allow the Mac OS X client to reconnect to the Active Directory domain after a network interruption. In some configurations, a larger timeout value may be required.
    You can change this value by using the sudo command and a text editor to edit the preference file directly. Or you can use the Terminal command below, making sure to enter it all on a single line:
    sudo /usr/libexec/PlistBuddy -c 'Set :mdns_timeout 5' /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist
    Solution 2:
    I have seen all of the probable solutions and tried everything and still I am getting issues with 10.6.6 and after rebooting the Mac gets unbind. Or the Mac gets Network Accounts Available even when not accessing the list of users from AD. But the thing that I have done that has solved all my issues with AD on the Macs is to uncheck the box to search on all domains. For some reason I am seeing that when the Macs have this option checked, it searches through out the forest on the same domain controller more than once, so AD stops the handshaking of the authentication.
    I hope this helps like it did on our Network, since then I have not seen the Macs lose the binding or slow SMB.
    If you've tried this please let us know.
    TIP: Uncheck Allow Authentication from any domain for Mac AD problems
    Wednesday, April 20, 2011
    Steven Wells sent a fix and an explanation of problems with Macs losing their binding to Active Diretory:
    Unchecking "Allow authentication from any domain in the forest" is working at our college. We have been beating our heads on this for about 2 terms, with no understanding of why it works in some places and not in others. When we found this working, our IT guy said that the Security SID is being duplicated, when it looks in other domain forest, and that is what is causing the problem. This is the first time I have found an explanation for the problem.
    If you've tried this approach please let us know.
    Solution 3:
    Solved it. Create a file in Textedit with the name 'auto_master' (no file extension) with the following contents:
    # Automounter master map
    +auto_master # Use directory service
    /net -hosts -nobrowse,hidefromfinder,nosuid
    /home auto_home -nobrowse,hidefromfinder
    #/Network/Servers -fstab
    /- -static
    Place this in /etc/ folder
    Hope this helps
    solution 4:
    TIP: a Kerberos fix for OS X 10.5 and 10.6 binding to Active directory
    Friday, November 11, 2011
    Mehdi Mafi forwarded a fix he found for problems with Leopard and Snow Leopard binding to Active Directory:
    This was taken from Dane Riley's imaging building for DeployStudio.
    With Mac OS X Leopard every Mac is now running a KDC (Kerberos Distribution Center). Basically each imaged machine is using the same security certificate and hash. Deploying a single image will deploy the same KDC to every system. This [Apple] article covers how to reset the local KDC so that each system is unique. Basically, do the following:
    Launch Keychain Access
    Search for com.apple.kerberos.kdc and delete all 3 items
    Using Terminal type sudo rm -fr /var/db/krb5kdc
    After deployment, perhaps using Apple Remote Desktop to all systems, re- establish the KDC by typing sudo /usr/libexec/configureLocalKDC
    If you've tried this approach with Mac OS X 10.5, 10.6, or even Lion, please let us know. .
    TIP: More on a kerberos fix for AD binding problems
    Monday, November 14, 2011
    Mehdi Mafi updated his Friday report about Mac OS X 10.6 problems binding to Active Directory:
    You may want to add this. If the Mac keeps unbinding from AD (people can't log in to a Mac), here is how to fix it:
    Unbind it from Domain
    Launch Keychain Access
    Search for com.apple.kerberos.kdc and delete all 3 items
    Using Terminal type sudo rm -fr /var/db/krb5kdc
    Re-establish the KDC by typing sudo /usr/libexec/configureLocalKDC
    Bind it to domain again ( When you bind, uncheck allow authentication from any domain in the forest in: Directory Utilitiy-> Advanced Options\Administrative ) this fix the issue that sometimes it can' find AD under search space.
    If you tried this please let us know.
    Solution 5:
    For Snow Leopard AD login issues, use upper case domain
    Solution 6: for .local
    To create this StartupItem, create the following directory as root:
    /Library/StartupItems/FixADAuth
    Then chown it to root:wheel and chmod it to 755. These must also be the owner/permissions on the two files it will contain, below:
    Contents of our /Library/StartupItems/FixADAuth/FixADAuth:
    #!/bin/bash
    . /etc/rc.common
    date > /var/log/FixADAuth.log
    n=0
    AuthSuccess=0
    while [ $AuthSuccess != 1 ]
    do
    id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local; n=$(($n+1))
    done
    echo Authentication successful: $AuthSuccess >> /var/log/FixADAuth.log echo Operation count: $n >> /var/log/FixADAuth.log
    date >> /var/log/FixADAuth.log
    Contents of our /Library/StartupItems/FixADAuth/StartupParameters.plist:
    Description = "Fixes Active Directory authentication issue";
    Uses = ("Disks");
    Obviously you'll need to change "middlewich.local" to your own domain name (and the network interface name if your connection is wireless). The script checks to see if it can see the user "Administrator" on the domain, as he's a fairly common bloke, but if you've renamed yours for security reasons then pick another one. I've also included some logging functionality for debug purposes, so you can verify how well the script is working if you need to and time it in your environment before telling the users how long to wait. The /var/log/FixADAuth.log file will contain the date/time the process started, the success variable set to 1 (just to verify), how many DNS operations were required to fix the problem, and the date/time it ended. For us the time difference is normally about +30-40 seconds with around 120-180 operations taking place. Once you're happy with the script, you can strip it down to its bare functionality if you like, like so for us:
    #!/bin/bash
    . /etc/rc.common
    AuthSuccess=0
    while [ $AuthSuccess != 1 ]
    do
    id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local
    done
    I hope this helps someone!
    Regards

    You are welcome.
    But the question is 10.6 mac  just like 10.6.8  , as long  as its the same and works.
    Yes. You can save some updates by using the combo update.
    10.6.8 Combo Updater

Maybe you are looking for