Problem with manually added field.

Hi,
I added a field to a table with sql studio.
There are problems about that field.
My application does not recognise that field. (wd java app.)
What must i do make field with no problem?
Thanks.

> I added a field to a table with sql studio.
> There are problems about that field.
> My application does not recognise that field. (wd java app.)
> What must i do make field with no problem?
No offense but to stay with your language: You have to tell "your application" that there is a new field.
Since we have no idea how you access the system, where you added that field and what you expect to happen nobody can help you.
Markus

Similar Messages

  • Problem with a Dynpro field (type numc)

    hi everybody.
    I'm developping a ModulPool application in wich i have 2 RadioButtons with 2 textbox fields.
    What i pretend to do is, when the user clicks a radiobutton and strikes Intro, enable the corresponding textbox field and disable the other one.
    My code runs fine, but i have a little problem. When I loop the screen table, to set the appropiate value to the 'input' property, in this case, when i try to disable it (input = '0'), I get a zero character in that field. This field has NUMC type, i'm sure this is the problem
    'cos i've got no problem with the other field (type char). But i can't solve it.
    Anybody's got an idea?
    Thanks

    What you are seeing is the normal behavior of a numeric field represented by the SAPgui.  This is how all numeric fields are displayed via SAPgui.  If you don't want to see the 0,  then you just change the field type to CHAR and handle accordingly.
    Regards,
    Rich Heilman

  • Problem with the quantity field

    hi every one
    i am facing a problem with the quantity field (vbap-kwmeng)
    as per my requirement i need to display this quantity field along with some other item fields from VBAP in an alv grid.
    among all the fields displayed in the alv grid only this quantity field is editable(end user can change this quantity)
    once end user changes this quantity and press save button i need to capture this new quantity in my internaltable.
    problem is input of length of quantity is 15 and the output length is 19
    so when i am pressing save
    say my quantity is 50 when i am pressing save '0.050' is coming because of the length difference
    how can i capture the original changed value.
    vamsi

    what about define two fields in  you inner table ,one as char and the other as vbap-kwmeng, you can show the char one in the ALV gird , when user input value and press SAVE ,you can move the value to vbap-kwmeng.
    you can test it,mybe some one has one better idea.

  • Contract - problem with attachements (empty field in LOIO_OBJID)

    Hi Guys,
    We are using extended classic scenario of SRM 4.0 (SRM Server 500) and our latest support package is SAPKIBKS12. We have the following problem with contracts.
    Sometimes when an attachment is added to a contract the system does not fill the following fields in tabel BBP_PDATT.
    LOIO_CLASS: Normally filled with BBP_L_DOC
    LOIO_OBJID: Normaly filled with a GUID size datastring
    Whenever this happens and later on the contract is changed and released the system will raise an abort. We tried the following notes but no good result.
    891293,919467,932602,964065. Some other notes that might be possible are 1042826/1085700/1083063 but we also don't have good experience with these ones.
    Can anyone give us advice about two things.
    1) Is there a way to fill the empty fields in BBP_PDATT so that existing contract will work properly again?
    2) Does anyone know why this problem occurs and how to fix it for new contracts?
    Hope to hear from you,
    Arie

    Thankyou for the reply. I have made following changes but still not working. I am creating the inquiry and customer material is not getting populated. Please guide in resolving the issue.
    DATA : W_ENQUIRY_ITEM_INX LIKE BAPISDITMX OCCURS 0 WITH HEADER LINE.
    W_ENQUIRY_ITEM_INX-ITM_NUMBER  = THEAD-ITEMNO.
          W_ENQUIRY_ITEM_INX-UPDATEFLAG  = 'X'.
          W_ENQUIRY_ITEM_INX-CUST_MAT22 = 'X'.
    APPEND W_ENQUIRY_ITEM_INX.
    CALL FUNCTION 'BAPI_INQUIRY_CREATEFROMDATA2'
       EXPORTING
       SALESDOCUMENTIN               =
         INQUIRY_HEADER_IN             =  W_ENQUIRY_THEAD
      IMPORTING
        SALESDOCUMENT                 = W_NUMBER
       TABLES
        RETURN                        = W_RETURN
        INQUIRY_ITEMS_IN              =  W_ENQUIRY_ITEM
        INQUIRY_ITEMS_INX             =  W_ENQUIRY_ITEM_INX
         INQUIRY_PARTNERS              = T_INQUIRY_PARTNERS

  • Problem with Update Text fields in Infoset

    Hi experts,
    Here i would like to rephrase the question. Normaly while working with Infosets, when press "update text fields" button, those fields having text is updated. But one of my field is not updated. I need some help from you for that.
    One more question i've that my field is having check table so i would like to know how exactly the text field is updated.
    scenario.
    Customized IT9320 has field prt_pos added. This field is having check table T528B. But i want text field to be attached is IT1000-STEXT.
    How this can be done, because i suspect that just using check table field IT1000-STEXT is not attached to IT9320-prt_pos.
    Please help. I'm really got stuck here.
    Thanks a lot,
    Toral.
    Hi,
    I'm working on customised Infotype. I need to add one new customised field ie Present Position. This field has number as well as text associated with it. There is a check table attached with this field so that text can be displayed alongwith number.
    I need this field in SAP/Adhoc query. But when i go to SQ02 this fields shows only value. Text is disabled for this field. I'm not sure why is it so.
    I looked into other infotype which as one field using same data element, and that field shows both value as well as text. Please help me to rectify this issue for present position field.
    Thanks,
    Toral.
    Edited by: Toral Sheth on Jul 4, 2008 2:01 PM

    You would be much better off with one multi-line form field.
    There are many problems with trying to determine when one is at the end of the display field with text entry.

  • Is anyone else having problems with Apertures Date fields?

    After experiencing a sysems failure I began restoring my images from backups.  I have had no end of problems with Image dates.  I have come to the determination that Aperture is NOT using either the "Create Date" or "DateTimeOriginal" as the image "Date" or "Date Created" data if other fields have other dates.
    Here is a clip from my image metadata using exiftool:
    File Modification Date/Time     : 2012:09:23 19:53:15-04:00
    File Access Date/Time           : 2013:01:16 11:34:38-05:00
    File Inode Change Date/Time     : 2013:01:16 11:31:32-05:00
    Create Date                          : 2006:02:20 11:51:12.10
    Date/Time Original              : 2006:02:20 16:51:12.10
    Modify Date                          : 2006:02:20 11:51:12.10
    And here is what Aperture utilized on import
    Date:                               9/23/12 7:53:15 PM EDT
    Date Created                         9/23/2012 7:53:15 PM
    So Aperture utlized the File Modification Date/Time as the Create Date despite that the fact that the Create Date field is present and is properly formatted in the original image.
    According to the Aperture mapping table, this shouldn't be happening.
    Now, before someone recommends that I use Aperture's Date Adjust utility - I'm talking about  slightly over 30,000 images.  Editing images one at a time, or in blocks when you don't know what field Aperture is using as the Create Date would require individual inspection of each image followed by manual adjustment of each image.  That approach isn't acceptable.

    Hmm ok, let me restate the issue then, I thought I was clear.  I could have pointed out in my original post however, that only the EXIF and IPTC date fields were displayed from the metadata dump.
    The data set presented in my first post is the EXIF dataset from the file which clearly shows the image was captured by digital camera at
    Create Date                          : 2006:02:20 11:51:12.10
    Date/Time Original              : 2006:02:20 16:51:12.10
    (The delta of 5 hours is the result of Zulu versus local time offset)
    But, when I ingested it into Aperture, the import routine utilized the IPTC field
    File Modification Date/Time     : 2012:09:23 19:53:15-04:00
    which is updated by the OS whenever you move the file around outside of Aperture. (a number of image data fields are updated by the OS - filename for example is another.).  This resulted in the image date fields being stamped in Aperture as:
    Date:                               9/23/12 7:53:15 PM EDT
    Date Created                         9/23/2012 7:53:15 PM
    Which obviously came form the File Modification Date/Time field and not (either) the Create Date or Date/Time Original fields.

  • Problems with manually renaming files in List Mode

    I have an iMac 24" 2.4 Ghz with 4 Gb of RAM. Sometimes when I try to rename a file in a folder in List mode, I get unexpected and strange behavior. It is intermittent. It might be that I cannot get the highlighted current name to unhighlight (in cases where I only want to change a portion of the name), or the filename box might disappear, or the folder seems to lockup, or I get blocks every other space instead of letters. Weird, strange results. I do know that I can minimize the problem, if when first entering the filename box (by hitting 'return') I move the cursor via the cursor keys to the right over the extension and then back to the left. When I do that, it seems like I have less problems.
    All I can say is that it doesn't seem to be a robust as what I was used to in the Windows world. I'm new to Mac and this is the only complaint I have. I'm ecstatic about my Mac and can't believe I waited this long to convert over to it. If I could get this little glitch fixed, I'll be a 'happy camper'! (the problem's certainly not enough to make me go back to the misery I was in with Microsoft.)
    Has anyone else experienced any problems such as this? Or, is there a possibility that there is something wrong with my Mac?
    Or, am I doing something wrong?
    Thanks for any kind help I receive.
    Matt

    Finder for Intel is the same as Finder for PPC. Its the same code, sans some endian conversions.
    As for the renaming problem. Two things come to mind. In Tiger if you selected a file and pressed return, no matter what view style you were in, it would bring up the edit field and the entire name would be highlighted. In Leopard, this was changed slightly where it will now highlight everything up to the file extension. So if you have a file called 'foo.txt', it will highlight just 'foo'. This is a nice feature IMO because more often then not I don't want to change the file extension, only the 'body' of the file name.
    The Edit box disappearing is a bug that has been around for a couple OS releases where if something causes the view to update (more specifically the HIDataBrowser control List View is made of) while your renaming something, it will cancel the rename session. This can be caused by a bunch of things, like the size of a file changing or mod date changing or file being added to the directory etc. It has been around for a while, but has only become more prominant due to the addition of Icon Thumbnails in Leopard. When the thumbnail is created for the file by the Finder, List View updates to show the new thumbnail which cancels the edit session. There are a couple workarounds for this:
    1) Switch to Icon or Column View
    2) Wait for all the thumbnails to be created before starting to edit file names. Thumbnails appear pretty quickly, and only for the files that are currently visible in the window, so you shouldn't have to wait very long, and it only happens the first time you view that folder.
    3) Press Command-J while in List View and uncheck "Show Icon Previews" and then click the "Use as Defaults" button. That will turn off the icon thumbnails for all windows in List View.
    I haven't seen a problem with "blocks showing up every other space" though. I assume you mean a solid black square, right? Sounds like an invalid character in the file name. Renaming the file to something else should cure that one.
    Message was edited by: petrock

  • Airport Express B/G : problems with manual IP configuration?

    I don't know when it started, but I think it has something to do with one of te latest systemupdates or airport firmware updates.
    Configuration :
    - Airport Express N : only N, bridge mode, IP manual (192.168.1.7), roaming with Extreme N
    - Airport Extreme N : only N, bridge mode, IP manual (192.168.1.35), roaming with Express N
    - Airport Express B/G (older one) : B/G compatible, bridge mode, IP manual (192.168.1.8), no roaming, just stand alone.
    All the airports are wired connected to a 10/100 switch.
    No internet configuration on these airports, I'm using a separated router, also connected to the switch.
    Problem : The airport Express B/G dissapears from the network : from time to time not visible in the airport utility program, from time to time not visible in iTunes (airtunes). In spite of these problems, he is always visible in the airport network menu. An IP ping works just fine.
    When I change the IP configuration of the Airport Extreme B/G from manual to DHCP, there is NO problem anymore.
    No problems with the Airport Express N an Airport Extreme N.
    Are there other users with the same problem?
    Thanks in advance.
    Message was edited by: Mario Willen

    question: i below what should i do ?
    1) put a cable from my cablemodem to the airport extreme bs;
    2) put a cable the airport extreme bs to the airport express bs.
    Yes on both. Your network configuration would look something like the following:
    Modem > (Ethernet) > \[WAN port] AEBSn \[LAN port] > (Ethernet) > AX
    do i have to reset the modems and are there any setting i should be aware of ?
    Yes, it's always a good idea to both reset both base stations and, after doing so and before configuring them, perform a complete power recycle of your network equipment.
    So in this case ...
    o Power-down the modem, AEBSn, AX, & computers. (Order is not critical.)
    o Reset both the AEBSn & AX. (Again, order is not critical.)
    o Power-down each base station after performing a successful reset.
    o Power-up the modem; wait at least 15 minutes.
    o Power-up the AEBSn; wait at least 10 minutes.
    o Plug-in the AX; wait at least 5 minutes.
    o Power-up your computer(s).
    o Use the AirPort Utility to reconfigure both base stations as required.

  • Has anyone else had a problem with Verizon adding the free 1gb of data when you you orderd your iphone 6?

    So on the order, it clearly states that I would receive an extra 1 GB of data for two years when I bought the new iPhone.  I actually added two iPhone 6's to my account.  And each order stated the promotional data.  It did not automatically add when I activated the two new phones.  I have made 4-5 phone calls to customer service and I now have .488 GB of promotional data on my account.  I should have 2 GB...
    Anyone else have this issue and how did you get it resolved?

    I was running into the same problem with my Mac.  I could not open nor find an application that would open a .spdoc file extension.  However, I went to my iPad and was able to open the file using the Scanner Pro app.  I hope this helps.

  • Problem with non currency field calculations to become curr

    Hi guys,
    Is there a problem if I have a QUAN field and DEC field forming to become a CURR field? I mean a have this computation below:
    v_var1 = v_var2 * v_var3.
    where v_var1 type QUAN, v_var2 type DEC and v_var3 type CURR...
    would it incur any problem with the calculations?
    Thanks!

    Hi,
    Did you try ?
    Worked for me flawlessly
    tables bseg.
    parameters : qty like bseg-menge,
                       amt like bseg-dmbtr.
    data : result like bseg-dmbtr.
    result = qty * amt.
                write result.
    The only issue is that the result will be rounded upto 2 decimals.
    But if you declare result as
    data : result(13) type p decimals 3.
    Then there will be no issues.
    regards,
    Advait
    Edited by: Advait Gode on Oct 3, 2008 3:59 PM

  • Problems with the 'Comments' field in iTunes

    First, sorry for my english (I'm danish).
    I've read a lot of threads here and everywhere else, but can't find a solution for my exact problem. I use Windows Vista and the newest version of iTunes.
    Most of my mp3 songs (35.000) are put directly in album folders to the folder 'D:My Music from another computer via a USB drive and the songs already have id3 tag information on them.
    I then add the albums to iTunes and most of my tag information is now updated in iTunes. Names, Artists, Genre, Year, everything is okay. By the way the songs have ID3v2.3 tag information. I see that in my Mp3tag v.2.42 application.
    But the problem is with the 'Comments' field:
    Those tags (originally put to the songs directly in the proberties of the song in Windows Explorer) will simply not transfer to iTunes 'Comments' field. And if I write something in the iTunes 'Comments' field this will not show up in the fields properties in windows Explorer. It looks like the 'Comments' fields in iTunes and in the proberties in the song are not connected at all!?
    I then found out, I could let iTunes convert the ID3 codes, but nothing happens except from when using v. 1.0 or 1.1, because then the comments tag are transferres, but unfortunately all the tags will only show 30 characters!!!
    And there's also a different story:
    A few albums though are put directly on my computer by using iTunes to import the CD. These songs have ID3 v.2.2 tags, so I guess iTunes import files in that format?
    And here it's a little different story. If I put comment data directly to the file proberties in Windows Explorer (after the CD's been imported to iTunes), the comments will show up in iTunes, but only as several 0 and 1 digits! On the other hand, if I put information directly in iTunes 'Comments' field it wil show up correctly in the file proberties! But it's only a few songs/albums that are handled that way.
    Well, bottom's line, I want to see my comments tags (which are allready there in the song's proberties) when I browse my music in my folders in Windows Explorer and I want to see the exact same comments if I go to browse my music in iTunes. That should not be a problem ... but it is not ...
    Can I please get a solution or at least an explanation, and hopefully in not too tecnical terms.

    I, too, hope someone will answer this! I am hoping to catalog my entire CD collection in iTunes and I want to include the storage box number somehow, thinking that "comments" would be a good place to do so. If I cannot do that I'll try to find a program other than iTumes to do it. Does anyone have any suggestions on this topic? ...perhaps I need to open a new thread?
    THANKS!
    Doug

  • Problem with long text field.

    Hi all,
    I have a problem when I try to concatenate two fields.
    It seems the new field only is 254 characters long?
    Here is my syntax:
    data: w_long_text(1000).
    clear w_long_text.
        loop at iline.
          concatenate w_long_text iline-tdline into w_long_text separated by space.
        endloop.
    I'm sure the text is longer then 254 becuase I can see the text in an Activity in the Sap Crm system.
    Best Regards
    Frode

    Hi thomas
    wat i would suggest you is better take an internal table with long_text(255) field .
    data : begin of it_text occurs 0,
                long_text(255),
              end of it_text.
    clear : w_long_text,it_text.
    loop at iline.
    concatenate w_long_text iline-tdline into w_long_text separated by space.
    <b>it_text-long_text = iline-tdline.</b>
    append it_text.
    clear it_text.
    endloop.
    and when displaying the text keep that in a loop and print it.
    This way u can display the whole text irrespective of the char length.
    Reward points if helpful
    Regards
    Zarina

  • Problem with select max(FIELD)

    I have a table with the following fields:
    PARTID     ART_TYP     AEC     SERVICE     PLANT     STATUS
    4711     A     A     2     P     230
    4711     A     B     0     P     230
    4712     A     B     2     P     230
    4713     A     B     0     P     230
    I need a sqlscript where I get the records with MAX(SERVICE)
    In this example
    4711     A     A     2     P     230
    4712     A     B     2     P     230
    4713     A     B     0     P     230
    I tried this with:
    select distinct partid,
         art_typ,
         aec,
         max(service),
         plant,
         status
    from t_msltmp
    group by partid,art_typ,aec,plant,status
    But I get both records of partid=4711
    Can someone help me with this problem
    kind regards
    Menk Slot

    ROW_NUMBER() requires explicit ORDER BY clause in OVER:
    http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96540/functions105a.htm#86312
    SQL> select partid, art_typ, aec, mx, plant, status
      2  from(select partid,
      3                art_typ,
      4                aec,
      5                max(service) over (partition by partid) mx,
      6                row_number() over (partition by partid order by service desc) rn
      7                plant,
      8                status
      9         from t_t)
    10  where rn = 1
    11  /
        PARTID A A         MX P     STATUS
          4711 A A          2 P        230
          4712 A B          2 P        230
          4713 A B          0 P        230Rgds.
    P.S.
    Another way to get this (more tedoius):
    SQL> select partid,
      2  max(art_typ) keep (dense_rank first order by service desc) art_typ,
      3  max(aec) keep (dense_rank first order by service desc) aec,
      4  max(service) service,
      5  max(plant) keep (dense_rank first order by service desc) plant,
      6  max(status) keep (dense_rank first order by service desc) status
      7  from t_t
      8  group by partid
      9  /
        PARTID A A    SERVICE P     STATUS
          4711 A A          2 P        230
          4712 A B          2 P        230
          4713 A B          0 P        230Message was edited by:
    dnikiforov

  • Problem with SAPbouiCOM.EditText field

    Hey Everyone,
    I am experiencing a problem with an edit text box on a form that I created. For some reason when I go into the add mode on the form and type into the field the text disappears as soon as I go to another one of the controls on the form.
    If i leave the cursor in that text box the text stays. Has anyone experienced this problem before?
    Thanks in advance.

    Laura,
    I had this problem and the reason was about the datasource.
    If you item is linked to a UserDataSource, there is no problem.
    If you item is linked to a dbdatasource, you have to ensure the datasource contains at least one record.
    Can you show us the part of xml file, or VB code that you use to create your item on you form.
    the event that you can catch would be et_validate. But I think it's fired when your text box is linked to datasource
    HTH
    Sebastien

  • Problem with multiple 'selectOneMenu' fields

    I have a JSF web page with 2 selectOneMenu fields. The first field is populated as the page loads,
    the second field is populated from the value selected in the first field. The second field value is
    associated to a variable in the backing bean which is used for further processing when the
    command button is pressed.
    on pressing the command button the following error message appears :
    jsf E com.sun.faces.context.FacesContextImpl addMessage Adding Message[sourceId=form1:menu2,summary=Validation Error: Value is not valid)
    Below is my JSF page and backing bean. Any help would be appreciated
    <h:form styleClass="form" id="form1">
         <BR>
         <h:selectOneMenu styleClass="selectOneMenu" id="menu1" valueChangeListener="#{empDetailsBackingBean.EmpSelectDetails}" onchange="submit()">
         <f:selectItems value="#{empDetailsBackingBean.selectItems}"/>
         </h:selectOneMenu>
         <BR>
         <h:selectOneMenu styleClass="selectOneMenu" id="menu2" value="#{empDetailsBackingBean.keyDetails}">
         <f:selectItems value="#{empDetailsBackingBean.selectItems1}"/>
         </h:selectOneMenu>
         <BR>
         <hx:commandExButton type="submit" value="Submit" styleClass="commandExButton" id="button1" action="#{empDetailsBackingBean.EmpDetails}">
         </hx:commandExButton>
    </h:form>
    public class EmpDetailsBackingBean
         private String c12 = "";
         private String c4 = "";
         private String empNo = "";
         private String title = "";
         private String name = "";
         private String add1 = "";
         private String add2 = "";
         private String add3 = "";
         private String postCode = "";
         private String keyDetails = "";
         private List selectItems;
         private List selectItems1;
         private HoldDetails details;
         public EmpDetailsBackingBean()
              C4Utility util = new C4Utility();
              selectItems = util.getDetails();
              EmployeeUtility util1 = new EmployeeUtility();
              selectItems1 = util1.getDetails("", "Y");
         public void EmpSelectDetails(ValueChangeEvent vce)
              c4 = (String) vce.getNewValue();
              EmployeeUtility util = new EmployeeUtility();
              selectItems1 = util.getDetails(c4, "Y");
         public String EmpDetails()
              c12 = keyDetails.substring(0,6);
              empNo = keyDetails.substring(6,12);
              EmpDetails util = new EmpDetails();
              details = util.getEmpVals(c12, empNo);
              c12= details.getC12();
              empNo = details.getEmpNo();
              title = details.getTitle();
              name = details.getName();
              add1 = details.getAdd1();
              add2 = details.getAdd2();
              add3 = details.getAdd3();
              postCode = details.getPostCode();
              return"";
         public String getAdd1()
              return add1;
         public void setAdd1(String add1)
              this.add1 = add1;
         public String getAdd2()
              return add2;
         public void setAdd2(String add2)
              this.add2 = add2;
         public String getAdd3() {
              return add3;
         public void setAdd3(String add3)
              this.add3 = add3;
         public String getC12()
              return c12;
         public void setC12(String c12)
              this.c12 = c12;
         public String getEmpNo()
              return empNo;
         public void setEmpNo(String empNo)
              this.empNo = empNo;
         public String getName()
              return name;
         public void setName(String name)
              this.name = name;
         public String getPostCode()
              return postCode;
         public void setPostCode(String postCode)
              this.postCode = postCode;
         public String getTitle()
              return title;
         public void setTitle(String title)
              this.title = title;
         public HoldDetails getDetails() {
              return details;
         public void setDetails(HoldDetails details) {
              this.details = details;
         public String getKeyDetails() {
              return keyDetails;
         public void setKeyDetails(String keyDetails) {
              this.keyDetails = keyDetails;
         public List getSelectItems() {
              return selectItems;
         public void setSelectItems(List selectItems) {
              this.selectItems = selectItems;
         public List getSelectItems1() {
              return selectItems1;
         public void setSelectItems1(List selectItems1) {
              this.selectItems1 = selectItems1;
         public String getC4() {
              return c4;
         public void setC4(String c4) {
              this.c4 = c4;
    }

    I haven't taken the time to read your code, but the error message "Value is not valid" mostly means that the value of f:selectItems is dirty.
    If you understand generics, this one clearly explains the usage of h:selectOneMenu:
    JSF<h:selectOneMenu value="#{myBean.selectedItem}">
        <f:selectItems value="#{myBean.selectItems}" />
    </h:selectOneMenu>MyBeanprivate T selectedItem;
    private List < SelectItem < T, String > > selectItems;
    // + getters + setters
    // T is the Object you want to select. String is the label for the menu.
    // think away the spaces surrounding < and >, the parser of this forum is a bit crappy ;)

Maybe you are looking for