Problem with Macbook Pro 15 (Late 2007)

What I did is that I tried to install a 500gb threw the macbook. Then suddently, the macbook pro did not wanted to reconize the gb that I put in. I tried all the shortcut keys and none of them work. It only stayed with a Apple Logo with the circle on the bottom spinning. It freezes sometimes. I tried everything, & it still freezing and did all the trick.
Yesturday, It did not decided to turn on. The screen did not want to turn on. The blinking light on the bottom did not want to turn on also. I clicked on the power on but it actually turned on but the screen and the blinking light did not wanted to turn on. I tried on the keyboard, & it did not wanted to turn on the lights. I tried everything my best to get it back working.
Please help me with this problem. Maybe for me I think its the logic board. I'm not sure because once I got it, It was working 100% except for the apple and circle on the bottom spinning.
Thank you for reading and helping,
DaddyCorrupted

You must first prep the new drive then install OS X on it:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Similar Messages

  • Problems with Macbook Pro (late 2008) display

    Hello everyone...
    Yesterday I was using my macbook pro, when suddenly one third of the screen became fuzzy (i know, weird!). Then, like 10 minutes later it became normal again....2 minutes later, fuzzy again (same third...) and its been that way since...I thought that with a reboot it would get fixed....maybe an software or a driver glitch....but nope.
    I've been searching in forums for something like it, but I got back no answer...maybe one of you have answers for me
    I'm posting some pictures of my screen so you can see what I'm talking about...
    http://img256.imageshack.us/i/img9982lr.jpg/
    http://img338.imageshack.us/i/img9993lr.jpg/
    http://img338.imageshack.us/i/img9985lr.jpg/
    Alejandro.-

    The cause is likely a manufacturing flaw of some sort which just took some time to manifest itself. Apple will likely replace the display for you under warranty. If you don't have 3 year Applecare, be sure to contact Apple before your warranty runs out. Once you have reported the problem and gotten a case number to document it, you can arrange for the repair at your convenience.
    Good luck!

  • Graphic problems with Macbook Pro Late 2011 13"

    I'll try to explain it as clear as possible. This started to happen a couple weeks ago:
    My Macbook screen started to being white-blurred, and the image slows down while this happen. At first I thought that was happening randomly, but then -I guess- I realised that it was lid-related; when I open the lid more than 90 degrees the problem started to happen, sometimes it starts to happen even if the lid is in its 'working fine area' though , but after moving the lid up and down several times, it gets 'fixed'... until it happens again. There are times when it doesn't get fixed instantaneously, and it's really driving me crazy.
    My first thought was that it might be the flex (not sure if this is the right name of it tough), I mean the cable that goes from the screen to the logic board. If so, or even in another case scenario, I have an Early 2011 Macbook Pro 13" where I can use any part, except for the logic board, if needed.
    Thanks in advance.

    Well the Apple logo will always be visible through the screen when there is a fairly bright light behind the screen.
    That is totally normal.
    As for the freezing and since this is your first Mac computer I would like to make you aware of one thing.
    The way Mac OS X operating system works is slightly different then Windows. In Windows when you click the X in the upper right hand corner of the program you are using that program closes freeinig up the memory it was using. In the Apple OS, OS X, when you click the X in the upper left hand corner of the windows you are using all that does is close that active window. It dos not close the program. So if you have started up 2-3-4-5-6 programs to do something in them and then clicked the X all you have done is closed those windows for all those programs. The programs is still running. So you can end up with several programs using memory when they shouldn't be. You have to actually close those program by first using Command+Tab to see what programs are still open then go to the menu bar on the right side where the name of the program is displayed and click on that name and select Quit Program Name. Or once the name of the program is in the menu bar press Command+Q (Quit) to close that program.
    Get in the habbit of always using that keyboard shortcut when you are done using a program.
    Having multiple program open will cause the system to run slow.
    The hard drive Apple is putting the newer Macbook Pros are of the slower type. Running at 5400RPMs as opposed to the faster 7200RPM models. Why I don't know as the faster drives don't cost that much more. Because of this all program run slightly slower. To open, to save files to and when used as a swap disk to expand on the physical memory in the computer. Which in turn will make the system seem sluggish and can casue some freezes.
    So make sure you have closed all programs before opening another, and only have at the most 2-3 progams open at the same time.

  • Macbook Pro, late 2007, OS 10.9.1, trouble booting up beeps with grey screen

    Macbook Pro, late 2007, OS 10.9.1, trouble booting up beeps with grey screen

    Beeps at startup are an indication that there is not enough working RAM DIMMs to start up.

  • Can i use an WD Scorpio Black 750GB in my Macbook pro late 2007 ver 3.1 ??

    Hi everybody
    Just wondering of I would run into problems installing an WD Scorpio Black 750GB in my Macbook pro late 2007 ver 3.1. 2.6Ghz.
    Already have 2 500GB installed in RAID but need more space and want to upgrade but someone told me that this MBP ver 3.1 only supports max 500GB drives......
    Is that true??
    Thanks
    Uffe / Lobojuan

    If the hard drive is 9.5mm thick any SATA hard drive can be used.
    A few may require jumpers if they are higher than 1.5Gbps in data speed.
    Only 17" MacBook Pros of that generation could take 12.5mm thick drives.
    The capacity is not normally the limit anymore, it is the thickness and data path speeds that make a difference. Also your machine supports external SATA drives that are 3.5" with this adapter:
    http://eshop.macsales.com/item/Other%20World%20Computing/EXP34SATA2P1/
    These drives are faster than any internal, ethernet, or Firewire drives you can add to your machine.

  • I have a problem with macbook pro OS 10.5.8 and cannot play youtube anymore, before Yes

    i have a problem with macbook pro mac os 10.5.8 and cannot play youtube but before ther is no problem abou this. now there is warning sign to install adobe flash player, but when i install adobe it said cannot be compatible, and I went to the apple store, they sid need to upgrade the system to mac IOS 10.6 and i dont want to spend much... somebody to help me this

    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    Upgrading from Snow Leopard to Lion or Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    This, Adobe Flash Player 12.0.0.70, is the current version of Flash. It should work with Snow Leopard or later.

  • Rechargeable battery macbook pro late 2007

    bought the 4 rechargeble battery for Macbook pro late 2007 model less than a year from apple; and it totally out now. the warranty on apple site is nullified for products like this. is there a way to get a replacement from apple ?

    Here is the infromation on the first battery mentioned (ie. the newer one):
    Battery Information:
    Model Information:
    Manufacturer: Sony
    Device name: *****
    Pack Lot Code: 0002
    PCB Lot Code: 0000
    Firmware Version: 102a
    Hardware Revision: 0500
    Cell Revision: 0303
    Charge Information:
    Charge remaining (mAh): 4848
    Fully charged: Yes
    Charging: No
    Full charge capacity (mAh): 5067
    Health Information:
    Cycle count: 116
    Condition: Normal
    Battery Installed: Yes
    Amperage (mA): 0
    Voltage (mV): 12295
    And here is the information on the second battery (ie. the older one, which shipped with the computer):
    Battery Information:
    Model Information:
    Manufacturer: Sony
    Device name: ****
    Pack Lot Code: 0003
    PCB Lot Code: 0000
    Firmware Version: 102a
    Hardware Revision: 0500
    Cell Revision: 0303
    Charge Information:
    Charge remaining (mAh): 2398
    Fully charged: No
    Charging: No
    Full charge capacity (mAh): 3952
    Health Information:
    Cycle count: 429
    Condition: Replace Soon
    Battery Installed: Yes
    Amperage (mA): 336
    Voltage (mV): 12086
    Please keep in mind that the issue with charging happens with both batteries, and the shutdown happened with the second battery with no charge in it.
    Thanks!

  • MacBook Pro Late 2007 Keyboard Cleaning

    I have a Macbook Pro Late 2007 with the older style keyboard and I really want to clean it because there are dust around the keys. I tried spraying compressed air but that only got me so far, so I was wondering is it a good idea to take the keys apart and clean it or is there a better way to do it? If the Apple Store has a service for this then I'd be grateful to bring my laptop in.

    I've taken off notebook keys to replace them - but never removed them all to clean them. I would be a bit nervous doing that as it's fairly easy to snap those caps. You can call the Apple Store to ask - or just make an appointment for a Genius Bar visit and see what they say they can or may do.
    Good luck,
    Clinton
    MacBook Pro (15” Late 2011), OS X 10.??, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

  • Photoshop within Photoshop Elements 11 won't run- MacBook Pro late 2007, OS 10.6.8, 2Gb RAM, 2.2 GHz

    I've installed Photoshop Elements 11 on a MacBook Pro- late 2007, OS 10.6.8, 2Gb RAM, 2.2GHz. The Organizer component launches fine and seems to be working, but Photoshop does not. It starts loading for a few seconds and then quits.

    <moved from Downloading, Installing, Setting Up to Photoshop Elements>

  • What is the expected battery life for a battery in the MacBook Pro (Late 2007)?

    I purchased a replacement battery from an Apple Retailer for my son's 17" MacBook Pro (Late 2007) in December 2009. Last week, he gets a "service battery" message and the battery won't hold a charge. Is this the best we can expect in terms of battery life? It was supposed to be an Apple Battery.

    Has your son been calibrating the battery per the user manual schedule?  Has he been using the computer properly? According to the user manual it states in part:"Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings."
    MacBook Pro: Care, Use, and Safety Information
    "Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn."
    Apple notebook batteries – maintenance and troubleshooting
    http://support.apple.com/kb/HT1446 Apple Portables: Tips for maximizing your battery charge
    http://support.apple.com/kb/HT1490 Apple Portables: Calibrating your computer's battery for best performance
    Maximize the battery life

  • Having problem with MacBook Pro launching mission control without prompting

    Having problem with MacBook Pro, launching mission control without prompting. Please advise. Thank you.

    It may be a swipe that's doing this >  Mac Basics: Mission Control

  • Audio Issues with MacBook Pro (Late 2008)

    I am seeing an occasional issue with my MacBook Pro (Late 2008). The Audio will go out... and instead you will just hear static-like clicking sounds when and audio even happens. For example... when you have the up/down volume notification on... and you change the audio volume.. you hear clicks. Or... when you open up a file that has audio.. you will hear the static-like click when the audio starts to try to play.
    The work around per-se is to completely shutdown and turn the notebook back on. A simple restart does not seem to fix it... it looks like the system needs to have a bit of energy drain first. Which... worries me that this is a hardware issue and not a driver issue.
    Wondering how many others are seeing this???

    I went to and Apple Support Center last week and I asked some questions about audio because my MBP was having troubles too. The tech told me audio issues are very frequent on these machines and sometimes you have to change a part of the soundcard. He also added you have to bring the MBP to a support center if you're having the problem several times - in my case I'm waiting the next "crash" since I had only 2 issues so far... If you're under warranty go for a check up and see if it really needs assistance. Goodbye

  • Focusrite Saffire 6 USB (1.1) with Macbook Pro late 2008

    Equipment-
         Macbook Pro Late 2008 w/ Yosemite 10.10.2
         Focusrite Saffire 6 USB (1.1)
    The Saffire 6 is a audio interface using USB 1.1 to connect microphones to my Macbook. It has 2 inputs and 4 outputs. I've had this unit for years and has worked fine. I realized today that I haven't used it since upgrading to 10.10 (Yosemite) and wasn't able to get it working. When I try to set it within Sound Preferences, all devices, In and Out, go blank, then come back constantly. It will even change Built-In Mic to "Unknown".
    The Saffire website (http://global.focusrite.com/usb-audio-interfaces/saffire-6-usb/downloads) lists two different driver choices to use, but one is labeled specifically for 10.8.5. The other just says "Mac". I'm certain my device is USB 1.1. If it were 2.0, I wouldn't need a driver. According to the website, I should use the 2.9 version.
    How can I check to see if all previous driver installations are clear?
    Is there anything I can check to make this thing work? The Focusrite website (http://us.focusrite.com/answerbase/are-focusrite-products-compatible-with-osx-yo semite) says that the Saffire 6 USB is compatible with Yosemite.
    I've emailed Focusrite and I'm hoping between them and this forum, I can get this working again.
    Thanks!!

    I've spoken to Focusrite. They had me try a number of things. I tried some of my own things.
    Different USB cable
    Deleted VodBurner device
    Repaired Permissions
    Installed/Uninstalled 3ivx codec
    Reset PRAM
    Performed Safeboot
    Removed Startup items
         Growl, Sizeup, Crossover CD Helper, Dropbox
         Disable MagicPrefs from Autostart
    Still not able to get it to work. The device will work on an XP computer but I don't have another Mac to try it out on. Any suggestions?

  • Compatibility of Past-Years Cinema Display with Macbook Pro Late 2011, and other displays.

    Hello.
    I'm inquiring about the compatibility of Apple cinema displays from years past with Macbook Pro 15" Late 2011.
    For instance, will all Apple Cinema Displays from, say, 2008 onwards work with my mbook?
    They can be had fairly cheaply on the used market.
    What is the earliest model that will be compatible?
    I've never had an external monitor for my lappies, so I am very clueless. I know DVI is a common connection, but there is no DVI port on my lappie.
    I would also be very curious as to what would be suitable displays from other manufacturers, particularly Samsung and Dell.
    The size doesn't have to be big, 20-23 inch is fine, I am more worried about good resolution [no obvious pixellation]
    If a screen is big, but has good resolution that's even better of course, but I'm not ****-bent on a big thing.
    The mbook 15" screen is just a bit squashy for home use really.
    Thank you very much in advance for any advice.
    Feel free to link me to other threads as an answer, I have done a bit of searching around, but still confused.

    I have the same MBP and recently bought a 23" cinema display on Craigslist for $140.  It works great.  I had a display port to DVI adapter and it worked fine.  Built a stand to hold the laptop vertically so it's out of the way.  Don't know about older displays but anything with DVI should work fine.
    The screen size and resolution are great for photo editing.  I now have the best of both worlds, a display that rivals my wife's iMac and portability.

  • Blue tooth issues with macbook pro late 2011

    I purchased the new beats pill and havinng issues with connectivity with macbook pro. My Iphone works well. Any suggestions

    I have a similar issue.  Have you had any luck with a fix, yet?  I have a Samsung sound bar, and my Ipad and Iphone both connect with no issues. The playback is uninterrupted with fine sound quality.  My 2011 13" Macbook Pro connects, however playback often sounds like a scratched CD.  Last year I called both, Samsung and Apple, and when all was said and done it was recommended that I bring the then brand new sound bar and my Macbook to an Apple Store.  Any suggestions I are appreciated.

Maybe you are looking for

  • External hard drive to run windows?

    I have recently gotten a macbook pro and, as a student, I will occasionally need to run windows applications such as office etc.. I have considered buying an external USB HD to do this with. Questions: 1. Will an external hard drive work to run windo

  • SOAP receiver inactive problem

    Hi Gurus, I am using a SOAP receiver channel, I actived this SOAP CC in ID , but when I go to RWB and goto Communication Channel monitor, found the SOAP receiver channel status is "Channel started but inactive" with a yellow triangle. Our XI version

  • ITunes can't sync photo to both 160GB iPod Classic and 16GB iPhone 3g?

    I had the Classic for some time, and never had a problem sync'ing photos. Then I added an iPhone, and I received the infamous "insufficient permissions" sync error. Per unwritten SOP, I deleted the "iPod Photo Cache" folder from the *iPhoto Library*

  • Problem with standalone resource-adapter

    Hello, I have problem with excluding standalone resource adapters from enterprise applications on OAS 10.1.3.4. Because collection of standalone resource adapters can change dynamically (release of new versions, creation of new environment), I cannot

  • Seeburger BIC module

    Hi all, I am using seeburger BIC module to convert XML file to EDI. My question is, can we configure BIC module parameter "srcDelimiter" dynamically rather than supplying any value? Thanks