Problem with Macro Mode on 808 for close up pictur...

-The 808 have much better video and picture quality both in normal mode and in macro mode than the N8, but not in picture macro mode!
I took several pictures of very small things using the 808 with full resolution including extremely small text, but in full resolution you can not zoom in, and then you can not get closer because it would get impossible to focus. Then I took several pictures of the same very small things using the 8MP PUREVIEW and zoomed in. Then opened the pictures on my computer using 100% magnification, and the pictures were of the exact same size! And quality wise the pictures taken in 8MP PUREVIEW were slightly better, and in 8MP you see better what you are photographing because of the zoom. So, the software in the case of macro mode doesn’t use the potential of the huge sensor, and that means so much MP FOR NOTHING!
-Then I had an idea. The N8 has got zoom when in maximum resolution contrary to the 808, and the N8 has got 12MP vs the only 8MP of the 808. So I took several pictures of the same small things including extremely small text, using both the N8 with full zoom at 12MP and the 808 with full zoom at only 8MP. And then opened the pictures on my computer using 100% magnification, and obviously the pictures from the N8 were a little bigger because the N8 has got more MP. But the 808 was lucky, because even with the smaller pictures, the quality was just slightly better, just slightly, so overall you could see a little better what the words were in the case of text pictures than the N8.
-In conclusion, the 808 has got a way much bigger sensor, but the software in the case of macro pictures does not take advantage of the bigger sensor of the 808. It should be possible to zoom in when in full resolution, or at least it should be possible to use the pureview mode with zooming capabilities at 12MP at least. Or/and it should be possible to focus closer to the small things.

What kind of 49mm Close-up lens did you use or prefer?
but its not convenient to carry this everywhere you go unless you are a photographer.
How do I take macro picture of small worm inside a plastic transparent container? Its very challanging to focus with Nokia 808. I cannot beat my friend who's using Samsung GS 3 can focus easily on droplets on a plastic bottle because there is no such restriction of 15cm distance away of subject. ~really hope got manual focus ~dreaming of it~
Nokia 808 still give the best sharpness details for far shots but macro with poor focusing and restriction from the software which worry the most for me. If you give me N8 or n808 for macro I will choose N8 together with some macro lens to boost it more closer like an microsope.

Similar Messages

  • Problem with recovery mode and restore for disabled ipad2

    Hello, I hope you can help me.
    My ipad2 is disabled.  My only option is to enter recovery mode and then restore. 
    I followed the instructions to connect to my ipad to my computer.  I saw the appropriate restore graphic on my ipad.  Yet iTunes on my computer does not recognize my ipad in recovery mode.  Instead iTunes said it could not access my device because it was disabled.  I have the lastest version of iTunes on my computer.   I believe I have iOS 7 on my ipad.
    I am unable to restore my ipad.
    Any suggestions?
    Thank you!

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    iPad Stuck in Recovery Mode after Update
    http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
     Cheers, Tom

  • I had problem with my apps,they open for a while and closes with in seconds i cant acess them

    i had problem with my apps,they open for a while and closes with in seconds i cant acess them and i had this with all apss,expect apple apps

    Do you have a lot of apps? Did you use a lot of apps recently? If so, many of them may still be resident in memory even if you aren't currently using them. Double-tap the home key and you should see the app tray with a list of most recently used programs. Press and hold the icons in the tray and remove the ones you don't use often to remove them from memory. Powering off and then back on might also help.
    My wife's iPod does that sometimes, and it's usually because we run out of memory due to apps remaining in memory even when not used. The suggestion above is how we normally fix the problems.

  • "Microsoft Office has encountered a problem with licensing and will need to close. If this problem persists, uninstall and reinstall your product."

    Hi Guys!I am not it pro. but i need your HELP.Pls my microsoft Word and Excel starter were working fine, but after playing with my laptop, downloading , removing smth , i cannot open them proper anymore, cos this message comes up:
    “Microsoft Office has encountered a problem with licensing and will need to close. If this problem persists, uninstall and reinstall your product.”What can i do to make it work fine back? plssss need Help! thank u i n advance!!!!!!

    I faced similar challenge. Re-installation did not solve the problem due to unsuccessful un-installation of ‘Microsoft Click to run 2010’. The following steps worked for me. Please use your discretion to try and see if it works for you too..
    1 Uninstall Microsoft office Starter 2010. If
    ‘MS click to run 2010’ doesn't get uninstalled use  Microsoft fix it tool meant for installing and uninstalling programmes, to uninstall the same.       
    2 Download ‘Microsoft Office Starter 2010’ from internet.      
    3 Before launching, right click the executable file and click the 'properties'. Go to
    ‘compatability’ tab and choose appropriate 'compatibility mode' as per your OS. Tick the check box to use admin privilege under
    privilege level section.
    4 Launch the executable to install Microsoft Office Starter 2010 afresh. It should go through four steps during installation now. Complete the steps and enjoy. Thanks !

  • Problem with Append mode in File Receiver

    Hello,
    I am facing some problem with Append Mode in File Receiver.
    In channel config, i have given :
    Construction Mode : Append
    File Type : Text
    Message Protocol : File Content Conversion
    The size of the file which i am trying to send is about 9.5MB.
    I got this error,
    "Recovering from loss of connection to database; message
    loaded into queue by recover job: System Job (Failover Recovery)".
    So, it would seem that there was a loss of connnection to the database    
    while the file was being written.
    Note -  XI successfully recovered from the connection loss and   
    successfully wrote the file, however since the communication channel  
    was set to append, it appended to the partial file that was written   
    before the database connection loss. This is not correct. The file    
    should have been overwritten after the recovery even though the communication
    channel was configured to append.                                     
    Can anyone help me on this regard.
    Thanks,
    Soorya.

    Hi Venkat,
    I would suggest u to split the file in to chunks if u face any problem in processing at a time in append mode and also
    Memory Requirements are must 4 processing huge files:
    Q: Which memory requirements does the File Adapter have? Is there a restriction on the maximum file size it can process?
    A: The maximum file size that can be processed by the File Adapter depends on a number of factors:
    o The most important one is the size of the Java heap, which is shared among all messages processed at a certain point in time. In order to be able to process larger messages without an out of memory error (OOM), it is recommended to increase the size of the available Java heap and/or to reduce the concurrency in the system so that fewer messages are processed in parallel.
    o Another factor negatively influencing the maximum message size in releases up to and including XI 3.0 SP 13 is an enabled charcter set (encoding) conversion if the message type is set to "Text".
    o Using the transport protocol "File Transfer Protocol (FTP)" also uses more memory for processing than the transport protocol "File System (NFS)" (up to and including XI 3.0 SP 13).
    o If the Message Protocol "File Content Conversion" is used in a File Sender channel, consider that not only the size of the input file affects the File Adapter's memory usage, but even more the size of the XML resulting from the conversion, which is usually a few factors larger than the original plain text file.
    To reduce the memory consumption in this scenario, consider configuring the setting "Maximum Recordsets per Message" for the sender channel. This will cause the input file to be split into multiple smaller mesages.
    Plz do refer the following links:
    U may plan the availability of ur communication channel using "Planning Availability Times" feature
    http://help.sap.com/saphelp_nw04/helpdata/en/45/06bd029da31122e10000000a11466f/frameset.htm
    /people/sravya.talanki2/blog/2005/11/29/night-mare-processing-huge-files-in-sap-xi
    hi check the below links for reference
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10748ef7-b2f0-2910-7cb8-c81e7f284af5
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7086f109-aaa7-2a10-0cb5-f69bd2affd2b
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cc1ec146-0a01-0010-90a9-b1df1d2f346f
    Regards,
    Vinod.

  • Problem with Fullscreen mode

    Hello. I have problem with Fullscreen mode in Pages 09. Let me explain it. I launch Pages 09 on space nr 4, than i activate fullscreen mode and now when fullscreen is active i switch for example to space nr 2. And what happens? Pages also moves to space nr 2, but i don't want to move my pages to space nr 2. I guess it is a bug in Pages 09. Thank you for your advice.

    Hi There
    By the sounds of this behaviour you haven't set any space options for Pages within System Preferences (Expose and Spaces Pane). After experimenting with different options this is what I experience:
    1. Pages not listed in application assignment in spaces Preferences - Enter full screen in pages, switch from one space to another pages window will follow and exit fullscreen (this sounds like what you are experiencing).
    2. Pages set to every space in app assignment - Enter full screen in pages, switch from one space to another and pages will follow but wont exit full screen.
    3. Pages set to a single space in app assignment - Enter full screen in pages, switch from one space to another using control and arrow keys pages will pull me back into the space it is set to and will exit fullscreen. Using the control and number keys pages will stay in its set space but upon returning to that space pages had exited fullscreen.
    I suggest you add pages to the the spaces application assignment in System Preferences by clicking the plus arrow under the list of apps and select a specific space for pages to open in, once open Pages will only move from this space if you move it manually.
    You can send your feedback to Apple via http://www.apple.com/feedback/pages.html if you wish
    Hope this helps
    J.C

  • Problem with passive mode FTP server and NAT

    Hi,
    I have a problem with Passive mode FTP and NAT.
    I am trying to run both an FTP server and sharing the Internet connection via NAT. I have by the way specified the passive ports to use in ftpaccess (65000-65534). Everything works fine until someone tries to connect via Passive mode. I have tracked the problem down to the firewall and the rule that handles NAT.
    Firewall rule config without NAT:
    00001 allow udp from any 626 to any dst-port 626
    01000 allow ip from any to any via lo0
    12300 allow ip from any to any
    65535 allow ip from any to any
    Firewall rule config with NAT
    00001 allow udp from any 626 to any dst-port 626
    00010 divert 8668 ip from any to any via en1
    01000 allow ip from any to any via lo0
    12300 allow ip from any to any
    65535 allow ip from any to any
    So, passive ports do not work when NAT is on. If I turn it off, Passive ftp works like a charm.
    But how do I solve my problem? I have in my quest for the answer stumbled upon "-punch_fw" but do not know how to use it or if it even helps me at all?
    Best regards,
    Peter
    B&W G3 Mac OS X (10.4.5)

    Media/Lacrosse-1-tiny.3gp
    I can't find the file on your server.
    They may also need to edit the .htaccess file to allow the .3gp file extension be used. Call them.

  • I keep getting a message about a problem with the plug in container for firefox. what does it mean?

    I am getting a pop up box saying that there is a problem with the plug in container for firefox. It keeps saying do I want windows to find a fix for it and close it or do I just want to close the program. What is this plug in container for firefox and why am I constantly getting this message? It has been happening for the past month or two.

    It means either you have a faulty/out of date plugin, or your firewall/antivirus is causing problems with Firefox.
    Make sure you update all your plugins and disable unwanted ones.
    https://www.mozilla.org/en-US/plugincheck/
    https://support.mozilla.org/en-US/kb/disable-or-remove-add-ons
    Also, make sure your firewall/antivirus is not blocking plugincontainer.exe from the Firefox folder in your computer. How you make sure that's not the case will depend on your firewall/antivirus.

  • I can not do the update , what should I do to fix this error ? "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

    I can not do the update , what should I do to fix this error ?
    "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

    Hi,
    Please refer to the help document below:
    Error downloading, installing, or updating Creative Cloud applications
    Regards,
    Sheena

  • Compatibility problem with macro media flash active control

    I am getting a message on my screen "compatibility problem with macro media flash active control, it isnt compatible with my version of windows (vista).  How can this be fixed?  why am I suddenly getting it now?  I have the latest Adobe flash player installed.
    Trisha

    the latest flash is probably the problem... it's seems that the latest flash has been causing a boat load of issues. i did a system restore to undo the flash and mozilla upgrades and it's still crashing but not as bad as it was with the upgrades.

  • There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page

    There seems to be a problem with the file download. For troubleshooting tips, please visit our customer support page.

    Thank you for the update Dlawrenceusa.  I would recommend reviewing the installation logs for the updates that are failing to apply to determine the exact cause of the failure.  You can find details on how to locate and interpret the installation log files at Creative Cloud Help / Troubleshoot install issues with log files | CC.  You are welcome to post any specific error messages you discover to this discussion.

  • HT2020 if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

    if you have internet sharing on imac with Mountain Lion its stil problem with sleep mode ! why ???

    Log a bug with Apple, with whatever details you can provide.  In the interrim, consider acquiring a router; either a repurposed x86 box running open-source networking or gateway software, or a commercial device.

  • Problems with sources of supply determination for external requirements.

    Hi gurus...
    My scenario is  SRM Classic Extended.
    We have a problems with sources of supply determination for external
    requirements comes from ECC. The shopping cart is created with successful
    based in the purchase requisition at ECC, but when i try to make the
    determination of sources of supply the system doesnt find any source of
    supply.
    There are a lot sources of supply creates for these parameters. The
    contracts were already replicated to ECC.
    This problem only occurs with external requirements comes from ECC, if i
    created a shopping cart directly at SRM, using the same parameters, the
    system propose the sources of supply correctly.
    Is there something that we can do?? This is the normal comportment for the souces of supply?
    Tks,
    Gustavo Nogueira

    Hello Gustavo Nogueira
    Then it is an issue.
    How are you searching the source of supply in sourcing cockpit.
    Can you replicate the issue?
    Let me know step by step,
    as per standard SAP , source of supply data must be available for shopping carts so that buyer can assign the source of supply.
    please share what source of supply you have there .

  • Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

    Is anyone else having problems with the new software update for macbook? I get random clicking and flicker an movement of the pointer!

    OS X 10.7 Lion, 10.8 Mountain Lion & 10.9 Mavericks
    Reset Password starting from Recovery HD
    Start the computer,then press and hold down command and R keys to start into recovery partition.
    When you see the Apple logo, release the keys.
    Wait until  OS X Utilities window shows up.
    Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
    from the drop down.
    Terminal window will appear.
    Type in   resetpassword   and press enter on the keyboard.
    Leave the Terminal window open.
    Reset Password Utility window will open with Macintosh HD selected.
    Select the user account from the popup menu box.
    Enter a new password.
    Reenter the new password for the user.
    Enter a hint.
    Click the "Save" button.
    Click  in the menubar and select Restart.
    Log in.
    If Keychain dialog box appears, select “Create New Keychain”.

  • Problem with non iPhone users receiving my text sent pictures. Can I make them smaller files?

    Problem with non iPhone users receiving my text sent pictures.  Can I make them smaller files? I know that is possible for email sent pics.

    My bad,  It was a Verizon problem.  When they upgraded my phone they were supposed to remove all blocks on messaging . Found out they did not do this.  All messaging now works.  Thanks for listening.

Maybe you are looking for