Problem with Magic dvd

Magic dvd does not respond when trying to get movies from the movies folder at start up. May it be because of the great size of this folder (138 GB?) I´ve deleted installed themes, plist and caches. Any further idea? Thanks in advance.

you mean you do not have full access to your movies in the media pane for iDvd'08 because it freezes or locks up ..... correct?
Does this also happen at times when scrolling thru your images contained within the iphoto library?
Tips:
1. Make sure you have plenty of HD space (no less than 20GB's on the boot volume in which iDvd is loaded to).
2. Drag and drop the plist for iDvd to the trash and Restart your mac. Use the finder to locate this item/s:
com.apple.iDvd.plist
3. Follow's OT's instructions here:
You can add a folder of photos to the Media pane in iDVD by dragging that folder into the Media pane window from the Finder. You need to be in iDVD and then click and drag the folder into the Media pane. If you want that folder to show up in the other iApps, iPhoto or iWeb, you'll have to follow the same process for each of those applications.
4. Make sure you have run apple's software updater and have the most current versions of iDvd and QT.
5. check to see if you have any third party QT plugins like Perian for example and let us know.
Btw ....certain added audio clips to your movies can also cause this to happen in iDvd so take a look at any audio you may have added recently.
Lastly please post the crash log from your computer here so we can see what's happening on your particular computer.
Apple > about this mac > more info > Software > Logs
Good luck and I hope this helps but if not just come on back.
Message was edited by: SDMacuser

Similar Messages

MOVED: Problem with SATA DVD/RW

This topic has been moved to AMD64 nVidia Based board.
Problem with SATA DVD/RW

I use the Plextor PX-712SA's with no issues. However...I do not believe the SATA versions require jumpers. Try plugging them in on SATA port 1 or 2, making sure those are enabled in BIOS of course. Make sure all connections are secure. There have been some issues with these particular drives not operating properly, but it has not been an issue with seasoned system builders, so the problems may be with the builder himself. Usually, Plextors are so good, they'll almost burn a paper plate! Try a different medium, maybe another brand of blank CD or DVD.
You may also want to check Device Manager in Windows, to see if it is listed "This device is working properly"!

Im having problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges in the video , does anyone have any idea ?

Im having a problem with the dvd quality, I'm using compressor to convert the video fils from apple prores to mpeg2 .It doesn't matter how long my video is even if its just 5 minutes I'm getting cut edges/lines in the video specialy if i have titles it comes up really bad , I took the same video to a friend of mine who have PC and he uses Encore , did the encoding there and it was just fine no problems! BTW I tried using doferent setings in compressor from CBR and VBR I even pushed up the setings to 8 or 9 BR and still no luck !
does anyone have any idea ?
Thanks in advence ...

Let's focus attention on just the Sony. (What model and what resolution are you shooting?)
For now, I'll assume you're shooting 1080i.
Take a representaive clip into a new sequence. Add a title.
In your sequence, make sure field dominance is set to Upper.
Set render settings to Pro Res 422.
After rendering, export QT self contained.
Import into Compressor (I'm now referring to v3.5).
Select the 90 minute Best quality DVD preset.
Open frame controls and turn on (click the gear icon). Set Resize filter to Best.
Submit burn and check quality on TV.
Good luck.

Problem with copied DVDs--"DAMAGED TS FOLDER" (HELP or I shall go MAD!)

Hi folks--really, really hope someone can help me. This has got me beat. And I'm by no means sure it's a problem with my computer, but...
The facts:
1. I recently acquired a Panasonic DMR-ES20 DVD recorder, primarily to make DVD copies of a number of old and treasured videotapes. These are from broadcast, so copy protection isn't a factor.
2. I often use my Mac as a TV to watch DVDs and have never had the slightest problem with commercial DVDs.
3. I am (or was) using Roxio's Popcorn 2 program to make up backup copies of the DVDs I make.
4. I made about 20 DVDs without problem, and ALL work perfectly on the Imac, and ALL can be copied via Popcorn 2.
5. Then, SOMETHING CHANGED, I have no idea what--but now, each and every DVD I make with the Panasonic shows up on the Imac as follows:
"The TS folder appears to be damaged."
These disks will NOT play on the Imac and cannot be copied with Popcorn 2. They DO play on the Panasonic machine, however.
6. I have tried varying media, including high-quality Taiyo Yuden disks. That didn't help.
7. I have reset the recorder to original factory settings. That didn't help.
8. I have used a disk lens cleaner on the Imac. That didn't help.
9. I have spoken with Applecare and (God help me) Panasonic. Both pronounced themselves baffled.
10. As am I. As things stand, I've got a lot of more or less useless equipment. Ideas? Hints? Suggestions?
2 GZ PowerPC G5 Mac OS X (10.4.7)
2 GZ PowerPC G5 Mac OS X (10.4.7)
2 GZ PowerPC G5 Mac OS X (10.4.7)

The only time I have ever expierianced an issue like this is from doing extensive burning. The cause is from the storage of the cache files and some of the older TS folders even after you trashed them from your machine after you burned.
The only way I have been able to work around this is
First Repair Permissions as is submitted by Gulliver.
http://discussions.apple.com/thread.jspa?messageID=607640&#607640
I have also found that by running 3 freeware or shareware programs one right after the other and after the 3rd it will restart your computer all is well when I do it.
First run Macjanitor.
http://personalpages.tds.net/~brian_hill/downloads.html
Next run Cache Out X.
http://www.versiontracker.com/dyn/moreinfo/macosx/14850
And last but not least is ONYX.
take note when you run Cache out X and Onyx be careful to not delete your favorites in your browsers.
http://www.versiontracker.com/dyn/moreinfo/macosx/20070
A note of interest, I have had to do this after I have done a lot of copying to get rid of all the excesive junk that is left behind.
Give it a try.
Good Luck Don

Problems with burned DVD in iDVD - Works in some players, not in others

Hi, I'm having a strange problem with a DVD I burned in iDVD.
I have a disc image that I made in iDVD and then burn the Audio_TS and Video_TS folders to a DVD.
I burned to a Memorex DVD+R.
The video pops up fine and plays on my computer after it burns, but if I eject the disc and try to re-insert it, the DVD preview says "Supported disc not found". It did this same thing when I tried it in my Macbook.
It works fine in my standard DVD player, but I also tried it on my Playstation 3 and it did not play.
A few things I am going to try is buring directly from iDVD instead of first making a disc image, and also using DVD-R, although I heard that DVD+R is generally a better format to use.
Someone also told me that DVD+R does not play on macs, which I question.
If anyone has any other suggestions or might know why this is happening, I would greatly appreciate it. It is an important project that needs to be done soon! Thanks.
Message was edited by: Nathan Edwards1

The disc image option is within iDVD: File > Save as Disc Image. If you switch to DVD map map mode you can drag your movie to a spot prior to the menu so that the movie plays automatically when put into the player. Under advanced, you can set the movie to loop.... otherwise I think it goes back to the menu when done playing. BTW, all DVDs MUST have a menu it is part of the DVD specification. It is just a matter of whether you see the menu. As far as exporting your project back to tape... you won't loose any quality and your audio, along with your video and any editing to each will export back to tape. However, a MP3 is not generally considered a higher quality file (although perhaps the recorder was closer to the source?). As a matter of fact, if you are editing your audio I strongly suggest using a file sampled at at least 16-bit/48Khz, AIFF (or WAV or anything lossless).
In regards to the slow burn speed: I agree that a slower burn speed is better than the fastest burn speed (due to error corrections ect). However, I would choose a middle of the road burn speed. If my choices are 4x, 6x, or 8x, I would choose 6x. If it is 2x, 4x, 6x, I would choose 4x. And yes, quality of blank media can effect the playback of a disc that played once just fine.
Mike

Problem with burning DVD's

I have Roxio Toast Titanium and I have a problem with burning DVD's. When I put a blank DVD-R in my superdrive, select the files and go to burn; the advanced recording options will not let me deselect the check in "close disk". It is shaded. But when I use a CD-RW I can and so far the Roxio help has...well has not been help at all. I mean why would I spend the money to buy a software package that lets me do the same thing as the basic OS-X disk utility would let me do? Drag a file, burn it and close the disk from any future use....
Sorry if this does not belong here, I did not see a area for general software questions way back in the main forum area not one here.
Rob

Donald,
Hi and thank you.
To give you more details on what I am trying to do; I am trying to burn in Mac & PC format. I am mainly trying to back up all my assorted college files (I am a college student), these files are lecture notes in Word with embedded audio recordings, standard Word documents such as essays, etc., spreadsheets, PDF documents, etc. The files I am attempting to burn should not be larger than 4.7 gb and Roxio has not given me a warning that it would be.
I am just frustrated that when I put in a DVD-R or -RW I only have one option, and that is to close out the disk when it is finished burning it. I have also gone to the recording tab, on the menue bar, to uncheck the "close disk" box after I put in a blank DVD and before I select files to burn. The option is shadded preventing me from even trying, which is not the case for a CD!
Thank you!
12 PowerBook G4 Mac OS X (10.4.1)

Satelite 1400-503 problem with a DVD+R

Hello,
I have a problem with my dvd - rom. Family of me have burned a dvd+R. Now can't i play it on my notebook. So i tested a dvd-R and this works well.
A friend of me tells me that i can change some configuration of something like that so i can play the both formats. Can someone help me with this???

Hi
I don't think this is a setting to be changed. The drive must support the + format.
This is not very common if the machine is not very very new. If You get this problem with the built-in drive of Your Sat1400-503 and it is not replaced by some unsupported one, then I am very sure that it does not support the DVD+R format.
BR
Tom

Problems with my DVD/CD-ROM Drive (MS-8216)

I have a BIGGGG problem with my DVD/CD-ROM Drive (MS-8216)
I was copying somethin in my comp, and the cd got BOOOM into pieces inside.
My warranty expired 1 month ago, so i clean it in the inside. After this it is like this :
- i can watch 700mb movies AVI format with no problems, but when i want to copy anything in my comp from the cd it always stops rotating at 6% of copiyng and BANG it stops and an error has acourde. Same with the dvd's. Please don't ask me about my comp config couse i know it has no problem with that. I left every thing like it was inside --- impecable, no wiress unplugged and i've upgraded the firmware also
What can it be. Thank you

if you can read the CD, but not copy from it, try this program:
Isobuster
It allows you to read with a much better accuracy than the generic windows driver.
However, i'm afraid your drive has been damaged in the explosion and this is only a work around, not a real solution.
The good point is that DVD burner are now cheap, but it is not much...

Mobile Home problem with Magic Triangle

So I have been setting up a magic triangle for the past few days with an OSX Lion server. I believe it is working properly. The server is running OD and is bound to my AD. I have made an OD group which contains my AD users, and I have set that OD group to have limited application preferences (one of them is to block the App store). All my users have MacBook Airs which they will take off-site, so I enabled mobile home folders in the AD bind and in the OD group mobility settings (with confirmation required).
When I tested it today, with Airs running 10.7.4, here is what happened.
When the system was on the network, it would log a user in, ask to create the mobile account, and successfully create it. Once logged in they were limited to the application preferences that I set on the server. I considered this a complete success.
When I disconnected them from the network, I had expected that they would still be able to log in and the system would fuction the same way with the exception that they would not sync their changes until they were back on-site.
Instead...
When the same user trys to log in it says the AD server is unavailable and then logs them in anyway. However, once they are at the desktop, none of the permissions are in place. They can go to the app store, or do anything else they feel like. Once they are back on the network, all the server based preferences reappear and lock the system down.
So my questions are:
1. Should a mobile account based system compain that it cant find the AD domain when offsite?
2. Why is it not checking some cached verison of the permissions and locking down the notebook when offsite? I can tell that it is caching the user name and password (as loging in as a user the air has never seen before will simply give a login error), as it will let them in, but it is not holding any preferences.
3. How can I prevent users from simply disconnecitng from the network to bypass all my server based policies?
Hope someone can help

Hi,
I'm having a similar problem with exactly the same setup, our clients are 10.7.4 wired not wireless the OD server is 10.7.4 and the clients are authenticating via an AD 2008 R2 domain.
We've had this scenario in the past running 10.5 and 10.6 without any problems but with 10.7.4 the clients' MCX settings are lost when they're not connected to our network. It seems to only lose the settings applied to user groups but not computer groups.
At this moment in time I don't have an aswer I'm still looking, have you found a solution?
I know configuration profiles are the way forward and in the future I'll move over to them but they don't seem to work that well with PHD's at the moment.
If anyone has any thought on this it would be much appreciated.
Thanks,
Jay.

Problem with Magic TrackPad and Macbook Pro

I just bought the Apple Wireless Keyboard and Apple Magic TrackPad for my home desktop setup. I connect my Macbook Pro 13" (from august 2010) to a Dell U2410 screen.
Everything works perfectly for a while, but then the cursor starts jumping around on the screen when I use the Magic TrackPad. Now here comes the weird thing, if I open the lid on the Macbook just a few inches the jumping stops completely and the Magic TrackPad works perfectly again.
I have tried googling a bit and browsed these forums also - no luck finding a solution.
I have also tried connecting a USB mouse to the Macbook when the cursor started to jump around - no problem with the USB mouse. I have also tried a different Magic TrackPad that my friend also just have bought for his setup - same problem after a short time.
Everything is updated to the latest software and firmware.
Thank you in advance for your help.

I have the same problem with a Trackpad paired with a new Mac Mini just purchased in September. After a while, my trackpad also starts to exhibit behavior similar to those described by Hecro. The trackpad cursor feels frozen, or else it jumps around, often trying to stay away from or jump over any hyperlink in either text or graphic form on the page I am viewing.
I find that if I pick up the trackpad and hold it above my palm between my thumb on one side and my fingers on the other side — so there is no pressure on the clicking feet on the bottom of the trackpad — a "jumping" trackpad instantly becomes a "stable" trackpad. Put it back down on a surface and it starts jumping again.
Also, when it starts jumping or skipping, I also find that if I use one finger and bear down hard on the trackpad, it resumes being responsive.
I am filing a comment about this on Apple's feedback forum at www.apple.com/feedback at the advice of a Genius at the Apple Store at Cambridgeside in Cambridge, Massachusetts USA.

Problem with leopard DVD loading in PowerPC G4

Hi having problems installing Leopard DVD on Mac G4 desk top - 1GHz PowerPC G4 (3,6), 1MB L3 Cache, 768 MB Ram.
A few of the details:
1) I have installed Leopard on my Laptop and it is running fine and it is a family pack edition DVD.
2) I wiped the G4 I am trying to install clean and re-loaded the original system software, then loaded to Tiger to see if that was the issue...When I put in the Leopard DVD it doesn't even show as being in the computer. It doesn't come up on the desk top...it doesn't show in the HD...it doesn't make a sound at all when put in the DVD slot...basically, the computer is not recognizing the DVD. I have tried other cd's and DVD's in the drive....everything is working except the Leopard DVD.
Any ideas?

Allan Eckert wrote:
Hi TK333;
Where did you get the Leopard DVD? Did you buy it or did it come with another Mac?
Allan
Hi Allan. He said it was a Family Pack DVD.

Problem with a DVD movie

Hey,
I have a DVD movie that when I enter it to my iMac it doesn't mount, makes the regular fan/processor noise continuously, then after a couple of minutes the finder gets stuck and I can't eject it. I never experienced this with any other dvd.
And the movie is "Naqoyqatsi" (If someone else experienced this problem with it)
Thanks

Well, I have discovered from doing a lot of burning that if you don't run 3 programs to eliminate the cache files and the build up of files that your computer stores, this seems to cause DVD Movies not to mount normal.
If I run,
Macjanitor.
http://personalpages.tds.net/~brian_hill/downloads.html
Cache Out X.
http://www.versiontracker.com/dyn/moreinfo/macosx/14850
Onyx.
http://www.versiontracker.com/dyn/moreinfo/macosx/20070
The one above is for 10.3
http://www.macupdate.com/info.php/id/11582
The one above is for 10.4
Running these 3 work for me.
Remember shutting your computer Off, I mean clear OFF for a time occasionally helps also.
Bear in mind there are several schools of thought on this subject.
I have experimented and the above information has always worked for me.
Hope this helps you all.
Cheers Don

Safari update - problem with magic mouse

Hi all, I recently installed safari update to 5.1 (6534.50) on a mabbook pro OS X 10.6.8. Ever since update, I've been experiencing the problem with safari reloading pages and kicking me out of websites that use flash player (back to log-in screen). I can deal with that by using another browser, however the update has really messed up my magic mouse. At first, every time I put my macbook to sleep or shut it off, the mouse would stop responding when I woke the mac up. I would have to disconnect the mouse and reconnect. But this was really eating up my batteries, so this morning I shut the mouse off when I put the mac to sleep. Now it won't connect at all. Anybody have any suggestions? Thanks in advance for your help!

Thanks Carolyn and Barry,
I did what Carolyn suggested - moving the .plist file into the trash. I have not resetting the PRAM or SMC yet.
When I go to system preferences>Bluetooth, I get a screen that says:
Bluetooth power is off. To use Bluetooth, first you must turn it on. (Note - my mouse is turned on)
Both ON and DISCOVERABLE are checked.
In the middle of the screen, it says No Devices (Set Up New Device...)
When I select set up new device, it finds my device and attempts to pair but is unsuccessful.
Resetting the SMC and PRAM scares me. After reading the links that Carolyn provided, I remembered another weird issue I had with my mac shortly before the update and mouse issue. For some reason, my clock suddenly became out of sync and I was on a 2000 date. I got an error message and reset the clock manually. Could this be the cause of my mouse issue? I feel like every step I've taken to get my mouse working again has made the problem just a little bigger!
Thanks again for helping me!
Judy

Photoshop cc problem with Magic Bullet Looks 2 !

I am having trouble with using Red Giants' Magic Bullet photolooks 2 plugin with PS CS6 (32&64).
The standalone program works fine on its own but fails to launch properly from PS's filter menu. It tries to launch the app but then reports an error Sorry, an error occurred (12288), Corrupted memory profile, then an error Can't open dest profile. These errors can't be cleared except by going into task manager to kill the app. Photoshop reports the error as LooksBuilder failed to launch. Please ensure the application has not been renamed or moved from the install location and then Could not complete the Photolooks command because of a problem with the filter module interface.
Please Help
i heard that the fix is by the color management , but i dont know how

Disable those plugins until you can get an update from the plugin manufacturer. Just change the name of the folder they're in to start with ~ and relaunch Photoshop.
Also, the magic bullet looks have nothing to do with color management.

IMac 27" i5: Bluetooth Enabler Driver Problem with Magic Mouse and Keyboard

So I just got my iMac 27" Quad Core i5 computer and was able to succesfully install Windows 7 64-bit (using this guide to get past the blank screen problem http://discussions.apple.com/thread.jspa?messageID=10533092). I then installed the Boot Camp 3 drivers from the Mac OS CD and updated windows via Windows Update. Everything seemed to work well.
I even had right click and scrolling capabilities with the MAGIC MOUSE! Also, all the keys were functional on the wireless keyboard.
However, after a few minutes of use the keyboard and mouse would hang and get stuck and I would have to do a hard reboot of the machine. I uninstalled the Apple Bluetooth drivers from the Add/Remove Programs menu and it fixed the problems with the devices getting stuck. However, function keys on the keyboard (brightness, volume, etc.) and scrolling in the Magic Mouse now not work. Is anyone else having this problem?

I found a solution, and everything now works! I followed step three in this discussion http://discussions.apple.com/thread.jspa?threadID=2221427&tstart=0 which says:
Disable power management for Bluetooth Radio. Open device manager, open Bluetooth Radios and right click on "Apple Bluetooth". Select the "Power Management". Uncheck "Allow the computer to turn off this device to save power".

Problem with Magic dvd

Similar Messages

Maybe you are looking for