Problem with Make file
I am working on recently upgraded Solaris 9 and I am using a make file to build an application using make �f brc.bld
It is giving the error : make: Fatal error in reader: brc.bld, line 9: Unexpected end of line seen
for the line in this build file : %Echo Begining execution of $(_script)
I am using cc for the make file ( cc: Forte Developer 7 C 5.4 ) and the make command
Any help in this regard is appreciated.
Regards,
Vivek
Hi,
I am not able to find error message related to brc.bld. If a test case could be provided, that will be helpful.
Or please try our most recent version Sun Studio 10(Trial Downloads http://www.sun.com/download/products.xml?id=41e70b09) to see whether that fixes the problem.
Thanks.
Rose
Similar Messages
-
Problems with .ARW files and auto toning
problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the helpsorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place. -
Error: There is a problem with the file and it cannot be copied
I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything! -
[SkyDrive] Files can't be uploaded because there's a problem with a file or folder.
On Windows 8.1 RTM, the SkyDrive metro client shows a message that "Files can't be uploaded because there's a problem with a file or folder." and lists one particular file. When I installed the PC, I have switched then Access all files offline
option to On.
The file resides in a directory I have deleted from the disk. When attempting to get rid of this "problem" (as there are no hints nor UI available) I have manually checked that the directory does not exists on the disk any more, as well as deleting
the directory from cloud storage using a web browser. However, the message is still there.
Restarting the computer several times nor keeping it idle for a significant amount of time did not help.
How to get rid of that "problem" / how to fix it?Hi
Let’s try to redirect the skydrive folder and sync again to see what’s going on:
1. Open regedit and find following key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\SkyDrive
2. Change “UserFolder” to another location.
3. Open the SkyDrive Metro app to confirm your files and new directory.
Then check the issue again.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Problem with Offline Files with Cisco NSS322 (firmware 1.3)
Hi
We've recently bought a new NSS322 NAS box to replace an ageing Windows SBS 2003 file server. We've upgraded the firmware to 1.3, and begun moving files across from the Windows server to the new NAS box. However, we're having a problem with Offline Files on the NAS, as attempting to make directories available offline on Windows clients (only tried Vista Business 32-bit so far) we get loads of errors stating that these files cannot be made available offline "because they are in use" (or something like that).
Any suggestions as to why this might be? It doesn't appear to affect all files, but most of them.
I've read somewhere that the "allow oplocks" setting can affect this if disabled, but it is already enabled on the device, so this can't be the cause of the problem.
Any help you could provide would be much appreciated, as at the moment this issue is rendering our NAS unusable as we rely heavily on the offline files functionality.
Thanks in advance.
I have some more information - this appears to be related to the ownership permissions of the files on the NAS. New files created on the NAS can be made available offline, and have the ownership of the person who created the file, however, the files we moved across from the server are all listed as being owned by the user "guest" (I think this may be related to the fact that when we moved the files over, the user was logged in as "admin" rather than a user on the AD Domain). I should be able to resolve this through changing the owner of the files on the NAS, but I can't seem to do this, as I get an "access denied" error each time I try to change ownership.
Message was edited by: redcitrus
Is there any chance someone's going to be able to help me with this? I've currently spent £500 on a box that I can't use. If it can't handle Offline Files satisfactorily, it's no use to us.
I've been looking at this a bit more - if appears that each user can make files they have created available offline, but files created by other people cannot - the error message that appears is: "The process cannot access the file because it is being used by another process".
I'm getting desperate here...can anyone help?
Message was edited by: redcitrusSorry, but I don1 speak very good english..
I was Try this quick test: As a quick test, you can do a forward all and make sure you can get into the ftp server.
but result it is to same.
I think, that problem is in firmware, becasue I know more people who own this router with to same firmware version (2.0.1.3), and have they to same problem how I.
I have DISABLED FIREWALL on my router and problem hold over.
If I replace router Cisco Linksys WRVS4400N by Ovislink router or any other, issue (problem) already no is.
Configuration in Cisco Linksys WRVS4400N and configurations in any other router is to same, but FTP connection via Cisco Lynksys always will crash.
If I connect to any other FTP server, sometimes requieres from me ftp login and password. It is OK, but if I assign login and password, after connect me to this FTP server, i see folders and files on this server, but without reason connecting fall down.
Few seconds later if I connect to the to same FTP server, sometime either not request login and password and connection fall down. -
Problem with NEF files from Nikon D4
Hi everyone. I find a problem with nef files from my Nikon D4. When files are open in ViewNX2 (free viewer software from Nikon) they are perfect, as shooted... but in ACR they are very different... I use LR4 or CS5 with ACR 6.7 and the difference seems to be linked at D-Lighting function. My impression is that ACR dont read this option and picture are very very dark that original shootings. Anyone have this problem?
This question used to be answered in the FAQ before they revised it. So, here we go again. ViewNX is capable of reading all of the in-camera settings such as, camera profile, saturation, sharpness and other settings. It is capable of doing this because it is Nikon Software, and they have the ability to program it to read the settings from their raw images. Lightroom does not read those settings from Nikon cameras or any other brand of camera. Part of the reason is that different camera makers store those settings differently.
When I first started using Lightroom I adjusted one of my images that represented what I normally shoot until it looked the way I wanted it. Then I saved those adjustments as my default settings for the camera. From that point onward, whenever I import images those settings are automatically applied, and it takes care of the vast majority of my images. Of course, I still have to make individual adjustments. But my default settings greatly reduce the amount of how they work that I have to do.
Active D-lighting is is one of those features that Lightroom does not recognize. You would be well advised not to use it, or else create a preset to simulate its effect. It will provide no benefit to your Lightroom work.
This is a fundamental difference with Lightroom, and something that must be understood and implemented if you are going to use the program effectively.
I realize this question was asked in the ACR forum and I referenced Lightroom throughout. But the principle is the same, and the recommended procedure is the same. -
Adobe Send - Problem with uploading files. When is this going to get fixed?
When is the Adobe Send problem with uploading files going to get fixed. Similar to others - I have tried and tried to make Adobe Send work and get an error. I have tried to upload the file and it looks like it uploads and then - it is nowhere to be found.
I then go to Adobe Send Now and it works fine.The problem is the same as described in other similar threads.
I have a 57 MB PowerPoint file I am trying to send using Adobe Send. I go through the normal steps to identify the file and select recipients and then send the file. After the file completes the upload - an error saying there was a problem comes up and the file is not uploaded.
I have tried to upload the file to the site with similar results - error and the file doesn't go.
I can go to the old SendNow site and it works flawlessly.
If I need to get screenshots - let me know. There are several other threads describing this same problem. It isn't something new or not heard of before.
Sent from my iPod -
I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205) please help
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Problems with compressing files with right hand click. it does not work.
Problems with compressing files with right hand click.
I am using the compress function in the Mac OS (File > Compress XX) from time to time. Today it does not work anymore. OS 10.5.6
I get a message: The content list cannot be created for compressing.
I tried it with files and folders and keep getting this message. Anybody any idea as to how to fix thisThanks I love my macbook!!!!
I also got further problems such as copy-paste not working etc.
so I fixed it just this morning by running Applejack 1.5 and am back up running noticing your post.
thanks for helping though! -
Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
Button=new JButton(Upload);
Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
int returnVal = fc.showOpenDialog(ActionDemo4.this);
if (returnVal == JFileChooser.APPROVE_OPTION) {
File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
textArea3.append(aa);
textArea2.append("Local URL:");
long l=file.length();
try
byte buff[]=new byte[(int)file.length()];
InputStream fileIn=new FileInputStream(aa);
int i=fileIn.read(buff);
String conffile=new String(buff);
String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
urlConn = url.openConnection();
urlConn.setDoInput (true);
urlConn.setDoOutput (true);
urlConn.setUseCaches (false);
urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
BikashThe errors are here:
byte buff[]=new byte[(int)file.length()];
InputStream fileIn=new FileInputStream(aa);
int i=fileIn.read(buff);
String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ...... -
What is the exact problem with this file?
Hi all,
There is an old form , which was not in use from many days.
Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
The login button has the following code:
DECLARE
UNAME VARCHAR2(30);
--USER_ID PARAMLIST;
V_USER APUSERMA.USER_NAME%TYPE;
V_PASSWED APUSERMA.USER_PASSWD%TYPE;
BEGIN
select user_CD INTO :GLOBAL.USER_ID from apuserma
where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
:global.compname := :compname;
compnm(:compname);
--USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
exception
when no_data_found then
MESSAGE('Incorrect Username or Password. Please Re-Enter');
message(' ');
RAISE FORM_TRIGGER_FAILURE;
END;
EXIT_FORM;
When i tried to compile, i got error saying ,
Error 201 at line 10, column 28
identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
I am not getting to know What is the exact problem with this file?
Help me with this please.
Thank You.
Oracle forms builder 6i.
Oracle 9i.Vijetha wrote:
I also want to know what is the use of win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
What does it do??
If i comment the following line , will it be a problem??
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
Because i commented the above line & compiled, so it is not giving any error now.
So please tell me what win_api_environment.read_registry does??
it's read windows registry value. So, no problem if you comment it.
Thanks -
Problem with Receiver File adapter
Hi
I have a problem with receiver file FTP adapter, while writting file in target folder, connection is failing, after retries, it writting file again. How to avoid this situation, is there any way to write the leftout part in the file.
VSHi
Thank u all, Problem is solved, i changed write mode to Over write existing file. It is working fine.
VS -
Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem
Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy -
Problem with import file type setting
Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?
-
Problem with URL File download
Hi every one i am facing a problem with URL File read Technique
import java.awt.Color;
import java.io.DataOutputStream;
import java.io.File;
import java.io.FileOutputStream;
import java.io.InputStream;
import java.net.URL;
import java.net.URLConnection;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JProgressBar;
public class JarDownloader
boolean isSuccess = false;
public JarDownloader(String url)
downloadJar(url);
public boolean isDownloadingSuccess()
return isSuccess;
private File deleteExistingFile(String filename)
File jarf = new File(filename);
if(jarf.exists())
jarf.delete();
return jarf;
public static void main(String args[]){
new JarDownloader("url/filename.extension");
private void downloadJar(String url)
try
URL jarurl = new URL(url);
URLConnection urlc = jarurl.openConnection();
urlc.setUseCaches(false);
urlc.setDefaultUseCaches(false);
InputStream inst = urlc.getInputStream();
int totlength = urlc.getContentLength();
System.out.println("Total length "+totlength);
// If the size is less than 10 kb that means the linkis wrong
if(totlength<=10*1024)throw new Exception("Wrong Link");
JFrame jw =new JFrame("Livehelp-Download");
JPanel jp =new JPanel();
jp.setLayout(null);
JLabel jl = new JLabel("Downloading required file(s)...",JLabel.CENTER);
jl.setBounds(10,10,200,50);
jp.add(jl);
JProgressBar jpbar = new JProgressBar(0,totlength);
jpbar.setBorderPainted(true);
jpbar.setStringPainted(true);
jpbar.setBounds(10,70,200,30);
jpbar.setBackground(Color.BLUE);
jp.add(jpbar);
jw.setContentPane(jp);
jw.pack();
jw.setResizable(false);
jw.setDefaultCloseOperation(JFrame.DO_NOTHING_ON_CLOSE);
jw.setLocationRelativeTo(null);
jw.setSize(220,150);
jw.setVisible(true);
int readlngth=0;
int position=0;
byte[] readbytes = new byte[totlength];
while(totlength-position > 0)
readlngth = inst.read(readbytes,position,totlength-position);
position+=readlngth;
jpbar.setValue(position);
File jarf = deleteExistingFile(filename);
jarf.createNewFile();
//FileWriter fwriter=new FileWriter(jarf,true);
FileOutputStream fout = new FileOutputStream(jarf,true);
DataOutputStream dout = new DataOutputStream(fout);
dout.write(readbytes);
dout.flush();
dout.close();
inst.close();
jw.setVisible(false);
jw.dispose();
isSuccess=true;
}catch(Exception ex)
isSuccess=false;
}From the above code i received the total length of the PAGE content (i.e here url is a file) when i tried to find the size of that file it return -1.
please help meI think the real problem is that you don't check the return value from read (it's probably less than data.length indicating an incomplete read). Isn't there a readFully somewhere?
Maybe you are looking for
-
Posting multiple idocs without BPM
Hi all, We have a JDBC->XI->Idoc scenario. We would like to post "n" idocs to SAP for the "n" records fetched from database. Due to performance issues we are not using BPM. Is there any other way to post multiple idocs without using BPM. rgds Prashan
-
C :\caravan\releases\2014.09\adobe\mediacore\mediacore\mediafoundation\api\inc\k
-
Hp pavilion dv7-4177nr boot up with black screen
I have laptop listed above. For the past 3 days I hasn't not been able to get it in. it sounds like its starting but the screen stays black. Recently installed antivirus on 01/01/2012 because I had some kind of worm/malware. Windows 7 is the OS. Cap
-
InDesign CC Überdruckenvorschau pixelsalat ?
Hallo Zusammen Wenn ich auf meinem MacBook Pro Retina 15" im InDesign CC die Überdruckenvorschau aktiviere, erhalte ich eine wesentlich verpixeltere Ansicht meiner Dokumente als in der Normal-Ansicht. Sogar die Schriften werde verpixelt bei der Überd
-
How can I make word document window bigger. Have tried dragging bottom corner out & clicking on '+' sign but this does nothing?