Problem with Mapping exectution and the display Queue

Hi All,
I am getting the following error while testing any newly designed mapping.
Source code has syntax error: java.lang.NoClassDefFoundError: com/sun/tools/javac/Main Exception in thread "main"
But all previously designed(activated) mappings are executing successfully.
Can you please anybody calrify this problem??
Thanks,
sekhar

If you are using UDF in your message mapping then please do check it first before
testing the whole mapping
you can check UDF by :
source_field -
UDF-----target_filed
right click on the UDF node in the maaping Editor and slecet queue, it will check the your UDF code and if has error it will show you.
Thanks
Farooq.

Rewards points if you found it useful

Similar Messages

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/

Hi i have i problem with my iphone and the problem is the security question i have forgot the answers

Hi i have i problem with my iphone and the problem is the security question i have forgot the answers
I understand German and Italian i littlebit English

You need to ask Apple to reset your security questions; this can be done by phoning AppleCare and asking for the Account Security team, or clicking here and picking a method, or if your country isn't listed in either article, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(106626)

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

how can i find out what the fix is that works..please

Problem with iTunes Match and the song "This will be (an everlasting love)" from Natalie Cole

Hello,
I'd like to report a problem with iTunes Match and Natalie Cole's song "This will be (an everlasting love)".
When I stream it or download it on another device I don't get Natalie Cole's song but another one from Maxine Nightingale (Right back where we started from).
Please tell me if you have the same problem or how I can report this problem to apple.
Thank you.

Hi,
This is a user to user forum - not Apple. Contact them http://www.apple.com/support/itunes/contact/
Alternatively if the song was purchased from iTunes, you may be able to report the problem by signing into you iTunes account on your computer. Report an problem with an item you bought from the iTunes Store, App Store, Mac App Store, or iBooks Store
JIm

Problems with tethered capture and the 4.2 update

I'm having problems with tethered capture and my canon 1ds mark III since I updated to 4.2. Is anybody else having issues with tethered capture that was working fine before the update?

http://forums.adobe.com/community/search.jspa?peopleEnabled=true&userID=&spotlight=false&c ontainerType=14&container=3316&rankBy=date&q=4.2+tethering

Problem with lenovo t60 and the vga output

I have a problem with the vga output and the lenovo t60
When i put the videoprojector connector in to the lenovo t 60, the projector reponde is:
Not supported
H: 48.20khz v: 143,10 hz
On my desktop pc the projector function on 1024x768 resolution and the 60 hz to refresh.
The same configurations are on my laptop and the projector doesn't function
Please help me.

I too have this problem. My T61 worked fine for about a year, and then suddenly would no longer project. I had made no changes to the settings for the external display, though since the problem started I've tried many combinations without success. Typically the projector reports that the frequency settings the laptop is sending are unsupported. In my case the vertical rate is usually correct (60 Hz) but the horizontal rate varies wildly.
I suspect a hardware problem, as this post suggests: http://www.edugeek.net/forums/av-multimedia-related/32128-laptop-wont-display-projector.html. (Note the message claiming that 6 out of 40 Lenovo laptops exhibited this problem.)
Since my system is still under warranty I guess I'll have to get it repaired, but I'd rather hear of a software fix...

Problems with update/insert and the ON clause

I have two rather identical mappings, both supporting SCD Type II. One of them works, the other one doesn't.
As in the SCD whitepaper, I have a split, that ultimately ends in a union, and then UPDATE/INSERTs into the target dimension. My problem is, that though using the matching_id for matching in one mapping, it is not allowed in the second mapping. The error is ORA-38104: The columns refererred in the ON-Clause cannot be updated "MyTable.MyId" (all loosely translated).
I just don't understand it, as it should be able to match the ID, and if not found, create a new record using INSERT.
I found a description of the error that sounded like this (https://cwisdb.cc.kuleuven.ac.be/ora10doc/server.101/b10744/e38001.htm):
ORA-38104: Columns referenced in the ON Clause cannot be updated: string
Cause: LHS of UPDATE SET contains the columns referenced in the ON Clause
Action: none
I just don't understand how this can be a problem, since I have to carry the surrogate key along, in order to assure that the proper records gets updated...
Anyone who can enlighten me on this one?
Regards
Kim

Oh yes :) I was a quite active participant. What puzzles me is, that I cannot get mapping #2 to work. I have tried to do everything virtually alike, with regards to the surrogate key, and the extra mapping column.
My setting for the keys are as below:
Surrogate Matching
Load column when inserting: yes no
Load column when updating: yes no
Match column when updating: no yes
Load column when deleting: no no
Table best viewed in notepad :)
It "feels" like it's trying to update the surrogate key, instead of actually matching.
Regards
Kim

Problem with outer joins and the class indicator/discriminator

Hello,
I am having a problem defining a query in toplink (10.1.3.3).
In the workbench, I have created a parent and 2 child descriptors. The parent is "AbstractValue", the children are "DefaultValue", classified by the discriminator 'DEF', and "OverrideValue", classified by 'OVR', both located in the same table.
Another descriptor (containing a one-on-one mapping to both a "DefaultValue", and a "OverrideValue") needs to be queried for its 'value'.
The way the query should act is: If an override value (row) exists, this one applies for that object. If an override doesn't exist, return the default value.
The query then comes down to (as I have it now):
builder.getAllowingNull("OverrideValue").getAllowingNull("value").ifNull(builder.get("DefaultValue").get("value")).equal(builder.getParameter(VALUE_PARAM));
The problem is that toplink adds the distinction for the different kind of "values" in the where clause WITHOUT checking for null values e.g. it performs an outer join, but then still checks for the discriminator value thus
....t1.ovr_id = t2.id(+) AND t2.discriminator = 'OVR' AND ...
instead of
... LEFT JOIN values t2 ON (t1.ovr_id = t2.id AND t2.discriminator = 'OVR') ...
This leads to the behaviour that the query returns ONLY the objects that have override and default values.
An overview of the queries (simplified)
Toplink, at the moment, returns only results if both override and default values exists:
SELECT t1.id
t1.def_id,
t1.ovr_id
FROM values t2,
parameter t1,
values t0
WHERE nvl(t2.value, t0.value) = 15 AND
t1.ovr_id = t2.id(+) AND t2.discriminator = 'OVR' AND
t1.def_id = t0.id AND t0.discriminator = 'DEF'
Situation Wanted:
SELECT t1.id
t1.def_id,
t1.ovr_id
FROM parameter t1
LEFT JOIN values t2 ON (t1.ovr_id = t2.id AND t2.discriminator = 'OVR')
JOIN values t0 ON (t1.def_id = t0.id AND t0.discriminator = 'DEF')
WHERE nvl(t2.value, t0.value) = 15
Anyone know if there is some statement I am missing to allow an actual outer join on descriptors containing class indicators/discriminators? A possible rewrite?
Thanks in advance,
Rudy

This is a bug in TopLink's outer join support for Oracle. Currently the outer join is put in the where clause, instead of the from clause, as we do on other platforms. You might be able to fix it by changing your OraclePlatform to return false for shouldPrintOuterJoinInWhereClause().
Please log this bug on EclipseLink, or through Oracle technial support.
There is a workaround using,
descriptor.getInhertiancePolicy().setAlwaysUseOuterJoinForClassType(true);
James : http://www.eclipselink.org

I have a problem with HP ToolboxFX and the encountered an error and can not recover error msg.

Restarting the software and/or the computer do not fix the error. I have installed the new firmware in my CP2025dn Color Laser it now has version 20110212 firmware. The error msg reports: windows version Win32NT-6.0.6002.131072 and HP Toolbox FX version 004.012.00146. I am running the printer on my wireless router. My computer is a Dell Studio with Vista Home Premium Service Pack 2 - 64 bit OS. My wife's older laptop with WIN XP is not having a problem with Toolbox. I have uninstalled and reinstalled Toolbox on my computer today also. Where do I look next? Thank you!!!

Hi
Please find the link given below might help you to fix your issue.
Link
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

I have the late 2013 Macbook Pro 15 inch with apple care, and the display flickers in a certain spot at a certain brightness. Has anyone ever had this issue, and what did you do about it?

I doubt this is a GPU issue i've restarted my Mac, but the shape of the flickering area is in a cone shape comming from the bottom edge from the right side in about 2 inches. I'm thinking this is a failing display?

Apple will cover it if it was an accident or defect. Take it to a nearby Genius bar. I'm guessing its a graphics card or display issue. But the symptoms of a damaged GPU for me were different. I had issues with my last 13" MacBook Pro non-retina mid 2012. If I set it down or moved my machine, my screen would flicker and the pixels would be completely off and the whole system would freeze, even if I wasn't using it. If it fronze when I didn't use it, it would get REALLY hot. Like I said, if it's an accident and less than a year old, Apple will cover repairs. If it's older than a year and it was accidental, AppleCare won't cover it. If it was a defect, it will be covered as long as the AppleCare hasn't expired. If you buy a MacBook through BestBuy, you could buy BestBuy Care which covers accidental and defects. My friend fried his last machine with water and apple was going to charge him the price of a new machine and BestBuy charged about $900 and then he paid extra to upgrade to a new retina display.

Problem with combo boxes and the reset button in certain situations

Hi Everyone,
i have a problem to make the reset-button function properly in an what-if analysis dashboard.
The dashboard uses two combo boxes that are not visible at the same time. In my application the second combo box only appears when a dedicated menu (label based menu button) has been activated.
So i have combo box 1 when menu A is active an dand combo box 2 when menu 2 is active.
After starting the dashboard initial values are fine. If you then directly change to menu 2 (seeing combo box 2 with
the correct default value) and press the reset button, the dashboard returns to the initial view, showing
the menu 1 with the correct default value. If you now switch back to menu 2, you will see, that the combo box 2
is empty (i.e. nothing selected).
I also tracked the destination cells for the combo box value results as well as the source cells for the "selected item" and the
destination cells for the "Insert Selected Item". All this values seem to be correct. Therefore i assume that
this is an issue of event handling. Maybe the combo box 2 does not refresh its selected value because it is already
invisible when the values are restored.
This case can easily be simulated by placing two combo boxes and a push button (that changes the visibility of
the combo boxes) and the reset button on the canvas.
Maybe someone can help. I am able to provide a test xlf, if neccessary.
Thanks,
Oliver
P.S. I am using Xcelsius SP4 (Version 5.4.0.0)

Hello Debjit_Singha_86,
thank you for your support. At the moment i have the following setting:
label based menu
- General: Insertion Type "value" from a list of ID's for the menu-items to a dedicated cell (current menu ID, say tab1!$A$1)
- Behavior: Selected item (position) fixted to item 1
hidden combo box
- General: Insertion Type "position" to a dedicated cell with the current choice (say tab1!$B$1)
- Behavior: Selected item (position) to the same cell (tab1!$B$1)
Can you give me a hint on how to connect the two components according to your solution, so that the label based menu sets the default for the hidden combox box only in case, that the reset button is pressed?
Thanks,
Oliver

Having problems with front row (and the opticle drive)

I bought my macbook three days ago, and I'm already having problems. First off, I transfered music from my user profile on my old iMac G5 to the macbook via data DVD. My music collection had some purchaces from the itunes store, so I had to go through the authorization thing, and I can now play them just fine in the iTunes library, but the problem is, if I try to use the front row program to play my purchaced music, I get the message saying that I have to authorize it first. What the ****? Does anybody else have this problem? Also, like many other macbook users, I'm having problems with the opticle drive, such as getting cds to be recognized and other things of that nature.

I noticed that this problem started after I tried to use a software to unlock my drive's region...
I believe this is the problem. The VLC Media Player will usually play DVDs from other regions without changing the settings on your optical drive. You may need to reset your optical drive's firmware back to the original setting, make sure you have the region set for the one you'd prefer to use the most and then use VLC to play the other DVDs.
-Doug
P.S. After two years in the Front Row forum, I'm not sure I've ever heard of anyone playing HDDVD_TS folders with Front Row. I'm not saying it won't work, but I'm not sure it's really supported either. I do have DVD Studio Pro myself, but I'll have friends or family staying with me for nearly the next month, so my evenings and weekends will be a bit full to try making one up for testing...

Driver Scanner will not update, there is a problem with proxy sttings and the firewall

Driver Scanner will not update. It says there is a problem in connecting to the Uniblue browser.
Also there is a problem with the proxy set up and the firewall.

With that one, let's try getting an installer log to the Apple engineers for a look.
1. Open a command prompt window. (Start menu -> Run. Type in "cmd". Hit return.)
2. Drag and drop iTunesSetup.exe onto the window so that the full pathname of the file is at the command line prompt.
3. Type in a space, then the following line:
/l*v C:\log.txt
4. Hit return.
5. The installer will create a log file:
C:\log.txt
Find that file and send it as an attachment to this email address: [email protected]
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

Wee Problem with Parallels Desktop and the Westmere Mac Pros

Just got my new Westmere 8-Core Mac Pro last Friday, and spent the last four days in agony.
I used Migration Assistant to transfer over my accounts from my old Mac Pro, but it crashed hard -- so hard that I had to reformat the hard drive and do a clean install of the system. So I decided to do a clean install of all of my programs as well, and the Westmere crashed on the Parallels Desktop installation. And, again, it crashed so hard that I had to reformat the hard drive and do a clean install of everything all over again.
Today, I read a review of the Westmere Mac Pros in Macworld (http://www.macworld.com/article/153704/2010/08/quad8_core_macpro_2010.html?lsrc=top2), and learned:
We ran into a problem running Parallels on the Westmere-based Mac Pros, so we could not complete the Speedmark 6 suite of tests. When booted into 64-bit mode (as the new Mac Pros do by default) the systems would crash with Parallels installed. Booting into 32-bit mode would allow the systems to start up, but we still couldn’t use Parallels. We eventually tried a complete wipe and reinstall from the Mac Pro’s systems disc and downloaded the very latest version of Parallels to eliminate any other potential problems, and had the same issue. Apple and Parallels are aware of the problem and assure me that Parallels is working diligently on a fix. The application worked just fine on the new quad-core Mac Pro with the Nehalem processor.
Hoped I saved somebody some time.

Hi akapod,
Looks like they may have the fix out.
Mac Pro (Mid 2010): Kernel panic when installing or restarting Parallels Desktop 5 for Mac
Please let me know if it's available and fixes it.
Thanks,
ivan

Problem with Mapping exectution and the display Queue

Similar Messages

Maybe you are looking for