Problem with me flash bios not completed.

it gives me the message bios update not completed. please insert usb flash drive and reset system even though there is a inserted before disconnecting everything i managed to file not found therefore downloaded evib.binb but that didn't work
i am on the H61M-P25 (B3) motherboard i was wondering if any one could help me thanks.

yes it was the s3
should i just reformat and then only copy the files to the in the attached rar or should have other files say the original exe

Similar Messages

Problem with FX (CS6) "Could not complete your request due to a program error."

This only happened after I got the master collection. FX effects in Photoshop CS6 do not work, at all. Attempting to use any of them result in the above quoted "Could not complete your request due to a program error."
I've trashed the prefs, uninstalled/reinstalled, updated drivers, REFORMATTED MY HARD DRIVE, contacted customer support, and about every other troubleshoot short of sacraficing a goat. No cigar.
Error log gives me the following:
" ..\..\sources\UPattern.cpp : 1670 : REQUIRE failed"
Same error, every time.
Windows 7, 64x
16gb DDR3
AMD FX(tm)-4100 Quad-Core Processor [3.61 GHz]
AMD Radeon HD 7800 Series
Not running this 'Suitcase' thing. At a complete loss.

Removing the whole folder worked, which, is good enough for me. I think what happened was a finaggle with the install, as I already had PS installed when I overlayed the master collection on top of it, still doesn't explain it not working after the reformat, might have been linked to my backup/scratch disk in some fashion and broke it. I'm not quite sure how the problem persisted.
Don't install ps over ps, I guess ^^
Aha, it was Prefs.
Thank you! Greatly, been sitting on this problem for months now, no ammount of Googling would help. I can finally go back to work (that I've been sitting on this whole time).

Need some help - having problems with Dell Workstation BIOS not making all RAM usable

Hi,
I'm having problems upgrading the RAM in my T7400 workstation. I previously had 8 x 1 Gb modules and I'm now trying to use 8 x 2Gb (total 16 Gb). This fills up all 8 DIMM slots on the motherboard.
The replacement RAM is of the correct type, PC2-5300F DDR2, CL5, EEC Fully Buffered (same type as I had before). Each stick is also the same manufacturer (HP Micron), size, rank, timings etc. The problem is the BIOS won't recognise more than 8Gb as usable (it does detect all 8 sticks as it lists out all of the modules).
This is what I've tried so far:
Tested each module independently in DIMM slot 1 and it's recognised fine. (And I know all of the slots work, since I previously had 8 x 1Gb working ok).
I tried putting 8 Gb in DIMM slots 1-4, still only reporting 4 Gb usable (all modules detected).
I ran memory tests, everything checked out fine.
I reset the CMOS with the RTC jumper (suggested elsewhere on the forums).
I could find no bios option to remap memory.
Windows 7 Pro also shows 16Gb installed but only 8Gb usable (this is not an OS issue, since the BIOS is showing the same problem, before it even gets to loading Windows).
I haven't tried flashing the BIOS but I doubt this is the issue. I've been through the changelog of each revision after mine and it doesn't mention anything about fixes to memory detection (Also similar reports of my issue said upgrading the BIOS made no difference). I'd rather not mess things up when everything else runs smoothly and I'm very much out of warranty.
Of course, Dell won't help directly without trying to bill me for technical support.
Can anyone please suggest anything else I can try?
Thanks for reading.

Dimms that show half of the ram are High Density 4 rank and not compatible. Any ole Joes crab shack ram doesn't work. Only Specific vendors ram works. Buying ram based on a cheap price almost guarantees that its high density. High density modules have less ram chips on them and are therefore cheaper.
DDR2 PC2-5300 • CL=5 • Fully Buffered • ECC • DDR2-667 • 1.8V • 1024Meg x 72 •
HIGH Density Ram WILL NOT WORK.
http://www.crucial.com/usa/en/precision-workstation-t7400/CT3531857

Problem with text frame dropshadow not completely printing to pdf file.

Hi and thanks for your speedy replies!
I am editing a file that had altered corner text frames with a .25 inset and a drop shadow added, .05 stroke and paper swatch. When I deleted text everything shifted so I had to recreate the special frames on select pages. These new text frames are not showing the top and left sides of the frames when saved to pdf file. The right and bottom drop shadow are showing. What am I missing?
Cheers!

I am using the latest version in CC. I tried several exports directly from ID, PDF/X-3:2002, PDF/X-1a:2001 and the low res setting, all with no changes. None showed the left or top border on the frames in question.
So I was getting the first screen shot instead of the second which other similarly formatted frames showed. I checked every setting I could find and they were all the same. The problem just occurred after the point in the doc that I had made changes resulting in some pages being deleted and the page formatting being thrown off which I corrected with the appropriate saved page formats. But when I went to set up the frame dropshadow and accompanying stroke and swatches, the outline just would not show in the pdf although it appeared to be showing in ID.
I've since discovered a work around for the editing so no pages were deleted, but I need to figure out why this happened and what I am not seeing. Perhaps a setting to show the border? Or maybe it is some overall setting that I need to be looking for? Just weird, weird, weird...

I have a problem with adobe flash player

I have a problem with adobe flash player.
It is install but not running

Try a fresh install of Flash after completely uninstalling it using the application Adobe Flash Player Install Manager, in the Utilities folder. Then re-download and install from ww.adobe.com
If you are still having problems you could try installing Google Chrome as it has its own version of Flash built-in and doesn't require the separate installation of Flash.

Problems with Adobe Flash Professional CC (CS6 too) to save animated .gif file or perfect .swf file

Hello,
I have a problem with Adobe Flash Professional CC and CS6 to save animated .gif file. Here is very simple work with logo. But I can't save a perfect file swf or gif and it's so bad news for me. Logo .swf file save with bugs. Bugs just see then file insert in freeshop page. Here is just example test page, it let you see logo bugs - http://tagraseshop.graphicsrim.eu . Here is real page, but it's not my, it's freeshop with old logo and I have corect it - http://www.tagras.lt
Animated .gif file absoluted not saved in Flash CC. Just gif picture. And why? My os Windows 8.1 . Indeed I try to save on Adobe Flash Professional CS6. It's not save too...
Gif "animated" - https://mega.co.nz/#!D8pEVaRR!Gjg-nI4T-0vROV9xCa1XfXz4br1X9lpQfUR0nQNT LK4
Swf with bugs - https://mega.co.nz/#!jo5lSRyS!1x6GjWqYsf7n4KknUs6eF8EqZXEv9e8RsSpGd8h5 jGQ
Fla - flash document - https://mega.co.nz/#!C94nCDSS!7yKF9FIBvYtVC9r8kYiJ0l0xzUm_R2HwgoXks6iM zUA
Perfect animation speed is here - http://e-shoptagras.graphicsrim.eu
Who can help to me?
Any ideas?
Thanks for your help in advance!

Thanks, but I use publish/export settings with GPU hardware acceleration and flash version 11.2 (and 11.8) but nothing happening.
And why gif file is not all transparenty then I insert on lightblue background? It can't export good quality? Also I use Photoshop, After Effects, Adobe Edge Animate. And nothing happening. Egde animate file .oam is not good for old website navigation. It can't be inserted in freeshop site from navigation... I use logo file .oam just for example here - http://e-shoptagras.graphicsrim.eu
In reality I want swf file, but we don't find why logo flickering? here http://tagraseshop.graphicsrim.eu
All file's are transparenty - https://mega.co.nz/#!f8B2CD5R!J8uCJt9Sdq4Suz4HLhTHz8bzJcSWXMBIKcKZgkD3z8c
I need help! Please!

Have serious problem with my flash player

Hello,
i will start with my computer detail and program detail:
Os: Windows 7 64bit
Internet Explorer: ver. 8.0.7600.16385
Firefox: ver. 3.6.6 (Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.6) Gecko/20100625 Firefox/3.6.6)
Chrome: ver. 8.0.552.224
Flash player ver. 10,1,103,20
When i installed the windows 7 (date: 03.2010) and the other browsers i had used good with flash player and all working good, but after couple months i had problem with IE8 and with Firefox, The Problem is: couple sites i have streaming problem when i trying watch some clip or video (youtube working good) and i have problem with the flash player itself that I can not click on the buttons of Flash Player itself in a number of sites built on Flash, example: facebook - zynga poker aplication. BUT at Chrome browser is worked great with the streaming and with the clicking buttons... so i start using with the Chrome browser... But 3 weeks ago, My Chrome browser start do the same problem like the IE8 and firefox!!!
i tried many things: i Uninstall plash player and install again - nothing!!
i uninstall flash player and install flash player 9 and still - nothing!!
i tought its problem at OS system so install (upgrade) the windows 7 and still - nothing!!
someone can help me with that? I give up and i didnt Enjoy with Flash player like that
Regards,
Igal Meltser

=O====== M/10.1.53.38 2010-11-22+20-17-42.303 ========
0000 [I] 00000010 "C:\Users\jef\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\J82HM11E\flashplayer10_1_rc4_activex_050510[1].exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/10.0 2
0002 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0003 [W] 00001036 Software\Macromedia\FlashPlayer\SafeVersions/10.0 2
0004 [W] 00001037 SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Flash Player ActiveX/ 2
0005 [I] 00000013 C:\Windows\system32\Macromed\Flash\Flash10h.ocx
0006 [I] 00000015 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.exe
0007 [I] 00000016 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.dll
=X====== M/10.1.53.38 2010-11-22+20-17-49.120 ========
=O====== M/10.1.53.38 2010-11-22+20-22-28.472 ========
0000 [I] 00000010 "C:\Users\jef\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\3HEUMFML\flashplayer10_1_rc4_activex_050510[1].exe"
0001 [W] 00001036 Software\Macromedia\FlashPlayerActiveX/PlayerPath 2
0002 [I] 00000013 C:\Windows\system32\Macromed\Flash\Flash10h.ocx
0003 [I] 00000015 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.exe
0004 [I] 00000016 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.dll
=X====== M/10.1.53.38 2010-11-22+20-22-36.506 ========
=O====== M/10.1.102.64 2010-12-20+02-07-39.616 ========
0000 [I] 00000010 "C:\Users\jef\AppData\Local\Temp\6F56.dir\InstallFlashPlayer.exe" -iv 0
0001 [W] 00001015 C:\Windows\system32\Macromed\Flash\Flash10h.ocx 5
0002 [I] 00000018
0003 [W] 00001015 C:\Windows\system32\Macromed\Flash\Flash10h.ocx 5
0004 [W] 00001015 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.dll 5
0005 [W] 00001015 C:\Windows\system32\Macromed\Flash\FlashUtil10h_ActiveX.exe 5
0006 [I] 00000013 C:\Windows\system32\Macromed\Flash\Flash10l.ocx
0007 [I] 00000015 C:\Windows\system32\Macromed\Flash\FlashUtil10l_ActiveX.exe
0008 [I] 00000016 C:\Windows\system32\Macromed\Flash\FlashUtil10l_ActiveX.dll
=X====== M/10.1.102.64 2010-12-20+02-07-49.288 ========

Windows vista - IE 7 - problem with adobe flash player

last week I bought a notebook with MS vista home premium,
after some hours of
enthusiasm I had problems with adobe flash player.
Accessing to some sites I receiveed the requested to install
flash player, I did it and even if the installation seemed
ended fine I always got the pop up with the request to
install Flash player, as if it were not previously installed.
I did a boot after every installation.
I read your forum on:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1262552&enterthread=y
and I tried to follow some suggestions reported on it , like
uninstall the flash player using the
downloaded uninstall program from adobe site then I tried to
reinstall flash player “as administrator”
but always the installation appeared to end fine, the
programs was present into macromed flash directory
but I continue to receive the pop up to install flash player,
moreover some
images commonly shown when I visit the same sites from
another PC with XP are not shown on the new
pc with Vista, I think that also this problem could be
connected to flash player not well installed
One of these sites is www.rossoalice.it or youtube.
At this point, I think that the problem can be on the
registry but I don’t know what I can check.
I sow on the above adobe forum that mr. Darren J. McNally was
involved in this kind of problem,
every your suggestions will be very appreciated.

I got my computer about 6 months ago and i use
foxfire but i need explorer to work for my games but the adobe
flash player dont work i think if this cant be fixed vista i
probaly the gayest thing u can have on ur computer and adobe should
stop making flash players that dont work and just go do something
like sell stuffed animals at a carnival unless thats just to hard
for them and they wont do that right either. Grrrrrrrrrrr read this
and laugh or follow instructions or get back to. this be an angry
letter for sho. scuba steve out. and ahhhhhhh if u find solution
tell me asap or i will eat a cat for everyday u dont tell me im
gooing crazy about this omg
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaaaaaaaaaaaaaaaaaa

Having problems with adobe flash player..what do i do!! mouse isn't working.. just installed lion

having problems with adobe flash player mouse wont work with it?

Can you post a screenshot of such a request?
I believe that it is not Adobe or Flash Player doing this, but so far none of the other users who made similar complaints have posted a screenshot.

Problems with both Flash/Shockwave

I'm experiencing problems with both Flash and Shockwave
players. I've gone to the help pages for both of these players and
I've followed every suggestion they had in there for players not
playing even if they are installed. I have the ActiveX enabled in
Internet Properties, security software is not in anyway afilliated
with this problem, so that leaves me with being stumped and
fustrated. I hope that you guys can help me out if anyway possible.
Also, when I try reinstall Flash and Shockwave, both "successfully
installed" flash videos do not show up.
I will say this though, the posibility of an accidental
uninstallment of both plugins not too long ago might've resulted in
this problem.
Thanks.

quote:
Originally posted by:
errantfire
hey jmontgomery, follow the advice of greatsnipe, it really
does work. I had the exact same problem as you, couldnt get neither
flash nor shockwave to work, but the link grapesnipe listed really
does work.....for my flash anyway. Now if i could just get my
shockwave player to work..........
How weird! Its just vice-versa on how my problem get fixed. I
had problems with both my flash/shockwave plugin, now my shockwave
plugin is working but still, I'm having problems with my flash
plugin. Now what?

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?

I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple.

I have a problem with itunes account did not find a solution.

Good morning
I have a problem with itunes account did not find a solution.
The problem: your apple id has been Dasabld
I can not if download applications from the iTunes store
Hoping to help me solve the problem
Note my English is very weak
I want to re-activate the iTunes account
Thank you

To Contact iTunes Customer Service Use this Link...
Apple Support iTunes Store Contact

Hi,when ı work on photoshop suddenly my computer restart but i have saved my project before restart.and when ı want to open my psd , photoshop alert me with this messagge ;Could not complete your request because the file is not compatible this version of

hi,when ı work on photoshop suddenly my computer restart but i have saved my project before restart.and when ı want to open my psd , photoshop alert me with this messagge ;Could not complete your request because the file is not compatible this version of photoshop ..ı tried all versions but cold not open again.there was a very ımportant work for two days.can you help me please?

tworules wrote:
…photoshop need a recovery or auto save system.
tworules,
You haven't mentioned the exact version of Photoshop you are running. As the always helpful and knowledgeable JJMack told you, new versions of Photoshop do have auto save and recovery when enabled in your Photoshop Preferences.
However, no auto recovery and/or autosave is a match for a defective machine. As suggested by Mr. Cox, you should do a thorough inspection of all your hardware ASAP.

Problem with installing Flash Player 10 RC

Hello
I have some problem with installing Flash Player 10 RC. When
I try to do it I have error:
"Error opening file: C:\WINDOWS\system
32\Macromed\Flash\NPSWF32.dll". Why ?
Regards

Does it have any solution ?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?

By doing a Google search.

Problem with me flash bios not completed.

Similar Messages

Maybe you are looking for