Problem with Map Loader 3.0.28.0 and 5800XM

Hi all, i have a problem with maps upload to my mobile, whenever i start Map Loader i see a message: You have connected at least one phone (Soft) without a Maps drive. Either you are using an old Map version - .. - or have never started your Maps application... I use USB PC-Suite mode, I have had run Maps application on my phone before i try to connect Map Loader, the Maps version installed on the phone is v3.03 10wk01 b05 - so that's obviously not a reason!! Now i can't install new maps anymore - i just can click this error window away and choose some maps, they would be downloaded from the Internet, but they would not appear on my mobile! With a previous version of the map loader (don't know the version number any more, and previous maps version on the phone, i have no problem) I also need a link to Maps Updater due the Nokia site malfunction - couldn't find this software anymore.... sorry my poor english :-)
Nokia users - the biggest beta test community of the world!

Problem solved! The STUPID software searchs for ALL mass storage devices attached to your computer, so I got error messages all the time until I unplug my USB Hard drive.
Thank you Nokia guys, your were great help by solving this problem .....
By the way, the STUPID software doesn't shows the maps that would be all ready installed on the phone, and you couldn't say that the upload of the maps was really successful until you waisting your time watching the progress bar to the end.
I wouldn't be suprise if you can install the same map twice so it takes the twice space....
regards, and sorry for my poor english
Nokia users - the biggest beta test community of the world!

Similar Messages

Problems with Maps 2.0, favorites look-up and adre...

I have the latest version of Nokia Maps (v2.0 wk26 b02) installed on my N82 some days ago. But now i have problems with adress search. I often notice that adresses that i try to search for, returns no results. This problem appears even if i can see the see the adress on the map, and even if i am connected to a network.
And if i sometimes find an adress, and try to the function "show location on map", nothing happens...
This also apply to some of the favorites that i saved earlier. For instance i have saved several places where my family live, but only one of two them can is now working as they did before. When i try the same function "show location on map", nothing happens...
I even try to save new locations but the problem is still there. When i try to show the locations on map nothing happens.
Is it only me that have this problem? Is there anyone that have an solution to this problem, or is it a bug that comes with the latest version og Nokia Maps?
Solved!
Go to Solution.

Hi again.
After a long time with trying and failing with solving this problem, and installed the latest maps 2.0 application all over again, and even installing the 1.0 application nothing helped.
I even updated the firmware on the phone, but nothing helped. Nothing helped at all.
But suddenly, with all these mapsproblems something else happened to. You know the multimediabutton on the front, (the one that is a little higher than the others) suddenly wouldn't work at all. If i pushed it the dislplay only "blinked" for a second, and then returned to the normal display again.
So to solve all problems i decided to use the *#7370# function to reset the phone completely (after i backed up my data of course). Suddenly everything is working again.
After this i upgraded to the maps 2.0 latest, and installed all my applicatons again. I can now search adresses again and see them on the map, i can save favourites and view them on the map....
And now my multimediabutton is back to normal again aswell.
So the problem is now solved :-)

I am having problems with down loading items on Adobe Reader and have been told that I need to update my Adobe Reader. I have tried this but I am being told that I need to temporarily disable Firefox to do this?

How do I disable Firefox to download Adobe Reader

There may be a problem with the cookies that stores the "remember me" details. Try deleting cookies for live.com (including account.live.com and login.live.com cookies), for details on doing that see the [[Deleting cookies]] article.

Problem with maps on e72

Hi everyone
I've got a problem with maps on my E72.
I've seen advert that Nokia is going to let everyone use maps for free on selected models.
I was going to buy Sat Nav for whole Europe as I travel a lot and I was going to change my old N95. I thought I could do both in one new phone. Checked all the available models and chose E72. It said it;s got GPS and you don't need to use your network and spend fortune on internet connection. Got it from eBay for £270.
I installed Ovi Maps from internet and the first thing that surprised me was it had 'only' 7-8MB.
I thought that something was wrong, maps for 72 countries couldn't be 8MB big.
After some time I managed to set my e72 up. Put my Maps on and...
It takes loads of time to find GPS connection, but the worst thing is if I type lets say Paris it doesn't find anything. Map has wholes, like suddenly the roads end and there's nothing there.
My question is what am I doing wrong? Do I need to download something more? I didn't have any maps on my phone when I bought it. Where can I find them?
If someone could help I'd appreciate it.
Thanks a lot.

I forgot to mention that when I choose a destination it keeps saying Calculating route all the time. I waited about 15 minutesand it didn't calculate anything.

Problem with maps in Mavericks on iMac

I have a problem with my Maps on Mavericks.
I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
As you can see, it just stays blank all the time.
I'm also running Parallels 9 and don't know if that has something to do with problem.

Spent days trying various fixes, but this is the one that did it for me. Thanks!
livetowin
Re: Problem with maps in Mavericks on iMac
Dec 8, 2013 7:14 PM (in response to robin1943)
Try this
Since my date and time were incorrect and imessage was not working as well, I tried this
1. Go to system preferences and click date and time
2. Select date and time tab
3. Uncheck "set date and time automatically" and manually enter the correct time
4. Go to time zone tab and uncheck the box there too
5. Go back to date and time tab and now check the box "set date and time automatically"
6. Then check the box in time zone as well
Now open maps and see if it works!

Problem with Application Loader

Hi,
I'm trying to submit an iPhone application to iTunes using the Application Loader on a Mac Mini (OSX 10.5.8). After I enter my iTunes Connect login details I receive the following error response
*There is a problem with you login information*
Please click back and try again
An error occurred talking to the iTunes Store
The login details are correct, the device connects to the itunesconnect web site from Safari without issue.
Is anybody else experiencing a similar issue? Anybody have any ideas on how I might resolve this issue. It's really frustrating as this is now the only way to get an App into iTunes and the error message is not exactly giving me a lot to go on.

I got a message in an email saying I had the wrong binary code and therefore had to change it by downloading the application manager.
This was the email they sent me?
Some potential reasons that your binary is invalid: the binary icon doesn't meet our requirements, the payload directory is set at the wrong level in the .app wrapper, the bundle version has not been increased, and so on.
You will receive an email detailing the reason for your invalid binary. To clear the error, log in to iTunes Connect, locate your app, and click Ready to Upload Binary to reset your app's status to Waiting For Upload. This will allow you to redeliver your corrected binary through Application Loader.
Makes no sense to me either!

Problems with mapping after bundling messages into one XML-file

Hi all,
Case 1: one DebMas IDoc ==> XI ==> one XML-file : no problems with mapping.
Case 2: several DebMas IDoc's ==> XI ==> one XML-file : problems with mapping.
Explanation:
Incoming DebMas IDoc's:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 3 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 4 : Customer Master Partner Functions (E1KNVPM).
After bundling into one XML-file:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : no Customer Master Partner Functions (E1KNVPM) !!!!
Businesspartner 3 : Customer Master Partner Functions of Bp 2 (E1KNVPM) !!!!.
Businesspartner 4 : Customer Master Partner Functions of Bp 3 (E1KNVPM) !!!!.
All the payloads of the IDoc's are correct.
In the message mapping we use a Container for the Partner Functions (shown as below)
Is this a serious bug in the mapping of SAP XI ?
Does anyone knows how to solve this serious problem.
E1KNVVM -
> Partner_Container
E1KNVPM -
> Partner
PARVW -
> ParnerRole
KUNN2 -
> PartnerNumber
Regards,
Theo Pijlman

Hi,
Example:
Input idoc has field F1 with occurence 0..unbnd
My input values for field F1 is
1
none
2
3
Say, I have a mapping, F1---->TargetF1
In the target only 3 TargetF1s will be created for the values 1,2,3 and nothing will be created for the field F1 with no value.
To overcome this, use collapse contexts.
F1->collapsecontexts>TargetF1
This way, the TargetF1 fields created will have the following values:
1
blank
2
3
Collapse contexts makes sure that a target is created, even if there is a context change specified at the source.
Hope this is clear.
Regards,
Smitha.

Problems with Safari Loading Sites and Photos

For the past week (Feb. 2015) I've experience problems with Safari loading websites on my 2009 20" iMac desktop. Running version OSX Lion 10.7.3 4 GB. Intel Duo Core 2.66 GHz
Mac also will frequently not upload photos at websites like Yahoo News or Facebook. It does this throughout the day.
So, I downloaded Chrome, thinking it would be a better browser if Safari is not functioning. Chrome is just slightly better, and when it won't load a website I get the following error message from Chrome: DNS_PROBE_FINISHED_NO_INTERNET.
I'm debating taking the Mac to the Apple store for diagnosis or repair today, but if anyone else is experiencing similar problems, could you please offer some solutions as to what is going on.
Thank you.
AngieRK

Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load - Apple Support
Unless you have a good reason not to, you should update the OS to version 10.7.5.

Problem with delta load urgent!!

Hi,
I have a problem with delta load
We have an IP, which loads data from R/3 system daily, its a delta load to the ODS and it updates to the cube with the selection on Company Codes and 0FISCPER
we are in 3.5 system
For a couple of company codes A & B, the init was done for the period 07.2010 to 12.2099 and after tht the deltas are loaded from 07.2010 till 12.2099 and there's no pblm with tht
Now, there was some updation in R/3 system and the data was maintained for the company codes in A& B for the FISCPER 001.2010 to 006.2010, for which init wasnt maintained...
now how shall we need to load the init in this case? dnt ask me how the postings was done in R/3, but my pblm is purely related to the loading data in BW from R/3, as its very imp for the customer to see the data from 01.2010 to 12.2010 in reports, but the data was only available in reports from 07.2010 onwards
do i need to create another IP and maintain the init for 01.2010 to 06.2010? so tht this selection will automatically appear in the ODS delta loading infopackage
pls throw ur inputs ASAP
thank you

Hi Prince,
No need to maintain any Init for this data, It will be enough if you can load the data from jan 2010 to jun 2010 into your Info Cube.
Follow the below steps:
1)create full load IP for this data source.
2) give the selection as A and B company codes and 0FISCPER as 001.2010 to 006.2010
3) in menu bar, click on scheduler --> select full repair request
4) In the next screen check the check box and save
5) Now execute the IP, it will the data with out disturbing your daily delta.
follow the same procedure to load data till to your Info Cube.
Please revert if you have any questions
Regards,
Venkatesh

Problem with mapping the Entity beans onto database tables

Hi,
I got a problem with mapping the Entity beans onto database tables. Here are what I did:
First Step:
asant capture-schema
Second Step:
capture-schema -driver com.pointbase.jdbc.jdbcUniversalDriver -dburl jdbc:pointbase:server://localhost/sun-appserv-samples -username pbPublic -password pbpublic -table APPLICANT -table APPLICANTSKILL -table CUSTOMER -table LOCATION -table job -table JOBSKILL -table SKILL -out build/agency.dbschema
The first step was fine. But, in the second step, I got the error message as follow:
using dburl:jdbc:pointbase:server://localhost/sun-appserv-samples
using username:pbPublic
using password:pbpublic
using driver:com.pointbase.jdbc.jdbcUniversalDriver
using schemaname:null
using output file:build/agency.dbschema
JDO71100: Failed to find a class. Verify that the class is available on your CLASSPATH
java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at com.sun.forte4j.modules.dbmodel.jdbcimpl.ConnectionProvider.<init>(Co
nnectionProvider.java:38)
at com.sun.jdo.api.persistence.mapping.ejb.CaptureSchema.main(CaptureSch
ema.java:130)
at com.sun.jdo.spi.persistence.support.ejb.util.CaptureSchemaWrapper.mai
n(CaptureSchemaWrapper.java:29)
Thanks for your help!

You need to add the pbclient.jar or some similar name like that, in the CalssPath.

Problems with the load of Deliveries

Hi experts,
I am having some problems with the load of Deliveries from R/3 into BW.
In LIPS table of R/3, there are 41412 records. I delete the setup tables and realize the extraction with the transaction OLI8BW. After that I launch a simulation with RSA3 but only 6765 records are taken into account.
Apart of that, there is a range of deliveries documents (between 180000000 and 1084000000) that is not be taken into account.
Has someone have similar problems with the load of deliveries?
Thanks.

Matute,
you can try comparing those missing records with those already extracted. I found in my side that some records with document category of "H"(Returns) don't be extracted by 2lis_12_vcitm.
Jin Ming

I have I.O.S. 6.0.1 and i live in Georgia, Tbilisi. I have got the problem with maps. It does not get directions. Per exemple it was working in italy but in my cuntry it does not work. Could u explain me what can i do to make my maps work in Georgia?

I have I.O.S. 6.0.1 and i live in Georgia, Tbilisi. I have got the problem with maps. It does not get directions. Per exemple it was working in italy but in my cuntry it does not work. Could u explain me what can i do to make my maps work in Georgia?
Thank u

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Problems with pages loading

We are having a lot of problems with pages loading slowly or not at all. We get this message all the time...server not found...even on pages that have just recently been visited. We have this problem with Safari, Firefox, and Camino. I don't have Internet Explorer installed, but why should I just keep adding new browsers. My ISP assures me that the connection is fine. I have emptied caches, cookies, whatever I can find to empty. Did I empty too much? We use a Netgear router and a company called Digitron. Any suggestions?
Message was edited by: cynder13

Hi
Perhaps the easiest way to sort this out is to set up a separate Network Location for your connection:
-Location - set up a personal location by clicking on the drop down menu and selecting "add a location". Use a name familiar to you. Once established, select "apply".
-Next, click on the "Show" drop down menu and select Network Port Configurations. Only Airport ought to be checked. Move it to the top of the list (you can drag it). Select "apply".
-Back to the "Show" menu, select "Airport". Click on the TCP panel. There, enter 4.2.2.2 and 4.2.2.1 (separate lines) in the DNS servers box and select "apply". Also, you can always call your Internet Provider to find out if they have specific codes.
Creating a personal location, plus adding the DNS codes seems to speed things up. Otherwise, the "automatic" function has a tendency to "search" for available locations, hence creating the lag you are seeing.
Lastly, in the Finder, go to your Applications>Utilities folder and select "Terminal". Once the screen is open copy/paste lookupd -flushcache and press return. This clears out the DNS cache. Once done, quit Terminal.
If the above doesn't help, I suspect the Router is the problem. Perhaps you need to upgrade its firmware. Check at the Netgear site>Support.
Post back

Problem with Essbase add-in 9.2.1 and office 2010.

Hi all,
we have a problem with Essbase add in 9.2.1 and office 2010.
Every time when a user opens Excel a new (additionally) euntry in the ad-on menue appears.
Indeed what happens is, that the add-in is loaded n-times.
At the first start of excel one time, second two times and so on...
Thtas's very annoying.
Can someone confirm this issue or even better know a workaround.
(A way we have found so far to ease the pain a bit -well only temporary- is to disable the ad-in, close Excel and start it again.
However with every new start of execel the issues begins again.
But that's not a solution you can recommand to the end user.)
Any help is welcome.
Thank you in advance!
Andre

Have a read of the following on Oracle Support - Support for Office 2010 in Essbase Excel Add-In and Smart View [ID 1191235.1]
Cheers
John
http://john-goodwin.blogspot.com/

Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
i set the printer to correct icc profile
print out comes out same with glazed colors and missing tones/colors
however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
can you please assist and thanks

I've a Pro9000 and also use Colormunki successfully.
When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

Problem with Map Loader 3.0.28.0 and 5800XM

Similar Messages

Maybe you are looking for