Problem with machine rebooting. Essbase 11.1.1 installation.

Hi all,
I have a problem with my Essbase 11.1.1 installation. In a nutshell when I reboot the machine I can't log in EAS anymore. The only way I found out is just reconfigur EPM system after rebooting but It's just a work around.
Thanks for helping

Hi user,
AsI read between lines, it seems that you previously were able to access EAS so your installlation is not the problem but you accessing to EAS isthe problem. As you mentioned you are having problems accessing it after rebooting the server, I think it could be a prolem with the services. Please try stopping all the services in this order:
administration servicese
Essbase services 11.1.1.1_Hypservice_1
Foundation
Openldap
and then restart them from bottom to top. Let me know.
J.

Similar Messages

Problems with System Update 3.14.0019 after installation SP2

Have you encountered problems with System Update 3.14.0019 after installation SP2 for Windows Vista?
After this upgrade I view this error: "An error occurred while gathering user information."
Thanks for the help

A known issue. It wasn't supposed to be supported until SP2 is RTM. However, look at the stickied post in the forum for some bad news about SU.
x61s

Problems with spontaneous reboots with K7t266 Pro-RU

I have been having problems with this board for about six months. I recently installed the same board into another system and still have the same issues.
The system powers-on spontaneously after shutdown. I have checked that there are no "wake on LAN settings" enabled in the BIOS. The same problem occurred in two different systems with the same board. It happens anytime overnight.
I am running Windows and Office XP with current Service Packs
AMI BIOS A6380MS V1.8 010202
Most recently I installed the board in a new case and re-installed windows XP from scratch. The stand by button is grayed out when I select Windows turn off computer. When I shutdown the computer it simply restarts and does not shutdown properly.
I purchased the motherboard in September 2001. I tried running the RAID array with two IBM Deskstar model IC35L040AVVA07-0, 40 GB hardrives. The RAID array would fail after a few weeks to a few months of use. I damaged both drives while trying to recover from these failures and could not repair the drives even with a low-level format. I finally gave up and stopped using the RAID.
I have not upgraded the bios on the Promise RAID chip.
Has anyone else had so much problems with this board?

Quote
Originally posted by Bas
Hi,
Make sure you have IPCA turned on.
APM turn it on.
Turn USB Wakeup off
Turn Restore on AC/Powerloss off
Turn WakeUp on Ring off
Turn WakeUp on PME off
Turn Resume by Alarm off
That should do the trick...
Thanks for that. I had all these settings as described above but was still getting the spontaneous reboots. Actually I have narrowed it down to it occuring only when I have another PC on my LAN, but Wake up on LAN is definitely disabled.

Problem with J2RE 1.4.2_02 or 03 Installation

Hi!
I have a problem with the j2re 1.4.2_02 or 03 silent installation:
everytime the setup starts "patchjre.exe" it displays the warning "Java(TM)-Update (1.4.2_03-b02) cannot be installed on this workstation because the Java(TM) Virtual Machine is already running..." - retry or cancel.
If i click 8 times "retry" the setup will continue and everything is fine.
No browser or other java apps are running!
what can be the problem?
thanks
oliver

I was having this problem as well. I extracted the MSI from the InstallShield and found that it's looking for a property called "SystemFilesLocked" to equal 1. If you pass it as a parameter and give it a value of 0, this error message doesn't appear. I've installed now to 15 W2K desktops without any issues.
The 'silent installation' documentation for this product is sorely lacking. The install string I'm using is below:
j2re-1_4_2_03-windows-i586-p.exe /S /v/qn"ADDLOCAL=jrecore SYSTEMFILESLOCKED=0 CONTROLPANELLOCKED=1 SKDSILENT=1 IEXPLORER=0 SYSTRAY=0 REBOOT=Suppress JAVAUPDATE=0 JAVAJAVAWLOCKED=0 WEBSTARTICON=0 /L C:\TEMP\LogFiles\JRE_JWS_142_03.log"
Hope this helps...

An IVR Application Solves All Problems with a Reboot: Problem Is to Prove The App Is Causing the Reboot

A machine, that is dedicated to running an IVR application, is supposed to be available to take customer telephone inquiries 24/7. Sometimes the computer reboots itself, without taking a dump. The problem is to prove to the commercial IVR application developer
that their SKU is responsible for the reboot. As Windows neglects to log such events, I'm in a quandary. The IVR application also doesn't log its attempts to reboot the computer. We are running ProcMon, which may catch somebody in the act. So far there
hasn't been the lucky coincidence of ProcMon running and a reboot event.
MARK D ROCKMAN

Here is the content of an event log that seems pertinent:
The process C:\WINDOWS\system32\winlogon.exe (P15) has initiated the restart of computer P15 on behalf of user P15\Ugen for the following reason: No title for this reason could be found
Reason Code: 0x500ff
Shutdown Type: restart
Comment:
Well, that's pretty disappointing. It names some operating system process that is instrumental in the restart. It tells what computer is being restarted. It tells what user logon account apparently initiated the restart, but not which application.
And it fails to interpret the Reason Code which is "I don't know what." Presumably a BSOD wouldn't look much like this. I wish the writers of this dreck would face facts and state the obvious. No pussyfooting around. If application
X with logon id Y asks for a reboot then say so.
MARK D ROCKMAN

I have problems with sporadic reboots

I have had numerous reboots with panic attacks, it's giving me panic attacks as well. Here is the dump that came back after one of the crashes I experienced.
Anonymous UUID:       FD55ADF6-6EFB-E243-C099-8C67839E58D1
Wed Apr 15 13:08:46 2015
*** Panic Report ***
panic(cpu 0 caller 0xffffff7f8bf24bdb): "GPU Panic: [<None>] 3 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xd2000000 0xffffff8124c2d000 0x0a5480a2, D0, P2/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.10.22/src/Appl eMuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff8112b130f0 : 0xffffff800912bda1
0xffffff8112b13170 : 0xffffff7f8bf24bdb
0xffffff8112b13250 : 0xffffff7f89ee8b9f
0xffffff8112b13310 : 0xffffff7f89fb218e
0xffffff8112b13350 : 0xffffff7f89fb21fe
0xffffff8112b133c0 : 0xffffff7f8a231056
0xffffff8112b134f0 : 0xffffff7f89fd582d
0xffffff8112b13510 : 0xffffff7f89eef5f1
0xffffff8112b135c0 : 0xffffff7f89eed0fc
0xffffff8112b137c0 : 0xffffff7f89eee07a
0xffffff8112b138a0 : 0xffffff7f8b467446
0xffffff8112b138e0 : 0xffffff7f8b476dff
0xffffff8112b13900 : 0xffffff7f8b4a5493
0xffffff8112b13930 : 0xffffff7f8b4a54ed
0xffffff8112b13970 : 0xffffff7f8b47ca1f
0xffffff8112b139c0 : 0xffffff7f8b447027
0xffffff8112b13a60 : 0xffffff7f8b442da1
0xffffff8112b13a90 : 0xffffff7f8b440873
0xffffff8112b13ad0 : 0xffffff80096ff70c
0xffffff8112b13b60 : 0xffffff8009701863
0xffffff8112b13bc0 : 0xffffff80096ff0c3
0xffffff8112b13d00 : 0xffffff80091e21e7
0xffffff8112b13e10 : 0xffffff800913000c
0xffffff8112b13e40 : 0xffffff80091149f3
0xffffff8112b13e90 : 0xffffff800912531d
0xffffff8112b13f10 : 0xffffff80092031ea
0xffffff8112b13fb0 : 0xffffff8009235396
      Kernel Extensions in backtrace:
         com.apple.driver.AppleMuxControl(3.10.22)[26F693CB-BFE8-33FA-9D1F-3F66FC016768] @0xffffff7f8bf16000->0xffffff7f8bf29fff
            dependency: com.apple.driver.AppleGraphicsControl(3.10.22)[61967104-88AF-3605-82F5-A480A280 0A78]@0xffffff7f8bf0e000
            dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7f89cbb000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7f89924000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[82EAD591-67E3-39CB-A232-A8095CA30E92]@0 xffffff7f89e41000
            dependency: com.apple.driver.AppleBacklightExpert(1.1.0)[65E3187E-949B-36E9-BA33-1B13ABB058 1A]@0xffffff7f8bf11000
         com.apple.nvidia.classic.NVDAResmanTesla(10.0)[796AE430-39FB-3255-8161-D52AFA28 EE2B]@0xffffff7f89e98000->0xffffff7f8a101fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7f89924000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[C0B8A85D-B32A-3F24-B4FC-B62B3BBF9E57]@0xff ffff7f89e88000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[82EAD591-67E3-39CB-A232-A8095CA30E92]@0 xffffff7f89e41000
         com.apple.nvidia.classic.NVDANV50HalTesla(10.0)[7FE40648-F15F-3E18-91E2-FDDDF4C DA355]@0xffffff7f8a10c000->0xffffff7f8a3b5fff
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(10.0.0)[796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f89e98000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7f89924000
         com.apple.GeForceTesla(10.0)[5D1B0BFD-2642-35FD-AD39-C0652DA082E8]@0xffffff7f8b 424000->0xffffff7f8b4f1fff
            dependency: com.apple.iokit.IOPCIFamily(2.9)[52E715FC-521D-3869-B2EA-5228FA4BEA34]@0xffffff 7f89924000
            dependency: com.apple.iokit.IONDRVSupport(2.4.1)[C0B8A85D-B32A-3F24-B4FC-B62B3BBF9E57]@0xff ffff7f89e88000
            dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[82EAD591-67E3-39CB-A232-A8095CA30E92]@0 xffffff7f89e41000
            dependency: com.apple.nvidia.classic.NVDAResmanTesla(10.0.0)[796AE430-39FB-3255-8161-D52AFA 28EE2B]@0xffffff7f89e98000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
14D131
Kernel version:
Darwin Kernel Version 14.3.0: Mon Mar 23 11:59:05 PDT 2015; root:xnu-2782.20.48~5/RELEASE_X86_64
Kernel UUID: 4B3A11F4-77AA-3D27-A22D-81A1BC5B504D
Kernel slide:     0x0000000008e00000
Kernel text base: 0xffffff8009000000
__HIB text base: 0xffffff8008f00000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 10331586813817
last loaded kext at 1052934444048: com.apple.filesystems.smbfs 3.0.1 (addr 0xffffff7f8c05a000, size 389120)
last unloaded kext at 1121584134574: com.apple.driver.AppleUSBCDC 4.3.3b1 (addr 0xffffff7f8c00d000, size 16384)
loaded kexts:
com.apple.filesystems.smbfs 3.0.1
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.iokit.IOBluetoothSerialManager 4.3.4f4
com.apple.driver.AudioAUUC 1.70
com.apple.driver.AGPM 110.19.5
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 272.18
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.GeForceTesla 10.0.0
com.apple.driver.AppleHDA 272.18
com.apple.driver.AppleSMCLMU 2.0.7d0
com.apple.driver.AppleIntelHDGraphics 10.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.4f4
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleIntelHDGraphicsFB 10.0.0
com.apple.driver.AppleMuxControl 3.10.22
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 36
com.apple.driver.AppleUSBCardReader 3.5.5
com.apple.driver.AppleIRController 327.5
com.apple.iokit.SCSITaskUserClient 3.7.5
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.1
com.apple.driver.AirPort.Brcm4331 800.20.24
com.apple.driver.AppleUSBHub 705.4.2
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.iokit.AppleBCM5701Ethernet 10.1.3
com.apple.driver.AppleAHCIPort 3.1.2
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.iokit.IOSerialFamily 11
com.apple.AppleGraphicsDeviceControl 3.10.22
com.apple.kext.triggers 1.0
com.apple.nvidia.classic.NVDANV50HalTesla 10.0.0
com.apple.nvidia.classic.NVDAResmanTesla 10.0.0
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.DspFuncLib 272.18
com.apple.kext.OSvKernDSPLib 1.15
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOSurface 97.4
com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.4f4
com.apple.iokit.IOBluetoothFamily 4.3.4f4
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.AppleHDAController 272.18
com.apple.iokit.IOHDAFamily 272.18
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.driver.IOPlatformPluginFamily 5.9.1d7
com.apple.driver.AppleGraphicsControl 3.10.22
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.driver.AppleSMC 3.1.9
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.driver.CoreStorage 471.20.7
com.apple.iokit.IOUSBMassStorageClass 3.7.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.5
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5
com.apple.iokit.IOAHCISerialATAPI 2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5
com.apple.iokit.IO80211Family 730.60
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOEthernetAVBController 1.0.3b3
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.iokit.IOUSBFamily 720.4.4
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Unable to gather system configuration information.Model: MacBookPro6,2, BootROM MBP61.0057.B0F, 2 processors, Intel Core i5, 2.4 GHz, 8 GB, SMC 1.58f17
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334248312D4346382020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1067 MHz, 0x80CE, 0x4D34373142353237334248312D4346382020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.24)
Bluetooth: Version 4.3.4f4 15601, 3 services, 27 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS545032B9SA02, 320.07 GB
Serial ATA Device: MATSHITADVD-R   UJ-898
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Internal Memory Card Reader
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:
Any help would surely be appreciated

The problem is likely due to the discrete GPU failing. Download gfxCardStatus 2.3 and use it to disable the discrete GPU. This is a temporary workaround until you get your motherboard replaced.

Lion: problems with resume, reboot, move, delete ...

Some of the Lion problems I've been having (on 2 laptops: an older "Pro" and a new "Air"):
          -can't delete some files without password;
          -can't move some files or folders, only copy;
          -opening a program by clicking a data file also opens other data files from previous uses (not necessarily the most recent use);
          -rebooting opens several programs, always the same ones with the same data files (not necessarily from the most recent uses);
          -opening Safari opens several tabs always with the same sites;
          -Safari's History is gone, except for 2011 items, and new items are not being recorded;
          -Keychain issues, often needing repair;
          -MobileMe syncing issues.
Why and how do all of these things happen? How are they related to each other? Why should I have to tinker like this? And what would happen if I weren't geeky? (I've left my iMac on Snow Leopard, which is wonderful.)
Things are coming under control, but I have pulled all sorts of information from a variety of Web sources, none of which I found all in one place; hence this compendium. The exact sequence of what I did is lost, and what factors were the ones which worked I do not know. (Very time-consuming …) Comments welcome!
Should I just have re-installed Lion on the laptops?
====
Permissions:
A lot of these problems seem related to obscure permissions.
Here is a Terminal command which clears all ACLs, at least in the "Home" folder.
          chmod -R -N ./*
(But it generated this message on the MBPro:
chmod: Failed to clear ACL on file abc.numbers: Operation not permitted
chmod: Failed to clear ACL on file Commands: Invalid argument
chmod: Failed to clear ACL on file Notification: Invalid argument
chmod: Failed to clear ACL on file ubiquity.socket: Invalid argument
chmod: Failed to clear ACL on file Saved Application State: Operation not permitted
… partly perhaps because I had "locked" the abc.numbers file and the Saved Application State folder. I doubt if these things matter.)
Reboot while holding Cmd-R: this is something like "re-install" mode; when it opens, instead of choosing one of the options presented, open Terminal from the Utilities menu, and type "resetpassword". A program opens but don't reset the passwords, but rather reset all of the permissions, including ACLs, using the button at the lower right. Close it, close Terminal, and the reboot normally.
Safari:
File menu, Empty Cache and Reset Safari
Library (from Home folder, requires special steps to get to it in Lion, e.g. hold the Option key when at the Finder "Go" menu):
          Library/Preferences: moved then later deleted several plist files for offending programs, which I then had to reconfigure (e.g. Safari: reconfigure Toolbar, go through Safari Preferences …) -(they will all reappear instantly in some "default" state) -trying to delete the plist.lockfile as well caused problems - Trash wouldn't "empty" it ("in use"), but doesn't seem to matter.
          Library/Preferences, ByHost: see below
          Library/Saved States: see below
ByHost:
Some users opine to go to ByHost, close all apps, then "lock" (using the "Get Info" feature) the file com.apple.loginwindow{…}.plist. See this "discussion: https://discussions.apple.com/message/17213577#17213577
Saved States:
Some users say to delete "Library/Saved Application State" files (folders) before doing the above (https://discussions.apple.com/message/17499355#17499355 and http://applehelpwriter.com/2011/09/13/turn-off-resume-the-definitive-solution/). Then "lock" the "Saved Application State" folder. There may be some problems getting it to stay locked(?).
But I moved several of the "Saved Application State" folders and I forget just what, but one computer seemed unhappy afterwards, the other fine. On the unhappy one, I replaced them (but not yet having locked the overall folder), and deleted some of the files inside the individual folders, like com.apple.TextEdit.savedState. (I suspect this paragraph is unimportant, but cannot be sure.)
Sharing: remember that the settings under System Preferences, Sharing, also matter. (So do the settings under "Accounts and Users", Guests.)
The "resume open applications feature" on reboot seems weird. If I say "no", I wonder if it wasn't bringing back all of the programs from some distant previous reboot.
Make sure that under System Preference, General, the option to restore on restart is unchecked.
I have learned that Disk Utility's "Repair Permissions" works for quite specific files and doesn't work for the Home folder.
http://support.apple.com/kb/HT1452
Make sure that there aren't numerous "Login" items under System Preference, Users/Accounts.
Changing permissions via the "Get Info" windows, and "applying to enclosed folders" can be a bad idea, especially if applied to something like the Home folder. Apparently it propagates ACLs too(?), although not visible there, and the effects can be undesirable.
Some permissions on "Get Info" panes have two "everyone"s, and the one with "Custom" settings can not be changed nor deleted.
Make sure all systems updates have been done (as usual).
MobileMe sync issues are another story - seems to be settling - perhaps related to "Permissions" issues above …
And what about Preferences, Caches? Anything there that would help with the above problems? What about the "root"(?) Library?
Some of the above tasks can be accomplished by 3rd-party software, but I'm getting there without using anything other than native Mac OS X Lion tools.
====
Anyway, as said, it's all settling down.
Comments/corrections most welcome.
Charles

Boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

Problems with dynasight queries (Essbase goes fast)

Hi, we use dynasight tool to retrieve the data. The time of queries shown in app. window are fast, but we think dynaserver has problems, maybe in sharing the cache memory although this is up to 2 GB and essbase doesn't take more than 600 MbThanks a lot

Hello,in principle, the performance of dynaSight should be more or less identical to the performance you get from an equivalent query from within the Excel Add-In for example. Therefore, the performance problem is very likely due to the specific design of the dynaSight documents/screens.Please check the following:- hierarchy objects configuration:is 'request other levels when expanded' used for the vertical and horizontal hierarchy objects? Depending on the use and type of query this feature may speed up performance significantly.- are you using individual selections?If yes: are you using more than 99 members in an individual member selection (this is the limit on the Essbase Side: if you exceed that limit, dynaSight will query the complete hierarchy and filter out the selected members)- optimize the screens by for example consolidating multiple queries / database calls into one query / database call.=> these are just a few suggestions to look into. In general, I would strongly suggest to contact [email protected] and provide them with some application components and trace and log files so the design issues can be analysed and identified more specifically.Best RegardsAndreas [email protected] of Competence Center

Problem with Business rule-Essbase Error(1042017):

Hi,
I am getting the following error when i run this business rule specifically.
Detail:Cannot calculate. Essbase Error(1042017): Network error: The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again.
I dont get this error with any other rule. I have checked the solution provided in this link
_[http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_error/erhelp.htm#ercalc.htm]_. But this solution wont help because i dont get this error in any other rule.
The rule i run is
"Depreciation Value" = "Cumulative.Asset value"/ ("Assumptions_Programs"->Jul->@UDA(Entity,@NAME(@CURRMBR(Location)))->@UDA(Location,@NAME(@CURRMBR(Location)))->"Assets life in months");
The functions in the above rule will get replaced as below
"Depreciation Value" = "Cumulative.Asset value"/ "Assumptions_Programs"->Jul->IND_Assumptions->LOC_IND->"Assets life in months";
If i hardcode and run, i dont get this error. Please help.
Regards,
Ragav.

The reason it works when you hard code it and why it doesn't when use UDA is simply that you should never have a multiple answers in a cross dimensional. @UDA function returns multiple answers. Even if for your case it only brings back one I believe it is tripping up the calculation. Worse if you are actually bring back multiple answers for @UDA that is definitely not going to work.
I would have to understand all your fixes above the calcultion to recommend you the best possible solution. But at least you understand why you are getting the error and what you have to fix

MOVED: 785GTM-E45 Problems with constant reboot and other stuff - My first ever build!

This topic has been moved to AMD64 ATI/SiS/VIA boards.
https://forum-en.msi.com/index.php?topic=149942.0

Yes, 20 + 4 plug in connected as is the 4 pin CPU plug. Sound issue is now resolved. I deleted the sound drivers and windows reinstalled so that's fixed.
More on the reboot problem. It really only seems to happen when the PC is sitting idle. If suring the net or playing a game, it seems to work fine. I was loading a program earlier today that kept failing because windows would reboot duing the install. I finally opened up a web browser and left it on Pandora and the install went flawlessly... I guess this PC does not like to be ignored...
Last night, I did not touch the PC and it would simply reboot about every 10-20 minutes and show a message that it recovered from a serious error.

Problems with Yosemite (reboot and choppy screen image)

I recently upgraded to Yosemite. I have a MacBook Pro Retina 15" and am running 10.10.2
In all my years of using OSX I think I have been forced to do a hard restart MAYBE 6 times. Ever. And I've been here from the beginning of OSX and before. Since updating maybe two or three weeks ago I have had to hard restart about a dozen times. I am disappointed. The computer becomes non-responsive, yet I don't see the spinning beachball. It just - freezes. I hold down the power button and chug along until the next time.
Additionally, occasionally when using safari the screen gets kind of separated. For instance, if I click on something to go to a new page, part of the screen remains on the old screen and sort of flashes back and forth from old screen to new screen. IDK if that makes any sense. I've not been able to figure a pattern as of yet.
I'd like to know if anyone else is experiencing such oddities. Also, if anyone has any idea what I can do about these problems I'd be happy to entertain them.

You can also try the Safe Mode to reset things.
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - About
Safe Mode - Yosemite

Problem with configuring Hyperion Essbase 1111

Hi, I ve installed Essbase and foundation services and everything went fine, but after validation system found 3 mistakes:
Hyperion Foundation
FAILED Database Connection to database
Error: java.net.UnknownHostException: POL-MPIKULSKI\SQLEXPRESS: POL-MPIKULSKI\SQLEXPRESS
Recommended Action:

Hi,
Whenever I have installed on SQL express I have not had to put in the \SQLEXPRESS
Maybe you installed SQL express using SQLExpress as the instance instead of selecting default instance, this could be the issue.
Cheers
John
http://john-goodwin.blogspot.com/

Severely problem with SUN HBA card SG-XPCI2FC-QF4 installation

Hello:
I'm facing a big problem when installation SUN HBA card,the machine can't recognise the HBA card when poweron with HBA installed,
my system is:
Server: SUN V890, Solaris 10
HBA: SG-XPCI2FC-QF4
I changed another HBA card and I/O solt,the problem again,
errors following:
This is the only error i got ,please help out,thanks.
/var/adm/messages:
Nov 9 01:21:51 N2000Primary genunix: [ID 936769 kern.info] mc-us35 is /memory-controller@5,400000
Nov 9 01:21:51 N2000Primary rootnex: [ID 349649 kern.info] mc-us36 at root: SAFARI 0x6 0x400000 ...
Nov 9 01:21:51 N2000Primary genunix: [ID 936769 kern.info] mc-us36 is /memory-controller@6,400000
Nov 9 01:21:51 N2000Primary rootnex: [ID 349649 kern.info] mc-us37 at root: SAFARI 0x7 0x400000 ...
Nov 9 01:21:51 N2000Primary genunix: [ID 936769 kern.info] mc-us37 is /memory-controller@7,400000
*Nov 9 01:21:51 N2000Primary pcicfg: [ID 756804 kern.warning] WARNING: failed to allocate 256 bytes for dev fibre-channel BASE register [0x10]*_
Nov 9 01:21:52 N2000Primary rootnex: [ID 349649 kern.info] pcisch3 at root: SAFARI 0x9 0x600000
Nov 9 01:21:52 N2000Primary genunix: [ID 936769 kern.info] pcisch3 is /pci@9,600000
Nov 9 01:21:52 N2000Primary pseudo: [ID 129642 kern.info] pseudo-device: dld0
Nov 9 01:21:52 N2000Primary genunix: [ID 936769 kern.info] dld0 is /pseudo/dld@0
Nov 9 01:21:52 N2000Primary ebus: [ID 521012 kern.info] su1 at ebus0: offset 1,3083f8
Nov 9 01:21:52 N2000Primary genunix: [ID 936769 kern.info] su1 is /pci@9,700000/ebus@1/rsc-console@1,3083f8
Nov 9 01:21:53 N2000Primary pcisch: [ID 370704 kern.info] PCI-device: usb@1,3, ohci0
Nov 9 01:21:53 N2000Primary genunix: [ID 936769 kern.info] ohci0 is /pci@9,700000/usb@1,3
Nov 9 01:21:53 N2000Primary unix: [ID 950921 kern.info] cpu7: UltraSPARC-IV (portid 7 impl 0x18 ver 0x31 clock 1350 MHz)
Nov 9 01:21:53 N2000Primary unix: [ID 950921 kern.info] cpu0: UltraSPARC-IV (portid 0 impl 0x18 ver 0

I see this reply is a little late, but just came upon it.
http://wikis.sun.com/display/PlatformIoSupport/Summit4Gb2PortFcQlogic
As you can see in the link above the SG-XPCI2FC-QF4 is not supported in the V890
JK

Problem With Airport Status Icon After Snow Leopard Installation

Everything seemed to go well except on the Menu bar where the Airport status antenna is. Normally it shows a digital timer showing how long my internet connection has been up ( I use PPPoe ). After the install the icon shows that I'm connected to my AEBS, the network is up and the internet connection is up as well, can access mail and all web sites. Airport Utility shows no problems and that the connection is up but that digital timer no longer shows up at the icon. Does anyone have ideas? I did repair permissions and restarted the computer but no luck. And I have show Airport status checked in system preferences.
John

I too am facing issues with the Airport status icon in the menu bar after I upgraded to 10.6.
My internet connection works fine over Airport, I am even writing this post using my airport connection. When I go into the Settings panel and further into Network I get a green status indication on my Airport connection. So far nothing out of the ordinary.
But, when I look at the status icon on the menu bar the icon is dimmed out, as if I did not have a connection. When I click on it it says that I have not installed an airport card. Though obviously I have!
Anyone else facing the same issue?

Problem with JDBC Comm Channel from UNIX PI Installation.

Dear Gurus:
Inside a standard scenario, we have a receiver comm channel which use JDBC adapter type to connect to a MS Access remote database.
The database connection is made like this:
JDBC Driver: sun.jdbc.odbc.JdbcOdbcDriver
Connection: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//10.96.0.10/c$/app/appdb.mdb
Working from a Windows 2003 PI installation, everything works fine..
But we recently have finished a Heterogeneous migration from Windows 2003 + SQL server to UNIX AIX + Oracle servers and that particular interface does not work anymore.
Is there a way to connect to a MS Access from inside a UNIX PI installation..? Is there a native JDBC or ODBC driver that we can use to fix our problem...?
Waiting for your help. Best regards.
Eduardo.

Hi,
In the JDBC receiver CC, Advanced-->Advanced Mode, use poolWaitingTime and taskTimeout parameters and specify
some time using seconds.
Babu

Problem with machine rebooting. Essbase 11.1.1 installation.

Similar Messages

Maybe you are looking for