Problem with making text 3D

Making text a 3d repousse object is easy enough, but if I add filters to the text, select it and then try to make a repousse object FROM the selection, the text gets rendered in 3d, but
there is no hole between letters like O and P and A. Is there anyway I can cut holes into these letters? If not then how else can I make 3d text with filters on them?
Any help would be greatly appreciated, Thanks

See if this helps:
http://forums.adobe.com/message/4238532#4238532

Similar Messages

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

A problem with copying text from english pdf to a word file

i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

Problem with selecting text in Adobe Reader XI

Hi all, I am encountering a problem with Adobe Reader XI and it is very strange I could not find an alike issue on the internet so I guess I have to submit a question with it.
So here it is, I am using Adobe Reader XI Version 11.0.2, operating system: Windows 7. I do not know it starts from when but it has the problem with selecting text - to be copied in pdf documents. I ensure that the documents are not scanned documents but word-based documents (or whatever you call it, sorry I cannot think of a proper name for it).
Normally, you will select the text/paragraph you want to copy and the text/paragraph will be highlighted, but the problem in this case that I cannot select the text/paragraph, the blinking pointer (| <-- blinking pointer) will just stays at the same location so I cannot select/highlight anything to be copied. It happens oftenly, not all the time but 90%.
This is very annoying as my work involves very much with copying text from pdf documents, I have to close the pdf file and then open it again so I can select the text but then after the first copying or second (if I am lucky), the problem happens again. For a few text I have to type it myself, for a paragraph I have to close all opening pdf documents and open again so I could select the paragraph to copy. I ran out of my patience for this, it causes trouble and extra time for me just to copying those texts from pdf documents. Does this problem happen to anyone and do you have a solution for this? I would much appreciate if you could help me out, thank you!

Yeah, I totally agree, this is very strange. I have always been using Adobe Reader but this problem only occurred ~three months ago. It must be that some software newly installed I think. But I have no idea.
About your additional question, after selecting the texts and Ctrl + C, the texts are copied and nothing strange happens. It's just that right after I managed to copy the texts, it takes me a while to be able to select the texts again. For your information, I just tested to select the texts and then pressed Ctrl, the problem happened. And then I tried pressing C and then others letters, it all led to the problem.
I guess I have to stick with left-clicked + Copy until I/someone figure the source of this problem. Thanks a lot for your help!

Problem with append += text in Text Field

Hi guys
i have a problem with append text.
I have one array which contain some city names, like CityArea=["NAME 1", "NAME2" ...etc];
Then i have one String and one Text Field.
Using for loop im getting right results. But when im running script again then im getting same text again.
F.ex.
First time:
City name: Name 1
City name: Name 2
Second time:
City name: Name 1
City name: Name 2
City name: Name 1
City name: Name 2
I have tried to make TextField to and String to Null and delete it, but it's appearing again.. :/
How to avoid this?
Here is script:
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
_CityAreaTF1 = new TextField();
_CityAreaTF1.border = true;
_CityAreaTF1.wordWrap = true;
_CityAreaTF1.multiline = true;
_CityAreaTF1.selectable = false;
_CityAreaTF1.antiAliasType = AntiAliasType.ADVANCED;
_CityAreaTF1.name = "CityAreaTF1";
_CityAreaTF1.embedFonts = true;
_CityAreaTF1.htmlText = _CityAreaString1.toUpperCase();

I think i found why.
There was no problem with TextField.
There was a problem with Array. "CityArea"
So each time I executed script it added new string in Array. And that is because i got like:
TextField
City 1
City 2
City 1
City 2
Running this script is Ok:
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
But outside of this for loop there is another for loop for adding Cities in CityArray.
I fixed it by adding empty array at the start of function
function myFunc():void
CityArea = [ ]; // Empty array fixed this issue
// LOOP FOR ADDING SHOPS IN CITY AREA
for (var j:int = 0; j < _Shops; j++)
CityArea.push(_Shop);
// FOR LOOP TO ADDING SHOPS IN STRING
for (var i1:int = 0; i1 < CityArea.length; i1++)
_CityAreaString1 += " "+CityArea[i1]+"";
_CityAreaString1 += " ";
Thank you for your help kglad

CS3 - Problem with dynamic text -

Hello,
I have a problems with my text, when i write a few ligne inside a dynamic text box, if i selec the text and by the way drag it down the first line goes up and disapear. Is there any way to solve this?

This is the Flash Player forum; please post your question in the appropriate product forum.

Problem with making a database link.

Hello All
I got a problem with making a database link.
When I execute this query
CREATE PUBLIC DATABASE LINK DBNAME
CONNECT TO database IDENTIFIED BY name
USING 'DBNAME.europe.company.com';
I am using other names because its private information
But when I look at the table dba_db_links I see this
OWNER | DB_LINK | USERNAME |HOST
PUBLIC| DBNAME.europe.company.com| name| DBNAME.europe.company.com
So the DB_Link name is changed. And this causes a problem with my asp website. I get the fault message
ORA-02085: database link DBNAME.europe.company.com connects to DBNAME
Cause: a database link connected to a database with a different name. The connection is rejected.
The global_names = true and I prefer to keep it that way.
So does anyone knows what is wrong about my Query or how I can change the DB_Link name.
Thanks for the support,
Remco

Thanks for the help Mohit
But thats whats I was doing.
The query in the first post is the same as what you are posting.
But by an (for me) unknown reason the database converts DBNAME to DBNAME.europe.company.com

Problem with the text from previous year in current year appraisal (PPR)

Hi Gurus,
I have some problem with the text from the PPR of the previous year in the PPR current year.
The text from the previous year have not the same displaying in the tab "previous year" of the current year PPR.
EXAMPLE :
this is write in the PPR of year 2009 in Individual Targets without Incentives (tab My S-imple) :
-Aufrechterhaltung der MA motivation, in dieser Zeit der Neuorientierung.
-G1 Unterstüzung
-Fachübergreifende Teamarbeit ausbauen
Gefährdungsbeurteilung weiter führen
-tragen von PSA einfordern
-VI Opt.(Intervalle)
-Azubi und Praktikanten AUsbildung unterstüzen
and this is what I have in the PPR of 2010 in Individual Targets without Incentives (tab Previous Year's Targets):
-Aufrechterhaltung der MA motivation, in dieser Zeit der-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
-Aufrechterhaltung der MA motivation, in dieser Zeit der
there is the error, all the end of the text isn't displayed and the begin of the text is repeated.
I think that this issue is created at the creation of the PPR.
If someone have a idea he is welcom.
thanks and regards

Hi,
Please follow the note:425601,
Go to Tcode: OBA5 change the error messge into warning message. carry out the settlement and roll abck the warning message into the error message after sucessfull settlement.
Reward points if found useful.
Thanks!

Problem with sending text messages replies

After update to OS 3.0 I have problem with sending text messages:
- I CAN send new text message to someone but
- When someone REPLY me, then I CANNOT send next message in conversation
- If I DELETE someone's reply from that conversation text message sends fine.
Anyone have this problem? I have iPhone 3g with OS 3.0 update, previously on 2.x the problem didn't appear. Carrier Orange in Poland

no my girlfriend, was useing my old N75, now she is useing her old phone last night and today. we have been texting with no problems at all. ..so i'm back in the iphone, and we're going to get her a new phone tonight,or she's going to use one of my other back-up phones till we get one for her. called at&t today to see if she could get an early upgrade before oct. just to make me happy with all the BS i've been through (10 hours or more on the phone trying to fix the problem). but at&t came through with their great customer satisfaction!!! NOT!!! so, gonna try and get her a good phone out of contract and see after hers and mine are up might just jump from at&t. very unhappy with them as how they handled this whole thing.

Premiere Elements 13 , Problems with new text/titles

Premiere Elements 13, bisher keine Probleme. Nachdem die Filmlänge etwa 15 Minuten beträgt immer größere Probleme Titel/texte einzugeben. Wartezeiten sind extrem lange oder Programm stürzt ganz ab.

High ATR,
Computer running on Widows 7 ,64 Bit System, Service Pack 1, Processor AMD Phenom(tm) X4 945 3.00 Ghz;RAM 8 GB
Grafikkarte: NVIDIA GeForce 8800 GT
If the video on the timeline is longer than 10 minutes the problem will be remarkable. The response times adding a title is getting longer(2-15 seconds).
As the video is now 18 minutes the response time is after each action(resizing of letters or any changes of the text) up to 30 seconds or the program crashes completely.
Project settings are the following:
General HD 1080i; 29,97frames/second; Video:1920v 1080 H, 30 fps
Video: maximale Bittiefe, Dateiformat i-frame only mpeg, Kompressor MPRG i-Frame, Standbilder optimieren
The video is a mixture of full HD videos 1920x 1080 .mov and pictures up to 4608x3456 pixels.
When the program crashes I remarked that the main memory RAM(8Gb) was fully used by the premiere program. Might there be a problem?
Thank you for your service.
thomasd
Von: A.T. Romano
Gesendet: Sonntag, 1. Februar 2015 23:55
An: Thomas Deschler
Betreff: Premiere Elements 13 , Problems with new text/titles
Premiere Elements 13 , Problems with new text/titles
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <https://forums.adobe.com/message/7151822#7151822>

Problems with recieving texts?

I am having problems with recieving text messsages, today I only had 2 hours that I recieved text messages. This has happened a few times, and when I take my phone to the verizon store they say there is no problem. Has anyone else had this problem?

hoovie,
I'm sorry to learn you are having issues with your text messaging. Just so I know I am up to speed, are you getting messages delivered to your phone on a 2 hour delay or do you have only a 2 hour window where you can receive any messages? Does this happen with only specific persons? Are you having any trouble sending text messages throughout the day?
Please advise more information so I can help further.
Thanks
AdamE_VZW
Follow us on Twitter @VZWSupport

Problems with certain text appearing once exported as HTML on my third party hosting site

Hello,
I am experiencing problems with how certain text is appearing on my website www.pplmedia.com/speakers.
Most of the text is appearing how I want it to once I have exported it out of Muse, but for a reason I can not rectify, certain text is coming out as plain Arial Black text, in a bigger font and the text boxes move slightly. If you go onto the page www.pplmedia.com/jock-wishart you will see what I mean.
I have taken the text out of Muse, put it into the program 'TextEdit', I changed the text from rich to plain, put the text back into Muse and the problem still remains.
I have also published the site as a trial in BC and the text is how it should be, so I assume this is an issue with third party hosting I am using?
If someone can get back to me to offer any help or suggestions that would be greatly appreciated.
Regards
Oliver

You are awesome!!! Thanks so much! I have talked to a ton of people this
week, and no one could figure this out. I read your email to the technical
support person at our 3rd Party Host, and she fixed some files that were not
in the correct spot and changed some of the permissions settings. I am up
and running. Thanks for making my Friday!
Re: Adobe Muse Site will not preview properly on Third Party Hosting
Site...Help!
created by adobelance <http://forums.adobe.com/people/adobelance> in Help
with using Adobe Muse - View the full discussion
<http://forums.adobe.com/message/5227992#5227992>
What's the URL for your uploaded site?
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in the
forum to embed the image at http://forums.adobe.com/message/5227992#5227992
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either reply
to this email or visit the message page:
http://forums.adobe.com/message/5227992#5227992 To unsubscribe from this
thread, please visit the message page at
http://forums.adobe.com/message/5227992#5227992. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Help with using Adobe Muse by email
<mailto:[email protected].ad
obe.com> or at Adobe Community
<http://forums.adobe.com/choose-container!input.jspa?contentType=1&container
Type=14&container=4761> For more information about maintaining your forum
email notifications please go to
http://forums.adobe.com/message/2936746#2936746.

Problem with long text

Hi folks,
iam uploading longtext in transaction KP06 in bdc programing using create_text.
now my problem is if i pass selection criteria
case 1:
Vertion : N0
fiscal year : 2007
planner profile: CCPLAN4
then the budeget plan data uploading successfully along with long text.
case2: Vertion : N1
in this case also everthing wrking fine
case3: Vertion : 001
in this case budgetplan data uploading sucessfully but longtext is not uploading,
i debbug the proragm , create_text also returning sy-subrc = 0. but if i check in KP06 the long text is not there.
data declaration
vertion : VERSN type C(3)
can u tell me the problem is in logic or with FM ?
note : i checked with save_text also.
regards
neeru

HI Naimesh,
the FM Create_text internally contains both FMs save_text and commit_text,
even i debug the FM in case of vertion N1, N0 and 001,
all the cases sy-subrc = 0.
code:
CLEAR G_OBJNR.
LOOP AT RECORD.
COST = RECORD-BDC01.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
 EXPORTING
 input = COST
 IMPORTING
 output = COST.
 CONCATENATE 'KS' p_kokrs record-bdc00 INTO g_objnr.
 SELECT SINGLE * FROM COSP WHERE OBJNR = g_objnr
 AND GJAHR = P_GJAHR
 AND VERSN = p_ver
 AND KSTAR = COST.
IF SY-SUBRC = 0.
 LEDNR = COSP-LEDNR.
 OBJNR = COSP-OBJNR.
 GJAHR = COSP-GJAHR.
 WRTTP = COSP-WRTTP.
 VERSN = COSP-VERSN.
 KSTAR = COSP-KSTAR.
 HRKFT = COSP-HRKFT.
 VRGNG = COSP-VRGNG.
 VBUND = COSP-VBUND.
 PARGB = COSP-PARGB.
 BEKNZ = COSP-BEKNZ.
 TWAER = COSP-TWAER.
CONCATENATE LEDNR OBJNR INTO OBJNR.
CONCATENATE OBJNR GJAHR INTO TNAME1 separated BY SPACE10.
CONCATENATE TNAME1 WRTTP VERSN INTO TNAME2.
CONCATENATE TNAME2 KSTAR INTO TNAME3 separated BY SPACE.
CONCATENATE TNAME3 VRGNG INTO TNAME4 separated BY SPACE4.
CONCATENATE TNAME4 BEKNZ INTO TNAME5 separated BY SPACE10.
CONCATENATE TNAME5 TWAER INTO TNAME.
I_THEAD-TDOBJECT = 'CCSS'.
I_THEAD-TDID = 'COSP'.
I_THEAD-TDNAME = TNAME.
I_THEAD-TDSPRAS = 'E'.
APPEND I_THEAD.
i_tline-tdformat = '*'.
I_TLINE-TDLINE = RECORD-LONGTEXT.
APPEND I_TLINE.
loop at i_thead.
CALL FUNCTION 'CREATE_TEXT'
EXPORTING
 FID = I_THEAD-TDID
 FLANGUAGE = I_THEAD-TDSPRAS
 FNAME = I_THEAD-TDNAME
 FOBJECT = I_THEAD-TDOBJECT
SAVE_DIRECT = 'X'
FFORMAT = '*'
TABLES
 FLINES = i_tline
EXCEPTIONS
NO_INIT = 1
NO_SAVE = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDLOOP.
CLEAR I_TLINE.
REFRESH I_TLINE.
CLEAR I_THEAD.
REFRESH I_THEAD.
SELECT SINGLE * from cokp into itab WHERE OBJNR = g_objnr
 AND GJAHR = P_GJAHR
 AND VERSN = p_ver
 AND KSTAR = COST.
if sy-subrc = 0.
 itab-TXFLG = 'X'.
 append itab.
 write:/ 'Text saved for', record-bdc00 , record-bdc01.
 else.
 write:/ 'Text saved for', record-bdc00 , record-bdc01.
 ENDIF.
ENDIF.
my program wrking fine but the long text is not visible for vertion 001.
regards
niru

Problem with selecting text in a PDF document

I'm having a problem with Acrobat 9 and Reader 9. PDF document that has copying and selecting permissions granted, when I highlight text for copying, some of it gets highlighted and some doesn't. Put the same document on several computers in the office, same issue. It's the document, but I can't figure out what the deal is.
We need to copy large portions of this into a new tech manual.
Can someone help

Without further information, my first reaction is to think that the texts that you cannot copy are included as images.

Problem with Alt Text output from thumbnail image of Lightbox widget

I’m having a problem with the Lightbox widget not producing alternative text based on the image properties. I’ve set ALT text for the image properties on both the larger Ligtbox image as well as the thumbnail. But the HTML output from Muse does not include the ALT text on the thumbnail version of the image. Here’s an example:
 <div class="popup_anchor">
 <div class="Thumb popup_element clearfix" id="u4409">
 <a class="anchor_item grpelem" id="untitled"></a>
 <div class="grpelem" id="u4433">
 <img id="u4433_img" src="/images/n0060292x292.jpg" alt="" width="292" height="292" />
This may be a problem that came in a previous release of Muse. I have a few older examples where ALT text is produced, but it’s no longer updated if I update the Image Properties.

I'm seeing the same problem. Looks like a bug to me. Any ideas as to how we can get this on Adobe's bug fix list?

Problem with making text 3D

Similar Messages

Maybe you are looking for