Problem with MATbleepA UJ-840D built in COMPAQ PRESARIO V2000

Hi. I am getting problems with the mat**bleep**a UJ-840D drive built in my laptop. I can watch DVD movies but cannot read, use or burn any CD discs.
I tried to upgrade the firmware version to solve the issue but the application does not work. The software is: FIRMWARE UPGRADE GCC4243N CDRW DRIVE (directly downloaded from HP web site). I select the file: "s5hp108.DLD" and when I hit the "FW Flashup" button, it brings error: "THIS PROGRAM CANNOT BE USED FOR THE SELECT DEVICE". (MAT**bleep**A UJ-840D - 1.02".
The currently drive installed is: Driver provider: Microsoft / Date: 01/07/2001 / Version: 5.1.2535.0
I think the CD/DVD writer drive must be ok because it works with DVD discs. I have tried with a lot of types and branch of CD discs, but not of them can be read.
If I can to be enabled to make an driver or firmware upgrade, or both, maybe it can be solved.
Thanks.

1-800-426-7378 the DVD should be a CRU so you won't have to send the laptop in
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

Similar Messages

T61p XP3 with Mat**bleep**a UJ-852 will not read CDs

Got From IBM Certified Used Equipment back in April, and just noticed I can't read CDs. Read alot of problems with the UJ-852 and DVDs, but not the problem I'm (my wife) is having. Machine Type 6457 AK7 with latest BIOS and Controller code. I have the Extended Warranty, but haven't found the right number to call. I can replace the hardware myself, and don't want to send Laptop back.
I sounds as if the Mat**bleep**a hardware has had problems for a while, and I should be able to get some help from Lenovo.
How come they put that drive in there in the first place, knowing it had problems... maybe I wouldn't notice... well, my wife noticed and her temperature is rising fast
Any suggestions??
Regards,
Billl

1-800-426-7378 the DVD should be a CRU so you won't have to send the laptop in
Thinkpad R61 7733-1GU
Thinkpad X61T 7762-54U
Thinkpad X60T 6363-4GU
Did a member help you today? Thank them with a Kudo!
If a post answers your question, please mark it as an "Accepted Solution"!
Regards,
GMAC

No bluray for my hp pavillon dv6700 with mat**bleep**a bd-cmb uj-120 ata

Hello
I have a problem with my hp pavillion dv6700, it can´t read or write bluray discs. It works well with CD and DVD. I believe I have a mat**bleep**a bd-cmb uj-120 ata. My OS is windows 7 ultimate. what can I do? do I need special drivers for W7? where can I get them?

Hi myujraf,
Welcome to the HP Community, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having a problem playing bluray discs. I will be happy to help you. What is your product number? There are several different models in the dv6700 series.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Hello there. I have a problem with my macbook pro. The built in wifi was broken. Is there anything I can do so I can still use the internet? Thank you.

Pleas help. Thanks.

There are any number of possibilies... you could have problems with runaway applications, causing your machine to overheat and setting the fans off, you could have bad fan sensors, etc.
Open Activity Monitor (Applications>Utilities) and see if you have any apps that may be hogging the CPU. Call back.
Clinton

Problem with bfilename(directory_name,file_name) function

Hi all,
I have a problem with this function. I have built and pl/sql program in order to send an email wich includes "pdf" file.
I have found that bfilename function works fine when you want to send a pdf file.
However, when I execute this query
SELECT bfilename('/usr/tmp', 'pdf_report.pdf') dato
FROM dual;
The result shows in the screen : /usr/tmp//pdf_report.pdf (NoExist)
I don't know why the path includes double "//".
Then, I wanted to open the file in this way
bfile_len := dbms_lob.getlength(bfile_handle);
pos := 1;
dbms_lob.open(bfile_handle,dbms_lob.lob_readonly);
an error occurs :
ORA-22285: non-existent directory or file for GETLENGTH operation.
I infere that the problem is "//" but I don't know why it happened.
Can I use another function in order to send a pdf file inside an email ? Or can I change a blob type column in order to replace "/" insted of "//" ?.
I appreciate your help.
Best Regards,
Mariano.-

Hi Damorgan,
I did what you told me but the error still appears.
I created my directory in the database. But when the program executed the line with the "fileopen sentence" the error appeared again.
I saw that the directory contained '//' instead of '/'. Can I use another function in order to send a pdf file inside an email ?
Thanks for your cooperation and patience.
Best Regards.
Mariano.-

Problem with Captivate KO

Hi,
I have a little problem with the Captivate KO. I built five
Captivate KO up to an Interaction-icon as HotSpots. The problem is,
that after finishing the Flash-movie there is only a white
presentation window. AW doesn't go back to the Display-icon, where
you can choose the HotSpots. The properties of the HotSpots are
"Perpetual", "Branch: Return" and "Erase: On Exit". I've tried on
"Erase: After Next Entry", it's the same result as "On Exit", both
are finishing with a white window. I've tried "Before Next Entry"
also, but the Flash doesn't play.
Does anyone know what I have to do, that AW goes back to the
Display-Icon?
Many thank's for any help!
hannah

If the hotspot branching is set to Return then they must be
perpetual.
Is there a reason that needs to be? Can you put the image on
the
interaction icon, make the hotspots not perpetual and set
them to
Continue - so when the KO is complete it loops back to the
interaction
icon and redisplays the image you want to show...
Do you have anything holding the flow at the KO while it
plays? If not,
then surely the flowline in hitting the KO then jumping right
back
(Returning) to where it came from...though it's then odd that
the
'Erase: On Exit' is not erasing the KO contents (maybe; I've
never used
that KO).
Trace your flowline and/or hit ctrl-b on occasion to see
where in the
flowline your course is at any given point - then maybe you
can
determine how and when to make the display reappear. My guess
is you'll
need an erase icon to erase the Flash sprite/control which
may be the
white area you see covering your display.
Erik
hannah m?ller wrote:
> Hi,
>
> I have a little problem with the Captivate KO. I built
five Captivate KO up to
> an Interaction-icon as HotSpots. The problem is, that
after finishing the
> Flash-movie there is only a white presentation window.
AW doesn't go back to
> the Display-icon, where you can choose the HotSpots. The
properties of the
> HotSpots are "Perpetual", "Branch: Return" and "Erase:
On Exit". I've tried on
> "Erase: After Next Entry", it's the same result as "On
Exit", both are
> finishing with a white window. I've tried "Before Next
Entry" also, but the
> Flash doesn't play.
> Does anyone know what I have to do, that AW goes back to
the Display-Icon?
> Many thank's for any help!
>
> hannah
>
Erik Lord
http://www.capemedia.net
Adobe Community Expert - Authorware
http://www.macromedia.com/support/forums/team_macromedia/
http://www.awaretips.net -
samples, tips, products, faqs, and links!
*Search the A'ware newsgroup archives*
http://groups.google.com/groups?q=macromedia.authorware

Problems with applets.

Hi to everybody.
I've got a problem with simple applets.
I've built several applets using Swing components (JApplet, JPanel, JButton, etc.)
In my browser, the background color of my applets does correctly appear.
But none of my components does !!!! No text fields, no buttons etc.
Can someone explain to me which could be the reason of that ?
Thank's.

I've just tried appletviewer. And I discovered that there is a problem while trying to acces to a jpeg file for my JBuutons and JLabel.
Appletviewer considers these files are on the client machine and refuses the acces.
But when I try my site, the server is my computer too ! So the jpegs are on the server side !
Furthermore, when I start my web page (that contains my applets), nothing does appear (no exception) in the java console...
How can I solve this problem (I'm newer with applets)?

Problems with Mic with Audigy 2 zs Platinum (with external b

<IMG height= alt="" src="http://forums.creative.com/i/p.gif" width= border=0>
I'm having problems with my mic settings when using built-in game comms such as Half Life Counterstrike source and Battlefield 2...
I have my mic connected to Line / Mic on my Audigy External Panel which works fine when using voice comms such as Teamspeak and Ventrillo but when i load up any of the mentioned games it changes my settings from Line / Mic to just Mic, there is another Mic connection to the soundcard at the back as opposed to the Line / Mic connection on the external Panel but it doesn't appear to be working. Any ideas ?

Nevermind after extensi've searching in forums using several keywords i found this.. http://forums.creative.com/creativel...id=5203#M29642
Bit disapointed I didn't get a reply from any Creative tech heads though, as it is the 2nd time I posted about this same problem when Counterstrike Source originally came out
So I have to concede that i will think again when purchasing a ?40 product from creative when there is a lack of basic support :smileyindifferent:

Compaq Presario CQ40-327TU Notebook PC Display problem

Hi,
My product is Compaq Presario CQ40-327TU Notebook PC originally with Windows XP edition. Recently I installed Windows 7 in my laptop from USB pen drive. Installation went fine, but it does not ask for C drive format. I installed in the C drive where Windows XP installed previously . After installation of my laptop working fine. Some times the screen goes blank (black) and come back after few minutes and in notification area it shows "Display driver Intel Graphics Accelerator Drivers for Windows 7 (R) stopped responding and has successfully recovered." like that I am getting a notification. In my system information, I checked it shows Windows 7 in OS. It happens only when I toggle to different windows or applications. I checked display adapters in device manager and it shows "Mobile Intel(R) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1)" . When I tried to update display adapter it showed already uptodate. Can I expect some solution for my problem here. Also after OS installed I found Windows.old folder in C drive. Can I removed that folder?
Thanks in advance.
Regards,
Venugopal

This is NOT official HP Customer Support and I, as most other persons on this forum, do not work for HP. This is a peer-to-peer user supported forum for HP consumer class products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Any reply from a HP employee represents their own opinion and not that of HP's.
It appears that your computer meets the minimum requirement for installing Windows 7. Please download and run the Windows 7 Upgrade Advisor to confirm this before attempting to install Windows 7.
Based on the specs for your Compaq Presario CQ40-327TU Notebook, this model shipped from the factory with Windows Vista installed. Here is the Compaq Presario CQ40-327TU Notebook PC Drivers page for your computer. HP has provided only Windows Vista drivers for your computer.
You should be using the current BIOS version before upgrading to Windows 7.
Please see the General Windows 7 Upgrade Guide for HP Laptops by CherylG for specific steps to be taken when installing Windows 7 on your computer. This guide will also direct you to the proper drivers needed for your computer to function completely under Windows 7. Please refer to "Part 1 - Models Level 1" for information specific to your model.
Please use Intel® Graphics Media Accelerator Driver, Windows 7*, Windows Vista* (exe) for a 32-bit OS and Intel® Graphics Media Accelerator Driver, Windows 7* 64, Windows Vista* 64 (exe) for a 64-bit OS. And YES, you can delete the "Windows.old" folder.
Please post the Windows Device Manager's "Hardware Ids" for any additional missing or unknown devices on your computer, as shown in the example below;
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Problem with built in Sound

I have this simple PE NEO-2 motherboard .. and i use the built in sound of the board... the problem i m having is that the sound suddenly disappears during the game.. or other music application... sometime it disappear after 2 min or some time after couple of hours...
So is my board faulty... or problem with drivers or bios update.??
Thanks

k.
well basiclly, when i had the same sound card on my 865PE Neo 2, it had the same problems. take battlefield Vietnam for example, the jet sounds would disappear after a while and come bak very very choppy, as did the weapon sounds. they actually reversed the sound. playing prom back to front.
The problem is the card it self. MSI take no pride what so ever in their sound.
the only way to fix, is either lower sample rate, which resluts in cracklier sound, updating drivers, which sometimes dont work, or just simply upgrading your sound card.
because of this problem i went out and baught my self a Creative Sound Blaster Audigy2 ZS Platinum pro.
frankly.
it i WELL worth the money.
if you want a budget card but still verry good, look for the Sound Blaster Live range. verry verry good.
Hope i am of some service to you all

Right, MacBook Pro 17" early 2011(Built March) and my new OCZ sata III 6G not working, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III.

My MacBook Pro 17" early 2011(built March) and my new OCZ sata III 6G are not working together, when is Apple going to admit there is a problem with the Intel's 6 Series Chipset. In System Information it says "Link Speed: 6 Gigabit" which is sata III and in my MacBook Pro it does not work.
Now MacBook Pro 17" early 2011 built May onward do not have this problem it was fixed in the Intel's 6 Series Chipset. (So there is a problem). Cam I have my MacBook Pro fixed please.

After biting the bullet and ordering more RAM, my computer now is working a ton better. So that must have been the main issue. With 8 GB RAM, I can now even run Parallels fluidly (better than my work PC!) where before simple things like logging in to my MBP after reboot could take forever.
The place I went to had several other people getting RAM upgrades at the same time as me, so between this and other comments I've seen in discussions here and elsewhere on the Internets, I take it to mean that either Apple should bump up the base RAM on its new machines, and/or stop charging so much for additional RAM.
I refused to believe a Pro machine bought with Lion installed would come with too little RAM for light to medium usage, but it was apparently the case. I'll mark this as a correct answer and hope some other poor soul will come across this thread and be helped by it.

Mat**bleep**a DVD problem

Hi,
I have a Toshiba equium psaaqe vista laptop it has a mat**bleep**su DVD drive. All of a sudden it stopped working, it wont read or write or recognize any CD DVD. I have researched the problem and the nearest I can get to a solution can be found here. http://support.microsoft.com/kb/929461/en-gb
Problem is I can't locate default data value DVD/CD-rom and the class data value cdrom? As this is alphabetical it seems its not on my system. And as the CD drive isn't’t working I can't reformat any ideas solutions much appreciated.
Cheers
haggisok

So no replies surprise surprise! I have trolled the internet and find lots of mat**bleep**a DVD problems, I also note many complaint's regarding Toshiba support. All I can say is I will never ever buy a Toshiba product again. My equium failed after I removed the tempro product support program, Toshiba sent me an email informing me my hard drive was over 50% full buy a new laptop, it then suggested a model costing over £1000. I concluded that the program was there to spy rather than help its customers. Toshiba got my money and ran off like a thief in the night!

Problems with built-in memory

Hi everyone!
I have a blackberry torch 9810, 7.1 bundle.
I have a problem with my built in memory. ever since I lost my memory stick, ii started using my built in memory since it's a 6.2 GB memory. so ii once plugged my bb into my laptop, and when unplugged, everything just disapeared! picture, music, recordings, everything. It wouldn't apear but ii know it's there because when ii plug into a laptop would say 2.3 GB used. Ii security wiped my phone once and it started working perfectly again. then the problem came back again after a while! How do fix this problem?

This only happens every-time you connect your blackberry to your laptop everything disappeared correct?

Having Problems with built in iSight

Hi,
I am having problems with the computer finding my built in iSight camera, I just updated to Mountain Lion and now no applications recognise it.
I have tried turning it off and on again, and switching to different users, but none can identify a connected camera.
Help?
Specs Here
Thanks
Frankie

Hi englishguru,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful for troubleshooting the camera on your MacBook:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Since you've determined that the behavior isn't user specific, try these steps:
3. Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
4. Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
Regards,
Jeremy

Problems with built-in iSight and iChat! Nothing works!!

Hello,
i have a problem with my iChat, iChat said that no camera is connected, but the built-in iSight works with Photobooth!
I read many Threads here but no solution works,
there is also an entry in the system profiler USB --> built-in iSight
I closed all other Aplications like Photobooth, iMovie and so on,
than i checked the activity monitor.
I changed the settings in iChat (bandwith) and Quicktime (bandwith)
I did a PRAM reset...nothing changed!
I did a SMC reset...also nothing changed!
The built-in iSight doesnt works with Skype, too!
Please help me!

Hey, I hope people aren't getting annoyed by my compulsive posting, but I think this solution needs to be spread, it doesn't get enough publicity:
the issue is that with 10.5.1, a certain quicktime component that acts as a USB controller for the iSight camera is given an expiry time (i.e., the file is given a feature similar to "trial periods"). This file is then deleted, and iSight ceases to function. All that need be done is to replace the component, by downloading it here:
http://techslaves.org/index.php?PHPSESSID=q8frk8vf81l0f8echu6mj0plk0&action=tpmo d;dl=item16
(disregard the version marking, it works for 10.5.2 in the very least)
Copy it to ~/System/Library/Quicktime, then reboot and it should work.

Problem with MAT**bleep**A UJ-840D built in COMPAQ PRESARIO V2000

Similar Messages

Maybe you are looking for

Problem with MATbleepA UJ-840D built in COMPAQ PRESARIO V2000