Problem with make in cpan and OS 10.5.6
Hi, my Perl installation of DBD::mysql was just broken by installing 10.5.5 and then 10.5.6 over 10.4.11. No problem, I thought, just install the new one from cpan and I'm on my way. Not so fast, is what cpan says. Or, to be more specific, this is what cpan says:
"Writing Makefile for DBD::mysql
make: * No rule to make target `/System/Library/Perl/5.8.8/darwin-thread-multi-2level/CORE/config.h', needed by `Makefile'. Stop.
/usr/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible"
Same if I try to reinstall DBI. Any ideas? Is make broken (well, forget that question...;-)?
ok, I just installed XCode Tools from the 10.5.5 installer DVD, that took care of the make problem. DBI and DBD::mysql installed without a hitch and all my programs are up & running. Apache2 rocks, it's all like lightyears faster than the WebServer on my PowerBook 12". I'm starting to like this... Well, maybe it also had to do with the PB being slower and all, but I doubt it.
Do I get a cookie/star now, for having answered my own question? :-D
Similar Messages
-
I have a £50 gift voucher and I tried to buy something with it, but it tells me there was a billing problem with a previous purchase and makes me put in my debit card details. My debit card has no money atm, can't I just pay with my voucher for the things that have a billing problem? I tried to put my voucher code in again but it won't let me do that.
If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account. -
After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.columbus new boy wrote:
How crap is that?
It's not crap at all.
It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
There has to be a solution.
Why not simply make a playlist with the songs you want on the iPhone?
and maintain a current backup of your computer. -
I tried downloading a free app and it asked for my billing information and when I entered it, it said that there was a billing problem with a previous purchase and I have to update it. I keep updating it and it wont let me verify it and I cant get any apps even if they are free, and I just Deleted some apps to make room for my new upate!
The message says: "The payment method has been denied, try another method"
I'm living in the same country and city since I was born, so I don't think the location is the problem.
And yes, I paid with the card a meal in Burguer King today. And nothing more. -
nowadays have many user have problem with update to ios7 and need active with apple id maybe in the future in order escape from these problems must be stop use these products else. Because of simple user don't know about this technology and sometime just hear from other user that it 's difficult to use then force they change phone that use to handle to another.
It is a feature to discourage the theft of iPhones by making them useless if resold. It's not going anywhere. It's simple: just don't buy a phone until you make sure that the activation lock has been disabled.
-
I have a problem with the effect gallery and the saving libraries in Illustrator CS6
Hi everybody
I have a problem with the effect gallery and the saving libraries in Illustrator
1. When you go to to effects > effect Gallery the the sketch filter always is black and white. Is this normal? In Photoshop you can set your background and foreground and the sketch effects takes those colors. Is there any way to do this in Illustrator? I have tried changing the colour of the fill and stroke but nothing...
2. In the same area as before effects > effect Gallery .... In Photoshop you can add multiple filters with the create new button. Always is off is there anyway to make it available? or the only way is to by creating several individual ones and manage then in the appearance panel ...
3. I saved a brush library and now it appears in the user defined area so I can get it in any document, that is good but any one knows how to delete a user undefined library?
Many thanks in advance for the help .... I look forward for the reply =)I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
Please, somebody, HELP. -
I'm having problems with Flash Videos (Youtube and ESPN)
I have been having this problem for the last couple of days now and it is really annoying. Whenever I watch a flash video like on youtube or espn my computer freezes up and the audio will make a loud buzzing sound. I have attached a video with the post so you can see what happens. I don't have problems with anything else except this. I also get this error no matter what browser I use. I have system restored my PC as far as I can go, and I've ran a ton of scans and driver update checks and nothing seems to work.
merci a tous pour les nombreuses réponse. j'ai dû mal a les lire vue que je ne lit que le français. je vous remercié encore une fois amicalement. Blanchette 2.
Date: Mon, 25 Jul 2011 19:50:19 -0600
From: [email protected]
To: [email protected]
Subject: Re: I'm having problems with Flash Videos (Youtube and ESPN)
What I meant is Hardware Acceleration off (disabled).
> -
Wireless printing problems with 10.5.4 and Epson printers
Anyone else know about problems with Epson printers such as this no longer functioning wirelessly with bonjour once upgrade to 10.5.4? It appears they are not supporting this with a new driver yet?
At this time, Epson says they have no drivers for 10.5 and this specific printer but wondered if there are more general problems with 10.5.4 and bonjour with Epson or others?
Thanks
Paul
MacBook Pro Mac OS X (10.5.4) Using Epson CX11-NF printerI have 5 computers-G4 PowerPC, two G4 12" laptops, G5 Mac Pro dual, Macbook Pro--with the older computers all running 10.4.11, the new ones 10.5.4. Until Friday, I was able to print with all of them to an Epson Stylus Photo R200 via Airport Extreme. After installing software for my new G3 iPhone on the G5 Mac Pro the printer connections on all the computers stopped working. I have so far been able to get the G4 Power PC to print, but none of the others. I have tried Bonjour, Gimp-print v.5.0.0-beta 2, cleared all the print drivers and restarted, and everything else I have been able to find on both Epson and Apple sites. The Printer Set Utility described by Epson does not exist in Leopard machines, and doesn't work for the older laptops. As soon as I select one of the printers in the "selected printer in print dialogue box" it grays out. I have set up sharing on the G4Power PC that does print, but it is not accessible--it shows up but is grayed out. There is a diamond next to the printers in the Print dialogue box in applications' menus, but it still doesn't work. It either cannot make the connection, cannot find the printer, or keeps spinning with the message that it is finishing printing (but it hasn't even started.) Again, everything worked fine until the new iPhone was added to the mix. My old iPhone didn't cause any problems. This is really a problem. Any suggestions welcome.
-
I have a problem with mi iPad 3 and iCloud.
I have a problem with my iPad 3 and iCloud.
First. When i try to turn on the automatico downloads of apps and music on my ipad ican't. I put on the buttons but they automaticly turn into off.
Second. I have an macbook with iWork and mi iPad has iWork too but i can use iCloud because the documents that i create in the iPad doen't go online.
I did a little research and i think the troubles are because apple didn't associate mi ipad with my apple id, i had retored mi ipad a lot of times and it doen's fix the problem.
What do i can do?
I'm sorry but i'm learning english, so i'm sorry if you have a hard time trying to understand.
Thank youHi Omar1510,
If resetting your iPad allows it to charge, but only temporarily, you may want to make sure that you have your data backed up and try restoring the device (you may want to test the charging before reloading your data). You may find the following article helpful:
iTunes: Restoring iOS software
http://support.apple.com/kb/HT1414
Regards,
- Brenden -
Why I had no problems with the VZW employees and other people have?
I think that most people who cannot resolve problems with the VZW have an attitude problem.
Wise saying: you can get more with honey than with vinegar.
Since I “upgraded” my old Samsung Sway to a new Samsung Intensity III, in the past three weeks I spent many hours dealing with the VZW store employees, customer service reps, and tech support people. The phone was replaced two times, and I had no problem getting the replacements.
The third phone did not working how I expected.
Today I called VZW customer service and said I don’t need anymore trouble shooting and I wanted find a resolution, which will be satisfactory to both of us. After a short conversation with a customer service rep, I was connected with a tech support. I told him that I don’t need any more trouble shooting on the Samsung Intensity III because I already spent HOURS doing that on three devices.
We spoke about what the VZW could offer me, about replacements with different phones, etc. Our conversation ended with me offering the resolution that could satisfy me, which was to keep this phone and my account will be credited for the $30.00 “upgrade” fee and I will buy Samsung Sway on eBay. NO PROBLEM.
My account was credited and I was advise about the ESN number and activation.
Why I had no problems with the VZW employees and other people have? The answer is simple. I did not have attitude when I was spoke to them.
So if you want the problem to be resolved, put your anger in you pocket before you start the conversation. You can say that you are angry, frustrated, etc like I did, but add that you understand that this is not their fault that the manufactures makes a crap phones.Yes, you are right. I lost my upgrade. Also, it’s true that I could buy the phone on eBay… if I knew then what I know now. In the past, I never had problem with any of my phones. Doing an upgrade with the VZW was a normal thing for me. I didn’t expect that Samsung Intensity III would be a junk phone. My last upgrade was 4 years ago. I had $50.00 ‘new every two’ credit on my account, which was used for an upgrade. I lost the $50.00 credit paying for Samsung Intensity III. Sometimes we learn from our mistakes or from a bad experience. Three weeks ago I did not know that I could buy a phone on eBay and activate with VZW without paying $30.00.
Samsung Sway is coming from …eBay – keep your fingers crossed for me. -
What is the problem with Western Digital HDD and OS X.9?
I received an email from Western Digital saying that OS X.9 could cause my files on my WD drives to be erased and to unplug all my WD drives until a fix is done. Is this a real problem and if so when will Apple get the fix out. I have joibs I have to get out to clients and this is a major problem for me.
Western Digital has found that their applications have got serious compatibility problems with OS X Mavericks, and they have to be updated to make them compatible with Mavericks.
Until then, keep the OS X version you have got. This is a Western Digital problem and this is why your main computer shouldn't be upgraded just after the release of a new Mac OS X version -
I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.
Please authorize ADE 3 with same credentials that you used with older version of ADE
-
I have been trying to download apps from the app store and every time it tells me there is a problem with my previous billing and direct me to put in new billing information and every time i do that it still will not let me download any apps.
Have a look here > http://support.apple.com/kb/TS1646
-
Communication problem with Adobe 9.0 and HP Printer when I scan
I'm having a problem getting a .pdf file to come up when I scan from a HP 5610 All-in-one printer. Have uninstalled and reinstalled HP software three times but when I scan and want a pdf file it won't communicate with Adobe 9.0 reader for some reason. Is there a setting in Adobe reader that's a problem?
Thanks.Thanks...found out that an HP5610xi All-in-One will not completely communicate with Adobe 9.0 Had to go to Adobe 6.0
Date: Thu, 17 Dec 2009 03:19:49 -0700
From: [email protected]
To: [email protected]
Subject: Communication problem with Adobe 9.0 and HP Printer when I scan
May be that the HP software doesn't support Adobe Reader 9.
> -
Problem with java swing button and loop
Problem with java swing button and loop
I�m using VAJ 4.0. and I�m doing normal GUI application. I have next problem.
I have in the same class two jswing buttons named start (ivjGStart) and stop (ivjGStop) and private static int field named Status where initial value is 0. This buttons should work something like this:
When I click on start button it must do next:
Start button must set disenabled and Stop button must set enabled and selected. Field status is set to 1, because this is a condition in next procedure in some loop. And then procedure named IzvajajNeprekinjeno() is invoked.
And when I click on stop button it must do next:
Start button must set enabled and selected and Stop button must set disenabled.
Field status is set to 0.
This works everything fine without loop �do .. while� inside the procedure IzvajajNeprekinjeno(). But when used this loop the start button all the time stay (like) pressed. And this means that a can�t stop my loop.
There is java code, so you can get better picture:
/** start button */
public void gStart_ActionEvents() {
try {
ivjGStart.setEnabled(false);
ivjGStop.setEnabled(true);
ivjGStop.setSelected(true);
getJTextPane1().setText("Program is running ...");
Status = 1;
} catch (Exception e) {}
/** stop button */
public void gStop_ActionEvents() {
try {
ivjGStart.setEnabled(true);
ivjGStart.setSelected(true);
ivjGStop.setEnabled(false);
getJTextPane1().setText("Program is NOT running ...");
Status = 0;
} catch (Exception e) {
/** procedure IzvajajNeprekinjeno() */
public void IzvajajNeprekinjeno() { //RunLoop
try {
int zamik = 2000; //delay
do {
Thread.sleep(zamik);
PreberiDat(); //procedure
} while (Status == 1);
} catch (Exception e) {
So, I'm asking what I have to do, that start button will not all the time stay pressed? Or some other aspect of solving this problem.
Any help will be appreciated.
Best regards,
TomiThis is a multi thread problem. When you start the gui, it is running in one thread. Lets call that GUI_Thread so we know what we are talking about.
Since java is task-based this will happen if you do like this:
1. Button "Start" is pressed. Thread running: GUI_Thread
2. Event gStart_ActionEvents() called. Thread running: GUI_Thread
3. Method IzvajajNeprekinjeno() called. Thread running: GUI_Thread
4. Sleep in method IzvajajNeprekinjeno() on thread GUI_Thread
5. Call PreberiDat(). Thread running: GUI_Thread
6. Check status. If == 1, go tho 4. Thread running: GUI_Thread.
Since the method IzvajajNeprekinjeno() (what does that mean?) and the GUI is running in the same thread and the event that the Start button has thrown isn't done yet, the program will go on in the IzvajajNeprekinjeno() method forever and never let you press the Stop-button.
What you have to do is do put either the GUI in a thread of its own or start a new thread that will do the task of the IzvajajNeprekinjeno() method.
http://java.sun.com/docs/books/tutorial/uiswing/index.html
This tutorial explains how to build a multi threaded gui.
/Lime
Maybe you are looking for
-
Hi, I have a procedure which is defined as below CREATE OR REPLACE PROCEDURE PURGEDB DAYS_IN IN NUMBER ) AS CURR_DT_TIME varchar2(20); BEGIN select (sysdate - DAYS_IN) into CURR_DT_TIME from dual; delete from a where STRT_DT_TME < CURR_DT_TIME; delet
-
I'm using JDeveloper 10.1.3 ADF and JSF to create a page with a tree and a table. I need to add a code to link them in a way when I click on a tree leaf, it would populate the table. I want to override the DisclosureListener code. I need to find a va
-
My time capsule just quit, what could it be
anyone? what about all my files?
-
Partner determination for sales document item
Hi people We have a partner function in sales order (carrier) that must be determinate by item, this is necessary because we sell different materias in the same order that can't be transported by the same carrier. In customizing Partner Determination
-
How to obtain all users have logged BIEE
How to obtain BIEE all users have logged, now I want to prevent users from repeated login, who knows