Problem with material setup in MM

Hi Expert
Am a student right now learning SAP course, need advice to my problem
I have an error message which said " MRP type VM required forecast data to be maintain" ?
I am clueless what is the error about ?
In addition i have also entered under MRP 1 section a reorder point 7600 and a fixed lot size qty of 30700 and a flag FX under Lot Size!!! Does it make sense @@ I am totally lost and dont even know what am i entering!!!

Hi,
Check All document related configuration and Functional or user level.
http://www.docstoc.com/docs/11125515/SAP-MM-Customization-Document
http://www.docstoc.com/docs/11127900/SAP-MMFICOSDPP-Configuration
http://www.docstoc.com/docs/10940744/SAP-MMWM-Configuration-Doc
http://www.docstoc.com/docs/11307932/SAP-MM-Manual-Create-Purchase-Requistion
http://www.docstoc.com/docs/11424744/SAP-MM-INV-GR-for-Projects
Thanks
Abhi

Similar Messages

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)

Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external drive died. .Problems with Airport setup after buying Version 7 models, (older ones will not upgrade)
I moved house and have fibre network so 38mb/s - they all look ok on the utility, but its not till I saw the App version that they are not compatible as mac will not upgrade the version 6 ones, leaving me with 2 disjointed networks and 7 appliances, 4 of the old , 3 of the new.
my new house is expansive so i wanted the extended range and airplay in each room.
This is not told to customers, and utility doesnt show any issues.
I do not seem to get any range from either network now, - and I'm quite experienced with airport (6 yrs of setting up & using & extending)
Any advice ?
LJx
Message was edited by: LJLDN
Message was edited by: LJLDN

Sorry couldn't change the detonations to Airport and am new so cant delete!

Problem with Materialized Views after an export

Hi @ everybody,
At an Oracle 11g R2 (11.2.0.3.0) instance, all actual CPU's/SPU's are installed, on a Red Hat 6 Machine i have a problem with Materialized Views from a schema, which i have exportet from an old database machine on Oracle 10g (10.2.0.1.0) to the new machine.
I've exportet with the old exp and imported with imp, because i know, that i get some strange errors because of the materialized views when i'm using the new expdp and impdp tools.
At the old machine the materialized views are so programmed, that they get an update of data at a defined time like this:
START WITH TRUNC(SYSDATE) + 21/24
      NEXT SYSDATE+1
...But after the export this "update function" of the materialized view is not available. So i have deleted that views and recreated them with the START WITH parameters. So now they are running.
But why do i have this problem?
Is this "START WITH" somewhere written as a job or so in, for example, DBMS_SCHEDULER or something else? So i had forgotten to export these jobs or where is that defined?
Is this a bug?
Thanks for answers and help!
Best regards,
David

I can't remember the error of expdp/impdp. That is some days ago, i have to rebuild this.
I think in my scenario for the import i don't need the TABLE_EXISTS_ACTION, because by importing at the new server i've just createt the naked tablespace for the data and the users, not more. So he didn't has something to overwrite.
And i have to tell you: i'm just the dbA. The desining of the tables and materialized views is many years ago by installing the old server. I'm just to young in my company to know about the design of the instance and why it was designed so.
Anyway: my problem is, that after the import of the schemas to a new server the "START WITH" option in the materialized views is not there anymore and i just want to why so i can think about a solution for that and create it with the database designers of my company.
EDIT: And here are the SQL Statements for creating the Materialized Views:
First, at the OLD Server (Oracle 10g 10.2.0.1.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)And here the at the NEW Server (Oracle 11g R2 11.2.0.3.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS" ("CLIENT_ID", "ILN_USER", "EAN", "CODE", "ARTICLE_TEXT", "LANG_CODE", "LANR", "OLD_LANR", "ITEM_BY_NO", "UOM_UNIT", "PRICE_UOM", "PRICE", "CURRENCY", "PRICE_QTY", "SALES_UNIT", "START_DATE", "END_DATE", "UPDATED_AT")
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1
BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
USING ENFORCED CONSTRAINTS DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)The own differences i can see is at the "header". In the new one is the NOCOMPRESS LOGGING Option and in the first line the code has the columns diretcly defined.
But, i think, for my problem this line is determining:
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1And this line is the same at both server.
Edited by: David_Pasternak on 12.04.2013 00:06

Problem with material and document date in sales order

Hi All,
I am working in ECC 6.0 .I am facing problem with two fields when in enter in to sales order(tcode:va01)
1.A material comes automatically in line item.
2.Document date also comes as 27.03.2008 instead of todays date in each order i create.
I think its not related to configuration.I think its related to some modifications through exits or enhancement points.could someone suggest me a where to check and solve that.
Your's suggestion is appreciated.

Hi Sharad,
Check MV45AFZZ include in se38..It is a user exit for basic validation on sales...We may be able to find some code there (if screen data is predefined by code as mentioned)
Hope it helps
Regards
Byju

Problem with Material Confirmation (Availability Check)

Dear All,
There is a problem with the availability check. when i place order system does availability check and confirms the order. Now say for example i have 100qty of material - X and i created order for 50qty, system confirmed and then i went on creating orders for this , say i have created orders for it for 150qty, so system has confirmed 100 and 50 on future date.
Now when i try to do the delievry for the first order(50 qty), system gives me an error that "0" qty is available.
Can you please tell me what may be the reason for this.
Thanks,

You can also check in T-code Co09 of the availability. Best and easy one to read for me has been MD04 Transaction code.
What system does in Sales Order is that it plans the requirement taking into consideration Material availability and if material doesn't exist but sees that in a few days in the future material will be available so system confirms it. Note that physically the material may not even be present. You find out if you really have physical stock in the delivery. For example in the sales order in the future the system sees that a Purchase Order will take place so system confirms it. Even though physically you have not even done a goods receipt for that PO. So any Sales Order which has been created before holds that reservation. So if you make a PO goods receipt in the future all those sales order has taken up this stock even. So the new sales order you created may not even have physical stock present or available as back order exists.
If you delete Deliveries that have not had PGI done to them this will take the requirement out of the list of Deliveries you can see this in MMBE if you scroll to the right. You can also do reason for rejection for other old orders to take out reservation in MD04.
Good Luck
Ali Lozada

Problem with TMS setup in HA systems

Dear colleagues,
Our team have installed a new production environmnent to ECC in HA. We have a ASCS in cluster and two dialog instance in each server(local instance).
A virtual host GPPR3CIB and two instances in local, node GPPR301 and node GPPR302. This is an ECC 6.0 on Windows 2003 Server and SQL server 2005.
The architecture is as follows:
- GPPR301 node:
   - Virtual ASCS ASCS_0 (message server)
   - ABAP Primary Instance PPR301_1 (disp+work)
   - ERS (Enqueue replication server) instace ERS_10
- GPPR302 node:
   -ABAP Additional Instance PPR302_2 (disp+work)
   -Virtual Database Instance GPPR3DB
   -ERS (Enqueue replication server) Instance ERS_10
Once the installation is complete you need to apply SAP Note No. 943334 - "TMS setup in high availability systems" to set up high availability STMS. The problem is to distribute the configuration after running
the report " 'TMS_MGR_LOADBALANCING" described in SAP note.
The message indicates problems trying to run the command tp.exe. It has followed the note No. 1010990 and we have checked the folder permissions of the kernel but the problem persists.
Any information or help regarding this type of setup would be welcome.
Thanks.

Hi,
We have solved the problem with STMS. After several tests, the problem was in the parameter SAPLOCALHOSTFULL. This parameter must be assigned the hostname of the local system for each profile instance. If you've assigned the virtual host in the cluster generates the error in the distribution of the STMS.
Regards.

Problem with materialized views

I have a problem with the use of materialized views.
I make this procedure:
1: I create a table with the results of a query
2: Create a materialized view in that prebuilt table
Problem: When i execute the query after creating the materialized view i receive this error from oracle : ora-00903 table do not exists.
I get that error in 10% of the materielized views that i create that way, anyone can tell me what is the problem?

I'm using Oracle 9.2.0.5.0
query rewrite disabled

Problem with MATERIALIZED VIEW (snapshot)

Hi,
I've any problem with creating MATERIALIZED VIEW (snapshot)
My table is ROOMS:
SQL> DESC ROOMS
Name Null? Type
LS_ID VARCHAR2(32)
BL_ID NOT NULL VARCHAR2(32) PRIMARY KEY1
FL_ID NOT NULL VARCHAR2(4) PRIMARY KEY2
RM_ID NOT NULL VARCHAR2(8) PRIMARY KEY3
SITE_ID VARCHAR2(32)
SQL> SELECT COUNT(*)
2 FROM ROOMS;
COUNT(*)
203973
SQL> SELECT COUNT (TOT)
2 FROM (SELECT COUNT(*) TOT, LS_ID, SITE_ID
3 FROM ROOMS
4 GROUP BY LS_ID, SITE_ID);
COUNT(TOT)
11673
I'd like to create one MATERIALIZED VIEW that refresh every 30 seconds when I insert, update or delete on ROOMS table.
I tried this:
CREATE MATERIALIZED VIEW ROOMS_SNAP
BUILD IMMEDIATE
REFRESH complete
START WITH to_date(sysdate,'dd/mm/yyyy hh24:mi:ss')
NEXT sysdate + 30/86400
disable QUERY REWRITE
AS
SELECT LS_ID, SITE_ID
FROM ROOMS
GROUP BY LS_ID, SITE_ID
but when I insert, update or delete one record on ROOMS table, ROOMS_SNAP not refresh.
What I wrong?
How Can I write MATERIALIZED VIEW to maintain synchronization
between ROOMS_SNAP AND LS_ID, SITE_ID by ROOMS?
Thanks

Try this way:
SQL> SHOW PARAMETER JOB
NAME                                 TYPE        VALUE
job_queue_processes                  integer     0
SQL> ALTER SYSTEM SET JOB_QUEUE_PROCESSES=20 SCOPE=MEMORY;
SQL> create materialized view log on emp tablespace jam_ts
2 with rowid, primary key;
Materialized view log created.
SQL> create materialized view emp_mat
2 tablespace jam_ts
3 refresh fast start with sysdate
4 next sysdate + interval '15' second as
5 select * from emp where deptno=30;
Materialized view created.
SQL> update emp
2 set     ename=lower(ename)
3 where   deptno=30;
6 rows updated.
SQL> commit;
Commit complete.
---"After 15 seconds it will be refreshed automatically...."
SQL> select * from emp_mat;
EMPNO ENAME      JOB           MGR HIREDATE      SAL    COMM DEPTNO
   7499 allen      SALESMAN     7698 20-FEB-81    1600     300      30
   7521 ward       SALESMAN     7698 22-FEB-81    1250     500      30
   7654 martin     SALESMAN     7698 28-SEP-81    1250    1400      30
   7698 blake      MANAGER      7839 01-MAY-81    2850              30
   7844 turner     SALESMAN     7698 08-SEP-81    1500       0      30
   7900 james      CLERK        7698 03-DEC-81     950              30
6 rows selected.Message was edited by:
Jameel

Problem with J2SDK setup

Hi all,
I am experiencing problems with my J2SDK setup. I think my problem due to many previous versions of JDKs.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
I would be really grateful to you (and anyone else) for help with this problem.
Regards,
Vipul

Hi,
Thanks for getting back to me. I have altered my CLASSPATH and path. Unfortunately it is still not working. I have run java using the full path to the jdk and the jars are loaded in from the right place, but I still get the noclassdeffound error. I have removed all references to CLASSPATH and PATH. When I run with the verbose option (with no ref to the jdk in any variable), the jar files are loaded in from C\program files\java\j2re1.4.2_03! But there is no reference to this location in any variable.My j2sdk is installed in C:\j2sdk1.4.2_03.
Currently ,
CLASSPATH =".;C:\Program Files\eclipse\plugins\org.eclipse.swt.win32_2.1.1\ws\win32\swt.jar;C:\cygwin\usr\share\postgresql\java\postgresql.jar; C:\Program Files\Database Report Writers\DB Drivers\pg73jdbc.jar "
And PATH = " %SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\cygwin\bin;C:\Program Files\Common Files\Adaptec Shared\System;C:\MSSQL7\BINN;C:\tools\ant\apache-ant-1.5.3-1\bin;C:\Program Files\cvsnt;C:\tools\ant\apache-ant-1.5.3-1\bin;C:\tools\maven\maven-1.0-beta-11-SNAPSHOT\bin "
Please help.
Ciao,
Vipul

Problem with audio setup of IDT

Sorry, if this question isn't for this forum, but I need the solve of this problem
HP Pavilion dv6-6c53er.
Hello, it's me again.
My notebook is dv6-6c53er with two earphones outs and one microphone. So, I want to ask you a question. Can I set my earphones outs for different tasks or can I set them as independed outs. My English isn't so good, but that isn't so good, when i'm listening my music and when i get a message in skype - my music in earphones out is lost, but I hear Skype (soung of message), and music is playing on beats speakers, and past 2 seconds - again (in earphones - music, on speakers - nothing).
So, the problems are:
1) How I can set settings for each earphone out (to do it independed or to play different sounds)?
2) What Can I do with problem with Skype and outs?
3) Help me, please with settings in Traktor, because at Native Instruments forum I didn't receive resolve of my problem...
And problem with Traktor is:
I can't to set each earphone out for playing each deck in Traktor.
Help me, please with this problems!
Yours, Xardas007

I have the same problem. I was however able to install 9i. Then I was able to use the 9i Installer to install the 8.17 software. But I can not run the 8.17 Database Configuration Assistant. It will not start same as the 8.17 setup.exe.

Problem with keyboard setup.

Hi
I am having problem with my keyboard setup. When clicking the option key (alt) and a number key no symbols appear. Instead the computer gives away a beep. If I view the Keyboard viewer the symbols appear correct. I have created a new user and tried logged in as the new user. Then the symbols appear instead of the beep. What strange settings can I have made?
Thanks for your help.
/Erik

Yo
I seemed to have a folder in my users Library folder called KeyBindings and a file in there called DefaultKeyBinding.dict. When removing this everything was back to normal. So seems as though the file was steeling my option key mapping. Not good.
/E

Problem with Multiserver setup in LMS4.01

Hello,
we have a problem with a Multiserver setup in LMS4.01.The devices that should be manged in the slave server stay in unmanaged state.
Our goal configuation is:
Server-1 = DCR-Master
Managed devices = 4200
Apllications = RME, CM, IPM
Server-2 = DCR-Slave
Managed devices = 150 (this number is a subset of the 4200 devices on Server-1)
Applications = DFM + HUM
We created on the master-server a user-defined group with 150 critical devices and we configured a Master-Slave Setup as described in the documentation:
- Master Server - creating a peer user
- Slave Server - Creating a system identify user (with the same name/password as the peer user on the master server)
- Master + Slave Server - Creating certificate on slave + master server and import these certificates to each other
- Master Server - Enabling DCR-Master mode
- Slave Server - Enabling DCR-Slave mode
- Slave Server - Enabling at device allocation settings the functions <Inventory Mgmt>, <Fault Mgmt> and <Performance Mgmt> only
- Slave Server – Creating policy configuration for device allocation for the user-defined critical device group only
When I create the policy configuration on the slave server I can see all devices in the DCR and I can also see the user-defined group with the critical devices that I created on the master server. So there shouldn't be a problem with certifiactes or the peer/system identify users.
Now I would expect that I see the 150 imported devices in the slave server in a managed state. But when I check “Inventory> Device Administration> Manage Device State” in the slave server I see all 4200 devices in unmanaged state. And this looks wrong.
Any ideas about it?
Thanks + Regards
Hendrik

Hi Tomasz,
Nope. No solution from anyone. I had been fighting with it with several SAP Notes but not yet success. I opened a ticket with SAP but no solution yet.
I think it caused by our already existing SSL and integration with federated Portal.
I don't have any system with the same software to compare.
I followed all related notes by the book. My system was upgraded from BW 3.0B to NW04s SR1 SP Stack 10 then new Java add-in installation with usage BI-JAVA & EP SP Stack 10 .
I will conquer this some day- Wish me luck!
Thanks.
Mimosa

Problem with material master number range

Hi,
we have a problem with the material number range when stop the transaction of creation a material master data (MM01) the system has a jump of number range.
Example -> while creating a new material master the system gives me a number preview (46) but if I stop the transanction without save the master data the system doesn't give me the number 46 in the next master data but give me the next number 8in this example 47).
It there a way for not have this jump of number range?
Thanks!
Gaetano

Hi Gaetano,
This ia a standard thing..even I have experienced it.
Regards,
Chiranjib

Problems with email setup on my E72

I have problems with my email setup, the phone will not notify me when a new email arrives. I have had the unit in the shop, tried to get help form my service provider, have sent it back for repairs and it still will not work properly. The repair centre told me that it does have the latest software on it and said it should work fine. It,s a brilliant phone but this so frustrating. I would appreciate some help to get this sorted. Thank you, fuzzy2

Check homescreen applications-> e-mail notification.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Problems with Email Setup

I purchased a Blackberry Curve 9330 a few days ago, and am having problems with the email setup. I previously had an older model of the Curve, so have used Blackberry for email before. I'm going to Messagex ---> Options ---> Email Account Management and I get the following message:
"A new BlackBerry device has been detected. You must move email account(s) to resume email delivery to your BlackBerry device. Email delivery to your old device has been stopped."
It then lists the three email accounts I had on my previous Blackberry, and I click on "Move". It prompts me to enter my passwords for each email address, I do, and it says "Your password has been successfully validated." It shows all three email addressess. I return to my home screen, and the email icons are not there. I go back to Email Account Management, and it prompts me to "move" my email accounts and enter passwords all over again. I've done this at least 20 times at this point.
HELP!

Hi and Welcome to the Community!!
I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your wireless service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem with material setup in MM

Similar Messages

Maybe you are looking for