Problem with Mask don't cover at 100%

Hello I am from Rome and Carmine are a graph. Using Photoshop since version 2.5 and I have not stopped! I have a problem with layer masks. applying a simple gradient from black to white gradient, I realize that this is not coopre interamnete the image to be masked before the beginning of the side though to be covered. Only by enlarging the picture you notice the defect and only one additional mask on the group fades as it should be. Has it ever happened to you?
thanks 

as you can see in the image despite the mask would be perfect were the contours of the underlying image on the face of the child. Even if I was going to mask with a brush manually changed nothing.
the brush was the basic one and the oipacità to 100%. Only by grouping and masking with a new level disappeared!
Carmine

Similar Messages

  • Problem with Masked Buttons

    As it stands i have a button called Start, when this button is hovered over, three more buttons appear at its side (all masked)
    I'm having trouble actionscripting the buttons, ive tried putting the AS on the button
    on(release){
    gotoAndStop(2);
    seen as everything so far is done on the first frame on various layers i just need it to go to frame 2. but this doesn't work.
    the code that's on the start button is
    on(rollOver){
    Startmenu.play();
    Start menu is the invisible movieclip which has the masks and rollout buttons in.
    anyone got any ideas?

    start button does overlay the other buttons and it is on the main timeline. as is the movieclip which activated the 3 buttons when the start button is rolled over with the mouse.
    Date: Fri, 26 Mar 2010 08:39:42 -0600
    From: [email protected]
    To: [email protected]
    Subject: Problem with Masked Buttons
    does your start button overlay the other buttons?
    is your start button on the main timeline?
    is the movieclip with the 3 buttons on your main timeline?
    does that movieclip respond to the mouse (and thereby intercept mouse events intended for the buttons it contains)?
    >

  • Problems with masks after sending sequence back from SpeedGrade to Premiere (CC)

    Hello,
    I'm colour grading a clip in SpeedGrade  CC using the new direct link function. For the colour grading I used  different layers and also masks. Once I'm done I sent my sequence back  to Premiere Pro CC.
    I see, Premiere shows me exactly the colour correction I did in SpeedGrade except of one thing:
    The places where I used masks in SpeedGrade to light them for instance a bit up are now full of pixeled lines...
    I thought it's just a problem with the Preview, so I exported it. The pixeled lines stayed.
    Again: In SpeedGrade is everything fine, but when I'm sending the sequence back to Premiere there are these pixels.
    It's  really irritating because one day before it worked very good without  any problems and I was practically doing the same as now.
    Please help me, if you can! Thank You!

    Thank you but my masks are not animated. Premiere just can't reflect the colour correction I did for these masks. Here's an example...on the right edge I created a mask in SpeedGrade. And that's what Premiere is showing me when I send the sequence back from SpeedGrade to it:
    Does anybody know the solution?

  • Problem with masks, the shape don't select the right area.

    I was working all day with Premiere Pro and After Effects linked on and I snet another video fron Premiere to After and when I tried to create a mask it selcted an area different like in the image. I checked everything on the mask panel and It was all nomal, please help.@

    This usually happens because you have an effect on layer, that distorts the image. Some effects are applied after the masks like this. If you want the ability to use a mask ontop of the distortion, you could solve it be precomposing the layer.

  • Problems with masking and colours  in CC2014 - not in CC -  see screenshots!

    Does anyone know this problem? Since a few weeks masking and using colors in CC2014 doesn't seems to work that well anymore. When masking 100% the masked layer still shows. When I use a colour (with pen or mouse) PSD changes the colour a little bit.  I attach two screen prints to show you what I mean. Did the same in  PSD CC and there was no problem at all.

    When you measure in the Layer Mask what is the value? 
              I don't exactly get what you mean
              I see colour space at 40%
    Has the Density been changed in the Properties Panel?
              no, it is 100%, the feather is at 0 %
    When you open the CC 2014 file in CC does the issue persist?
              No, in CC the same file works fine

  • Problem with Bridge CS6 and zooming to 100%

    When I click on a file to zoom to 100% it zooms to 800%. I had the same problem in CS5 and fixed it by deleting the com.adobe.bridge.plist, but this does not work with CS6 and I don't even find the plist. I have a Mac with OS X 10.8.2. I found two plists, com.adobe.CSXS.3 and com.adobe.CSXS2Preferences but it didn't fix the problem deleting them.
    I use the zoom function alot and would be very grateful if someone could help me. I do not like the preview workspace with the little 100% window, I prefer zooming to 100% by clicking on the file.

    It does not work on a Mac, and they have only one set og +/-, at least my Macbook Pro has.
    That is a bit strange, it always has worked for that way on both my Mac Pro and my MacBook.
    I can use the scroll wheel on my mouse to enlarge the 100 % preview from loupe in preview window to 200, 400 and 800% but also the + and - keys from both my qwerty key board and the number pad of my extended keyboard for the same result.
    Hitting tab for full screen preview I don't even have to click, both aforementioned + and - keys set to 100%, 200, 400 and 800% as well my scroll wheel.
    All those methods work on both MacPro and MacBook.

  • Problem with masked SSID and network connect

    I recently purchased, and am discussing the HP Photosmart 6510 All in one product.
    I have read, and verified that your product does not permit connection to masked (non broadcast) SSID networks.
    I would appreciate you making a software change to support masked SSID networks. It seems unreasonable for me to be forced to lesson my security (it's hard to attack or connect if you don't know it is there) posture to enable wireless printing. The printer software allows you to enter an network SSID manually, so the only change needed is to enable connection to a masked SSID in the same way that a computer, or a gaming console (WII) does.
    Masking the SSID is a standard bit of functionality for network routers, so much so that every device (smart phones, gaming consoles and laptops) that I have connected all support the recognition and connection to a manually entered, masked SSID.
    Your software/firmware should support all standard functionality for wireless use if it is advertised as a wireless device.

    Let's try again. I wasn't asking for anyone's opinion regarding the efficacy of using a standard, provided bit of Wireless network functionality. It would be a mistake to assume that this is the only security method I employ, but masking simply makes it so that the other 3 networks on my block are the ones with a "welcome sign" out.
    ALL my other network supporting appliances support SSID masking.
    When will you change the software/firmware to support this standard feature (regardless of how you feel about it)?

  • Problem with mask

    I am currently editing a video of a play in which the cast dropped fake snow which looked great for the audience but, unfortunately, is not visible to the camera. I have added snow using Particle Playground's Cannon exploder which looks great but it should not be falling on the audience's heads ! I have added a mask to the snow layer but is not hiding the snow. I can't understand why not. I've tried leaving the condition at "add" and ticking the "inverted box and leaving the "inverted" box empty and changing the condition to subtract; but the snow is still visible inside the mask. Does anyone know what I'm doing wrong ? I have used masks before without any trouble...help ! btw I am using CS5 on Win 7.
    Regards,
    TL.

    Your screen shot has been reduced in size so much that I cannot read anything on this computer but I'll give this a shot. I think that you didn't move the snow effect into the pre-comp. If you reveal the Effects Control Panel do you still see Particle World?
    Here's what I would do.
    Duplicate your footage
    Add a black solid above the top copy of the footage
    Change the blend mode of the black solid to screen
    Draw and if necessary animate the mask so that it follows the audience movement
    Set the black solid as a track matte for the top copy of the footage
    Add a new solid to the comp and put it just above the bottom audience footage
    Apply your snow effect to that footage.
    Now you've got a layer of just the audience over a layer of snow effect over the original footage. Experiment with blend modes for the snow layer and you should be done.

  • Cs4, publishing to fp9 as2, problem with mask

    hello;
    I have a tf on the stage, with character embedding;
    the tf is masked;
    I have publish setting on flash player 9, AS2;
    when I play swf in flash player, the tf is not visible;
    if I publish to fp7, as2, no problem;
    any thoughts?
    thanks,
    Shannon

    Hi,
    Try exporting your file with the following settings to get a high quality GIF
    Dimensions   : Match movie
    Playback       : Animated
                        : Loop continuously
    Options         : Optimize colors
                        : Smooth
    Transparent   : Opaque
    Dither           : None
    Palette Type : Adaptive
    Max colors   : 99999
    Thanks!
    ps: please mark this post as Answered if this of any help to you

  • Problems with masks compiled on win2000.

    Hi all,
    if I compile masks on win2000, these are not displayed correctly in winnt. The patchset is the same on both systems (6.0.8.16.1 for forms builder and runtime). on win2000 the form is displayed correctly. But on winnt the bars (toolbar, navbar) are not visible. The second problem is the mask not open in full screen in forms runtime but as a window in a windows.
    best regards, steven

    I found the other DevZone discussion you reffered to with gesa.
    http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RNAME=ViewQuestion&HOID=50650000000800000056160000&ECategory=LabVIEW.LabVIEW+General
    You might try the suggestion that was made there. Since the error message is complaining about the 9th argument of the property node, we can try removing it; that is, delete the constant connected to the last input and shrink the property node so that there is no DTR input. Alternatively, you can change the flow control mode to . I think what is going on here is that in the original VI, the VI set the flow control to DTR/DSR (hardware flow control) and then asserted the DTR line so that it would be in the proper state for
    the communication to begin. This may have been allowed in an older version of VISA, but I think in the new VISA, if you use hardware control, it won't let you manually change the state of that line. The line state should be controlled automatically by the low level drivers. The result is the error you are seeing which is basically telling you that you do not currently have access to that line. If you use a flow control mode that does not use that line, you are allowed to assert it manually.

  • Memory upgrade on G560 and problems with removing the access cover

    Hi, this is my first post here - just bought myself a Lenovo G560 following the demise of my HP nx6325.
    The product I bought has only 2 GB RAM and so I bought an extra 2 GB chip from Crucial, which arrived here this morning.
    I've started to follow the manual's instructions to remove the system cover to gain access to the memory slots but, after removing the 2 screws in the middle of the cover and loosening the 5 screws around the edge, the cover seems most reluctant to pop off. It doesn't seem a very substantial piece of plastic and I'm worried about breaking it.
    I've tried gentle pressure under the little lip with a table knife but the cover doesn't seem to want to shift - it just bulges up at that point. I've checked and rechecked that I've removed the 2 screws in the centre and completely loosened the other 5......... Does it generally need some force to remove it, or am I doing something silly?
    Iain
    Iain
    Lenovo G560 - Windows 7 Home Premium x64
    Solved!
    Go to Solution.

    Thanks, Duck3 - I got the cover off, but I required more than just a sharp pull with my finger. - in fact, I couldn't any purchase on the access notch with a finger. I had to use a large screwdriver in the notch and gently apply increasing leverage, far more than I would have had the confidence to do without your advice.
    Anyway, now up to 4 GB and flying!
    Thanks again for your help.
    Iain
    Iain
    Lenovo G560 - Windows 7 Home Premium x64

  • HELP Problem with Website, don't know what to do

    I worked on a clients website a while back taking the frame
    borders off of her tables in her pages. Now she is saying that alot
    of her clients can't open up the site on their browsers. I did this
    changing of the borders in CS3. I have Firefox, Internet Explorer,
    Opera, Safari on Imac, I opened the pages on a PC and that worked,
    and two other Mac computers. This client is saying she is going to
    sue my boss.
    I did this work with her sitting right next to me, did I do
    something wrong or miss something, or how do I prove that I did
    what I was asked and the problems did not arise from that work.
    The site is elizabethtimanifauxart.com
    Please help.
    Thank you,

    I think it could be s DNS problem. Did she change her hosting
    cie if so then it is a DNS problem.
    Try and do this
    1: Get the right error message just saying "that alot of her
    clients can't open up the site on their browsers" is not enough
    2: start a command line and type
    nslookup www.elizabethtimanifauxart.com and mark the adress
    of the web site then repeat this step at the faulty customer to see
    if they get the same adress if not then there it is.
    3: If it is the same try emptying the cache on theses browser
    But I agreed with all the post it need more troubleshooting.
    PS and Yes it happens a lot that DNS are up updated
    adequatly. I have seen it many times.
    Frenchy ASP

  • Problem with unlock done by Apple

    Hi there,
    maybe somebody has seen this odd behavior as well:
    in November 2007 I bought an original iPhone from T-Mobile Germany which of course was net-locked. After the grace period of 2 years ended in November 2009 I asked Apple via T-Mobile customer service to unlock my iPhone in spring 2010. After a few weeks the miracle was done, and the phone did accept SIM-cards from other carriers. So far so good.
    Now comes the odd part, each time the phone reboots, it "forgets" that it is now factory-unlocked and again rejects non T-Mobile SIM-cards until it has been connected via iTunes to Apple. After this short "chat" between my iPhone and the Apple database non T-Mobile SIM-cards do work again. This can come quite unhandy if it happens during a vacation far away from my computer.
    Question is, is there a way for the iPhone to remember being unlocked over a reboot?
    TIA, Christian Burkert

    Some users have reported having to restore their phones to get the unlock to "stick". So, try restoring your phone from your most recent backup with a non T-Mobile sim installed. See if doing so fixes the issue.

  • Problem with update firmware car kit ck-100

    Nokia Car Kit Software Updater write "wizard stop with error" after try of downloads update.

    I notice the original post is marked as "Assumed Answered". I read that the original poster can confirm or deny this. If this is not answered (as I assume it's not) can you please mark it as such so that it gets the appropriate priority with Sony Support?
    ANNOUNCEMENT: 'Assumed Answered' explained - how us SE Answers members work
    Hide Details
    Some of you have noticed your threads get marked as 'assumed answered' even though there might not be a solution/answer provided. Keep reading if you want to know why.
    Me and my colleagues in the Sony Xperia support team get a list several times a day. This list is called "Email Alert for Unanswered Discussion Questions".
    As the name might hint, it contains a list with threads that are unanswered.
    All threads that are marked as a question when created ends up in this list if not already answered within 10 hours.
    In order for us to get a good overview of the Support Forum we click on 'Assumed Answered' as soon as we have posted a comment, even if it's not really answered. The creator of the thread can then either keep it that way, confirm or deny it.
    Either way, we automatically subscribe to all threads we post in, meaning we will get a notification for each new post in every single thread we attend so no post should be missed.
    We can also choose to subscribe manually to a thread after marking it as assumed answered (we do this if good answers have been provided by other users already).
    by Markus (07-Jun-2012)

  • Problem with JavaMail: don't work after I made it a jar

    Hi, My program works fine if I use -classpath to mail.jar and activation.jar but when I jar it i get:
    javax.mail.SendFailedException: Sending failed;
    nested exception is:
    class javax.mail.MessagingException: IOException while sending message;
    nested exception is:
    javax.activation.UnsupportedDataTypeException: no object DCH for MIME type text/plain; charset=us-ascii
    at javax.mail.Transport.send0(Transport.java:218)
    at javax.mail.Transport.send(Transport.java:80)
    please help

    What did you jar?
    The archives JavaMail consists of might contain some non-class extra information.
    unzip -l /mnt/ntfs/LANGS/java/extjars/mail.jar  |grep -v class
    Archive:  /mnt/ntfs/LANGS/java/extjars/mail.jar
      Length     Date   Time    Name
        26991  05-21-99 13:31   META-INF/MANIFEST.MF
            0  05-21-99 13:31   META-INF/
          286  05-21-99 13:31   META-INF/javamail.default.providers
           12  05-21-99 13:31   META-INF/javamail.default.address.map
         1107  05-21-99 13:31   META-INF/javamail.charset.map
          335  05-21-99 13:31   META-INF/mailcap

Maybe you are looking for