Problem with mac's sound output

Recently, I have upgrade my mac to Yosemite. And then the problem comes along. I found that my mac always didn't output any sounds. After some searching, I found that in the sound panel of system preference, the sound output device always automatically changes to "Soundflower(64ch)". If I change it to "Internal Speaker", then the sound comes out. How the output device "Soundflower(2ch)" and "Soundflower(64ch)" come from? And why the sound output device automatically changes to "Soundflower(64ch)" every time when I plug in an earphone or restart my mac?

Try this, go to Users/Library/Preferences folder. navigate down to com.apple.systemsound.plist. Remove it from the folder to the desktop.
Now go to System Preferences/ Sound and input the preferences you want for your sound output and input etc. This creates a new .plist in your Users Library
Preference folder. Now either logout and then login or restart the computer. These new settings should now hold. If they do and you are happy then you can trash the older .plist file.
Good luck.

Similar Messages

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

Problem with kde and sound

Hi!
I've a problem with KDE and sound.
When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
Same happens with kde start.
Can anybody help me?
Thanks!

Pilli wrote:
Hi!
I've a problem with KDE and sound.
When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
Same happens with kde start.
Can anybody help me?
Thanks!
Change the player to mplayer or something in the control panel (Sound and Multimedia - System notifications - Player Settings).

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Refer below link once
App doesn’t open | Progress wheel spins continually

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

AD account Login problem with MAC 10.6.8

Hi All,
We have around 50 odd MAC that are connected to windows server 2008 R2. the user were logining in to these MACs using their AD account. Recently few of the random MAC did not allow the user to login using their AD account.When analyzed though the MAC shows that it has connected to the Domain and the server is active with green button it has unbind itself from the server.I had to login in as local user bind the MAC back to get this resolved.
Now the same has started happeneing for most of the MAC that we have and every morning I have login as local Admin and unbind / bind the MAC with the server. this gets reset once the user reboots or shutsdown.
Have tried with few of the below solution but nothing helped:
Solution 1:
<key>mdns_timeout</key>
<integer>2</integer>
The integer value is in seconds; changing it to at least 5 should allow the Mac OS X client to reconnect to the Active Directory domain after a network interruption. In some configurations, a larger timeout value may be required.
You can change this value by using the sudo command and a text editor to edit the preference file directly. Or you can use the Terminal command below, making sure to enter it all on a single line:
sudo /usr/libexec/PlistBuddy -c 'Set :mdns_timeout 5' /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist
Solution 2:
I have seen all of the probable solutions and tried everything and still I am getting issues with 10.6.6 and after rebooting the Mac gets unbind. Or the Mac gets Network Accounts Available even when not accessing the list of users from AD. But the thing that I have done that has solved all my issues with AD on the Macs is to uncheck the box to search on all domains. For some reason I am seeing that when the Macs have this option checked, it searches through out the forest on the same domain controller more than once, so AD stops the handshaking of the authentication.
I hope this helps like it did on our Network, since then I have not seen the Macs lose the binding or slow SMB.
If you've tried this please let us know.
TIP: Uncheck Allow Authentication from any domain for Mac AD problems
Wednesday, April 20, 2011
Steven Wells sent a fix and an explanation of problems with Macs losing their binding to Active Diretory:
Unchecking "Allow authentication from any domain in the forest" is working at our college. We have been beating our heads on this for about 2 terms, with no understanding of why it works in some places and not in others. When we found this working, our IT guy said that the Security SID is being duplicated, when it looks in other domain forest, and that is what is causing the problem. This is the first time I have found an explanation for the problem.
If you've tried this approach please let us know.
Solution 3:
Solved it. Create a file in Textedit with the name 'auto_master' (no file extension) with the following contents:
# Automounter master map
+auto_master # Use directory service
/net -hosts -nobrowse,hidefromfinder,nosuid
/home auto_home -nobrowse,hidefromfinder
#/Network/Servers -fstab
/- -static
Place this in /etc/ folder
Hope this helps
solution 4:
TIP: a Kerberos fix for OS X 10.5 and 10.6 binding to Active directory
Friday, November 11, 2011
Mehdi Mafi forwarded a fix he found for problems with Leopard and Snow Leopard binding to Active Directory:
This was taken from Dane Riley's imaging building for DeployStudio.
With Mac OS X Leopard every Mac is now running a KDC (Kerberos Distribution Center). Basically each imaged machine is using the same security certificate and hash. Deploying a single image will deploy the same KDC to every system. This [Apple] article covers how to reset the local KDC so that each system is unique. Basically, do the following:
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
After deployment, perhaps using Apple Remote Desktop to all systems, re- establish the KDC by typing sudo /usr/libexec/configureLocalKDC
If you've tried this approach with Mac OS X 10.5, 10.6, or even Lion, please let us know. .
TIP: More on a kerberos fix for AD binding problems
Monday, November 14, 2011
Mehdi Mafi updated his Friday report about Mac OS X 10.6 problems binding to Active Directory:
You may want to add this. If the Mac keeps unbinding from AD (people can't log in to a Mac), here is how to fix it:
Unbind it from Domain
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
Re-establish the KDC by typing sudo /usr/libexec/configureLocalKDC
Bind it to domain again ( When you bind, uncheck allow authentication from any domain in the forest in: Directory Utilitiy-> Advanced Options\Administrative ) this fix the issue that sometimes it can' find AD under search space.
If you tried this please let us know.
Solution 5:
For Snow Leopard AD login issues, use upper case domain
Solution 6: for .local
To create this StartupItem, create the following directory as root:
/Library/StartupItems/FixADAuth
Then chown it to root:wheel and chmod it to 755. These must also be the owner/permissions on the two files it will contain, below:
Contents of our /Library/StartupItems/FixADAuth/FixADAuth:
#!/bin/bash
. /etc/rc.common
date > /var/log/FixADAuth.log
n=0
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local; n=$(($n+1))
done
echo Authentication successful: $AuthSuccess >> /var/log/FixADAuth.log echo Operation count: $n >> /var/log/FixADAuth.log
date >> /var/log/FixADAuth.log
Contents of our /Library/StartupItems/FixADAuth/StartupParameters.plist:
Description = "Fixes Active Directory authentication issue";
Uses = ("Disks");
Obviously you'll need to change "middlewich.local" to your own domain name (and the network interface name if your connection is wireless). The script checks to see if it can see the user "Administrator" on the domain, as he's a fairly common bloke, but if you've renamed yours for security reasons then pick another one. I've also included some logging functionality for debug purposes, so you can verify how well the script is working if you need to and time it in your environment before telling the users how long to wait. The /var/log/FixADAuth.log file will contain the date/time the process started, the success variable set to 1 (just to verify), how many DNS operations were required to fix the problem, and the date/time it ended. For us the time difference is normally about +30-40 seconds with around 120-180 operations taking place. Once you're happy with the script, you can strip it down to its bare functionality if you like, like so for us:
#!/bin/bash
. /etc/rc.common
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local
done
I hope this helps someone!
Regards

You are welcome.
But the question is 10.6 mac just like 10.6.8 , as long as its the same and works.
Yes. You can save some updates by using the combo update.
10.6.8 Combo Updater

Email Problem with Mac

Hi, I am new to FIOS so I hope this is the proper board to post in. I set up 2 subaccounts for verizon.net email and configured them for my Mac Mail program. Everything worked well for about 2 days, and all of a sudden the Mail program keeps asking for my password (even though it was saved in my Mail settings) and says the the incoming mail server is offline. I've Googled this issue and see that others have posted about the same authentication error. Has anyone else here experienced - and solved - this problem? Thanks.

I am having the same problems with Mac eMail. I have two Macs, one that is running Lion and the other is running Snow Leopard. I have spent days on the phone with Apple and Verizon and they are blaming each other and neither have a solution. Have you been able to get a response? It looks like this is something that happens from time to time but never really gets fixed.
Please let me know if there has been a fix since the Mac Mail update in July? With the Union Issues Verizon doesn't have enough people to address the issues both in person ( I had a tech come to the house and he didn't know anything about software ) or on the phone. They keep kicking it back to Apple. I also have a couple iPhones and both are working fine. So this seems to be OS X specific. I've had Macs and iPhones for 3 years or more.
Just makes me think something was done to the mail servers they didn't get correct.

Problem with Mac Office Password Protection

I'm running Mac OS X 10.7.5 with MS Word for Mac 12.3.5 and MS Excel for Mac 12.3.5.
I created a Word (.docx) and an Excel (.xlsx) document on my Mac at home, both with password protection. I uploaded the documents onto Google Drive. I was able to open the documents a few times with the password on my Mac at home, and on my PC at work. However, now upon opening the docs, Word and Excel say the password is incorrect (both home MAC and work PC).
I know I'm entering the correct password. I'm 100% positive. I was able to open the docs a few times previously just a day before. Now they're completely inaccessible. My questions are:
(1) Is this a common problem with Mac for Word/Excel docs?
(2) Are there ways to recover the password (a dictionary based brute force solution is unlikely to work, as I use non-word passwords with numbers)?
(3) If this is a common problem, are there other alternatives to password protecting or encrypting Mac for Word and Excel docs that don't cause problems?
Any feedback is greatly appreciated. Thanks.

Could just be thats the way it runs on Rosetta. I called in apple to ask if I could return office '04 because I didn't want to take the chance, they were more than eager to return it for me because of the fact it would be slow/maybe have problems running in Rosetta.
I just got iWorks instead till the universal version of office comes out (which if you buy office '04 you'll have to buy the new universal version as well, or so the rep told me).

Problems with "Mac Help"

My help files, especially "Mac Help", no longer work properly since upgrading to Tiger. If I open "Mac Help", for example, the help window will pop up, but the links will not work (nothing happens when I click on them) and the search feature in help will not work either (the little gray "clock" just spins next to the help bar and nothing else ever happens). Any suggestions on this one? As I'm a relatively recent Mac convert, the help feature was something that I came to rely on. Thanks!

Hi CP,
This is a common problem with Mac Help. When it happens, try first (quit Help) deleting this folder:
Home/Library/Caches/com.apple.helpui
If Help still doesn't work, try then deleting those files:
Home/Library/Preferences/com.apple.helpviewer.plist
Home/Library/Preferences/com.apple.help.plist
(and this one if you find it):
Home/Library/Preferences/com.apple.helpui.plist
See also this KB article for more info
- Mac OS X 10.2, 10.3: Mac Help Viewer unexpectedly quits
and this excellent X Lab FAQ
- Troubleshooting Help Viewer
It seems (not sure about that), that Help caches get easily corrupted when interrupting searches instead of patiently waiting for its internet accessings etc?
Good luck!
Axl

I have a problem with the external sound of my ipod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

I have a problem with the external sound of my iPod, when I take the headphones the music keeps playing and the ipod recognizes still have a headset connected. how do I get external sound out?

- Try insering and removing the headphone plug a dozen times or so.
- Try cleaning out the headphone jack in the iPod.
- Resett he iPod. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restoe to factory defaults/new iPod
If yu still have the problem that indicates a hardware problem, likely a bad headphone jack. Yu can make an appointment at the Genius Bar of an Apple store to confirm.
If not underwarranty Apple will only exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
A third-party place like the following is less expensive. Here is one. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

Problem with SB1240 USB sound card

I'm pulling hair here! I've just bought a SB240. Windows (XP Pro, SP3) detected it and I can select it fine for listening. But when I open Sound and Audio Device Properties and select Sound Recording/Volume, I see the Capture panel with the three inputs, but all the controls are greyed out and immovable. I also use the application "Total Recorder" by High Criteria, in which I can select the SB240 device but the only input line it sees is SPDIF Interface.
I'm stumped. Can anyone help?
John?

&Re: Problem with SB240 USB sound card
Thank you. I did a complete uninstall, including the device itself (from Device Manager) as well as all drivers and any SB related software. As recommended by Creative, I had previously installed the driver software from the supplied CD and that seems to have been the problem.
I let Windows re-detect the SB, but? got a "problem ... device may not work correctly.." during the detection, so I was not hopeful (this had not happened the first time I installed the device).
Nevertheless it now does work fully and is properly configured in "Total Recorder" too.
So I would suggest not using the supplied drivers and software - at least not in WinXP. But it's not very confidence inspiring.
John

Thawte Personal Email Cert - Problem with Mac Mail

Hi, I have requested a free cert from Thawte and there seems to be a problem with Mac Mail (using 2.0.7).
I am using Entourage to send a signed message from [email protected] to [email protected]
If I check mail for [email protected]
Mac Mail reports "There was a problem reading the digital signature for this message"
If I check the same account with Thunderbird, everything works fine.
Anyone else having or had problems?
-chris

Hi,
Thanks for the responses. I requested another cert and that did not help. Here is the process I used after requesting another cert.
1. Logged into www.thawte.com and requested a new cert.
2. Using Firefox, retrieved the cert.
3. In Firefox, backed up the cert to a pkcs12 file.
4. Opened Keychain and deleted the first cert.
5. Imported the pkcs12 backup file. Imported fine.
6. Open Entourage, under tools, accounts, exchange profile, security, selected the cert Thawte Freemail Member.
7. Checked all 3 options (sign, include cert, clear test signed.
8. Created a test message from Entourage to .mac account address.
9. Checked mail with Mac Mail and signature fails.
10. Check with 1.02 Thunderbird and it comes back with valid digital signature.
Next, I sent a test email to my Exchange account from Entourage and that message verifies fine. It just seems to not work when I check my email with Mac Mail.
Thanks!
-chris

Problems with my Creative Sound Blaster X-Fi Xtreme Gamer bulk P

Hey there!!!
I acutally have a Problem with my Creative Sound Blaster X-Fi Xtreme Gamer bulk PCI-Card. The Card by it self is working perfectly. But i cant use the Digital-In as the Mic in. I dont know how to turn it so that the Digital-In is the Mic-In. So my Microphone donst work. I hear everything but nobody hears my Voice. There is sometimes a Signal but not the correct, the Guys playing with me dont hear anything of my voice...
Can somebody help me plz?
Greetings Thomas

Moep wrote:
Why i must use TORRENT?
Why is this driver not on your page?!
Please fast help...
and this is a secure download you mean? ....
Jeez, calm down already. I never said you HAD to download it, but if you want any of the applications that work in XP to work in Vista then you're going to need that disk; either by downloading it or fromk here,?http://us.creative.com/products/prod...7&product=6743?
2. ISN'T THIS THE DRIVER FOR ME?! http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=7838Message Edited by Moep on 07-3-20070:7 PM
Maybe you really should take a vallium or something and re-read what I posted, then you may just grasp the fact that that is the exact driver I told you you needed.

Problem with SAP Script FAX output

Hi Friends,
I have problem with SAP Script Fax output.
After I issued output using the messge type, the print preview format shows me correct alignments and the right data. But when I go to List display using the menu bar functions from the print preview screen, the list is showing me the right data, but all the alignments at the main window went wrong.
How do I rectify this problem? I need correct alignments in both form display and list display.

Hi Sasidhar,
Have you tried with different fax machine.
Regards,
Atish

I got my iPhone 4S and I think I have a problem with it. Sound when locking and unlocking is quiet compared with other iPhone 4S. I compared it with others and really is a little quiet. Other people have confirmed it too. Other sounds may be better. No pr

I got my iPhone 4S and I think I have a problem with it. Sound when locking and unlocking is quiet compared with other iPhone 4S. I compared it with others and really is a little quiet. Other people have confirmed it too. Other sounds may be better. No problem tones, watching videos. This problem or is it something normal?

I have this problem too, but it is intermittent. Sometimes the lock/unlock volume will drop to barely-audible, even though in settings the volume slider hasn't changed. If I then move the volume slider, it fixes the problem and the lock sounds jump back to normal, but then later on the problem will happen again.

Problem with mac's sound output

Similar Messages

Maybe you are looking for