Problem with masks, the shape don't select the right area.
I was working all day with Premiere Pro and After Effects linked on and I snet another video fron Premiere to After and when I tried to create a mask it selcted an area different like in the image. I checked everything on the mask panel and It was all nomal, please help.@
This usually happens because you have an effect on layer, that distorts the image. Some effects are applied after the masks like this. If you want the ability to use a mask ontop of the distortion, you could solve it be precomposing the layer.
Similar Messages
-
hello,I have a problem with security questions.i don't remember the answer,please help me. i don't know how to manage this
You need to ask Apple to reset your security questions; ways of contacting them include phoning AppleCare and asking for the Account Security team, clicking here and picking a method for your country, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(104775) -
One of my contacts that I have used continuously in the past now turns red when selected and will not allow me to sent a message
Well you need to understand the behavior of h-reap or what it's called now, FlexConnect. In this mode, the clients are still remembers on the WLC until the session timer/idle timer expires. So switching between SSID's in h-reap will not be the same when switching when the AP's are in local mode.
Take a look at the client when connected in FlexConnect in the WLC GUI monitor tab. Thus will show you what ssid and vlan the client is on. Now switch to a different ssid and compare this. It's probably the same because the client has not timed out. Now go back to the other ssid and look again. Now on the WLC, remove or delete the client and then switch to the other ssid at the same time. Or switch SSID's and then remove the client. The client will join the new ssid and in the monitor tab, you should see the info.
There is no need to have clients have multiple SSID's unless your testing. Devices should only have one ssid profile configured to eliminate any connectivity issues from the device wanting to switch SSID's.
Sent from Cisco Technical Support iPhone App -
how can I fix this problem ? I cant close the safari with command Q anymore and the tabs don't have the exit botton that used to be on left corner !
Use cmnd+w to close the tab.
-
With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.
Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.
-
Hello!
I have some issues with Photoshop CC 2014. The tools "Background Eraser Tool" and "Blur" won't work correctly. When I’m holding down the left mouse button and trying to erase or blur some area, the tools don’t affect the whole area but just connect the start and the last points – like drawing a line. These troubles exist with mentioned tools only, other tools work correctly.
I’ve restored each tool separately, restored all the tools together, installed new drivers for tablet, re-installed Photoshop and even Windows. Nothing helped. These tools worked correctly earlier with the same adjustments, but one day something went wrong.
How can I make the tools work correctly?
Some information about my computer:
• Notebook Lenovo Y560
• Windows 7 Home Basic SP1 x64
• Intel Core i5 2.53 GHz
• 4Gb RAM
• ATI Mobility Radeon HD 5730 1Gb
• Tablet Wacom Bamboo CTL-470Hi,
I have a similar problem with the Background Eraser tool as well. It's the same both on my PC and on my laptop, both running Win 8.1 and PS CC2014. Would be great to have a solution for this. Did you managed to find a fix? -
Are there any other left eye dominant (or left handed) iPhone users that experience problems with the touch screen keyboard selecting the letter next to the one you'd intended..?
It's either hand right or left.
I have the same issue myself. Not sure if it's b/c my fingers are too big or if I'm really missed the letter on the keyboard. -
Every time I do all the steps to reset the questions the only problem I have is that I noticed in the link to reset them using an email the email in the link don't match the one I created my account with. Does anyone know how to fix this problem?
You won't be able to change your rescue email address until you can answer your questions, you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the HT5312 page that you posted from to upadte your rescue email address for potential future use -
I have a problem with Apple store when installing large application (example xCode): The system crashes.
It begun with 10.8 usualy with few tries it work but with 4.6 no succes.
Any suggestion?If you have more than one user account, you must be logged in as an administrator to carry out these instructions.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select the most recent panic log under System Diagnostic Reports. Post the entire contents — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports. -
Hello i have a problem with my MacBook Air they wiped out the operating system then installed windows 7 how do i re install the apple firmware please help
That is incorrect. You can install Windows on a Mac, any Mac, without having OS X installed on it.
To the OP you will need the original system reinstall USB thumb drive that came with your Mac Air if it is older than a Mid 2011 model or if it is newer than a Mid 2011 model you use the Online Internet recovery system.
If you don't have that original reinstall USB thumb drive you can order one from Apple for a small charge. Call Apple and ask to speak to someone Specifically to order a Replacement USB system reinstall thumb drive for your model year. You will need the serial number of that Air. It is etched into the bottom of the case.
Eric Ross wrote:
You can't run Windows on your Macbook Air without having Mac OS X installed with Boot Camp. So it should be an option to select the Mac OS X partition at startup when holding down the option key. Take a look at this link, http://support.apple.com/kb/HT4818 -
As it stands i have a button called Start, when this button is hovered over, three more buttons appear at its side (all masked)
I'm having trouble actionscripting the buttons, ive tried putting the AS on the button
on(release){
gotoAndStop(2);
seen as everything so far is done on the first frame on various layers i just need it to go to frame 2. but this doesn't work.
the code that's on the start button is
on(rollOver){
Startmenu.play();
Start menu is the invisible movieclip which has the masks and rollout buttons in.
anyone got any ideas?start button does overlay the other buttons and it is on the main timeline. as is the movieclip which activated the 3 buttons when the start button is rolled over with the mouse.
Date: Fri, 26 Mar 2010 08:39:42 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Masked Buttons
does your start button overlay the other buttons?
is your start button on the main timeline?
is the movieclip with the 3 buttons on your main timeline?
does that movieclip respond to the mouse (and thereby intercept mouse events intended for the buttons it contains)?
> -
Apple tv is giving me a meesage that says... There is a billing problem with a previous purchase. Go to the iTunes Store on your computer and click Purchase History to resolve problem. I have gone to my purchase history but can't seem to fix this issue.
You can contact the iTunes Store Customer Service department at no charge using the form on their Support page (select the category and subcategory closest to the issue you're reporting and you'll find an "Email Us" button) and explain your problem to them.
Copied from Varjak Paw in :https://discussions.apple.com/thread/2598671 -
I have LR 5. When I'm in the book module and select the option to "Send Book to Blurb" i get an error message saying "The file does not have a program associated with it for performing this action. Please install a program, or if one is already installed, create an association in the Default Programs control panel."
How do I fix this?Try the following user tip:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
The latest ios firmware update for the iPOD TOUCH (4.3.3.) has accidently removed the special speakers menu from the B&W Zeppelin Air.
How can this problem be reported to Apple to fix it ??????????????????I recently purchased an infiniti FX35 with the ipod integration. After visiting the local apple store "Genius Bar" and speaking on the phone with an "apple expert"; neither the genius bar or the apple expert heard of such an integration option in new cars being sold. They wanted more information from me about how it work rather than them assisting me with my problem.
Anyway, after alot of experimenting I got my ipod touch 2G running firmware 3.1 to work somewhat consistently.
Turn off wi-fi on the touch, power off then back on, go the ipod menu and select playlist. Attach the touch to the infiniti supplied cable through the dock connector. Select the ipod option from dash board. Playlist, songs, artists, etc will appear on the dash display and begin playing. -
Can anyone, help me please?
I have a problem with my iphone 4 Facetime, that since the new ios 7 system has been installed, I cannot use the FACETime? I don't know where to turn? I have contacted a retailer here in Isreal, and I've contacted the Cell come company and I've contacted the repair shop... each one pushes me off on someone else.
I cannot make any FACETIME calls.... anywhere................ helpHmm, I see from the Apple Support webpage it seems you cannot call them directly from Israel, that's not good.
Okay, so FaceTime stopped working once you upgraded to iOS 7 is that the situation? It doesn't work over either cellular or WiFi networks? I assume you have checked the Settings>FaceTime>FaceTime switch is on and that you have your correct Apple ID in there as well?
What happens when you launch the FaceTime app and attempt to make a FaceTime call, what message(s) do you get?
Maybe you are looking for
-
Won't boot anymore but in safe mode
My laptop won't boot anymore. I get a gray screen with a prohibition sign. Here's what I found so far: If I boot in the verbose mode it gets stuck on something like Looking for boot device. I zapped the PRAM. Didn't help. I can boot in safe mode. I u
-
How to update the record in a File (without closing Writer)?
Well i've got one issue: I want my program to record in a file updating any time i.e the records are added in append. But i want the record must be done in a file even if the Writer is not closed because I'd like to see the all logs of user and the m
-
Older dual processor 2 gig OS 10.4.11 and eratic fan behaveior
In the last day or two my Mac's fan has been kicking in and out in an erratic behavior. Now it's fine. But at least it's starting to do this a few times a day. My CPU temp goes as high as 163 F
-
I have an iMac purchased November 2013. When purchased it had Numbers already on. Now that App has disappeared. I last used the App in March 2014.
-
Jdev 10.1.3.4 migration issue
Dear all, I encountered the following problem. I performed the migration of my application from jdev 10.1.2. following the wizard. When I try to build the WEB module, the compiler is not able to find struts tags and <jsp:include ...>. I have a direct