Problem with Master Data Load

Dear Experts,
If somebody can help me by the following case, please give me some solution. Iu2019m working in a project BI 7.0 were needed to delete master data for an InfoObject material. The way that I took for this was through tcode u201CS14u201D. After that, I have tried to load again the master data, but the process was broken and the load done to half data.
This it is the error:
Second attempt to write record 'YY99993' to /BIC/PYYYY00006 failed
Message no. RSDMD218
Diagnosis
During the master data update, the master data tables are read to determine which records of the data package that was passed have to be inserted, updated, or modified. Some records are inserted in the master data table by a concurrently running request between reading the tables at the start of package processing and the actual record insertion at the end of package processing.
The master data update tries to overwrite the records inserted by the concurrently running process, but the database record modification returns an unexpected error.
Procedure
u2022     Check if the values of the master data record with the key specified in this message are updated correctly.
u2022     Run the RSRV master data test "Time Overlaps of Load Requests" and enter the current request to analyze which requests are running concurrently and may have affected the master data update process.
u2022     Re-schedule the master data load process to avoid such situations in future.
u2022     Read SAP note 668466 to get more information about master data update scheduling.
Other hand, the SID table in the master data product is empty.
Thanks for you well!
Luis

Dear Daya,
Thank for your help, but I was applied your suggesting. I sent to OSS with the following details:
We are on BI 7.0 (system ID DXX)
While loading Master Data for infoobject XXXX00001 (main characteristic in our system u2013 like material) we are facing the following error:
Yellow warning u201CSecond attempt to write record u20182.347.263u2019 to BIC/ XXXX00001 was successfulu201D
We are loading the Master data from data source ZD_BW_XXXXXXX (from APO system) through the DTP ZD_BW_XXXXX / XXX130 -> XXXX00001
The Master Data tables (S, P, X) are not updated properly.
The following reparing actions have been taken so far:
1.     Delete all related transactional and master data, by checking all relation (tcode SLG1 à RSDMD, MD_DEL)
2.     Follow instructions from OSS 632931 (tcode RSRV)
3.     Run report RSDMD_CHECKPRG_ALL from tcode SE38 (using both check and repair options).
After deleting all data, the previous tests were ok, but once we load new master data, the same problem appears again, and the report RSDMD_CHECKPRG_ALL gives the following error.
u201CCharacteristic XXXX00001: error fund during this test.u201D
The RSRV check for u201CCompare sizes of P and X and/or Q and Y tables for characteristic XXXX00001u201D is shown below:
Characteristic XXXX00001: Table /BIC/ PXXXX00001, /BIC/ XXXXX00001 are not consistent 351.196 derivation.
It seems that our problem is described in OSS 1143433 (SP13), even if we already are in SP16.
Could somebody please help us, and let us know how to solve the problem?
Thank for all,
Luis

Similar Messages

Problem with master data lookup in transformations

Hi,
We're experiencing a strange problem in the transformations for an Error Reporting scenario.
We've the SAP standard customer (0CUSTOMER) in DSO 2 which derives it's value from the navigational attribute of YCUSTNR (0CUSTOMER is the navigational attribute of YCUSTNR) in DSO1. But the problem here is that even when there is no entry for YCUSTNR, the 0CUSTOMER in DSO 2 returns a value.
Referential Integrity check is not employed for this scenario. Is it because of this reason that lack of master data is returning some value held in memory. I'm not sure whether it's an issue with the cache. Is there any work around for solving this problem other than the standard master data look up?
Any help in this issue would be appreciated and rewarded.
Thanks & Regards
Hari

Note 1031553 - Reading master data returns value that does not exist
will solve this problem.
Regards,
József.

Problem with the data loads

Hi,
We have a daily data load to ODS and then to the CUBE. Yesterday what happened is that the load to ODS has been taken place for 140 times and the data is not activated in the ODS. We have deleted the requests from the ODS and did the manual load to ODS and activated successfully. My question is that what causes this job to repeat such many number of times. The jobs log is as follows.
Job started
Step 001 started (program ZBIXX_FDA_START_PROCESS_CHAIN, variant ZCUST_DAILY, user ID BWBATCH)
Chain Is OK
Chain ZPC_FDA_CUSTDAILY_TRAN was removed from scheduling
Program RSPROCESS successfully scheduled as job BI_PROCESS_ABAP with ID 05302100
Program RSPROCESS successfully scheduled as job BI_PROCESS_DROPINDEX with ID 05302100
Program RSPROCESS successfully scheduled as job BI_PROCESS_INDEX with ID 05302100
Program RSPROCESS successfully scheduled as job BI_PROCESS_LOADING with ID 05302100
Program RSPROCESS successfully scheduled as job BI_PROCESS_LOADING with ID 05302101
Program RSPROCESS successfully scheduled as job BI_PROCESS_ODSACTIVAT with ID 05302100
Program RSPROCESS successfully scheduled as job BI_PROCESS_TRIGGER with ID 05302100
Chain ZPC_FDA_CUSTDAILY_TRAN Was Activated And Scheduled
Chain Is OK
The same log is repeated for 140 times in the log window.
Please Advise.

hi,
That is not a problem finally the jobs succes right.
and the thing is it is performance problem suppose first time it take error to study the issue and rectify the first instance it is the best way
Regards,
Lakshmi

Problem in master data loading in BI 7.0

Hi Experts,
I m loading master data in BI 7.0 server.
It is getting failed due to invalid record.
But when i load the same data in 3.5; it is successful.
Can anybody tell me what may be the problem..
Thanks in advance..
Regards,
Ashwin

Hi,
In BI 7.0 we first load data to PSA through Infopacage.Once data comes in PSA table we do transformation between the PSA table which is tied to the datasource and the data target.
Then we load data to the target through DTP.
May be there is some problem in the transformation.Check your mapping in the transformation.
Kindly update me regarding this.
Regards,
Debjani..

DTP problem on master data loading

Dear Experts
       When we loading 0Employee master data daily, sometime PSA data can not reflect to master table
     For example, data in PSA as following
10001    01/01/2008     01/31/2008    C1
10001    02/01/2008     08/31/2008    C1
10001    09/01/2008     12/31/9999    C2
     After DTP request success running, the data as following
10001    01/01/2008     01/31/2008    C1
10001    02/01/2008     08/31/2008    C1
10001    09/01/2008     12/31/9999    C1
    the C2 in PSA can not update to master table, this problem happened time to time, but it hardly find it until users' complain.
    When I manually deleted DTP request from Master attribute list and re-load from PSA to master table, the problem can be fixed.
    By the way, I have already set DTP Semantic Groups as Employee ID.
     Anyone can advice it, thanks in advance.
Regards
Jie

jie miao,
Previous master data already available in BW. every day load you need to load only changes. So last record is enough.
Eg:
Initial load on 01-01-2008
10001 01/01/2008 12/31/9999 C1
--> Data loaded on 2nd Jan and above data available in bw.
on 03-11-2008 you will get following records
10001 01/01/2008 11/02/2008 C1
10001 09/01/2008 12/31/9999 C2
Load these records on 03 Nov, so system updates accordingly.
Hope it Helps
Srini

Master Data Load - Number records not match

I am loading the 0PLANT table. In R3, it shows 966 records. After running the InfoPackage, there are 966 records in the PSA, none in error. But I get a message - Number of records requested does not match number transferred (packet 1).
This is a first use of a new source system to this BW. All master data loads give me the same error.
What is setup wrong?

Hello RoberT,
& How r u ?
For the same 0PLANT we load data on daily basis. Not only for this but also for more Master Data Objects. For some of them we used to get this message but not as an Error. On pressing the Update Tree (Refresh) it will change the status.
Anyway u got the records in the PSA so there is no problem with the data load. What signal u find in the Monitor ? Yellow or Red ? If yellow wait for some time, press Update Tree.
Best Regards....
Sankar Kumar
+91 98403 47141

Master Data loading in BPC 7.5 with prefix

Hi Gurus,
I need a help in master loading in BPC 7.5
Currently we are loading GL account with prefix of A and controlling area(COA1)
BI:0000600000
BPC: ACOA10000600000
I have maintained logic in the transformation file as below. Z001 represents the hierarchy Node.
ID=IF(ID(1:4)=STR(Z001) then STR(A)+ID;STR(A)0CO_AREAID)
Now client has came with new requirement as below
                           BI                   BPC
GL Acc               0000600000     A_600000
GL Node             Z00113            Z001_13
GL Node             Z00213            Z002_13
For the above requirement i have maintained the logic in the transformation file as below. when running master data load package i got the error as
Line 755 :Command failed ; end position is out of record index
ID=IF(ID(1:4)=STR(Z001) then STR(Z001_)+ID(5:12);STR(A_)+ID(5:12))
I need your help in modifying the logic in the transformation file for handling the above requirement.
And also for handling two hierarchy Z001 and Z002.
Thanks
Mahesh

Hi,
Your command should like:
ID=*IF(ID(1:4)=*STR(Z001) then *STR(Z001_)+ID(5:6);*STR(A_)+ID(5:10))
Hope this helps.

Master data load gives dump with exception CX_RSR_X_MESSAGE

Hi all,
I scheduled master data load for 0MATERIAL in our BI 7.0 Quality server. The load ended in dump with the exception CX_RSR_X_MESSAGE. The data has loaded into PSA( 37257 from 37257 records) but the technical status is red and has not updated the master data object.
I have seen note 615389 which talks about number range but the check is successful. The data load was successful in development server. This error has occured only in Quality.
We are on SP 12 in BI 7.0.
We are moving to production soon, so this is an urgent issue. I would appreciate if anyone responds soon. Points will be rewarded.
with regards,
Ashish

Hi,
The log of the dump is given below.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Information on where terminated
Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 78
of the (Include) program "LRRMSU13".
Source Code Extract
Line
SourceCde
48
*... Nachricht an den Message-Handler schicken
49
50
*... S-Meldung wenn kein Handler initialisiert
51
DATA: l_type TYPE smesg-msgty,
52
l_zeile TYPE rrx_mesg-zeile.
53
CALL FUNCTION 'MESSAGES_ACTIVE'
54
IMPORTING
55
zeile = l_zeile
56
EXCEPTIONS
57
not_active = 1.
58
IF sy-subrc NE 0.
59
l_type = 'S'.
60
ELSE.
61
l_type = 'W'.
62
ENDIF.
63
64
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
65
EXPORTING
66
i_class = 'BRAIN'
67
i_type = l_type
68
i_number = '299'
69
i_msgv1 = i_program
70
i_msgv2 = i_text.
71
ELSE.
72
DATA: l_text TYPE string,
73
l_repid TYPE syrepid.
74
75
l_repid = i_program.
76
l_text = i_text.
77
>>>>>
RAISE EXCEPTION TYPE cx_rsr_x_message
79
EXPORTING text = l_text
80
program = l_repid.
81
ENDIF.
82
83
ENDFUNCTION.
I went to SM21 and went through the system log. There was a log with the following text ORA-20000: Insufficient privileges#ORA-06512: at
"SYS.DBMS_STATS", line 2150#ORA-06512: at "SYS.DBMS_STATS.
I found a note 963760 for this error. After the changes said in this note were done I reloaded the data and it worked fine. Data load for another data source which gave dump now worked.
I am not sure if the note did the trick. So i am keeping this post open in case someone finds another solution or can confirm the solution which worked for me.
Thanks Oliver and Oscar, for replying.
regards,
Ashish

Cannot Load Text Without Cheking the (With Master Data option)

Hi,
Suppose I want to create a Characteristic Infoobject, that will have only <b>text</b> but no attributes or hierarchies.
For that in the Master data/texts tab of the Infoobject definition I checked the WITH TEXTS option but unchecked the WITH MASTER DATA option.
But when I was trying to load the text to the infoobject it was not giving an error. But when I checked the WITH MASTER DATA option I was able to load the text.
Can any one say why this happens, that though we do not want to load attributes, we have to check the with master data option for loading texts only.
Thanks in advance.

Can You tell us the error description..
You donot need to check the master data option..
Texts can be loaded without checking that option..
If you tell us the error message we would be able to help you identify the real cause..
Check for error log in SM37 or ST22
ashish

Transction data loading with master data as key?

Expert's,
I am trying to load the transction data with master data as a key.ZEMPID is my masterdata which having attributes ZEMPNAM and ZEMPDES .My transction data contains ZEMPID.ZEMPSAL and ZEMPAGE.I could create the master data and also load it successfully.But when I tried to create the infosource for trasctional data I should get all the attributes whatever I have given it for the ZEMPID.This I am not getting.Also While creating the cube if I select the infosource then in chraracterstic tab I am not getting my characterstics(master data+attribute).Please any one help me.

Hello Vasu
You are talkin abt transactional data and saying that not created cube/Ods ..
Let me put the things again
1. When you load master data you create infosource ( direct or indirect), All the attribute will be automatically comes in the infosource...when you define application component in master data tab in infoobject maintenance it is ready for data to be loaded. Search for application component in infosource..u will get the flow
2. When you load data in infocube only transactional data goes in it.....master data presents in master data tables...In infosource you define what are the field which need to be present in cube.......so you will be able to include only these objects which are present in cube dimensions + attribute which are defined navigational in the cube....
Master data attribute will never be pushed automatically....only componding object are pushed automatically.....
If you want to load attribute of ZEMPID then make them navigational in cube or add them in one of cubes dimension...
Hope i could make myself clear
Thanks
Tripple k

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

Error in Setting lock for Master Data Load

Hi Team,
I encounter the following error while uploading the Masterdata
"Lock NOT set for: Loading master data attributes
Attributes of characteristic 0BPARTNER are locked by terminated change run 465451241"
I Performed the following steps
1) Checked if any active jobs (change run jobs) running in the system. But no jobs running.
2) RSATTR->infoobject list-> no infoobject found
3)Tried after sometime ,but load continue to fail
Could anyone help to solve the problem
thanks
Bala

Hi Bala,
Check in SM12 if there are any locks exist with the change run number?
First check if there are any Master data loads running related to it?
Check in the Attribute change run screen if there are any change run steps are running?
Once after checking the above if no locks exist and no master data is running then check the below steps
1. Run RSA1 transaction
2. Tools -> Apply Hierarchy/Attibutes Change(or direct transaction RSATTR)... menu option
3. Click at "Monitor and Start terminated Change Runs" button (at the bottom of the screen)
4. Click "Reset Status" button at Run ID 465451241
NOTE: this is not recommended, to unlock the locks better to wait till the locks get relased.
If still the error message persists then we can use a FM in se37 in serious cases which was not recommended by SAP...
Use RSDDS_AGGR_MOD_CLOSE in se37 and execute--->there give ur failed change run no(465451241) beside I_CNSID and execute...
It releases all the locks by that change run....and continue with your further work/jobs...
Regards
KP

Error in Master data load because of ###

Hello,
I am getting an error in master data load.
The problem is ####### symbols are encountered in few records.
We have defined a formula to replace the ### with S in transfer structure.
But still it does not replace the #### symbols and gives error.
But when I insert the ####### symbols manually in PSA and try to load it is replaced with the formula definition and loads the data.
Suggestions required urgently
Thanks in advance
Ram

Hello srikanth,
Check the code below.
I have used it in the update rule to replace the #### symbol with A.
But when i check in debug mode it is not recognizing this symbol and sy-subrc ia always 4.
GV_STRING = COMM_STRUCTURE-/BIC/XXX
FIND '#' in R_STRING.
IF SY-SUBRC = 0.
REPLACE ALL OCCURRENCES OF '#' in R_STRING with 'A'.
ENDIF.
result value of the routine
RESULT = R_STRING
Thanks
Ram

0distr_chan initial master data load, text missing

Hey: I am trying to do an initial master data load for 0distr_chan on text. The load is not successful. In the monitor detailed error message, it has red alert for transfer rules missing message, update missing message.
0distr_chan attibute is OK.
I am also having problems when loading 0salesorg on text. It fails also.
Can anyone give me a clue?
Thanks!

Hi, thank you for your answer. I am new to this system. Please give me more guidance.
To check on datasource on R3, I use transaction RSA6, underneath the SD-IO master data, I found 0DISTR_CHAN_TEXT with green text icon on the right. Is this a valid way to verify that datasource for 0DISTR_CHAN_TEXT has been activated OK on R3? I am not sure if there is any way for me to check if any transfer rules for the datasource has been activated OK on R3.
thanks!

7.5 Hierarchy Master Data Load

Hi experts,
I am trying to load material masterdata with a hierarchy.
When I was loading my members I applied an attribute filter.
It loaded OK and loaded the hierarchy nodes ok.
Then as I went to load the hierarchy it gave me an error saying that "Hierarchy nodes include dimension members that do not exist"
When I checked through the log I could see that the "missing" members where all the ones that I had filtered out with the attribute filter.
But it seems the hierarchy load needs them?
Is there a way to apply the same filter in the hierarchy load? Or any other way around this?
Or can an attribute filter only be used if you are not loading hierarchies?
Thanks

Hi Joergen,
Thanks so much for your quick reply.
My problem is not that my nodes don't load. They do actually come through fine in my first master data load.
But then when I load the hierarchy BPC complains that the node I want to now create as parents has members that don't exist in BPC. These are basemembers, not nodes.
For example:
BW:
Parent A:
   Child A
   Child B
   Child C
BPC
I only load Child A and Child B because Child C does not meet the attribute filter
When I then load Parent A I get an error that Child C is missing?
Regardless I tried your method and it didn't work for me?
-First I loaded my members only with the attribute filter - no problem
-but then I put in a rubbish filter like you said and ticked to load the hierarchy nodes. When I choose the AND filter nothing is being loaded at all. when I choose the OR filter it loads everything (incl the members that I excluded in the first load)?
Did I understand that wrong?
Thanks
Sabine

Problem with Master Data Load

Similar Messages

Maybe you are looking for