Problem with mail with pictures.

Hi,
I got my iPhone last Thursday so there is still a lot for me to learn. However, I thought we could receive pictures in our emails on the iPhone. Am I wrong? My son's girlfriend sent me 2 pictures in an email and I thought I could view and download them right on the phone. Everytime I try to open that mail, it takes FOREVER to load and when it is loaded either sends me to the home screen or just freezes.
Has this happened to anyone else? Is there a limit on the file size maybe? & how would I know how big the pictures are anyway.
Thanks!

Hi viali,
That seemed to do the trick-Thanks!
Can I download them to the phone so they are in my photos?
Eleanor

Similar Messages

Problem sending mail with attachments???

Hi Everybody,
I have got a problem sending mail with attachments...
I am able to send a plain mail ... but when i am trying to send mail along with an attachment ... its not being sent....
its not showing any error it is simply hanging...
what should i do?
If u know any solns please do suggest me....
Thanks in advance

activation.jar is already there...
initially i wrote a swing program as a front end and it was working abs fine... in my sense it was properly sending mails along with the attachments...
when i changed the front-end to JSP handled by Servlets i am getting a problem...
and even the swing program stopped working ...
now swing program is getting compiled but it is hanging at run time showing an exception "Exception occured during event dispatching"
i dont understand what probably may be the problem...
if u can trace out, please give me any suggestions
Thanks in advance and regards

Problem for Mail with PDF attachment

Hello all,
I have a problem regarding sending mail with a PDF attachment from SAP. The attachment contains Payslip of employee that is being generated from a Submit program of the respective HRFORM. I have used the Submit program within a JOB and the spool request generated. From the spool request i am extracting the pages using FM RSPO_GET_PAGES_SPOOLJOB.
Now to convert the spool job to PDF am using FM CONVERT_OTFSPOOLJOB_2_PDF. And after the job is being finished, am deleting both the JOB and SPOOL.
To change the output of the FM CONVERT_OTFSPOOLJOB_2_PDF, into attachment with line width of 255 am using FM SX_TABLE_LINE_WIDTH_CHANGE. Then after filling all the required parameters for FM SO_DOCUMENT_SEND_API1, am sending the mail with the attachment. I have kept the format as PDF.
But the problem here is, the attachment is going as .DAT file and not as .PDF file!!!
Please help to resolve this issue.
with regards,
Koushik.

Hello,
Instead of using SO* APIs to send mail you should use the BCS classes. Anyway there is a sample program BCS_EXAMPLE_8 which is very similar to your requirement
Cheers,
Suhas
PS: The sample program BCS_EXAMPLE_6 has got more to do with PDF forms as is your case

Problem with Mail with attachments when sent to PC's

I am having problems when I send mail from Apple Mail with an attachment from my machine to a PC machine. I use the attach tab at the top, and I choose Windows friendly attachments. But for some reason when my recipient gets my message there is no attachment attached to the message. Is there something I am doing wrong? My recipients have there mail application set up all right, but for some reason they have issues with my messages which are meant to have attachments.

I also have this problem, when sending jpg's to a PC who is running outlook, and have their own MS mail server in-house.
When my mail arrives in her inbox, the attachments are embedded in the email, and when she right clicks they are called "Untitled" even though when I sent them, then had file names with .jpg extension.
And yes I have windows friendly on.
Any ideas anyone?
wilse

SMTP connection problems in mail with 10.4.7

I have been using Mail with no problems until updating to 10.4.7.
I am with BT Broadband for Business, using their SMTP server. I have checked that the update did not tick the SOCKS option in network preferences, but this remains unticked so is not the problem.
I know for sure that the SMTP settings are correct, and working, as my wife is able to send mail from Outlook on her PC using the same account with no problems.
I had this problem a couple of days ago, and fixed it by installing the latest combo update of 10.4.7. I tried this again as the problem re-occurred out of the blue, but this time applying the update is not fixing the problem.
This only applies to outgoing mail, incoming mail still arrives.
Can anyone help?
Thanks
Bob
PowerMac G5 2.0Ghz Dual Processor, 4Gb RAM Mac OS X (10.4.7)

I have been using Mail with no problems until updating to 10.4.7.
I am with BT Broadband for Business, using their SMTP server. I have checked that the update did not tick the SOCKS option in network preferences, but this remains unticked so is not the problem.
I know for sure that the SMTP settings are correct, and working, as my wife is able to send mail from Outlook on her PC using the same account with no problems.
I had this problem a couple of days ago, and fixed it by installing the latest combo update of 10.4.7. I tried this again as the problem re-occurred out of the blue, but this time applying the update is not fixing the problem.
This only applies to outgoing mail, incoming mail still arrives.
Can anyone help?
Thanks
Bob
PowerMac G5 2.0Ghz Dual Processor, 4Gb RAM Mac OS X (10.4.7)

Problem sending mail with roaming profile (Outlook 2010)

Hello all,
I hope you will be able to help me.
Here's the problem I have with Outlook 2010:
When a user opens a roaming profile on another
PC or on his new
PC, everything works perfectly except
Outlook.
Outlook opens normally with all email
accounts, you can even see the email, no worries
about that.
But when we want to send an email, it
gets stuck in the outbox.
Some additional info:
     - In the account settings,
you can test the account settings, it says
that everything is working (sending and receiving)
     - The only way I found today to
operate the account is to
completely remove and reconfigure
     - There is an error message
that says I can not write on the file C:\Users\UserName\AppData\Roaming\Microsoft\Outlook\accountName.pst
     - The problem occurs with
all users, not just one in particular
     - The accounts are IMAP
     - Incoming emails work
Thank you for your help.

Hi Tim,
This is a known issue in Outlook, we don't recommend using IMAP account with roaming profile.
For more information, you might want to read this similar thread:
https://social.technet.microsoft.com/Forums/office/en-US/f9b1bf03-d468-46e8-b40d-76fac11fd66c/outlook-2010-creates-new-imap-pst-files-at-random-and-cannot-send-mail-roaming-profiles-and-imap?forum=outlook
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Problem sending mail with ATTATCHMENTS

hi all,
Im doing something like this to send a mail with attatchments:
     msg.setRecipients(Message.RecipientType.TO, address);
     msg.setSubject(subj);
     MimeBodyPart textPart = new MimeBodyPart();
     textPart.setContent(text, "text/plain");
     File f = new File(filename);
     MimeBodyPart attachFilePart = new MimeBodyPart();
     FileDataSource fds = new FileDataSource(f);
     attachFilePart.setDataHandler(new DataHandler(fds));
     attachFilePart.setFileName(fds.getName());
     Multipart mp = new MimeMultipart();
     mp.addBodyPart(textPart);
     mp.addBodyPart(attachFilePart);
     msg.setContent(mp);
     Transport.send(msg);
this is working for the first time........
if I execute this for the second time.... my attatchments are visibile inside the message..... something like this...
------=_Part_28_1086341.1034758766530
sd
<br>fa
<br>sdf
<br>sd
<br>
------=_Part_28_1086341.1034758766530
Content-Disposition: attachment; filename="2day's Work.txt"
Today's tasks done:
OCR conversion for the following:
1) pages rescaned in 12th class part A.
2) pages 61- in 12th class part C.
------=_Part_28_1086341.1034758766530--
it is showing the attatchment content inside when i run the same code for the second time....
anyone can help me out!!!
thax in adv,
kiran

yup.. it worked navaz.....
thx a lot... may i know whatz happening here...
thx again...
kiran

Deal with mails with / without attachments

My codes actually can save the image attachment of emails from email server. But, one problem I have is the codes don't work for mails with no attachment. How can solve this? I have added the structure of how I coded it. I am not sure if I can modify the 2nd part of the codes such that mails without attachment can work too. Pls advise. thank.
My code pattern is like this:
1st part : Connection.
2nd part:
if (contentType.startswith("image/")){
//get the image and save to folder and insert path to image table of database
if (contentType.startswith("text/plain")){
// insert image id and text to another table of database
3rd part: Delete email.

I don' have the demo folder currently. Any sample code that can be posted here?
I tried
if(disposition == null){
//do this for emails with no attachment
else if (disp.equalsIgnoreCase(Part.ATTACHMENT)){
//do this with attachments
else{
out.println("invalid");
But it still can't work. The (disp == null) seems to pass in all values for both emails with attachments or no attachments....Why??

Problems sending mail with txt attachtment using SO_DOCUMENT_SEND_API1 MF

Hi gurus,
I allready tried to search in the forum some threads related with my problem, but i couldnt found any with the same problem that im having.
My problem it's when attachting an txt file, using MF SO_DOCUMENT_SEND_API1 MF, the mail attachtment it's coming with the txt file but instead of coming with the all lines in the contents_bins table the file it's coming with a few lines. I think the problem it's that the txt file should come with 80 characters per line, like it's on the contents_bin table, buu instead that the MF it's filling me each line of the file with 1024 characters.
Does anyone has ideas what im doing wrong?
Ps - Below goes my code.
Thanks in Advance,
Best Regards,
João Martins.
CLEAR contents_bin.
REFRESH contents_bin.
PERFORM get_attachment TABLES tab_movimentos contents_bin
                         USING linha_inicial
                         linha_final.
CLEAR: document_data, tab_lines.
MOVE 'Aviso Ficheiro Retorno' TO document_data-obj_descr.
MOVE 'Aviso Ficheiro de Retorno TU' TO document_data-obj_name.
DESCRIBE TABLE contents_txt LINES tab_lines.
READ TABLE contents_txt INDEX tab_lines.
document_data-doc_size = ( tab_lines - 1 ) * 255
                           + STRLEN( contents_txt ).
CLEAR packing_list.
REFRESH packing_list.
packing_list-transf_bin = space.
packing_list-head_start = 1.
packing_list-head_num = 0.
packing_list-body_start = 1.
DESCRIBE TABLE contents_txt LINES packing_list-body_num.
packing_list-doc_type = 'RAW'.
APPEND packing_list.
packing_list-transf_bin = 'X'.
packing_list-head_start = 1.
packing_list-head_num   = 1.
ADD 1 TO tab_lines.
packing_list-body_start = tab_lines.
CLEAR: lv_filename, tab_lines.
CONCATENATE 'Fich Retorno -' nome_ficheiro INTO lv_filename.
DESCRIBE TABLE contents_bin LINES tab_lines.
packing_list-doc_type   = 'TXT'.
packing_list-obj_descr = 'Ficheiro Retorno'.
packing_list-obj_name   = lv_filename.
packing_list-doc_size   = tab_lines * 255.
APPEND packing_list.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
       EXPORTING
            document_data              = document_data
            put_in_outbox              = 'X'
            sender_address             = 'SIFJOB'
            sender_address_type        = 'B'
       IMPORTING
            sent_to_all                = sent_to_all
       TABLES
            packing_list               = packing_list
            contents_bin               = contents_bin
            contents_txt               = contents_txt
            receivers                  = tab_receiver
       EXCEPTIONS
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            OTHERS                     = 8.
SUBMIT rsconn01 WITH mode = 'INT'
              WITH output = SPACE
              AND RETURN.
FORM get_attachment TABLES   p_tab_movimentos STRUCTURE
                             zlinha_movimentos_fich_retorno
                             p_contents_bin STRUCTURE contents_bin
                    USING    p_linha_inicial STRUCTURE
                             zlinha_inicial_ps2
                             p_linha_final STRUCTURE
                             zlinha_final_ps2.
DATA: lv_valor(14).
DATA : line(80) TYPE x.
CONCATENATE p_linha_inicial-referencia p_linha_inicial-tipo_registo
p_linha_inicial-tipo_operacao p_linha_inicial-situacao_conta
p_linha_inicial-situacao_registo p_linha_inicial-iban+4(21)
p_linha_inicial-moeda p_linha_inicial-data_pag
p_linha_inicial-ref_ordenante p_linha_inicial-filler
INTO p_contents_bin-line.
CLEAR line.
conv_bin p_contents_bin-line line.
MOVE line TO p_contents_bin-line.
APPEND p_contents_bin.
CLEAR p_contents_bin.
LOOP AT p_tab_movimentos.
    CLEAR: lv_valor.
    WRITE p_tab_movimentos-montante TO lv_valor.
    PERFORM normalize_value USING lv_valor.
    CONCATENATE p_tab_movimentos-referencia
      p_tab_movimentos-tipo_registo p_tab_movimentos-tipo_operacao
      p_tab_movimentos-sit_conta_retor p_tab_movimentos-situacao_registo
      p_tab_movimentos-nib lv_valor
      p_tab_movimentos-ref_ordenante p_tab_movimentos-filler
      INTO p_contents_bin-line.
    CLEAR line.
    conv_bin p_contents_bin-line line.
    MOVE line TO p_contents_bin-line.
    APPEND p_contents_bin.
    CLEAR p_contents_bin.
ENDLOOP.
CLEAR: lv_valor.
WRITE p_linha_final-mont_total TO lv_valor.
PERFORM normalize_value USING lv_valor.
CONCATENATE p_linha_final-referencia p_linha_final-tipo_registo
    p_linha_final-tipo_operacao p_linha_final-filler_1
    p_linha_final-situacao_registo p_linha_final-filler_2
    p_linha_final-total_reg lv_valor
    p_linha_final-filler INTO p_contents_bin-line.
CLEAR line.
conv_bin p_contents_bin-line line.
MOVE line TO p_contents_bin-line.
APPEND p_contents_bin.
CLEAR p_contents_bin.
ENDFORM.                    " get_attachment

Hi,
I've solved this problem. The problem was because i was using the
* Anexo - Descrição
packing_list-transf_bin = 'X'.
packing_list-head_start = 1. "Here it must be 0 because i wasn't using any table header
packing_list-head_num   = 0.
ADD 1 TO tab_lines.
packing_list-body_start = 1.
CLEAR: lv_filename, tab_lines.
CONCATENATE nome_ficheiro 'TB' INTO lv_filename.
* CONCATENATE 'Fich Retorno -' nome_ficheiro INTO lv_filename.
DESCRIBE TABLE contents_bin LINES tab_lines.
packing_list-doc_type   = 'TXT'.
packing_list-obj_descr = lv_filename."'Ficheiro Retorno'.
packing_list-obj_name   = lv_filename.
packing_list-body_num = tab_lines.
packing_list-doc_size   = tab_lines * 255.
APPEND packing_list.
Best Regards
Thanks,
João Martins

Problem in Mail with signatures

Has anyone experienced this?
I'm running Leopard and using two different user identities("A" and "B" on my macbook.
In one identity "A", I use signatures in Mail for two different email accounts. Sometimes I log out of identity "A" and use Mail in identity "B" with a third email address. After I send an e-mail in identity "B" and log back into identity "A" the signatures that were assigned to one of my email accounts are no longer assigned to the account. They are still there, but I have to reassign them to the account by logging back in to Mail preferences.
Any input would be great.

If you have them on your hard drive, don't just disable, but delete the fonts Helvetica Fractions and Times Phonetic.
It's also likely some of the fonts you added are either damaged or conflict with other system fonts. Remove all fonts you installed and note the result. Add them back 5 to 10 at a time and see if the problem reappears. If it does, you'll know at least one of the fonts you put back is bad.

Problem in Mail with iMac i5 OSX Lion

When i create a new email in Mail and select underline everything works well but when i try to deselect underline it wont do that, could somebody advice me on this problem, i have a iMac i5 with OSX Lion

Try completely closing Mail and then reopening Mail? (Mail-->Quit Mail)
or Command + U to toggle between underline on & underline off?

Problem Syncing Mail with iCloud

I have been unable to receive email from iCloud on my iMac since September 17,2012. On that date I set up my new Mac Book Pro with the same email address and Apple ID in iCloud. The form of my email address is [email protected] I used to have a MobileMe account which I moved to iCloud several months ago and it had been operating perfectly well. When I opened that account I used an existing email as my Apple ID in the form of [email protected] However, up to April 17, everything was working perfectly well. In addition, two days ago I bought a new iPad and set it up with the [email protected] Apple ID. I tried deleting the iCloud account from the iMac and doing everything from the ground up, but it does not work. The mail continues to search for something (you see the small wheel turning constantly as if searching for something) but it does not do anything. Mail in the Mac Book Pro is working perfectly well as is on the iPad and iPhone. What can I do?

Let me get this right, you got a mail problem 5 months from now and succeeded in fixing it 5 months before you got it. ?
Bruckner1 wrote:
I have been unable to receive email from iCloud on my iMac since September 17,2012.
Please take your time machine to next Tuesday and tell me the winning lottery numbers.

Problem Sending Mail With IPod Touch

AOL is my primary ISP. The settings for the incoming and outgoing server for AOL are definately correct as confirmed by my serivce provider.
But for some strange reason i can receive all my emails but can not send a single one. Each time i get the error message: "Te connection to the outgoing server "stmp.aol.com" failed".
I've tried deleting the account and re-adding it but to no avail.
It seems to work fine for Yahoo and GMail, just not for AOL.
Was wondering if other people have the same problem or just me.

I don't have AOL, but I initially had the same problem with Comcast. Then someone on this forum pointed out that, in the Mail setup, you have to put in your password for both ingoing and outgoing mail. It said the password for outgoing was "optional," but that was incorrect. Once I set the password for both, it worked fine. Maybe that's why some of you are having problems with other e-mail providers.

Problem sending mail with authentication

Please help as I've spent the last two days trying various things to solve my problem to no avail. I have been able to send email through the smtp server I have access to (just for interest, smtp.cs.stir.ac.uk), to email addresses in the same domain (e.g [email protected]) because the server does not require me to log in to do this - I can do it anonymously.
My problem comes when I try to send an email outwith the cs.stir.ac.uk subdomain, (e.g [email protected]) because it requires me to login. So I set about learning about authenticating with smtp servers using the javamail package, and I found two methods of doing it, both of which threw a javax.mail.AuthenticationFailedException. I believe this exception is only thrown when a username or password is wrong and I can't understand it because I'm definitely using the same user/pass combo as I do to log into my webmail. The stack trace for the exception is:
javax.mail.Service.connect(Service.java:264)
javax.mail.Service.connect(Service.java:134)
javax.mail.Service.connect(Service.java:86)
com.sun.mail.smtp.SMTPTransport.connect(SMTPTransport.java:144)
javax.mail.Transport.send0(Transport.java:150)
javax.mail.Transport.send(Transport.java:80)
EmailAuth.send(EmailAuth.java:80)
EmailAuth.<init>(EmailAuth.java:40)
EmailPanel.actionPerformed(EmailPanel.java:56)
javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1764)
javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1817)
javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:419)
javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:257)
javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
java.awt.Component.processMouseEvent(Component.java:5093)
java.awt.Component.processEvent(Component.java:4890)
java.awt.Container.processEvent(Container.java:1566)
java.awt.Component.dispatchEventImpl(Component.java:3598)
java.awt.Container.dispatchEventImpl(Container.java:1623)
java.awt.Component.dispatchEvent(Component.java:3439)
java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3450)
java.awt.LightweightDispatcher.processMouseEvent(Container.java:3165)
java.awt.LightweightDispatcher.dispatchEvent(Container.java:3095)
java.awt.Container.dispatchEventImpl(Container.java:1609)
java.awt.Window.dispatchEventImpl(Window.java:1585)
java.awt.Component.dispatchEvent(Component.java:3439)
java.awt.EventQueue.dispatchEvent(EventQueue.java:450)
java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:197)
java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144)
java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136)
java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
And the code I'm using is:
import javax.mail.*;
import javax.mail.internet.*;
import java.util.*;
import java.io.*;
public class EmailAuth
     public String uname;
     public String pword;
public EmailAuth(String host, String username, String password, String message,
          String subject, String from, String[] to) throws MessagingException {
            uname = username;
            pword = password;
            send(host, username, password, message, subject, from, to);
public void send( String host, String username, String password, String message,
          String subject, String from, String[] to) throws MessagingException
    boolean debug = false;
     Properties props = new Properties();
     props.put("mail.smtp.host", host);
     props.put("mail.smtp.auth", "true");
    Authenticator auth = new SMTPAuthenticator();
    Session session = Session.getDefaultInstance(props, auth);
    session.setDebug(debug);
     // create a message
    Message msg = new MimeMessage(session);
    // set the from and to address
    InternetAddress addressFrom = new InternetAddress(from);
    msg.setFrom(addressFrom);
    InternetAddress[] addressTo = new InternetAddress[to.length];
    for (int i = 0; i < to.length; i++)
        addressTo[i] = new InternetAddress(to);
msg.setRecipients(Message.RecipientType.TO, addressTo);
// Setting the Subject and Content Type
msg.setSubject(subject);
msg.setContent(message, "text/plain");
Transport.send(msg);
private class SMTPAuthenticator extends javax.mail.Authenticator
public PasswordAuthentication getPasswordAuthentication(String username, String password)
return new PasswordAuthentication(username, password);
Any help is greatly appreciated!!

try logging in to the SMTP server with that username/pwd manually. i've done this in win32 using telnet...
at the command prompt, enter "telnet mail.host.com 143", then from within telnet type "a1 login username password". the SMTP server should respond with something like "a1 OK LOGIN completed" if accepted. then, close the session by entering "a2 logout" (or just kill the telnet session).
the exchange should look like this:
telnet mail.host.com 143 * OK IMAP4rev1 server ready (3.0.14)
a1 login username password
a1 OK LOGIN completed
a2 logout
* BYE IMAP4rev1 Server logging out
a2 OK LOGOUT completed
Connection to host lost.
peace
bobD

Problems sending mail with my internet connection through my iphone

HI all,
right now i'm having problems, i can't send a email with my outlook for mac through my iphone connection... but i can receive emails with the same connection... any ideas?

Hi,
I've solved this problem. The problem was because i was using the
* Anexo - Descrição
packing_list-transf_bin = 'X'.
packing_list-head_start = 1. "Here it must be 0 because i wasn't using any table header
packing_list-head_num   = 0.
ADD 1 TO tab_lines.
packing_list-body_start = 1.
CLEAR: lv_filename, tab_lines.
CONCATENATE nome_ficheiro 'TB' INTO lv_filename.
* CONCATENATE 'Fich Retorno -' nome_ficheiro INTO lv_filename.
DESCRIBE TABLE contents_bin LINES tab_lines.
packing_list-doc_type   = 'TXT'.
packing_list-obj_descr = lv_filename."'Ficheiro Retorno'.
packing_list-obj_name   = lv_filename.
packing_list-body_num = tab_lines.
packing_list-doc_size   = tab_lines * 255.
APPEND packing_list.
Best Regards
Thanks,
João Martins

Problem with mail with pictures.

Similar Messages

Maybe you are looking for