Problem with Mail in Snow Leopard

I have iOS10.6.8. My mail program keeps recovering an email that I sent a week ago. It included photos. I delete them, but they just keep returning. Worse, no new emails from that account appear. I can send, but not receive unless I go to my iCloud account online. I have another account that has no problem sending or receiving. I have deleted tons of old mail, gone online and deleted from the server.

I finally resolved this issue. I tried many different things, which I will list below, but I'm not sure which one or combination actually did the trick. Bottom line, it stopped recovering.
Per one suggestion, I removed the attachments, then deleted the email message. I did this over and over x's at least 150, the amount of times the first message was recovered.
I deleted all trash items in Mail and on icloud.com
I rebuilt the mailbox (Mailbox tab)
Under the Window tab, I ran Connection Doctor, but it merely told me what I already knew, that it couldn't connect to incoming mac mail.
I deleted the Recovered Message mailbox several times.
I checked My Documents download file and deleted photos from there.
After a few days, I had success. The email with 4 photos that I had sent (and by the way, it had been received the day it was sent) finally left for good. I received new mail.
Then the problem started all over with a different message, one I had received (several weeks before) with 4 photos plus a couple other messages. The one with 4 photos once again would not go away, so I did the above steps all over and over again. After a week of working on it every day, the problem went away for good.
All of the help menus tried to get me to check the settings and password. Really? It's been working just fine for 7 years and it's just going to stop all of a sudden? I hope this message helps someone out there.

Similar Messages

Font problem with MX under Snow Leopard

Anybody know what might cause an app built with Director MX not to display an installed (not embedded) custom font under Snow Leopard?
The program was built quite some time ago but was tested under previous Mac OS X.x versions and worked fine. What might have changed that could cause this problem?
Complicating this is that I don't have Snow Leopard myself to test it directly, but here's what I do know:
The font is definitely installed and available to other apps.
Everything else about the app works fine.

I noticed the same jumbled text problem.
When I went to look at Font Book, I see that those fonts are no longer installed. It must've happened when I loaded Snow Leopard last weekend.
Anyway, I went to reinstall fonts, and I see I've got a bunch that got uninstalled. But when I try to reinstall them, like Calisto and Caligula to name the first couple I tried, Font Book reports that there were serious errors when trying to load them.
Does anyone have insights into the vague message: "System Validation" as the serious problem? I don't see a way to get more details about the problem than that.

Problems with FCP after Snow Leopard Installation

I'm editing canon 5d footage in FCP. I use MPEG Streamclip to properly convert the footage before importing to fcp. Everything was working absolutely fine until I installed snow leopard. Now, all of the clips in the timeline have those weird lines as if I imported the footage without converting it. I have a deadline and if I have to re-edit this entire project it's not going to be pretty. I have installed all of the updates for FCP and Snow Leopard. I tried a test by creating a new batch in MPEG streamclip and the footage is fine. It appears that I might have to re-edit everything.   Can someone PLEASE offer some assistance? I can't afford to re-edit this project.
Thank you

Yes... I am aware of the canon plug in for converting 5d/7d footage. I either use that plug in or MPEG stream clip and they both have been working fine.   "Properly" meaning... FCP does not recognize H.264 (5d and 7d) therefor we need to convert the video using either MPEG stream clip or the free canon plug in. The best codec to edit this footage is ProRes 422LT ProRes422 - I only use the 5d and or 7d cameras for my projects and have been editing this way for some time without any problems what so ever. The problems immediately arose after upgrading to Snow Leopard. The problem lies in my EXISTING FCP projects that are already in the works. I am still able to convert footage for new projects without a problem. I am using the latest updated versions of SL and FCP. I did the following to trouble shoot:
1. Did a clean reinstall of FCP - STILL HAPPENING
2. On an existing project I deleted a few of the problem clips. Took the original and converted it again using MPEG Stream clip. Renamed it and from the FCP project, I located the new clip. SAME PROBLEM
3. On an existing project, I deleted a few of the clips completely. Converted the original again using MPEG SC. Imported the entire new clip in FCP, re-edited it and dragged it into the time line. NO PROBLEM WORKS FINE
4. Opened a new project in FCP.   Took some of the original problematic clips. Converted them using MPEG SC. Dragged into the timeline. NO PROBLEM, WORKS FINE
5. Played both the original clips (before conversion) and the converted clips in Quick Time - NO PROBLEM WORKS FINE
6. Exported part of a problematic project to Quick Time - NO PROBLEM WORKS FINE
7. Opened up one of the same projects from the same hard drive on my other mac (Mac Book Pro) and there are NO PROBLEMS. THEY WORK FINE
Based on everything I've listed above, the problem seems to be happening in the Viewer and Canvas on my I-Mac which I just upgraded to Snow Leopard. The exported projects are fine. Am I to assume that I should continue working with these existing projects and everything will be fine? I've spoke to 5 or 6 friends that are experienced and no one can come up with an answer.

Problems with AW in Snow Leopard

I am having multiple problems with AW, particularly graphics, under snow leopard. Sometimes, while working on an existing file, the whole thing locks up forceing me to Force Quit the application thus losing whatever changes I had made. Other times when I open a file to work on it, several features are so slow as to be unausable. I am not really using the WP or Spreadsheet anymore as I have migrated most of those AW files to iWork so not sure if anything is happening in that regard. Has anyone thought about the possibility of orphaning the two graphics parts of AW so they can be used independently?
Sparkgapper

Since I DO NOT use pict or tiff as my mode of fileing, it is no problem whatsoever for ANY graphics program to open jpg, my preferred format. Secondly, it is quite easy to open a pict file in AW then copy/paste it into just about any graphics format - this is my second method where necessary.
While AW Graphics has "aged" it retained the user friendly interface of all Apple programs of that era whereas now the steep learning curve is drastically restricting many "Entry Level" program to those who are required by their work to make that kind of effort. Then add to that the "Evolution" of some programs whereby they all but forever archive older documents by their inability to use parts of the older formatting and formulas.
My graphics use capability is quite simple, usually working with images of ancient genealogical documents for transcription or old maps that have been scanned poorly, plus photos (jpeg) of these same objects. As such, I do not need a "Full Blown" application but something more on the lines of AW Graphics and Paint - I used to transition between the two for certain types of manipulations.
sparkgapper

Problems with re-installing Snow Leopard.

I'm trying to reset my macbook pro to factory settings, but when loading the Snow leopard CD the screen dims and a "Turn off your computer" message comes up, canceling the procedure. How do i fix this/reset my mac in another way?
(As a side note, the reason for my wanting to reset my mac to factory settings is the fact that I'm trying to install Windows through bootcamp, but when partitioning the disk I get informed that my disk is too fragmentated, and offers re-installing snow leopard as a suggestion of how to fix it.)

Clean the bottom of the disk carefully with a very soft cloth and perhaps a little rubbing alcohol, when dry stick it back into the computer.
What's going to happen next is ALL your data is going to be removed off the computer.
If there is data you wish to keep, cancel now and grab files and place them on a external drive and disconnect.
Hold c and reboot the computer, the second screen in under the Utilities menu is Disk Utility
On your left is your internal hard drive hardware name, select it and click Erase >Format HFS+ Journaled and Erase...
When that's done quit and install OS X. Reboot and go through the setup. Software update.
Once that's completed run Bootcamp and parittion your drive and follow the Bootcamp instructions here
http://www.apple.com/support/bootcamp/

Problem with airport after snow leopard upgrade.

I know there are several threads about this already but none of the "answers" to those threads fix my problem. I just upgraded snow leopard and installed the new update. Since then I can connect to my wifi, but nothing will load. My airport says that I am connected and that I have a full signal, but whenever I open my internet browser (firefox, safari), nothing will load, it just stays on the screen that says "loading" at the top. I've tried deleting the "Automatic" airport option and creating my own but that has not worked. Any suggestions as to how to fix this?? Right now the only way i can access the internet is be plugging directly into the router.

Hi swftrules,
It's probably worth trying just to ensure that the issue is (or isn't) location specific. Preferably to go somewhere that you've never connected before and has free WiFi without crazy encryption. An Apple Store is a great location to try.
If it does work at the new location, I'd be inclined to reset the router and set it back up (open network) and see if that works and then add encryption from there.
If it doesn't work at the new location, then I'd consider reloading the OS if you've already tried the new network location.

Problems with macbook after snow leopard install

Hi,
I recently upgraded my macbook. Saved and backed up everything from my old one and then loaded snow leopard onto the new one. Since loading snow leopard my optus wireless internet is refusing to work (Saying it has quit and wont reload), my photos in iphoto are showing up as thumbnails but not letting me see them or save them as jpegs and a lot of programs are quitting unexpectedly as i am working on them.
My biggest concerns are with my photos and internet.
Anyone know some solutions? I am a bit of an amateur with all this and don't know a lot of jargon. THanks

no, i think donv means what kind of machines new and old you have. look at the profiles of most users here - they describe in more or less detail what Macs they have and what CPUs etc. All this would be helpful for donv to advise you according to your need.
As for moving your data to the new machine, check this link http://discussions.apple.com/thread.jspa?threadID=2169737

Problem with upgrade to snow leopard

I upgraded to snow leopard from 10.4, and now my Imac will not let me login. "Your home folder, which is protected by FileVault, didn't open. It needs to be repaired." I've tried to restart with command + s or simply holding c with the boot disk and nothing happens it keeps taking me to the login screen. Somebody please help me this is very frustrating...

Have you tried this ? http://www.tuaw.com/2011/12/12/prevent-certain-accounts-from-unlocking-filevault -2/
Terminal is accessible from the install disk, in Tools, I believe. You can also try this to unlock your password:
Boot in Single User (Command-S), then at the prompt, type the following commands, hitting Enter after each one:
mount -uw /
rm /var/db/.AppleSetupDone
shutdown -h now
This should unlock your login screen. Additionally, you can downgrade to Tiger again (clean install required, so better partition your drive, then install on the free space), back up your personal data to an external drive, then wipe out your entire drive and reinstall from scratch.

Problems with time machine snow leopard to mountain lion

I have recently upgraded from Snow Leopard to Mountain Lion now when I enter Time Machine the 'ladder side bar' will only display item from the date I went onto Mountain Lion even though the external HD has information datuing back 3 years, anyone had the same problem?

Hi,
http://pondini.org/OSX/Setup.html
http://pondini.org/TM/B6.html

Problems with Appearance on snow leopard install

I just upgraded from tiger to snow leopard and i am trying to change my dock appearance to look like the newer systems with the space screen i am not able to remove this blue background screen. Any suggestions?

tb3525 wrote:
I just upgraded from tiger to snow leopard and i am trying to change my dock appearance to look like the newer systems with the space screen i am not able to remove this blue background screen. Any suggestions?
dock appearance or desktop background appearance? I think you mean the latter. when you say you can't change it, what exactly happens when you try? did you try changing in in system preferences->desktop&screensaver->desktop?

Problem with tiger to snow leopard upgrade

Hi,
I wanted to upgrade from Tiger to Snow Leopard and bought a retail 10.6 Snow Leopard install disc MC223Z/A. on the box. 2Z691-6428-A on the disc.
It would not let me install it unless I erased and partitioned the destination disc thus losing my settings and preferences like the old Archive and Install as it suggested in the article mentioned below..
I tried this after reading this article
http://www.computerworld.com/s/article/9137147/Upgrading_to_Apple_s_Snow_Leopard _OS_What_you_need_to_know.
I presume now that the article was written for upgrading from Leopard and not Tiger.
Perhaps I missed something when I tried.
Any ideas from the experts.
Regards from UK,
Alan

Hmmm,
10.4.10
# Disk 1: 2Z691-6089-A
# Disc 2: 2Z691-6113-A
Compatibility
17" iMac (Late 2006 CD) Intel Core 2 Duo 1.83GHz, Mac Pro Intel Xeon 5100 Series Dual Processor 2.0GHz, 2.66GHz, 3.0GHz, Mac Pro 8-Core Intel Xeon 5300 Series Quad 3.0GHz, 13" MacBook (Late2006) Intel Core 2 Duo 1.83GHz, 2.0GHz, 13" MacBook (Mid 2007) Intel Core 2 Duo 2.0GHz, 2.16GHz, Mac Mini (Mid 2007) Intel Core 2 Duo 1.83GHz, 2.0GHz
Machine ID: iMac5,2, MacPro1,1, MacPro2,1, MacBook2,1, Macmini2,1
http://www.welovemacs.com/2z6916089a.html
Could you have installed some Server update in the past?

Problems with MacBook after Snow Leopard Update

I have an older macbook that I recently updated to snow leopard and since the update my fan is always running and my computer is slower in general. At times my computer starts having huge lag and all apps quit responding. This is incredibly frustrating and if anyone could help me fix this I would greatly appreciate it.
P.S. Since updating videos on youtube.com also will not play without lagging but movies on any other site are okay, even youtube videos embedded on other sites.

OSUstudent2013 wrote:
I'm not 100% sure what you mean by repair permissions but it's a 120GB hard drive and I have 65GB left.
user/applications/utilities/DiskUtility to repair permissions on your MacintoshHD--> first aid-->Repair Disk Permissions http://support.apple.com/kb/ht1452
You might also try deleting the dynamic loader shared cache. This sometimes can lead to apps bogging down and delays all around.
The easiest way to do this is a Safe Boot this will delete dyld cache among other things.
Follow the link for more info or hold down the Shift key at restart, keep it down and power back on. Keep Shift down all the way to the desktop. This starts your Mac, more slowly, and ask for log-in.
Then restart as normal, which will take noticeably longer as cache files get rebuilt. See if this helps.
Message was edited by: leroydouglas

Problems with iTunes on snow leopard.

I recently installed Snow Leopard and after having done so I downloaded iTunes and then installed it. I now have an icon on my desktop which is a small picture of a disk drive and says iTunes 10.1 underneath. However when I click on this to try to open iTunes it just opens a window which says install iTunes. I have installed it a number of times now and I still cannot open the programme. Any ideas? Thanks

Sounds like you're clicking on a disk image and that iTunes is already installed.
Look in your applications folder and launch iTunes from there.
If that works, you can trash the disk image on your desktop as its served it's function and iTunes has been installed.
Matt

I am having problems working with Mail in Snow Leopard

I have an iMac running 10.6.8. I was having problems booting up the computer, which I was able to overcome running Applejack. Then I noticed Mail malfunctioning. Followingg describes the problems:
1. Cannot open "About Mail".
2. Cnannot open Preferences; unable to check account settings.
3. Do receive most of incoming emails. For no known reason, outgoing servers go "Ofline". So, cannot send outgoing emails.
Will appreciate suggestions for fixing these problems.
Rajfromvienna

OK, so that's a marginal machine - dont spend TOO much on it. Solid, btu i think, for example, can;t run Lion or later OSes.
I have not worked on a modern imac myself. I'd go to google, bing or your favourite search engine and search "hard drive replacement Imac intel" and see what you find re: instructions.
In general though, its not all that complicated. Your manual may in fact tell you how to access it mechanically. If you have, as i think you do a "SATA" (serial ATA) hard drive, just buy one, open it up, remove the old, plug in the new and close it.
Of course, first do a complete abckup and MAKE SURE YOU CAN BOOT FROM THE BACKUP.
A drive shoudl be < $100. One of the most helpful, althoug not chepaest vendors, is OWC (Other World Computing). They can actually ehlp you with instructiosn and what works in your model. If oyu have questions, i suggest using a hgih service vendor such as them. no affiliation.
Grant

HP 6210 printer problems with upgrade to Snow Leopard

I have recently bought a new Macbook Pro with Snow Leapard and my HP printer 6210 gets errors when I try to print. (It worked fine with the old 10.5.x. OSX) I have uninstalled the old HP software, then installed the most current from the HP website and then done an Apple Software update. The error messages are:
E [20/Sep/2011:16:54:45 -0400] Unable to execute /Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/commandtohp : no execute permissions (0100664)
E [20/Sep/2011:16:54:45 -0400] [Job 96] Unable to start filter "/Library/Printers/hp/cups/filters/commandtohp.filter/Contents/MacOS/commandtoh p" - Operation not permitted.
E [20/Sep/2011:16:54:45 -0400] [Job 96] Stopping job because the scheduler could not execute a filter.
E [20/Sep/2011:16:54:49 -0400] Unable to execute /Library/Printers/hp/cups/Inkjet6.driver/Contents/MacOS/Inkjet6: no execute permissions (0100664)
E [20/Sep/2011:16:54:49 -0400] [Job 97] Unable to start filter "/Library/Printers/hp/cups/Inkjet6.driver/Contents/MacOS/Inkjet6" - Operation not permitted.
E [20/Sep/2011:16:54:49 -0400] [Job 97] Stopping job because the scheduler could not execute a filter.
E [20/Sep/2011:16:59:50 -0400] [Job 97] Stopping unresponsive job!
If anyone can help me get this running, I would greatly appreciate it!
PS: The scanner works fine and I can print "test" pages and use the printer utilities.
Thanks!
Bradley

Thanks to a posting from a similar problem about an HP Photosmart 2610, I was able get my problem solved:
I deleted the folder
/Library/Printers/hp
then restarted in "Safe Boot" mode to empty the trash, then I rebooted in normal mode.
Then I reinstalled the HP software and rebooted.
Then I did Software Update and rebooted.
Now everything works fine!

Problem with Mail in Snow Leopard

Similar Messages

Maybe you are looking for