Problem with MARS-55

HI GUYS.
recently i found my mars can not be accessible.i got some pictures and i hope someone can help me to Solve my problem.
thx
============================================================================
==============================================================================
===============================================================================
/dev/sda8 contains a file system with errors, check forced // i guess this disk partition has been destroyed.
is there any way to recover the system?
Looking forward to your answer

Hi Wei.
hi dustin , thanks for your reply
You're welcome.
now i just want to know is there any handbook can guide me to perform the "re-image"
Certainly, check the Re-Imaging a Local Controller section of the Install and Upgrade Guide.
so could you tell me where i can find the latest soft image for the mars-55
The latest version is (as of this writing) 6.1.3 and the System Recovery .ISO image file for 6.1.3 (what you would burn to a DVD-R disc and use to re-image the appliance following the steps linked above), can be downloaded here.
But, keep in mind that if you have NFS/SFTP Data Archives (backups) to restore, then you must re-image to the exact same version of software that created the latest backups (i.e. whatever version was running on the MARS prior to this failure) in order to be able to restore them.
"/dev/sda8 contains a file system with errors, check forced " when i "re-image" the mars , the problem partition/filesystem will start to repair itself ? that is to say i have no need to replace the harddisk?
The re-image operation will result in the appliance's partitions/filesystems being recreated (and working copies of the OS and software being copied over). Think of it as performing a fdisk, format, and clean install of an Operating System on a workstation/server. This should resolve the fsck (filesystem check) error message you've encountered. There could be an underlying hardware/media problem that caused the filesystem problem, but since no such messages are shown, the first step would be to eliminate filesystem corruption (by re-imaging), and then once complete, if the problem immediately recurred, it's possible there is a hardware problem that warrants further investigation.

Similar Messages

Problem with Mars J2k Images

Hi there
I have a problem with viewing the extracted images from a PDF
Doc
After saving the PDF Doc into the Mars Format, and then
extracting into folders I see the images
from the original PDF are converted to the J2k format , I
have tried several viewers but none are
able to open the images !
Any ideas?
Thanks a million

Hi,
Reading your message, I'm not 100% certain whether you are
asking if there are any viewers capable of displaying JPEG2000 or
if you are saying that compatible viewers can't display the
JPEG2000 we produce.
If you are just looking for a viewer, IrfanView (a freeware
image viewer) can display them (though you have to download a free
image compatibility pack from their site). It is also my
understanding that there is a free JPEG2000 plug-in included with
Photoshop CS4, which is capable of viewing and converting JPEG2000
files (though it is not installed by default).
If you have tools which you think are capable of viewing
JPEG2000 and are still having problems with our images, please let
me know.
Thanks,
Matt
[Edit: Update information and fix minor typo]

Problem in MARA table for the field PSTAT

Dear all,
I am facing a problem with mara table , for a material it is showing "C" Classification status in MARA table in field PSTAT
But if im going to Transaction MM03 with the same material im not able to find any Classification view there(mm03).
Please help me why is this happening and what is the possible solution for this .
Many Thanks!!!
rewards will be given....

Hi,
In relation to the issue, there are a number of reasons why the
classification view may not be displaying in MM02/MM03:
1. OMS2 customising settings for material type
2. OMT3 customising settings for the screen sequence
3. Authorisation object M_MATE_STA
If these settings are correct, kindly refer to the note 113966.
If there are inconsistencies in the material status in MARA and MARC
then report ZRMMMSTAT outlined in this note should resolve the issue.
Best regards
Erika

Mars Version: Problems with Dynamic menu contribution

I create an "Eclipse 4 Application project" called test with Luna and Mars version.
In my Application I add a Dynamic Menu Item called ToTo with the following code:
Quote:
package test.handlers;
import java.util.Date;
import java.util.List;
import org.eclipse.e4.ui.di.AboutToShow;
import org.eclipse.e4.ui.di.AboutToHide;
import org.eclipse.e4.ui.model.application.ui.menu.MDirectMenuItem;
import org.eclipse.e4.ui.model.application.ui.menu.MMenuElement;
import org.eclipse.e4.ui.model.application.ui.menu.MMenuFactory;
public class Toto {
@AboutToShow
public void aboutToShow(List<MMenuElement> items) {
MDirectMenuItem dynamicItem = MMenuFactory.INSTANCE.createDirectMenuItem();
dynamicItem.setLabel("Dynamic Menu Item (" + new Date() + ")");
dynamicItem.setContributorURI("platform:/test/");
dynamicItem.setContributionURI("bundleclass://test/test.handlers.DirectMenu");
items.add(dynamicItem);
@AboutToHide
public void aboutToHide(List<MMenuElement> items) {
And the following code for the DirectMenu:
Quote:
package test.handlers;
import org.eclipse.e4.core.di.annotations.Execute;
public class DirectMenu {
@Execute
public void execute() {
System.out.println("Direct Menu Item selected");
With Luna version when I click on the menu Item I have the date and the execute part is OK
With Mars the item is here with the date, but when I click the execute is never executed?????
Can you help me!!!
Regards
Antonio

Dirk Fauth wrote on Fri, 03 July 2015 10:11It is not that easy to integrate the correction. You would need to copy the MenuManagerRenderer code to a local class and use the patched MenuManagerHideProcessor in that class. Than register the modified MenuManagerRenderer in the context so it is used instead of the default one.
So you need to get the code of MenuManagerRenderer out of the platform code, then the MenuManagerHideProcessor from Gerrit and you need to know how to replace the renderer. For the last there should be a tutorial by Lars Vogel somewhere.
Of course you should also vote for the posted ticket, to increase the visibility.
Hello Dirk,
could you please describe in more detail a way how to get this workaround working on Mars? Matt Biggs mentioned similar thing in bug report id=469581 but I don't know how to make it work.
I've created a class called MenuManagerHideProcessor with a patch from git. I don't know how to do second part (registration). I read Lars article about renderers at vogella page. (Eclipse4Renderer) and found a property "CUSTOM_RENDERER_URI". I did following in @AboutToShow method:
MDirectMenuItem directMenuItem = MMenuFactory.INSTANCE.createDirectMenuItem();
directMenuItem.getPersistedState().put("CUSTOM_RENDERER_URI", MENU_MANAGER_URI);
directMenuItem.setLabel(view.getLabel());
directMenuItem.setContributionURI(SHOW_HANDLER);
It seems that this is not the way how it should be done.
Thank You for any insights
PS: Sorry I couldn't post a direct links to bug tracker and vogella site because of "You can only use links to eclipse.org sites while you have fewer than 5 messages".

Hyperion planning installation(Problem with application server deployment)

Hi There:
I am new to hyperion planning.I am trying to install planning.I got problem with Hyperion Configuration utility while configuring application server deployment.Its show message failed.Please guide me how to fix this.If it is possible can you please send me any personal documentation on installation.I am trying this for past 4 day's.Below is the error its showing in configtool
     ... 10 more
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, INFO, Validating dependencies...
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel$5, DEBUG, Product: Planning; Dependencies: []
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, DEBUG, task to execute: HspDBPropertyLocation
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.ProductTaskSelectionPanel, DEBUG, task to execute: applicationServerDeployment
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.PanelEventDispatcher, DEBUG, constructor
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryEnter
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebLogic 8.1; deployment type = both
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: WebSphere 5.1; deployment type = both
(Mar 09, 2008, 08:26:04 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, Server: Tomcat 5.0.28; deployment type = both
(Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, INFO, AppServerSelectionPanel in queryExit
(Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.AppServerSelectionPanel, DEBUG, AppServer selected: WebLogic 8.1
(Mar 09, 2008, 08:26:08 PM), com.hyperion.cis.config.wizard.ProductCustomInputPanel, ERROR, Error:
java.lang.NullPointerException
     at com.hyperion.cis.config.wizard.ProductCustomInputPanel.queryEnter(ProductCustomInputPanel.java:88)
     at com.installshield.wizard.awt.AWTWizardUI.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.swing.SwingWizardUI.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.StandardWizardListener.currentBeanChanged(Unknown Source)
     at com.installshield.wizard.Wizard$RunThread.run(Unknown Source)
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, Starting WebLogic 8.1 deployment...
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, pre-Deploy: Planning
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.AppServerDeployer, DEBUG, Deploy: Planning
(Mar 09, 2008, 08:26:09 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.NullPointerException
     at com.hyperion.cis.config.AppServerDeployer.initContexts(AppServerDeployer.java:628)
     at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:548)
     at com.hyperion.cis.config.AppServerDeployer.deploy(AppServerDeployer.java:526)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDeployerTask(RunAllTasksWizardAction.java:251)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:156)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Mar 09, 2008, 08:26:13 PM), com.hyperion.cis.config.wizard.CustomSummaryPanel, DEBUG, CustomSummaryPanel in queryExit
Please help me.Email id:[email protected]
Thanks
Harsha.
Message was edited by:
user603943

I think the installation of planning on Vista is difficult. As some of the files doesn't support even i am tired of doing that.
But tell me one thing have you installed all other products , I mean Essbase, (server, client) , AAS and Shared services.
Are they working good .
I have formatted my system to XP and installed everything , but the problem is when i install planning it prompts me that IIS 5 should be greater other wise EPM will not install...
there are lot of things with planning 1) i can't datasource as it is not highlighting when we configure with Shared services
2) It does not create product instance .
If any one can fix this thing by giving me a suggestions.
Advance Thanks

Java Webstart application problem with TLS certificate revocation checks (Java 1.7.0_76)

We have a problem with our Java Web Start Application regarding the TLS certificate revocation check:
The application is running on a server within a wide area network which is separated from the internet.
The application users have access to the WAN, and also access to the internet over some corporate proxy/firewall.
The user has to enter, for example "https://my-site.de/myapp/ma.jnlp" within a webbrowser or could also call "javaws https://my-site.de/myapp/ma.jnlp" to start the application client.
The webserver has a certificate from a trusted certificate authority. This certificate seems to be ok, the browser is even configured to perform OCSP status check.
The application files are signed with a certificate from another trusted certificate authority. This certificate seems also to be ok. Regarding this certificate there
are no problems with certificate revocation checks.
The problem is, while starting the application client there is a message box which tell us something like "the connection to this website ist not trustworthy",
"Website: https://my-site.de:80", and something about an invalid certificate, meaning the webserver certificate.
Obviously the jvm runtime, which is executed on the users workstation, tries to perform a revocation check for the webservers certificate, but this fails because
it cannot fetch the certificate under https://my-site.de:80.
The application will execute without further problems after that message but the users are very concerned about the "invalid" certificate, so here are my questions:
- Why is the application trying to get the webserver certificate over Port 80. Our application developers told me, there is no corresponding statement. Calling this address
has to fail while "https://my-site.de:443" or "https://my-site.de" would not have a problem.
- Is there a way to make the application go on without performing a tls revocation check? I mean, by adjusting the application sourcecode and not by configuring the users Java Control Panel.
While disabling the TLS Certificate Revocation check in the Java Control Panel, the Webstart Application executes without a warning message, but this is not a workable solution for
our users.
It would be great if someone can help me with a hint so i can send our developers into the right direction;-)
Many thanks!
This is a part from a java console output after calling "javaws -verbose https://my-site.de/myapp/"
(sorry for this is in german... and also my english above)
network: Verbindung von http://ocsp.serverpass.telesec.de/ocspr mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
network: Verbindung von http://ocsp.serverpass.telesec.de/ocspr mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
security: OCSP Response: GOOD
network: Verbindung von http://ocsp.serverpass.telesec.de/ocspr mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
security: UNAUTHORIZED
security: Failing over to CRLs: java.security.cert.CertPathValidatorException: OCSP response error: UNAUTHORIZED
network: Cacheeintrag gefunden [URL: http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl, Version: null] prevalidated=false/0
cache: Adding MemoryCache entry: http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl
cache: Resource http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl has expired.
network: Verbindung von http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
network: Verbindung von http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl mit Proxy=HTTP @ internet-proxy.***:80 wird hergestellt
network: ResponseCode für http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl: 200
network: Codierung für http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl: null
network: Verbindung mit http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl trennen
CacheEntry[http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl]: updateAvailable=true,lastModified=Tue Mar 24 10:50:01 CET 2015,length=53241
network: Verbindung von http://crl.serverpass.telesec.de/rl/TeleSec_ServerPass_CA_1.crl mit Proxy=HTTP @ internet-proxy.***:80 wird
network: Verbindung von socket://ldap.serverpass.telesec.de:389 mit Proxy=DIRECT wird hergestellt
security: Revocation Status Unknown
com.sun.deploy.security.RevocationChecker$StatusUnknownException: java.security.cert.CertPathValidatorException: OCSP response error: UNAUTHORIZED
    at com.sun.deploy.security.RevocationChecker.checkOCSP(Unknown Source)
    at com.sun.deploy.security.RevocationChecker.check(Unknown Source)
    at com.sun.deploy.security.RevocationCheckHelper.doRevocationCheck(Unknown Source)
    at com.sun.deploy.security.RevocationCheckHelper.doRevocationCheck(Unknown Source)
    at com.sun.deploy.security.RevocationCheckHelper.checkRevocationStatus(Unknown Source)
    at com.sun.deploy.security.X509TrustManagerDelegate.checkTrusted(Unknown Source)
    at com.sun.deploy.security.X509Extended7DeployTrustManagerDelegate.checkServerTrusted(Unknown Source)
    at com.sun.deploy.security.X509Extended7DeployTrustManager.checkServerTrusted(Unknown Source)
    at sun.security.ssl.ClientHandshaker.serverCertificate(Unknown Source)
    at sun.security.ssl.ClientHandshaker.processMessage(Unknown Source)
    at sun.security.ssl.Handshaker.processLoop(Unknown Source)
    at sun.security.ssl.Handshaker.process_record(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.readRecord(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
    at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
    at sun.net.www.protocol.https.HttpsClient.afterConnect(Unknown Source)
    at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
    at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
    at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
    at com.sun.deploy.net.HttpUtils.followRedirects(Unknown Source)
    at com.sun.deploy.net.BasicHttpRequest.doRequest(Unknown Source)
    at com.sun.deploy.net.BasicHttpRequest.doGetRequestEX(Unknown Source)
    at com.sun.deploy.cache.ResourceProviderImpl.checkUpdateAvailable(Unknown Source)
    at com.sun.deploy.cache.ResourceProviderImpl.isUpdateAvailable(Unknown Source)
    at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
    at com.sun.deploy.cache.ResourceProviderImpl.getResource(Unknown Source)
    at com.sun.deploy.model.ResourceProvider.getResource(Unknown Source)
    at com.sun.javaws.jnl.LaunchDescFactory._buildDescriptor(Unknown Source)
    at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
    at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
    at com.sun.javaws.Main.launchApp(Unknown Source)
    at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
    at com.sun.javaws.Main.access$000(Unknown Source)
    at com.sun.javaws.Main$1.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    Suppressed: com.sun.deploy.security.RevocationChecker$StatusUnknownException
        at com.sun.deploy.security.RevocationChecker.checkCRLs(Unknown Source)
        ... 35 more
Caused by: java.security.cert.CertPathValidatorException: OCSP response error: UNAUTHORIZED
    at sun.security.provider.certpath.OCSP.check(Unknown Source)
    at sun.security.provider.certpath.OCSP.check(Unknown Source)
    at sun.security.provider.certpath.OCSP.check(Unknown Source)
    ... 36 more
security: Ungültiges Zertifikat vom HTTPS-Server
network: Cacheeintrag nicht gefunden [URL: https://my-site.de:80, Version: null]

Add the JSF Jars to the WEB-INF/lib directory of the application. If still getting error add to the CLASSPATH variable in the startWebLogic script in the domain/bin directory.

Problem with installation of Adobe Flash Player on mac

Hi, i have a macintosh with OsX Yosemite 10.10.2 and i can't update the software to te last version. The download always stop at 20-30%. It's not a problem of my internet connection. I tried to uninstall e reinstall flash player, but i have the same problem, with the difference that now i neither have the software... What can i do? Thank you!

Hi,
Ok. So I found this and it worked:
1. Re: Flash download freezes at 25%. What will help?
Jeromie Clark Mar 18, 2015 5:00 PM (in response to Geri J)
Please use the offline installer:
http://fpdownload.macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg
Download the install package from this link. Double-click to open it from your downloads folder; when you see the red "install" folder, right-click it and select "Show Package Contents"; click on the "Contents" folder; then click on the "Resources" folder; then double-click on the "Adobe Flash Player.pkg" file. The installation will start. It worked for me.... FINALLY!! I hope it also works for you.

DHCP Problem with ASA 5505

Hi. I have an ASA 5505 configured for Transparent Mode. The Outside interface connects to a router (RV042). The router manages DHCP. With the 5505 in the system, all computers can connect to the internet and to each other, except for a few. The problem computers can be made to work if they are set to a specific address, rather than automatically assigned by the router. Some of the iPads work correctly, some do not. At least one Apple Notebook cannot connect even if I enter a static address.
Consulting the documentation, I found that DHCP traffic (UPD Port 67 and 68) needed to be enabled via rules for the Inside and Outside interfaces. I did that in ASDM but now nothing works.
I have pulled the 5505 out of the system and restored it to the configuration that worked for most of the computers.
Any suggestions would be appreciated. I can pull a "show" run from CLI if it is useful.
Thanks...

Understood. I tried adding the "inside_out extended permit ip any any" command, but it made no difference. Because the implicit rule (permit ip traffic to any less secure interface) is still in the access list table, it would seem the additional extended rule is not needed.
When I first received the 5505, it had an older version of firmware. At the time, when I entered any rule in ASDM it deleted the "less secure" implicit rule, which then broke the system since there was no path for internet traffic from inside to outside, as you have stated. With the newest firmware release, however, when I enter a rule, the "less secure" implicit rule does not go away.
So, with help from the folks here I have made progress. Right now the issue is that when the 5505 in Transparent Mode is between the router and user computers, the computers cannot reliably get addresses that are auto-assigned by the router.
Looking through the logs displayed on ASDM, I noticed the following curious statement:
"6 Mar 31 2014 07:16:42 fe80::1131:41c2:3627:8339 63575 ff02::1:3 5355 No management IP address configured for transparent firewall. Dropping protocol UDP packet from outside:fe80::1131:41c2:3627:8339/63575 to inside:ff02::1:3/5355"
However, I have configured a management IP address, and it is listed in the "show" document that I posted yesterday:
interface BVI1
ip address 192.168.1.10 255.255.255.0
So, I am confused.
I appreciate the help. I am new to the 5505, although I participated as a "friendly" in the ASA program some years ago. I recall a similar problem with that setup. Regrettably, I can't remember how we fixed it...
Regards...

Problem with Itunes 9.1 on Windows 7

Hi all
Problem with the 9.1 version of itunes. I download the update and everything went ok and till i reboot the pc and gave me this messages. "Apple sync notifier "The program can't start corefundation.dll missing from this computer".
Trying to fix the problem i uninstall itunes, Quick, apple application device, apple mobile device, and software update and reboot the pc and reinstall everything. This time everything went right and no more message but now if i click to open itunes it not runs and safari is making my computer slow and it freeze for seconds.
Any idea what could be my problem?

Same problem here. Running the iTunes network diagnostic doesn't enlighten me: it tells me that connectivity to the iTunes store is fine. My firewall tells me that when iTunes starts it attempts to connect to "http://wpad/wpad.dat" which of course fails because the unqualified domain name gets my local domain added to it (and I don't have a host called ipad on my network).
Here's the report; in case it helps Apple figure out what's wrong:
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
Hewlett-Packard HP Compaq 2710p (434566R)
iTunes 9.1.0.79
QuickTime 7.6.6
FairPlay 1.7.16
Apple Application Support 1.2.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.0.0.102
Apple Mobile Device Driver not found.
Bonjour 2.0.0.34 (214.3)
iTunes Serial Number [DELETED]
Current user is an administrator.
The current local date and time is 2010-04-01 16:05:14.
iTunes is not running in safe mode.
Video Display Information
Mobile Intel(R) 965 Express Chipset Family
Mobile Intel(R) 965 Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
The drive D: MATSHITA DVD-RAM UJ-844S Rev 1.00 is a USB 2 device.
iPodService 9.1.0.79 is currently running.
iTunesHelper 9.1.0.79 is currently running.
Apple Mobile Device service 3.0.0.0 is currently running.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {0487F0A0-2F5C-4615-B484-2E0EA6294BAC}
Description: Intel(R) Wireless WiFi Link 4965AGN - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server: 10.10.1.1
Lease Obtained: Wed Mar 31 21:11:15 2010
Lease Expires: Thu Apr 01 09:11:15 2010
DNS Servers: 10.10.1.1
10.10.1.1
Adapter Name: {95041341-AD4D-4047-9219-4730035AFD21}
Description: Intel(R) 82566MM Gigabit Network Connection - Packet Scheduler Miniport
IP Address: 10.10.1.14
Subnet Mask: 255.255.255.0
Default Gateway: 10.10.1.1
DHCP Enabled: Yes
DHCP Server: 10.10.1.1
Lease Obtained: Thu Apr 01 15:41:19 2010
Lease Expires: Fri Apr 02 03:41:19 2010
DNS Servers: 10.10.1.1
10.10.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is off.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2010-03-12 14:22:25.

Problem with JFrame code

Can anyone say the problem with the attached code. When I run the program, only, maximize, minimize and close options are viewable and nothing else.
import java.awt.Color;
import java.awt.Container;
import java.awt.Dimension;
import java.awt.FlowLayout;
import java.awt.Graphics;
import java.awt.GridBagConstraints;
import java.awt.GridBagLayout;
import java.awt.Image;
import java.awt.Insets;
import javax.swing.ImageIcon;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JPanel;
import javax.swing.JTextField;
import javax.swing.border.LineBorder;
* Created on Mar 24, 2008
* @author Anand
public class JBackGroundImageDemo extends JFrame
    Container con = null;
    JPanel panelBgImg;
    public JBackGroundImageDemo()
        setTitle("JBackGroundImageDemo");
        con = getContentPane();
        con.setLayout(null);
        ImageIcon imh = new ImageIcon("aditi.jpg");
        setSize(imh.getIconWidth(), imh.getIconHeight());
        panelBgImg = new JPanel()
            public void paintComponent(Graphics g)
                Image img = new ImageIcon("aditi.jpg").getImage();
                Dimension size = new Dimension(img.getWidth(null), img.getHeight(null));
                setPreferredSize(size);
                setMinimumSize(size);
                setMaximumSize(size);
                setSize(size);
                setLayout(null);
                g.drawImage(img, 0, 0, null);
        con.add(panelBgImg);
        panelBgImg.setBounds(0, 0, imh.getIconWidth(), imh.getIconHeight());
        GridBagLayout layout = new GridBagLayout();
        JPanel panelContent = new JPanel(layout);
        GridBagConstraints gc = new GridBagConstraints();
        gc.insets = new Insets(3, 3, 3, 3);
        gc.gridx = 1;
        gc.gridy = 1;
        JLabel label = new JLabel("UserName: ", JLabel.LEFT);
        panelContent.add(label, gc);
        gc.gridx = 2;
        gc.gridy = 1;
        JTextField txtName = new JTextField(10);
        panelContent.add(txtName, gc);
        gc.insets = new Insets(3, 3, 3, 3);
        gc.gridx = 1;
        gc.gridy = 2;
        gc.gridwidth = 2;
        JButton btn = new JButton("Login");
        panelContent.add(btn, gc);
        panelContent.setBackground(Color.GRAY);
        panelContent.setBorder(new LineBorder(Color.WHITE));
        panelBgImg.add(panelContent);
        panelBgImg.setLayout(new FlowLayout(FlowLayout.CENTER, 150, 200));
        setResizable(false);
        setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    public static void main(String[] args)
        new JBackGroundImageDemo().setVisible(true);
     Please help.
Regards,
Anees

Here's you a little code example, it works, so take a look at it.
import java.awt.Dimension;
import java.awt.Graphics;
import java.awt.Image;
import java.awt.MediaTracker;
import java.awt.Toolkit;
import javax.swing.JFrame;
import javax.swing.JPanel;
public class Junk{
public Junk(){
public void makeFrame(){
    JFrame j = new JFrame("Junk");
    Toolkit t = Toolkit.getDefaultToolkit();
    MediaTracker mt = new MediaTracker(j);
    Image img = t.getImage("junk.jpg");
    mt.addImage(img, 0);
    try{
      mt.waitForID(0);
    }catch(InterruptedException e){
      System.out.println("Hey, we were too impatient!");
    myPanel p = new myPanel(img);
    p.setPreferredSize(new Dimension(img.getWidth(null), img.getHeight(null)));
    j.add(p);
    j.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
    j.pack();
    j.setVisible(true);
public static void main(String[] args){
    new Junk().makeFrame();
class myPanel extends JPanel{
    Image img;
    myPanel(Image img){
      this.img = img;
    public void paintComponent(Graphics g){
      g.drawImage(img, 0, 0, this);
}BTW: your image should be in your project folder.

Problem with archivelogs in a phy stb

Hi every body!
I want ask you about my problem with the archivelogs in a physical standby.
this standby works perfectly, but every time it recives a archivelog from the primary database, it generates another archivelog bigger than the it recives.
-rw-r----- 1 oracle dba 43314176 Mar 13 16:06 1_1794.dbf
-rw-r----- 1 oracle dba 52429824 Mar 13 16:06 1_1795.dbf
Those files are archivelogs. 1794 is recived from the primary database, and 1795 is generated by the standby, as you can see the 1795 is bigger than 1794.
when i generate another archivelog this is the result:
-rw-r----- 1 oracle dba 4290560 Mar 13 16:40 1_1795_637513013.dbf
-rw-r----- 1 oracle dba 52429824 Mar 13 16:40 1_1796_637513013.dbf
i generate 1795 in primary database, and physical standby generated 1796...
Doy you know the solution to my problem....
Thanks a lot for your time.

Yep you do have to down the standby database I'm afraid, do a shutdown immediate then a startup nomount then issue the alter database mount standby database; command. Once this is done run the below statements to recreate the relevant standby redo logs. See the below SQL for a syntax example.
ALTER DATABASE DROP STANDBY LOGFILE GROUP 4;
ALTER DATABASE DROP STANDBY LOGFILE GROUP 5;
ALTER DATABASE ADD STANDBY LOGFILE GROUP 4 ('D:\somepath\STBYREDO_GRP4_A.LOG','D:\somepath\STBYREDO_GRP4_B.LOG') SIZE 100M;
ALTER DATABASE ADD STANDBY LOGFILE GROUP 5 ('D:\somepath\STBYREDO_GRP5_A.LOG','D:\somepath\STBYREDO_GRP5_B.LOG') SIZE 100M;

Problem with date format from Oracle DB

Hi,
I am facing a problem with date fields from Oracle DB sources. The date format of the field in DB table is 'Date base type is DATE and DDIC type is DATS'.
I mapped the date fields to Date characters in BI. Now the data that comes to PSA is in weird format. It shows like -0.PR.09-A
I have changing the field settings in DataSource to internal and external and also i have tried mapping these date fields to text fields with out luck. All delivers the same format.
I have also tried using conversion routines like, CONVERSION_EXIT_IDATE_INPUT to change format. It also delivers me the same old result.
If anybody of you have any suggestions or if anybody have you experienced such probelms, Please share your experience with me.
Thanks in advance.
Regards
Varada

Thanks for all your reply. I can only the solutions creating view in database. I want some solution to be done in BI. I appreciate if some of you have idea in it.
The issue again in detail
I am facing an issue with date fields from oracle data. The data that is sent from Oracle is in the format is -0.AR.04-M. I am able to convert this date in BI with conversion routine in BI into format 04-MAR-0.
The problem is, I am getting data of length 10 (Output format) in the format -0.AR.04-M where the month is not in numericals. Since it is in text it is taking one character spacing more.
I have tried in different ways to convert and increased the length in BI, the result is same. I am wondering if we can change the date format in database.
I am in puzzle with the this date format. I have checked other Oracle DB connections data for date fields in BI, they get data in the format 20.081.031 which will allow to convert this in BI. Only from the system i am trying creating a problem.
Regards
Varada

Problem with Java after System Upgrade to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $ java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
cheers

Hi man,
In the wake of this java problem I resorted to keep working on my old machine, and today in my spare time I tried to fix this new machine.
So I execute $java on prompt, and then try to check the files it has opened, using lsof -p pid
I see it referring to
/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
isn't this usually the JAVA_HOME
However, executing $/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
hangs!!
but
$/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java
works!!
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home/bin
$ ./java -version
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06-153)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0_07-b06-57, mixed mode)
So, I changed the links as follows
borgraf:Versions raveesh$ l
total 72
drwxr-xr-x 3 root wheel 102 Mar 6 2008 1.3.1
lrwxr-xr-x 1 root wheel 3 May 21 19:42 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 May 21 19:42 1.6.0
lrwxr-xr-x 1 root wheel 3 May 21 19:44 OldCurrentJDK -> 1.5
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.4.2
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.5.0
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.6 -> 1.6.0
lrwxr-xr-x 1 root wheel 1 May 21 19:44 OldCurrent -> A
drwxr-xr-x 8 root wheel 272 May 21 19:44 A
lrwxr-xr-x 1 root wheel 3 Jun 4 17:14 CurrentJDK -> 1.6
lrwxr-xr-x 1 root wheel 3 Jun 4 17:21 Current -> 1.6
Linking my Current and CurrentJDK to 1.6 and it works!
However, shall that be the reason!
what is in your /Versions/Current/
I got the following
$ ls /System/Library/Frameworks/JavaVM.framework/Versions/Current
CodeResources Frameworks JavaVM
Commands Headers Resources
There is no /Home in here, which is usually the case for /1.5 or /1.6
Anyways, things seems to work for the moment. Lets see if I get problem with using Java.
thanks

System crashes after waking; problems with distnoted, graphics chip error

I am running 10.3.9 on a Dual 1 GHz G4, with 1.5 GB SDRAM, a GeForce4 Ti 4600 LCD display, and a LaCie 1394 external drive. I have recently started to put my computer to sleep at night, rather than leaving it running 24 hours a day (I also installed sleepwatcher, to allow me to put my computer to sleep remotely, and anacron, to allow the nightly system maintenance jobs to continue to run). This was working fine for about a week, but for the last two days, when I woke my computer up in the morning, I got kernel panics after a few minutes. First some aspects of the display would start to get mangled (e.g. strange lines appearing, some text that I typed not showing up, icons in the dock looking speckled, etc.), then some applications would stop responding, and then a minute or so later I would get the feared kernel panic message ("You need to restart your computer" in multiple languages).
This problem only seems to occur after the computer has been asleep for a long time (I've only experienced it after it's been asleep for 12 hours or so, and not when it's only been asleep for a few minutes). The only thing I can think of that I've changed in the last few days is an AppleScript that mounts my external LaCie drive (using "do shell script diskutil mountDisk ...") before backing up my files - using FoldersSynchronizer - then putting my computer to sleep (before I was never UNmounting this drive, so I didn't have to mount it in the AppleScript - I was still using the script to back up the files then put the computer to sleep).
I have tried running Apple's Disk Utility (both to repair the permissions, and to repair the disk), DiskWarrior (to rebuild my startup disk), fsck, and TechTool Deluxe. None seemed to reveal any major errors except the "Surface Scan" in TechTool, which failed, presumably because of media defects in the disk (but my understanding is that fixing this would require reformatting my disk, something that I only want to do as a last resort).
My system.log shows the following, from the time I woke my computer to the time I restarted (I've highlighted some suspicious-looking lines). It seems like the problem might either be occurring in distnoted, or with the graphics chip. Any thoughts on how I can determine the cause of the problem?
Mar 28 10:58:31 localhost kernel: System Sleep
Mar 28 10:58:38 localhost kernel: System Wake
Mar 28 10:58:38 localhost kernel: Wake event 0020
Mar 28 10:58:38 localhost kernel: enableClockSpreading returned with 0
Mar 28 10:58:38 localhost kernel: AppleNMI unmask NMI
Mar 28 10:58:38 localhost kernel: Adaptec warning: Resetting SCSI bus.
Mar 28 10:58:38 localhost kernel: FWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
Mar 28 10:58:38 localhost kernel: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Half Duplex
Mar 28 10:58:44 localhost mDNSResponder[186]: mDNSResponder Waking at 1236250
Mar 28 10:58:44 localhost SymMissedTask - parent[233]: sleeptime recorded: Mon Mar 27 16:05:06 2006
Mar 28 10:58:44 localhost SymMissedTask - parent[233]: waketime is: Tue Mar 28 10:58:44 2006
Mar 28 10:59:04 localhost crontab[436]: (root) LIST (root)
Mar 28 10:59:04 localhost crontab[438]: (root) LIST (sage)
Mar 28 11:05:09 localhost crashdump: Unable to determine CPSProcessSerNum pid: 151 name: distnoted
Mar 28 11:05:09 localhost mach_init[2]: Server 0 in bootstrap d03 uid 0: "/usr/sbin/distnoted": exited as a result of signal 10 [pid 151]
Mar 28 11:05:09 localhost crashdump: Started writing crash report to: /Library/Logs/CrashReporter/distnoted.crash.log
Mar 28 11:05:09 localhost crashdump: Finished writing crash report to: /Library/Logs/CrashReporter/distnoted.crash.log
Mar 28 11:05:10 localhost kernel: Graphics chip error! Restarted.
Mar 28 11:05:15 localhost last message repeated 2 times
Mar 28 11:05:19 localhost crashdump: Unable to determine CPSProcessSerNum pid: 448 name: distnoted
Mar 28 11:05:19 localhost crashdump: Started writing crash report to: /Library/Logs/CrashReporter/distnoted.crash.log
Mar 28 11:05:19 localhost mach_init[2]: Server 180b in bootstrap d03 uid 0: "/usr/sbin/distnoted": exited as a result of signal 10 [pid 448]
Mar 28 11:05:19 localhost crashdump: Finished writing crash report to: /Library/Logs/CrashReporter/distnoted.crash.log
Mar 28 11:05:20 localhost kernel: Graphics chip error! Restarted.
Mar 28 11:05:29 localhost last message repeated 7 times
Mar 28 11:06:59 localhost last message repeated 12 times
Mar 28 11:07:01 localhost crashdump: Started writing crash report to: /Users/sacks/Library/Logs/CrashReporter/MouseWorks Background.crash.log
Mar 28 11:07:01 localhost kernel: Graphics chip error! Restarted.
Mar 28 11:07:02 localhost crashdump: Finished writing crash report to: /Users/sacks/Library/Logs/CrashReporter/MouseWorks Background.crash.log
Mar 28 11:07:11 localhost kernel: Graphics chip error! Restarted.
Mar 28 11:07:14 localhost last message repeated 2 times
Mar 28 11:07:24 localhost kernel: NVKernel::initializeChannel time out.
Mar 28 11:08:43 localhost syslogd: restart
Yesterday's crash looks similar, except that the Graphics chip error occurs 13 seconds before the distnoted error (rather than after the distnoted error), and rather than a crash of "MouseWorks Background" there was a crash of "WindowServer". A log file from a few days ago, when I woke my computer up without a crash, has one line that is now absent: Mar 23 08:48:43 nitrogen kernel: AFPSleepWakeHandler: waking up.
panic.log contains:
Tue Mar 28 11:08:55 2006
Unresolved kernel trap(cpu 1): 0x300 - Data access DAR=0x000000003AA4C34E PC=0x000000000099E54C
Latest crash info for cpu 1:
Exception state (sv=0x2CD3AC80)
PC=0x0099E54C; MSR=0x00009030; DAR=0x3AA4C34E; DSISR=0x40000000; LR=0x0099EFA0; R1=0x19D63AC0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0099FF28 0x0099EFA0 0x00997468 0x00988020 0x0027E650 0x00280324 0x0007AC48 0x00021668
0x0001BCE8 0x0001C0F0 0x00094318 0x00000000
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(3.4.2)@0x981000
dependency: com.apple.iokit.IOPCIFamily(1.4)@0x4b3000
dependency: com.apple.iokit.IOGraphicsFamily(1.3.5)@0x4c6000
dependency: com.apple.NVDAResman(3.4.2)@0x4fc000
dependency: com.apple.iokit.IONDRVSupport(1.3.5)@0x4e6000
Proceeding back via exception chain:
Exception state (sv=0x2CD3AC80)
previously dumped as "Latest" state. skipping...
Exception state (sv=0x2CDA8000)
PC=0x900078B8; MSR=0x0200F030; DAR=0xE0FA8000; DSISR=0x42000000; LR=0x90007438; R1=0xBFFEE3D0; XCP=0x00000030 (0xC00 - System call)
Kernel version:
Darwin Kernel Version 7.9.0:
Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
panic(cpu 1): 0x300 - Data access
Latest stack backtrace for cpu 1:
Backtrace:
0x00083498 0x0008397C 0x0001EDA4 0x00090C38 0x0009402C
Proceeding back via exception chain:
Exception state (sv=0x2CD3AC80)
PC=0x0099E54C; MSR=0x00009030; DAR=0x3AA4C34E; DSISR=0x40000000; LR=0x0099EFA0; R1=0x19D63AC0; XCP=0x0000000C (0x300 - Data access)
Backtrace:
0x0099FF28 0x0099EFA0 0x00997468 0x00988020 0x0027E650 0x00280324 0x0007AC48 0x00021668
0x0001BCE8 0x0001C0F0 0x00094318 0x00000000
Kernel loadable modules in backtrace (with dependencies):
com.apple.GeForce(3.4.2)@0x981000
dependency: com.apple.iokit.IOPCIFamily(1.4)@0x4b3000
dependency: com.apple.iokit.IOGraphicsFamily(1.3.5)@0x4c6000
dependency: com.apple.NVDAResman(3.4.2)@0x4fc000
dependency: com.apple.iokit.IONDRVSupport(1.3.5)@0x4e6000
Exception state (sv=0x2CDA8000)
PC=0x900078B8; MSR=0x0200F030; DAR=0xE0FA8000; DSISR=0x42000000; LR=0x90007438; R1=0xBFFEE3D0; XCP=0x00000030 (0xC00 - Sp
The distnoted.crash.log refers to the following exception:
Exception: EXCBADACCESS (0x0001)
Codes: KERNPROTECTIONFAILURE (0x0002) at 0x00000006
(I can post this whole log if it would be helpful.)
Any thoughts on what might be causing this problem? I will continue to test the effects of changing various aspects of my configuration, but since I can only get the problem to occur once a day (after my computer has been asleep for a while), it might take me a few days or weeks to track the problem down through blind trial-and-error.
Thanks!
Dual 1 GHz G4 Mac OS X (10.3.9) 1.5 GB SDRAM, GeForce4 Ti 4600 LCD display, LaCie 1394 external drive

After a little experimentation, I've managed to narrow the problem down a little, but still haven't resolved it. My computer still crashes almost every time I wake it up after a long sleep (multiple hours). Things work fine for a few minutes, but then some aspects of the display start to get mangled (e.g. strange lines appearing, text becoming distorted, etc.), then some applications start crashing and the system hangs. Sometimes I get a kernel panic, but not always - but I always need to reboot to solve the problem.
The errors in the system log files differ from crash to crash, but the one thing that seems to be consistent is that I get a "Graphics chip error". Is this usually a hardware problem, or can it be due to a software problem? Sometimes this graphics chip error is the first error to occur, although sometimes an application will crash a few seconds before the graphics chip error is recorded in the system.log.
In my original post, I suggested that the problem might be due to an AppleScript that mounts an external drive. I have since determined that this is NOT the cause of the problem.
Any thoughts on what might be going on?
Here's the relevant part of the system log file from today's crash:
From /var/log/system.log:
Mar 31 13:52:18 nitrogen kernel: System Sleep
Mar 31 13:52:24 nitrogen kernel: System Wake
Mar 31 13:52:24 nitrogen kernel: Wake event 0020
Mar 31 13:52:24 nitrogen kernel: enableClockSpreading returned with 0
Mar 31 13:52:24 nitrogen kernel: AppleNMI unmask NMI
Mar 31 13:52:24 nitrogen kernel: Adaptec warning: Resetting SCSI bus.
Mar 31 13:52:24 nitrogen kernel: FWOHCI handleSelfIDInt - nodeID not valid (reset bus and retry 1)
Mar 31 13:52:24 nitrogen kernel: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Half Duplex
Mar 31 13:52:30 nitrogen mDNSResponder[159]: mDNSResponder Waking at 19764350
Mar 31 13:52:30 nitrogen mDNSResponder[159]: -1: DNSServiceRegister("Bill's Mostly Celtic Music", "daap.tcp.", "local.", 3689) failed: Client id -1
invalid (-65549)
Mar 31 13:52:30 nitrogen mDNSResponder[159]: -1: DNSServiceRegister("iTunesCtrl5DC89B66EC5DD60B", "dacp.tcp.", "local.", 3689) failed: Client id
-1 invalid (-65549)
Mar 31 13:52:30 nitrogen SymMissedTask - parent[240]: sleeptime recorded: Thu Mar 30 17:58:59 2006
Mar 31 13:52:30 nitrogen SymMissedTask - parent[240]: waketime is: Fri Mar 31 13:52:30 2006
Mar 31 13:52:50 nitrogen crontab[659]: (root) LIST (root)
Mar 31 13:52:50 nitrogen crontab[661]: (root) LIST (sage)
Mar 31 13:57:07 nitrogen kernel: Graphics chip error! Restarted.
Mar 31 13:57:24 nitrogen last message repeated 19 times
Mar 31 13:57:24 nitrogen crashdump: Started writing crash report to: /Library/Logs/CrashReporter/WindowServer.crash.log
Mar 31 13:57:24 nitrogen crashdump: Finished writing crash report to: /Library/Logs/CrashReporter/WindowServer.crash.log
Mar 31 13:57:25 nitrogen kernel: Graphics chip error! Restarted.
Mar 31 13:57:31 nitrogen last message repeated 42 times
Mar 31 14:00:00 nitrogen CRON[667]: (root) CMD ("/Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher" 1 "/Applications/Symantec Solutions/LiveUpdate.app/Contents/MacOS/LiveUpdate" " " "oapp" "aevt" "exAG" "-update LUdf -liveupdatequiet YES -liveupdateautoquit YES")
Mar 31 14:00:00 nitrogen /Library/Application Support/Symantec/Scheduler/SymSecondaryLaunch.app/Contents/schedLauncher[667]: launch for id = 1 event = oapp result = 0
aped[186]: Attach denied: super-user process, for LiveUpdate[674]
aped[186]: Attach denied: super-user process, for loginwindow[686]
aped[186]: Attach denied: super-user process, for SecurityAgent[690]
aped[186]: Attach denied: super-user process, for IRTool[710]
aped[186]: Attach denied: super-user process, for loginwindow[836]
aped[186]: Attach denied: super-user process, for SecurityAgent[839]
Mar 31 14:01:55 nitrogen sudo: sacks : TTY=ttyp1 ; PWD=/private/var/log ; USER=root ; COMMAND=/sbin/shutdown -r now
Mar 31 14:01:55 nitrogen shutdown: reboot by sacks:
Mar 31 14:01:57 nitrogen syslogd: exiting on signal 15
Mar 31 14:08:44 localhost syslogd: restart
Dual 1 GHz G4 Mac OS X (10.3.9) 1.5 GB SDRAM, GeForce4 Ti 4600 LCD display, LaCie 1394 external drive

Query problem with accumulated key figures

Hi BI Gurus!
I have a report problem that I hope you can help me with!
In my report I have 2 key figures. One for accumulated revenue previous year (KF1) and one for accumulated revenue current year (KF2). Both key figures should be presented in a graph in monthly buckets.
January figures from both the key figures shoule be presented in the same bucket. Therfore I can't use 0CALYEAR since we have the "year" information in there. Instead I'm using 0CALMONTH2 which is only two digits, 01 for January. That way I can map figures from both previous year and current year in the same bucket.
I need the figures to be accumulated and this is what I have problem with. When I run the report today in February 2010 it looks like this:
Month   KF1   KF2
01        10     15
02        10     20
03        15
04        10
05        20
06        10
07        10
08        15
09        15
10        20
11        20
12        10
This is how I would like the report to look like:
Month   KF1   KF2
01        10     15
02        20     35
03        35
04        45
05        65
06        75
07        85
08        100
09        115
10        135
11        155
12        165
I have tried to use the setting "accumulated" for the key figures but then I get this result:
Month   KF1   KF2
01        10     15
02        20     35
03        35     35
04        45     35
05        65     35
06        75     35
07        85     35
08        100   35
09        115   35
10        135   35
11        155   35
12        165   35
Since the KF2 is revenue for current year and I run the report in February I don't want any figures to be displayed in Mars...
I have tried to restrict the key figures by 0CALMONTH2 and 0CALYEAR. The KF1 is havein a restriction to only show values for 0CALYEAR - 1 and an interval for 0CALMONTH2 from JAN - DEC.
The KF2 is having a restriction to only show values in the interval "first month in year - current month" (in this example JAN - FEB) for 0CALMONTH2. And current year for 0CALYEAR.
Despite my restrictions for KF2 the numpers repeats itself for every month...
Any suggestion how I can resolve this?
Best regards
Anders Florin

Hi Khaled and thank you for trying to help me!
I agree with you and think the users should accept the report as it is. But they are claiming that top management will not accept this and they would really want this to be fixed the whay that they want. I have tried to push back on this and said that I'm not sure that it can be resoleved and that it could cost them a lot of money if I try.
But I will try to resolve it for them if I have spare time in the end of the project. I have not promised them anything but it would really be nice if I could fix it.
So when you say I need to use a structure and a calculated key figure. How should the calculated key figure and the structure be configured?
If I use a structure in the rows I guess I can't use same object in calc.key.figure right? Like if I use 0CALMONTH2 in the structure I'm not able to restrict the key figure with the same object? If that is correct I also have a ZMONTH object, different story why I have that... , that I can use in the same way as 0CALMONTH2. Or is this only a problem when I use "local" formulas within the query and not using a "global" calculated key figure? Cause I have only used the "loacal" formula calculated key figure in this report....
Br
Anders

Problem with MARS-55

Similar Messages

Maybe you are looking for