Problem with master loads

Hi all,
While troubleshooting a load failure for a country, we were looking for the master files in UNIX for that country. But when we look in the directory for the country's master file in UNIX, we see the CSV file, but no files for the attributes. But when we go to the InfoPackage for the attr load, it has no failures, and if we look at the preview, it brings up a preview.
What I"m confused about is this: If the master file is loading correctly we should see the CSV file, and other files that are for the attributes right? What could be the problem.
Any thoughts on this?
Thanks
Suchitra

hi,
what do you mean by master file ?
in BW we call the files for attributes as master data file.
chk the content of the master data file you have mentioned. it will contain the attributes for the characteristics you were loading.
the data you were seeing in the preview will be available in the master file.
Ramesh

Similar Messages

Problems with Safari Loading Sites and Photos

For the past week (Feb. 2015) I've experience problems with Safari loading websites on my 2009 20" iMac desktop. Running version OSX Lion 10.7.3 4 GB. Intel Duo Core 2.66 GHz
Mac also will frequently not upload photos at websites like Yahoo News or Facebook. It does this throughout the day.
So, I downloaded Chrome, thinking it would be a better browser if Safari is not functioning. Chrome is just slightly better, and when it won't load a website I get the following error message from Chrome: DNS_PROBE_FINISHED_NO_INTERNET.
I'm debating taking the Mac to the Apple store for diagnosis or repair today, but if anyone else is experiencing similar problems, could you please offer some solutions as to what is going on.
Thank you.
AngieRK

Non-responsive DNS server or invalid DNS configuration can cause long delay before webpages load - Apple Support
Unless you have a good reason not to, you should update the OS to version 10.7.5.

Problem with delta load urgent!!

Hi,
I have a problem with delta load
We have an IP, which loads data from R/3 system daily, its a delta load to the ODS and it updates to the cube with the selection on Company Codes and 0FISCPER
we are in 3.5 system
For a couple of company codes A & B, the init was done for the period 07.2010 to 12.2099 and after tht the deltas are loaded from 07.2010 till 12.2099 and there's no pblm with tht
Now, there was some updation in R/3 system and the data was maintained for the company codes in A& B for the FISCPER 001.2010 to 006.2010, for which init wasnt maintained...
now how shall we need to load the init in this case? dnt ask me how the postings was done in R/3, but my pblm is purely related to the loading data in BW from R/3, as its very imp for the customer to see the data from 01.2010 to 12.2010 in reports, but the data was only available in reports from 07.2010 onwards
do i need to create another IP and maintain the init for 01.2010 to 06.2010? so tht this selection will automatically appear in the ODS delta loading infopackage
pls throw ur inputs ASAP
thank you

Hi Prince,
No need to maintain any Init for this data, It will be enough if you can load the data from jan 2010 to jun 2010 into your Info Cube.
Follow the below steps:
1)create full load IP for this data source.
2) give the selection as A and B company codes and 0FISCPER as 001.2010 to 006.2010
3) in menu bar, click on scheduler --> select full repair request
4) In the next screen check the check box and save
5) Now execute the IP, it will the data with out disturbing your daily delta.
follow the same procedure to load data till to your Info Cube.
Please revert if you have any questions
Regards,
Venkatesh

Problems with the load of Deliveries

Hi experts,
I am having some problems with the load of Deliveries from R/3 into BW.
In LIPS table of R/3, there are 41412 records. I delete the setup tables and realize the extraction with the transaction OLI8BW. After that I launch a simulation with RSA3 but only 6765 records are taken into account.
Apart of that, there is a range of deliveries documents (between 180000000 and 1084000000) that is not be taken into account.
Has someone have similar problems with the load of deliveries?
Thanks.

Matute,
you can try comparing those missing records with those already extracted. I found in my side that some records with document category of "H"(Returns) don't be extracted by 2lis_12_vcitm.
Jin Ming

Problems with pages loading

We are having a lot of problems with pages loading slowly or not at all. We get this message all the time...server not found...even on pages that have just recently been visited. We have this problem with Safari, Firefox, and Camino. I don't have Internet Explorer installed, but why should I just keep adding new browsers. My ISP assures me that the connection is fine. I have emptied caches, cookies, whatever I can find to empty. Did I empty too much? We use a Netgear router and a company called Digitron. Any suggestions?
Message was edited by: cynder13

Hi
Perhaps the easiest way to sort this out is to set up a separate Network Location for your connection:
-Location - set up a personal location by clicking on the drop down menu and selecting "add a location". Use a name familiar to you. Once established, select "apply".
-Next, click on the "Show" drop down menu and select Network Port Configurations. Only Airport ought to be checked. Move it to the top of the list (you can drag it). Select "apply".
-Back to the "Show" menu, select "Airport". Click on the TCP panel. There, enter 4.2.2.2 and 4.2.2.1 (separate lines) in the DNS servers box and select "apply". Also, you can always call your Internet Provider to find out if they have specific codes.
Creating a personal location, plus adding the DNS codes seems to speed things up. Otherwise, the "automatic" function has a tendency to "search" for available locations, hence creating the lag you are seeing.
Lastly, in the Finder, go to your Applications>Utilities folder and select "Terminal". Once the screen is open copy/paste lookupd -flushcache and press return. This clears out the DNS cache. Once done, quit Terminal.
If the above doesn't help, I suspect the Router is the problem. Perhaps you need to upgrade its firmware. Check at the Netgear site>Support.
Post back

Problem with Application Loader

Hi,
I'm trying to submit an iPhone application to iTunes using the Application Loader on a Mac Mini (OSX 10.5.8). After I enter my iTunes Connect login details I receive the following error response
*There is a problem with you login information*
Please click back and try again
An error occurred talking to the iTunes Store
The login details are correct, the device connects to the itunesconnect web site from Safari without issue.
Is anybody else experiencing a similar issue? Anybody have any ideas on how I might resolve this issue. It's really frustrating as this is now the only way to get an App into iTunes and the error message is not exactly giving me a lot to go on.

I got a message in an email saying I had the wrong binary code and therefore had to change it by downloading the application manager.
This was the email they sent me?
Some potential reasons that your binary is invalid: the binary icon doesn't meet our requirements, the payload directory is set at the wrong level in the .app wrapper, the bundle version has not been increased, and so on.
You will receive an email detailing the reason for your invalid binary. To clear the error, log in to iTunes Connect, locate your app, and click Ready to Upload Binary to reset your app's status to Waiting For Upload. This will allow you to redeliver your corrected binary through Application Loader.
Makes no sense to me either!

Problem with XML loading and xmlns

I'm having a problem with loading an XML file that was created by Filemaker. Filemaker will output an XML file using one of two different grammars. One outputs in a mostly standard form that I can use with one glitch. Flash CS4 AS3 seems to have a problem with the xmlns in one of the nodes.
Specifically:
<FMPDSORESULT xmlns="http://www.filemaker.com/fmpdsoresult">
If I remove the xmlns="http://www.filemaker.com/fmpdsoresult" the file loads properly and I can access the various fields with no problem. However, when I leave the xmlns=... in, it will trace out the XML properly but I can't access the fields using the code listed below. This is driving me crazy!
With the xmlns part in the XML file I get the following error when it tries to load the thumbnail files:
TypeError: Error #1010: A term is undefined and has no properties.
I need to have it so that the user can enter/edit data and simply output the XML file from Filemaker and then Flash will load up the unaltered XML file and show the info requested by the user. That is to say I could have the user open the XML file in a word processing application and have them delete the xmlns..., but that is rather cumbersome and not very user friendly.
I've tried every xml.ignore function I could find but it doesn't help. Hopefully someone out there can help
Thanks,
-Mark-
Partial XML:
XML From Filemaker Export:
<?xml version="1.0" encoding="UTF-8" ?>

<FMPDSORESULT xmlns="http://www.filemaker.com/fmpdsoresult">
<ERRORCODE>0</ERRORCODE>
<DATABASE>Sport.fp7</DATABASE>
<LAYOUT></LAYOUT>
<ROW MODID="1" RECORDID="1">
    <FirstName>Mark</FirstName>
    <LastName>Fowle</LastName>
    <Sport>Sailing</Sport>
    <Medal>None</Medal>
    <CourseOfStudy>Design</CourseOfStudy>
    <Year>1976-1978</Year>
    <HomeState>California</HomeState>
    <ImageName>93</ImageName>
</ROW>
</FMPDSORESULT>
AS3 Code:
import fl.containers.UILoader;
var aPhoto:Array=new Array(ldPhoto_0,ldPhoto_1,ldPhoto_2,ldPhoto_3,ldPhoto_4,ldPhoto_5);
var toSet:int=10;//time out set time
var toTime:int=toSet;
var photoPerPage:int=6;
var fromPos:int=photoPerPage;
var imgNum:Number;
//var subjectURL:URLRequest=new URLRequest("testData_FM8.xml");
var subjectURL:URLRequest=new URLRequest("Sports.xml");
var xmlLoader:URLLoader=new URLLoader(subjectURL);
xmlLoader.addEventListener(Event.COMPLETE, xmlLoaded);
var subjectXML:XML = new XML();
subjectXML.ignoreWhitespace=true;
subjectXML.ignoreComments=true;
subjectXML.ignoreProcessingInstructions=true;
function xmlLoaded(evt:Event):void {
    subjectXML=XML(xmlLoader.data);
    if (root.loaderInfo.bytesTotal==root.loaderInfo.bytesLoaded) {
        removeEventListener(Event.ENTER_FRAME, xmlLoaded);
        trace("XML Data File Loaded");
        trace(subjectXML);
    } else {
        trace("File not Found");
    imgNum=2;//subjectXML.ROW.length;
    trace(subjectXML);
    loadThumb(0);
function loadThumb(startPos:int):void {
    var count:Number=aPhoto.length;
    trace(subjectXML.DATABASE);
    for (var i=0; i<count; i++) {
    try{
        aPhoto[i].source="images/"+subjectXML.ROW[startPos+i].ImageName+"_main.jpg";
    }catch (e:Error){
        trace(e);
        aPhoto[i].mouseChildren=false;
        aPhoto[i].addEventListener(MouseEvent.MOUSE_DOWN, onThumbClick);
    trace("Current mem: " + System.totalMemory);
    ldAttract.visible=false;
function unloadThumb():void {
    var count:Number=aPhoto.length;
    for (var i=0; i<count; i++) {
        aPhoto[i].unload();
        aPhoto[i].removeEventListener(MouseEvent.MOUSE_DOWN, onThumbClick);
    trace("Current mem: " + System.totalMemory);
function onThumbClick(evt:MouseEvent) {
    var i:Number;
    //trace("Thumbnail Clicked " + evt.target.name);
    i=findPos(evt.target.name);
    ldLrgPhoto.source="images/"+subjectXML.ROW[i+fromPos].LOCAL_OBJECT_ID+"_main.jpg";
    ldLrgPhoto.visible=true;
    btnPrev.visible=false;
    btnNext.visible=false;
    gotoAndStop("showPhoto");
function findPos(thumb:String):Number {
    var pos:Number;
    var count:Number=aPhoto.length;
    for (var i:Number=0; i<count; i++) {
        if (thumb==aPhoto[i].name) {
            pos=i;
    return pos;

Hi,
I was trying to use xml namespaces, so in my application I receive an XML file from the server. The file has a namespace, so when I parse the file I need to specify the namespace:
I got the following piece of xml:
<ls:exchange xmlns:ls=".../tsw" xmlns:tm="http://kxa">
    <ls:projects>
         <tm:annotation id="" date="" action="getprojects" status="responseok"/>
    <ls:project id="" name="proj" description="..." owner="asss" release="2" />
        <ls:projectV id="" version="" creationdate="" modificationdate=""/ >
    </ls:project>
</ls:projects>
</ls:exchange>
and the following code
<mx:VBox label="WELCOME" verticalScrollPolicy="off" horizontalScrollPolicy="off">
      <mx:Tree id="tree" dataProvider="{srv.lastResult.project}" labelField="@name" width="300" height="100%" itemOpen="itemOpenEvt(event);" />
</mx:VBox>
So i want to display the content of the xml (project nodes”) in a tree view, but i don’t know how to includes the namespace"ls:" in the data provider “srv.lastResult.project”. can u help me it’s urgent.
sincerly
Celine

Problem with Master -Details forms in seperate pages

Hi ,
Below is the scenario:
I have Institution and a department tables where there is a foreign key relation between the tables. So now i have two entity objects for the 2 tables and 2 view objects(DepartmentView,InstitutionView) from the entity objects.
I also have a view link between them.I made a master-detail relation between them in the datamodel using the view link.So my appmodule now has getters for the department view,institution view and viewlink.
I now have a jsp page "createInstitution.jsp" which contains a form for the institution , i have a "next" button on the same jsp which calls a method in my appmodule class .This methods just inserts the record into the Institution view. In this method i am able to see what the user entered in the form by getting the viewrow record like the below code :
InstitutionViewRowImpl newInstitutionRow=(InstitutionViewRowImpl) getInstitutionView().first();
The next button navigates to the next page "listDepartments.jsp" which contains the list of departments that are added. This page has a button "Add Department" which takes to to the "addDepartment.jsp" page which shows a form for adding a department. This page also has a button which calls a method in app module class. The method just inserts the record into the view(DepartmentView)
Here when i say
DepartmentViewRowImpl newDepartmentRow=(DepartmentViewRowImpl ) getDepartmentView().first();
the newDepartmentRow is null.
Also on the addDepartment.jsp form , i had used a output field to see what the parent id was and interestingly the parent id is 75 which is first institution in the database. It should have been "-10" , a temporary id assigned.
Can someone please tell me what is the problem with my approach?

I don't understand why you are using a method on your button to insert the record into the table - An Oracle ADF Form will do the insert for you by default without any coding.
See the create pages in these tutorials:
http://www.oracle.com/technology/products/jdev/11/cuecards/adf_set_21/ccset21_ALL.html
http://www.oracle.com/technology/obe/obe11jdev/11/dev_ui/developuserinterface.html#t2s5
The method that you are calling just returns the first record in the rowset - I don't see how it has anything to do with actually inserting the data into the table.

Problem with thumbnails loading on LR Gallery.

Hi everyone.
I am having difficulty getting galleries to upload properly, and show the jpg files after running them through Lightroom.
I use the web gallery in LR, but then when I go to view a gallery online (it looks fine my the example given in LR), random photos are not uploaded.
I have tried uploading in LR, and also FileZilla.
The error I get in File Zilla is " 550 The process can not access the file because it is being used by another process.
Critical File Transfer Error."
The thumbnails that are being left out are COMPLETELY random! The number of the image left out varies from gallery to gallery.
I have called my host, as well as my internet provider, and there is no problem on their end.
I am working on horse show photos, and need to get these galleries uploaded correctly asap.
Can anyone help please??

Now I am able to load the applet on MAC OS X 10.4.11. This is due to network issue.
Now my problem with the applet functionality. My applet will display the map image. Applet contains the navigation arrow keys at the top left of my applet. These keys will be used to navigate through the map.
The problem is while user using the navigation buttons, the image got squash and stretch.
This is happened only on MAC OS X 10.4.11 and Its working fine on PC and MAC OS X 10.5.5.
Please anyone help in this regard. Thanks in advance.

Problem with SQL*Loader loading long description with carriage return

I'm trying to load new items into mtl_system_items_interface via a concurrent
program running the SQL*Loader. The load is erroring due to not finding a
delimeter - I'm guessing it's having problems with the long_description.
Here's my ctl file:
LOAD
INFILE 'create_prober_items.csv'
INTO TABLE MTL_SYSTEM_ITEMS_INTERFACE
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
(PROCESS_FLAG "TRIM(:PROCESS_FLAG)",
SET_PROCESS_ID "TRIM(:SET_PROCESS_ID)",
TRANSACTION_TYPE "TRIM(:TRANSACTION_TYPE)",
ORGANIZATION_ID "TRIM(:ORGANIZATION_ID)",
TEMPLATE_ID "TRIM(:TEMPLATE_ID)",
SEGMENT1 "TRIM(:SEGMENT1)",
SEGMENT2 "TRIM(:SEGMENT2)",
DESCRIPTION "TRIM(:DESCRIPTION)",
LONG_DESCRIPTION "TRIM(:LONG_DESCRIPTION)")
Here's a sample record from the csv file:
1,1,CREATE,0,546,03,B00-100289,PROBEHEAD PH100 COMPLETE/ VACUUM/COAX ,"- Linear
X axis, Y,Z pivots
- Movement range: X: 8mm, Y: 6mm, Z: 25mm
- Probe tip pressure adjustable contact
- Vacuum adapter
- With shielded arm
- Incl. separate miniature female HF plug
The long_description has to appear as:
- something
- something
It can't appear as:
-something-something
Here's the errors:
Record 1: Rejected - Error on table "INV"."MTL_SYSTEM_ITEMS_INTERFACE", column
LONG_DESCRIPTION.
Logical record ended - second enclosure character not present
Record 2: Rejected - Error on table "INV"."MTL_SYSTEM_ITEMS_INTERFACE", column
ORGANIZATION_ID.
Column not found before end of logical record (use TRAILING NULLCOLS)
I've asked for help on the Metalink forum and was advised to add trailing nullcols to the ctl so the ctl line now looks like:
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
I don't think this was right because now I'm getting:
Record 1: Rejected - Error on table "INV"."MTL_SYSTEM_ITEMS_INTERFACE", column LONG_DESCRIPTION.
Logical record ended - second enclosure character not present
Thanks for any help that may be offered.
-Tracy

LOAD
INFILE 'create_prober_items.csv'
CONTINUEIF LAST <> '"'
INTO TABLE MTL_SYSTEM_ITEMS_INTERFACE
FIELDS TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
(PROCESS_FLAG "TRIM(:PROCESS_FLAG)",
SET_PROCESS_ID "TRIM(:SET_PROCESS_ID)",
TRANSACTION_TYPE "TRIM(:TRANSACTION_TYPE)",
ORGANIZATION_ID "TRIM(:ORGANIZATION_ID)",
TEMPLATE_ID "TRIM(:TEMPLATE_ID)",
SEGMENT1 "TRIM(:SEGMENT1)",
SEGMENT2 "TRIM(:SEGMENT2)",
DESCRIPTION "TRIM(:DESCRIPTION)",
LONG_DESCRIPTION "REPLACE (TRIM(:LONG_DESCRIPTION), '-', CHR(10) || '-')")

Problem with iMacs loading web pages slowly after a power failure

We have 3 intel Macs (2 iMacs and a MB) on our network.
Today we had a power failure, and now we are having problems with both iMacs loading some web pages slowly (in Safari and Firefox both). I have shutdown and restarted both iMacs to no avail. As you will notice, I have not experienced any problems with my MB probably because the battery never allowed it to shut down completely.
Can you give me any indication of what the problem is or how I can go about troubleshooting this further?
Thank you in advance.

It does sound like it could be a WiFi issue. You can try rebooting your router and that might help. It just might your Internet connection or the router itself. If the router is bad, you can replace it. If its the Internet connection - you can only do what you ISP allows you to do.

Performance Problem with Query load

Hello,
after the upgrade to SPS 23, we have some problems with loading a Query. Before the Upgrade, the Query runs 1-3 minutes, and now more then 40 minutes.
Does anyone have an idea?
Regards
Marco

Hi,
Suggest executing the Query in RSRT transaction by choosing the option ' Execute+Debugger' to further analyze where exactly the query is taking time.
Make sure choosing the appropriate 'Query Display' (List/BEx Analyzer/ HTML) option before Executing the query in the Debugger mode since the display option also effect the query run time.
Hope this info helps!
Bala Koppuravuri

Problems with Master-Detail Form not retrieving Detail Rows

Portal 3.0.7.6.2 on NT
I am having problems with a Master-Detail Form not retrieving Detail Rows. Sometimes it retrieves all, sometimes about 50%, the majority of the time it's not retrieving any. If it never retrieved any I would suspect that the 'join' condition was wrong but that isn't the case. I didn't have this problem with a prior MD Form I created. I have tried re-creating the MD Form but I get the same problem.
Is anyone having similar problems/is this a know bug??
Any help or thoughts are appreciated.

I experienced performance problems. The simpiest MD form takes about 10 secs. to requery. I's not answer to your question, but there is more problems with this concept.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Michael Finch ([email protected]):
Portal 3.0.7.6.2 on NT
I am having problems with a Master-Detail Form not retrieving Detail Rows. Sometimes it retrieves all, sometimes about 50%, the majority of the time it's not retrieving any. If it never retrieved any I would suspect that the 'join' condition was wrong but that isn't the case. I didn't have this problem with a prior MD Form I created. I have tried re-creating the MD Form but I get the same problem.
Is anyone having similar problems/is this a know bug??
Any help or thoughts are appreciated.<HR></BLOCKQUOTE>
null

Problems with Photoshop - loading filters and brushes

I'm having problems with my plug ins in Photoshop, which also includes brush sets.
There are all present and correct in the usual area you save them with in the application folders.
But when I want to use them in Photoshop either they don't show, or I get an error message saying I don't have the privileges to load them.
If you can help in any way, it would be great as I am at a loss on how I can get them to work. These are fairly critical to completing certain work (graphics for distressed T Shirts)
and would like to get them up and working before a project flies in and I can't use them.
I was able to add a few plug ins by changing the permissions on the files. But this has not solved the problem for all & I am still unable to get "MACHINE WASH DELUXE" to work.
Any help or suggestions would be useful,
Thanks
Stones

Sorry, the brushsets appear to be fine but it is the plugins we still have issues with. 8BF. files, they are stored under photoshop CS4 in applications, this plug in were trying to get work "MACHINE WASH DELUXE" worked on this Mac & Photoshop version previously, but on a different user account (Now a domain user, used to be a administrator that connects into the domain) Interestingly though non of the plugins work for the scanner etc, although they are in the same location as they would of been for the previous user. Not much done in trouble shooting the issue, once the brushes started to appear because we corrected the permissions, we were stumped on what move to take next.
Thanks for you assistance
Stones

Problem with master card in app

problem with my master card if i doing any buying process the result your payment methods was declined please inter anther payment methods please how can i solve this problem .

Go here:
https://expresslane.apple.com/Issues.action
Ask for assistance, or call AppleCare.

Problem with master loads

Similar Messages

Maybe you are looking for