Problem with material master number range

Hi,
we have a problem with the material number range when stop the transaction of creation a material master data (MM01) the system has a jump of number range.
Example  -> while creating a new material master the system gives me a number preview (46) but if I stop the transanction without save the master data the system doesn't give me the number 46 in the next master data but give me the next number 8in this example 47).
It there a way for not have this jump of number range?
Thanks!
Gaetano

Hi Gaetano,
                    This ia a standard thing..even I have experienced it.
Regards,
Chiranjib

Similar Messages

  • Swtiching  Group in the material master number ranges

    Can any one please tell me how to switch the group for the material master numbers ranges..We are in the sandbox.We already in the midway .
    Thanks
    JJ

    go to the MMNR tcode
    hit change group
    keep cursor on the material type and go to
    Menu - Edit-select element
    it will turn in blue
    than select your group adn from ment edit-hit assign element group
    this will assign new group

  • Material Master Number range Problem

    Hi Experts,
    There is a Group 1 which has ROH assigned...then i changed the assignment,assigned ROH to a
    Group 2.
    Recently Material Type config was done in different R/3 system and transported to our  R/3 system.I did had a look in the TR it had only material type releavnt changes like Authorisation group and S.ref material type (T134 and T134T)
    But as a result ROH got reallocated to Group1 as initial.
    I had checked the log in MMNR the log shows me the assignment ROH to a Group 2 which i have done as the last change.
    No Clue what could have happened,If any one have some idea pls do let me know.
    Thanks in advance.
    Ratha

    Hi Dheeraj
    I did found a root cause of the problem.
    In Mat.type configuration there is number range code(NRC) 01,02,03 getting recorded.
    In our system NRC for ROH was 01,but in other R/3 system NRC for ROH was 02
    And when TR came from diff R/3 system our NRC was over written to 02.
    Regards
    Ratha

  • Material Master Number Range - Very Urgent

    Hi ,
    My client is having existing material codification as below :
    all material types for e.g. ROH, HALB, FERT will be starting their material code with 00 or 01 or 02 etc. sine the first two digits denotes the year , which will vary from material to material. The characters used will be from minimum 8 to maximum 14 - Alphanumeric.
    for e.g. my material code will be
    for ROH - 000040101F0101
    for FERT - 00801000101
    for HALB - 013000101C
    here for all materail type first 2 digit are for year and next will be prod. code , then assy , then sub assy , if forging applicable it will be F , if casting then - C
    How this can be mapped in SAP as one series for all material types, is it possible for system to identify the material type, what is advantage & disadvantage of the same.
    Pl. help
    Thanks & Regards,
    Vikas Mayekar.

    Hi
    Using Standard SAP for Material number ranges may not be able to map your requiremnts.
    But you can use the SAP enhancements available for the Number ranges determination & so onj...
    Please use the User exit in CMOD or SMOD
    You can use enhancement MGA00002 (for industry) or enhancement MGW00002 (for retail) for this.
    For more information, see the documentation for the following components assigned to these enhancements:
    Industry
    EXIT_SAPLMG02_001
    EXIT_SAPLMG02_002
    Retail
    EXIT_SAPLMG72_001
    With the exception of the transfer structure, this function is identical to customer enhancement MGA00002 for material number assignment for the material master for industry. Please see customer enhancement MGA00002 for more information and for sample coding.
    EXIT_SAPLMG72_002
    With the exception of the transfer structure, this function is identical to customer enhancement MGA00002 for material number assignment for the material master for industry. Please see customer enhancement MGA00002 for more information and for sample coding.
    EXIT_SAPLMGNK_003
    Please take help of ABAPer's for implementing the same
    Thanks & Regards
    Kishore

  • Material Master number range

    Hi Gurus,
    In the our system, following number ranges are set for material master,
    1 - 820000     to 899999     Current number 896492 (internal)
    2 - 900000     to 979999
    3 - 980000 to 999999     
    The number range 1 is going to complete.
    As the next numbers after 899999 is already in use for different material type, I will not be able to extend the material number range 1.
    What should I do,
    Should I create altogether new number range and assign to this material type?
    - Will system allow me to add another new number range along with existing number range or I need to remove the existing number range and attach new number range. (not yet tried. based on your feed back will try)
    - If system allow to add the new number range along with existing, will system understand after reaching last number, it will go to next number range and start from there.
    Kindly guide me.
    Thanks & Best Regards,
    Mohan

    Hi,
    then just delete the number range from the group and add a new one.
    Use the delete icon with the red line to delete the number range from the group.
    You have to change the status to 0 first
    To quote the SAP help
    1. Branch to number status maintenance.
    2. Set the number status to '0'.
    3. Branch to interval maintenance.
    4. Delete the interval.
    Then you can add a new interval
    Steev B

  • Material Master Number Range Issue

    Dear Experts,
    One of Our Client has 3 company codes and each company has seperate material master.
    Company 1: 0100000000 to  0399999999 (10 Characters)
    Company 2: 2010000000 to  9999999999 (10 Characters)
    Company 3: 10000000000 to 99999999999 (11 Characters)
    Is it possible to configure all the three number ranges in Same Client using different Material Type ?.
    According to client, the number ranges are not overlapping.
    Please suggest.
    -MSK

    Hi
    yes possible
    Company 3: 10000000000 to 99999999999 (11 Characters)
    want suggestion why not go with below
    30100000000   to 399999999999 you have 11 charetersr here it wont get overlap i think
    Regards
    kailas ugale

  • Problem with material master

    HI
    I am trying to change the material master profit centre but the system is giving me the error message
    You want to change the profit centre but there are still material stocks
    So Kindly help me with this
    This is little urgent

    u cannot change the mmr if there is any stock exist,any open orders (mm,sd,fi) exist.
    to chage the mmr u have to make the stock zero and also close all the open orders.
    solution is either create a new material.
    or u can create a dummy material codethen transfer the stock to the dummy material code-close all the open orders-change the profit centre in the original material code-then again transfer the stock from the dummy material code to the original material code and delete the dummy material code.
    regards,
    indranil

  • Problem with Material Master Data Upload using MM01?

    Dear Abapers,
    I done recording for uploading Material Master using MM01. I selected respective views at the time of recording. Then at the time of uploading it is not selecting the Quality view and Account1 view. Even I used 'P+' function code. it is working but not selecting the 2 views. Manually, if I select those 2 views uploading successfully.
    Could you please let me clear on this issue?
    Regards,
    Sekhar

    Hi Chandrasekar,
      Scrolling in the view-selecting screen wont be recorded during SHBD ( Recording ).So you need to first select Basic data1 rather than Accounting 1 or Quality management.Once you are in the basic data screen, fill the required description( if its unavailable ) and then choose the accounting 1 or quality tab.Do a fresh recording with the above approach, your issue should be solved.
    Regards,
    Kiran
    Edited by: Kiran NN on Feb 29, 2008 11:02 AM

  • Problem with Material Master upload

    Hi All,
    I want to know what the file MTVFP( Group Check Availability) filed gonna do in material master upload bapi "BAPI_MATERIAL_SAVEDATA". When i am trying to upload data i am getting the following error "The field MARC-MTVFP/BAPI_MARC-AVAILCHECK is defined as a required field; it does not contain an entry".
    Thanks

    Hello Ben ,
                    I am getting the same error , could you please let me know how you got it solved.
    Comradely ,
    K.Sibi

  • Material master number range flag

    Hi
    Is it possible to change materials number range flag from external to internal
    I need to upload materials to SAP from excel file. At the time of upload planning to use number range flag as external then after upload is completed planning to change to internal.
    Please suggest
    Thanks
    Raju

    Hi,
    Try to set the status of the number range from 0001-9999 to  "0"  through t-code XDN1 and save.
    Then go to intervals and change the assignment of numbner to internal.
    Hope this may help you............

  • How to assign customer master number ranges

    hi,
    sap gurus,
    can i know the transaction codes for
    all the number ranges which are available in std sap r/3.
    can any body help me on this
    regards,
    balaji.t
    09990019711

    Dear balaji
    Following are the number ranges which you can see in SNUM or SNRO.
    VN01     -     SD Number Range
    FBN1     -     FI Number range
    XDN1     -     Customer Naumber Range
    CO82     -     Production Order Number Range
    MMNR     -     Material Master Number Range
    Excise related Objects
    J_1IARE1         ARE1 Doc No object based on Series Group
    J_1IARE3         ARE3 Doc No object based on Series Group
    J_1IBOND        Excise Bonding: Bond number object
    J_1ICERT         Withholding Tax Certificates (India)
    J_1ICHLNNO    Internal number range for challans
    J_1ICONPLA    Consolidated PLA serial no. generation
    J_1IDEPINV     Excise Invoice Number for Depot Invoices
    J_1IEXCEXP    Export excise invoice number range
    J_1IEXCINV     Excise invoice number
    J_1IEXCLOC    Local excise invoice number range
    J_1IEXCTST    Excise invoice with intervals
    J_1IEXINEX     Excise invoice number for export
    J_1IINTNUM    Internally document number to be generated
    J_1IINTPR2     Despatch serial number
    J_1ILIC           Excise Bonding: License number object
    J_1IPLA2        PLA part II number range object
    J_1IRG1          RG1 Number range object
    J_1IRG1_T       No. Range for RG1 - Excise group / Material
    J_1IRG23A1     RG23A part 1 no. range object
    J_1IRG23A2     RG23A part II number range object
    J_1IRG23C1     RG23C part I number range object
    J_1IRG23C2     RG23C part II number range object
    J_1IRG23D       Folio Numbers for RG 23D
    thanks
    G. Lakshmipathi

  • Problem loading material master (IS Mill) data from ECC to BI

    Hi Gurus,
    We have a problem loading Material master data from ECC to BI 7.0 SP 18.
    The scenario is :
    The ECC is with IS Mill... due to which the Material field MATNR is of length 40 instead of standard 18 characters.
    That is data element MATNR has 18 chars and its output length is 40 chars.
    When is table MARA browsed using SE16, the material with more than 18 chars.... shows only first 18 characters and are ended with !.
    OMSL setting shows length as 40.
    When the extractor checker runs 0MATERIAL_TEXT or 0MATERIAL_ATTR it gives correct output ..... which is more than 18 characters... not ended with !
    Till here no problem.
    On BI side, after replication of the datasource, i checked data element MATNR ... but it has length as 18 chars and output length as 18 chars.
    OMSL setting cannot be set more than 18.
    Infopackage has pulled data till PSA successfully. I checked the PSA data .... here to the material with more than 18 chars is ended with !.
    When the data is further pushed to 0MATERIAL infoobject, it throws following error for all materials irrespetive of its length (example below):
    0MATERIAL : Data record 768 ('SIT_PL_B01L_10_01!E '): Version 'SIT_PL_B01L_10_01! ' is not valid
    0MATERIAL : Data record 165 ('RLIRS52 E '): Version 'RLIRS52 ' is not valid
    Diagnosis
         Data record 768 & with the key 'SIT_PL_B01L_10_01!E &' is invalid in value 'SIT_PL_B01L_10_01! &' of the attribute/characteristic 0MATERIAL.
    System Response
         The system has recognized that the value mentioned above is invalid, and has processed this general error message. A subsequent message may give  you more information on the error. This message refers to the same value, even though it does not state this explicitly.
    I did search for SAP note related to this... but could not find any.
    There is one SAP note (Note 960868) which mentions about this, but the correction was then shipped with BI SP 9.... we are running on SP 18.
    Requesting you all experts for help.
    Best Regards,
    Deepak

    Hi,
    follow bellow steps:
    1. you need to activate the Datasouce in BI side.
    Goto RSA1>  Datasource> Select Datasource> Double click> Check fileds and Activate.
    2. Replicate the Datasource into BI side.
    3. Check the RFC connections by useing SM59.
    Regards.

  • Material Document Number Ranges

    Hello Friends,
      We have a business requirement to differentiate the material document number ranges.  In our process, we have intercompany and third party scenarios and the requirement is that system has to determine different number series for third party goods issue and intercompany goods issue.  Currently as per standard, system deriving the unique number series for intercompany and third party goods issue since th event type is WL.
    Kindly provide your inputs on how we can differentiate the number ranges.
    Thanks in advance
    Best Regards,
    Goutham

    Hi,
    You could try to make it through the transaction code following  the process as below:
    First u need to create seperate document type in OMR4 or OBF4, then create a new number range in OMBT assign your new number range to new created document type then in T. code OMBA assign new created document type to the transaction code so whenever u will create document with this Transaction code u can get new number range.
    I hope this helps!
    Best Regards,
    Arminda Jack

  • Material doument number range

    Hi All
    in our SAP system we have 2 company codes but material doument number range is same for both the company codes . how to set it at company code specific and / or Plant specific?
    I have checked with T code OBH1 but it is related to FI doc types only. I need number range for material doument not for FI documents.
    As per requirement from client - it is needed for easy traceability and audit purpose.
    Is there user exit available for this ?
    I dont understand why SAP has not provided this as a standard . Because practically every company or even plant needs different number range , for easy traceability and if any audit will go on auditor will like to see documents in sequence .
    Hope u understand the issue .
    Bhushan
    Note : I have posted the similar query earlier but there was not much satisfactory replies. and some one has posted reply to check with T code OBH1 . But its not useful

    Hi,,
    GR  document Number ranges are Clent specific  and Yearly we need to maitain.
    As per the standard SAP  is concern we can't go for Company code specific.
    But in many big client like ABB  they have gone with a big development for this activities.
    so convince the Client for the feasibility and extra cost invoilvement in the Making this big development using ABAP, and some Userexits.
    We can't make any alternative solution using SAP  standard settings for this requirements
    with regards
    Shrinivas gangoor

  • No batch input problem with Vendor master Upload

    Hi All,
    I am getting a problem with Vendor Master upload conversion. We have'nt change the code and configuration but when i try to run the code today its giving an error for particular Account group. I run this code yesterday and its work fine with that particluar Account group. But i am getting an error when i run the code today. The error is as follows "No batch input data for screen SAPMF02K 0610".When i got through the code i have'nt find that screen number.
    Can anyone suggest how to resolve that problem.

    Double click on the session name in SM35 and click on the screens tab there you can find the screen number.
    process the same session in foreground mode and see if you are getting the same error.
    If so, the new screen number you got is due to some change in the settings some where, show the new screen to Your Functional guy and he can help you.
    There is one more chance where some data is missing in the flat file, just check it out.
    Reward points if usefull.
    Thanks ,
    Veeru.

Maybe you are looking for