Problem with MacBook Pro keyboard backlight after migrating from pb dlsd

Can anybody help please? I\ve got this very annoying problem where the keyboard light doesn't work properly in my main user a/c which I migrated in from my powerbook 1.67. Ir is obviously something to do with imported library settings but I can't find how to get it to work properly - new user a/cs set up on the mbp work as they should. Unfortunately I have a n enormous pile of configurations which I need to continue using from my old a/c

How old is your MacBook Pro? If it didn't ship with 10.4.10, then maybe you can run the 10.4.10 combo updater for Intel over again:
http://www.apple.com/support/downloads/macosx10410comboupdatev11intel.html
If it did ship with 10.4.10, sometimes hardware issues like these can be repaired by a simple zap of PRAM:
http://docs.info.apple.com/article.html?artnum=2238

Similar Messages

Problem with macbook pro keyboard - MID 2011

Hi all, I have problems with my macbook pro keyboard.
I have several keyboard letter that bother me, the letters are e,y,d,h,c & n
When I hit letter 'e', it will come out as 'ey'..
When I hit letter 'y', it will come out as 'ey'..
When I hit letter 'd', it will come out as 'dh'..
When I hit letter 'h', it will come out as 'dh'..
When I hit letter 'c', it will come out as 'cn'..
When I hit letter 'n', it will come out as 'cn'..
please help me out..?

If it turns out to be a hardware problem with the keyboard and the repair is done through Apple, be prepared for a sticker-shock price to fix it. The problem is that Apple considers the keyboard as an integral part of the top-half of the aluminun enclosure (it's called the top case & is CNC milled and quite complex)...to Apple, it is considered one-piece and one part number (top case). The keyboard is held onto the top case with many (~60) very tiny screws and this entire top case is the part that will be replaced. They will NOT replace only the keyboard.
I had the power button quit on my Late 2011 MacBook Pro 13". To fix it through Apple would've cost well over $500. The power button is part of the keyboard assembly (it's not removable from the keyboard and uses the same flex cable assembly) so the keyboard itself needs to be changed. I found the exact replacement keyboard on eBay for ~$30 and changed it myself. There is absolutely nothing trivial about replacing it. It was a huge pain in the butt, especially swapping the keyboard on the top case with all of those teenie-tiny screws. It took me the better part of a day to do it but I've had experience with this type of work for at least 20 years now. If I need to do it again for some reason, it will likely be quicker.
Just beware that a repair could cost some big bucks, even if it's only "just the keyboard".

Problems with Droid Pro keyboard backlight problem

The keyboard backlight on the Mororola Droid Pro goes out when it is totally dark ever since OTA to 2.3.3. Any suggestions for a fix (don't say battery pull, yada, yada (doesn't work), or click home twice then backspace (not a true fix, but a workaround) or rooting the phone (doesn't fix). Seems to be a software glitch. Backlight qworked well in 2.2.

Why cant Verizon pushout OTA update to fix the problem instead of making all of us come to the store for a reflash? It would make more sense IMHO.
John
JohnB_VZW wrote:
I understand your frustration and I'm here to help.
I have researched the issue with the backlight on the Droid Pro and found that other user have had this same issue after the software update. Other users have found that performing a hard reset and then taking the phone into a store and having the device software flashed has fixed their issue with the backlight. I suggest you try the hard reset and then take your phone in to a VZW store to have flashed.
If you continue to have issues after the hard reset and flash, please post back and I will be more than happy to further assist you.

Problems with MacBook Pro keyboard

Several months ago I spilled sauce on my keyboard and several keys became difficult to hit. Since then I have been using a Bluetooth keyboard with no problems. Now, the last several days, the original keyboard has been causing many issues: cannot scroll with external mouse, cannot open links in Safari and same links in Chrome go to brand new windows, and rebooting my computer has put it in safe mode where I can't access many things. Is there something I can do to disable the old keyboard or would I need to take it in to be fixed?

Before assuming the problem is with the keyboard itself, I'd be wondering about the ribbon cable that connects it , IvanBaby.
Have a look at http://jasonrobb.com/2008/11/24/macbook-pro-unresponsive-keyboard-trackpad-solut ion/ and at THIS PAGE TOO
An earlier Apple Discussions thread on the issue can be found at http://discussions.apple.com/thread.jspa?messageID=8514656#8514656
Cheers
Rod

My macbook pro keyboard backlight won't turn off, even after pressing F5

my macbook pro keyboard backlight won't turn off, even after pressing F5

Try resetting the SMC http://support.apple.com/kb/ht3964

I have a problem with macbook pro OS 10.5.8 and cannot play youtube anymore, before Yes

i have a problem with macbook pro mac os 10.5.8 and cannot play youtube but before ther is no problem abou this. now there is warning sign to install adobe flash player, but when i install adobe it said cannot be compatible, and I went to the apple store, they sid need to upgrade the system to mac IOS 10.6 and i dont want to spend much... somebody to help me this

Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mavericks if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s iCloud services; fees and
           terms apply.
Upgrading from Snow Leopard to Lion or Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mavericks- System Requirements
       Macs that can be upgraded to OS X Mavericks
         1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
             Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
         7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
         See App Compatibility Table — RoaringApps.
Upgrading to Lion
If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
This, Adobe Flash Player 12.0.0.70, is the current version of Flash. It should work with Snow Leopard or later.

Having problem with MacBook Pro launching mission control without prompting

Having problem with MacBook Pro, launching mission control without prompting. Please advise. Thank you.

It may be a swipe that's doing this > Mac Basics: Mission Control

Only part of my macbook pro keyboard backlight works

only part of my macbook pro keyboard backlight works , all settings and f6/7 keys work ok but only a triangle in the centre lights up, so the rest of the keyboard is dark.
Pleqase someone shed some light.
Bought in May 2012

It is likely a hardware defect. If you bought it in May of 2012, it is still under warranty. Take it back to the store or mail it in to be fixed.

I have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small, how do i full disconnect my laptop?

i have just used air display with macbook pro. i have disconnected now from apple tv. but my laptop screen is still very small like its connected to the tv. this means all the tabs and writing is very small. like the display down the bottom where al the applications are, is n the middle of the page and not spread down the bottom. this is seriously annoying! all the writing is every small and the tabs are small and its hard to read. the air display link has disappeared from my computer. but the laptop screen is still very small. i want to know how do i get rid of this and return my macbook screen to its normal size. thank you

Hello chrispyw,
If your content is still being displayed incorrectly, I would check the resolution setting for the built in display with this article:
OS X Yosemite: Adjust your display’s resolution
If it keeps happening whenever you use AirPlay then I would use this section of the following article to reset the display system:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
Thank you for using Apple Support Communities.
Regards,
Sterling

External Hdd problem with macbook pro 13" i5

I bought a extern hdd last week and i have detect that it doesn´t initialize when my early macbook pro 13" i5 come back from sleep or i turn on the mac. I must reconnect the hdd´s usb cable. My question is... Thats it normal?

Very true that if you don't see it in Disk Utility, you also won't see it on the desktop.
It sounds like you have an intermittent contact somewhere. It might be worth trying a different cable and a different port. Also try that cable with some other device.
No idea if the problem is with the drive's port, the Mac's port, or the cable, but you might be able to chase it down by trial and error. It may be something like a cable that is not fully engaged in the port and not making good contact.

Macbook pro screen dims after waking from sleep?

Does anyone know why my macbook pro screen dims when waking from sleep or waking from my screen saver? I can't get it to stop doing this. Thanks.

It sounds like I have the same thing happening. It's more like the colors are washed out, like there is less contrast. I have a hot corner set up for my screen saver. Once I activate the screen saver for a second and then deactivate it, the Macbook screen goes back to normal. I have a 30" Samsung 305T monitor set up as a second (main) screen for when I'm working at home, which is most of the time. I haven't had it unplugged from the Macbook since this started, so I don't know if it happens by itself. I do know that the Samsung looks fine when waking up from the screen saver at the same time.
I tried to find others with this problem in this forum, but got tired of looking through all the other posts that had nothing to do with this problem.
Can anyone help us?

Problem with Macbook Pro early 2011, webcam not working in any apps and windows 7 or 8 on bootcamp, keyboard backlight not working?

Hi Guys
I recently bought a second hand early 2011 Macbook Pro 15 inch and are having 2 problems. The first is that none of the apps detects my webcam at all, the second is, i have Windows 8 installed on bootcamp but are unable to get the keyboard backlight to work in 7 or 8. The backlight works perfect in os x 10.8.5 though. I need a little bit of help guys.....

Go to Apple Menu / About This Mac. Click on More Info ... next on System Report. In the left hand column, under Hardware, select USB. The right side will show the USB Device Tree. Look through that and check for "Built-in iSight". That is your camera. If it is not listed the camera is not working.
For backlighting, try this: go to System Preferences / Keyboard. Uncheck "Adjust keyboard lighting in low light".

Problems with MacBook pro with no return.

I bought a new MacBook Pro 13" with Retina Display and installed iWork & iLife using the original DISC obtaied for the software. I istalled update 9.1 and 9.3 as suggested by the Apple councilar. I have several documents created with the iWork applications. I get the message "The document-title-cound't be opened". All othe software i installed from third parties work with out problems. It quite disappointing to dela with this problem evenafter two long time conversations with the Apple agents. Moreover, the transfer of files from my old MacBook Pro did not work well as well. I had been forced to erace my hard disk and reinstall the OS 10.8 and the updtes 10.8.1 and 10.8.2. The other problems with the new acBook Pro are the insbility to transfer the data complete fromthe old Mac Book Pro by which I lost all my music, Photo and Video fies. These files were created for the past 10 years and I feel that the purchase of the MacBook Pro was unnecessary burdon and loss of confidence in the Apple system and company.
No repair mechanism is available and they need only the registration of the software etc.
A sad state of affair and may be time that it will start going down following teh "Newton's" low. Everything goes up has to come down!!!!!

I'm sorry but we can only go on what you post and given that, I had to ask if you spoke English so I could respond appropriately.
You say you have OSX 10.6.7 but also say you have just bought a new MacBook Retina which indicates that is not correct.
If you used Migration Assistant, your documents, email, settings and most of your software should have transferred OK. The iWork unfortunately is not one of the software that does neatly transfer, which is Apple's fault. Usually it is best to do a completely new reinstall from the installer DVDs, and update, none of which would affect your documents.
If the Migration failed it would be useful for you to explain what exactly you did and what happened. At the moment your post is simply a complaint with no details. No details leaves us completely guessing, and given your post, makes us suspect you did not understand what you were doing.
Not a help after the event, but are you aware of Carbon Copy Cloner and SuperDuper? Both let you archive your previous installations so you can go back to them if there is a problem.
Peter

Problem with Macbook Pro 15 (Late 2007)

What I did is that I tried to install a 500gb threw the macbook. Then suddently, the macbook pro did not wanted to reconize the gb that I put in. I tried all the shortcut keys and none of them work. It only stayed with a Apple Logo with the circle on the bottom spinning. It freezes sometimes. I tried everything, & it still freezing and did all the trick.
Yesturday, It did not decided to turn on. The screen did not want to turn on. The blinking light on the bottom did not want to turn on also. I clicked on the power on but it actually turned on but the screen and the blinking light did not wanted to turn on. I tried on the keyboard, & it did not wanted to turn on the lights. I tried everything my best to get it back working.
Please help me with this problem. Maybe for me I think its the logic board. I'm not sure because once I got it, It was working 100% except for the apple and circle on the bottom spinning.
Thank you for reading and helping,
DaddyCorrupted

You must first prep the new drive then install OS X on it:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

Problems with Macbook Pro sleep

Hey guys, I'm currently hacing issues with my Macbook Pro going to sleep when left for the ammount of time specified in Energy Saver. I set the times (with power cord plugged in) to 1 minute for display sleep and 2 minutes for computer sleep, after 1 minute the display dimmed and then blacked out as it should have done, but the computer itself did not sleep at all even after being left for over 5 minutes.
I have tried rebooting and shutting down and the problem is sitll there, if anyone can help me I'd greatly appreciate it!
My macbook is early 2011 and I'm running Mountain Lion.

Thanks for the help, I have read this but still can't locate the problem, I have looked in activity moniter for background applications, I have no external drives either. It sleeps fine when I select sleep from the menu but does not auto sleep in the time from energy saver.
I have ben through the checklist at the bottom of that page, I have bluetooth turned off, file sharing off, no external mouse/keyboard either.

Problem with MacBook Pro keyboard backlight after migrating from pb dlsd

Similar Messages

Maybe you are looking for