Problem with Megaworks 510D Sub
I have the Megaworks 50D speakers and the problem is at a normal listening volume the subwoofer does not work and the sound has a slight static noise in it. The static noise accompanies the sound coming through the speakers. When there is no sound there is no static noise. When I turn the volume up or just the bass up, the subwoofer comes on and the static noise goes away. At the normal volume level, sometimes the sub will come on if its a bassy song or bassy sounds but its intermittent. If there is not much bass material then the sub does not work at all. When I say "come on" I don't mean that the sub's power light comes on in the back. That light is always on.
The sub has a separate level knob on it and when I adjust it the sub comes in and out randomly. I think this is a separate problem with the knob though.
Could these two problems really be the same problem (with the sub knob)?
Please help.Message Edited by Zertman on 01-24-2008 12:49 PM
You most likely have the same problem that i have. it isnt a problem with the sub. the bash amp or some part of it inside the sub box is starting to break or is broken. The sound will sound different coming through the sats and the sub, since the sub only plays lower frequencies..but im pretty sure it is the same squeal type noise that comes out of both... whichever channel has the loudest volume in the music/game/movie content will have the squealing sound.
try turning your sub up higher and the whole system volume up high.... all speakers should make the sound if played at high volume.. i fixed the problem by opening up the sub and poking around at the various capacitors and things... and it was fixed for two weeks. then it went bad again.
the speakers sound great when played quietly though! its still usable..just only at very low volume levels. oh well.. i bought a logitech z5500 system to replace it.. and just pluged the megaworks sats into it instead of the logitech speakers. seems to work ok..but i wish the z5500 had the "treble defeat" switch on it like the z50. i also wish the z5500 sub sounded as musical as the 50D sub. oh well at least it shakes the house down.
Similar Messages
-
Hi! Everyone, I have some problems with JOIN and Sub-query; Could you help me, Please?
Dear Sir/Madam
I'm a student who is interested in Oracle Database and
I have some problems with JOIN and Sub-query.
I hope so many of you could help me.
if i use JOIN without sub-query, may it be faster or not?
SELECT field1, field2 FROM tableA INNER JOIN tableB
if i use JOIN with sub-query, may it be faster or not?
SELECT field1,field2,field3 FROM tableA INNER JOIN (SELECT field1,field2 FROM tableB)
Thanks in advance!Hi,
fac30d8e-74d3-42aa-b643-e30a3780e00f wrote:
Dear Sir/Madam
I'm a student who is interested in Oracle Database and
I have some problems with JOIN and Sub-query.
I hope so many of you could help me.
if i use JOIN without sub-query, may it be faster or not?
SELECT field1, field2 FROM tableA INNER JOIN tableB
if i use JOIN with sub-query, may it be faster or not?
SELECT field1,field2,field3 FROM tableA INNER JOIN (SELECT field1,field2 FROM tableB)
Thanks in advance!
As the others have said, the execution plan will give you a better idea about which is faster.
If you're trying to see how using (or not using) a sub-query affects performance, make the rest of the queries as similar as possible. For example, include field3 in both queries, or ignore field3 in both queries.
In this particular case, I guess the optimizer would do the same thing either way, but that's just a guess. I can't see your execution plans.
In general, simpler code is faster, and better in other ways, too. In this case
tableB
is simpler than
(SELECT field1, field2 FROM tableB)
Why do you want a sub-query in this example? -
Problem with printing the sub totals
Hi,
I am having a problem with smart forms in printing the line items of invoice.
I need to print the sub total of each page and need to display the sub total in the footer, with the caption 'Balance C f/w'. It works fine in some cases.
In some cases, the sub total is getting printed wrongly, because its adding the amount of the next page's first line item also. I checked the form page by printing SFSY-PAGE along with the line item's text. It's observed that, the vlaue of SFSY-PAGE for the first line item's displayed in the second page is '1'. Due to this, the amount for this line item also is getting calculated with the sub total of the previous page.
Could you please suggest a solution for this problem?
Thanks & Regards,
JohnHi,
In smartforms, in the general attributes of the FIRST page the Mode for the page counter should be 'Initialize counter' and for the NEXT page it should be 'Increase counter'.
Please check this in your smartform.
Regards,
Ram -
I'm having this problem: When I connect my Live 5.1 card to the st analog input of the speakers (Megaworks 250D) I hear no sound from the left speaker, but on the 2nd analog input it works fine.
At the same time, no matter what analog input it is, the right speaker sounds weaker and distorted. But when, instead of the sound card, I use some other source and connect it with the same cable, the right speaker sounds good.
I tried to change the cable, but it didn't help.
I really have no idea what's going on, I'd appreciate any help.I bought mine 8 or 9 months ago and it worked fine until yesterday when I noticed this. I'd say something was wrong with the speakers, if there wasn't the weak bad sound coming from the Live 5.1 card (the old model, not this new 24-bit card) which is heard in right channel (I tested it with headphones too, the same thing happens), so I suspect that the sound card is having its own problems too and I'm gonna test everything again with another sound card.
However, when I tried using a different sound source I got the clean sound, only on right speaker with green input and on both speakers with white input. I couldn't really test the digital input, because with this Live 5.1 model and its drivers, digital output doesn't seem to work at all (I've heard the others couldn't make it work too, until they used some other drivers, but I didn't want to bother)... -
Problem with jsp in sub-directories
hello
I have uploaded my site on one the server in public_html.
And in public_html. there are 2 directories admin and segments.
segments directory contains setup.jsp file.
admin directory contains test.jsp file that includes file setup.jsp which is in segments.
but when i try to access test.jsp from browser , it gives me following err
org.apache.jasper.JasperException: /test.jsp(1,1) File "/segments/setup.jsp" not found
org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:40)
org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:407)
org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:88)
org.apache.jasper.compiler.Parser.processIncludeDirective(Parser.java:340)
org.apache.jasper.compiler.Parser.parseIncludeDirective(Parser.java:373)
org.apache.jasper.compiler.Parser.parseDirective(Parser.java:485)
org.apache.jasper.compiler.Parser.parseElements(Parser.java:1557)
org.apache.jasper.compiler.Parser.parse(Parser.java:127)
org.apache.jasper.compiler.ParserController.doParse(ParserController.java:212)
org.apache.jasper.compiler.ParserController.parse(ParserController.java:101)
org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:156)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:296)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:277)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:265)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:564)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:302)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:329)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:265)
javax.servlet.http.HttpServlet.service(HttpServlet.java:803) plz suggest me soln for this
i am stuck on this probs from last 4 days....
Regards
Sagar
Edited by: sagar_birari on 10 Jul, 2008 12:08 PMinlcude ur jsp like "../segments/setup.jsp" if u are givin the relative url..
shanuthis is not working.... :( -
Design Problem with GUI sub vi
Hello community,
in general, I would like to separate the GUI from the data, but I get
a problem with this design approach in LabView:
I often have sub VIs that are supposed to control something.
Therefore, these VIs consist of a control loop. A GUI window should
show the regulation process (showing how the tracking error is
hopefully approaching zero etc.). As I said, this GUI should be a
separate VI (separate from the control loop VI). Since the GUI has to
be updated on each sample, it is clear that the GUI VI should be
inside the control loop, and therefore, it should be a sub VI of the
control loop VI.
Now, the problem is that the control loop VI itsself is a sub VI
because the whole regulation is just a subsystem of the whole program
(The main VI doesn't have a GUI, but first starts a (GUI) input mask
for the same reason: separate the GUI from the rest).
But back to the GUI VI inside the control loop. I must check the 'Show
Front Panel When Called' option. But I can't check the 'Close
Afterwards if Originally Closed' option since the GUI VI would appear
and disappear in the control loop - according to the loop's sample
rate. However, if I don't check the 'Close Afterwards if Originally
Closed' option then the GUI VI will continue to show, even after the
control process is finished.
So in other words: I need the possiblity to close the GUI VI
programatically, after the control process is finished.
Any ideas?
Regards
JohannesHi tmh,
thanks for your answer
On Tue, 11 Nov 2003 10:26:32 -0600 (CST), tmh wrote:
>I think you're on the wrong track trying to put your 'GUI VI' inside
>your control loop. It might be a better design to have the control and
>GUI handled by separate loops and use an appropriate method to pass
>data between the two, e.g. a global variable to pass the setpoint from
>GUI to control...
I try to avoid globals. Now, suppose I had multiple unrelated control
loops. I had to suppose a global variable for each of these
subsystems. I already use globals for the GPIB device IDs. I wouldn't
like more.
>and a queue to pass readings from control to GUI. In
>fact, you could even split the GUI into two loops: one to read user
>input from the front pa
nel controls and one to display data returned
>by the control loop.
But if I split the GUI: How can I view them simultaneously? The user
must see input and output simultaneously, in one window.
>You may find it's more convenient to make the GUI
>the top-level VI and make the control loop a subVI of that (but
>outside the GUI loops).
Your approach sounds interesting. Is there a sample for this
architecture in the examples?
Anyway, I have to point out that I have several unrelated GUI windows
in my application. There is no notion of a main GUI in my application.
The control loop is just one feature of my application, so it doesn't
make sense to use the control GUI as the top-level VI. At application
startup a user input form is displayed (it also has some sort of menu
selection). But even this window can't be toplevel since it provides
an Option radio button (that shows and hides controls, accordingly) a
CONTINUE button, and a STOP button which implies that the input
form.vi must be
in a loop.
The problem is that I can't send messages to windows in LabView as I
am used to in Win32/VC++.
Johannes -
Problem with sub-screen actions on Cancel button
Hi all,
I have a problem with sub-screen.
I created a subscreen (screen sequence in MM01/MM02/MM03). When users leave this screen, I call POPUP_TO_CONFIRM to ask if they want to save the data.
1) My goal is: when they choose Cancel, no actions are performed and users will see the current screen. However, I cannot use command: SET SCREEN 0 or LEAVE TO SCREEN 0 because the system gives an error message:
*SET SCREEN not allowed in subscreens*.
2) How can we determine when the user leaves the screen? which value of SY-UCOMM will be used to check this?
Thanks in advance.for dis SET SCREEN is not required.
Consider d code given below as n eg:
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = 'SAVE'
text_question = 'SOME _QUS'
text_button_1 = 'YES'
text_button_2 = 'NO'
default_button = '2'
display_cancel_button = ' '
IMPORTING
answer = l_ans
EXCEPTIONS
text_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE e066.
ENDIF.
IF l_ans EQ '1'. " when yes is pressed
MODIFY db.
commit work.
leave program.
ELSEIF l_ans EQ '2'. "when no is pressed
leave program.
ELSE. " when cancel is pressed
ENDIF.
In above module when Yes is pressed it saves data den leave prog.
As no action is specified for cancel button it will remain on that screen only from which popup is called, in this way ur problem can be solved.
Reward properly. -
My home page opens fine but sub pages attempt to load from the local drive. Not a problem with IE.
Some time ago, while doing a bunch of things at once, FF asked me a question...not sure what it was as I was distracted by other things...I answered "yes" and since then my own website's subpages attempt to load from my C drive. This is not a problem with the homepage itself and it does not occur with other browsers. Driving me crazy and no one seems to know what is the problem...only with FireFox
http://www.questfundingservices.us is the home page which opens fine on any browser. But, in FF, any of my sub-pages attempts to open from the local drive. I believe this happens for other viewers of the site, but I am not 100% sure of that.
I never intentionally entered a <BASE local in the html and I don't think there is one, but you can check the source yourself.
This was never a problem until one day, while doing 50 things at once, I went to my website and FF popped up a question...Don't remember what it was and, in my haste I just said "yes", I think...and this problem has occurred ever since!!! -
Problem with UIX Pages in sub folders
I want to group my UIX pages into sub folders to maked definition of security constraints more convenient.
The New UIX Page wizard doesn't allow creation into a sub folder so I have created a blank page and then renamed it into a subfolder using File>>Rename menu option. However, now when I drag Data Control bindings onto the page they fail to bind properly. (No data appears when I run the page.)
Is there a fundamental problem with placing UIX pages into sub folders? Is it something I shouldn't do? Requiring a flat file structure seems an onerous restriction!
Thanks
Matthewyes. this is a known problem when you are running UIX pages and not struts dataactions.
For the model bindings to work, you currently have to keep
all your uix pages in the top level directory.
However, if you use the struts-pageflow with UIX pages, then you can keep you UIX pages where ever you want. -
Firefox 6.0.2 keeps on crashing, problems with ajax calls
Hi,
I am using the jquery form plugin to make ajax calls on my sites, when i invoke the plugin and have Firebug open I get this message:
Could not convert JavaScript argument arg 0 [nsISupports.QueryInterface]
[Break On This Error] callback.data = aElem....getComputedStyle(callback.data, '');
rfhelper32.js
Firebug also tells me that it's limit has been reached 1571 entries shown.
Can someone tell me why this is happening; is there a problem with Firefox that will be fixed. It's not happening in IE9
Here is the information from a recent crash report (which may or not be related to the above problem!)
AdapterDeviceID: 0a66
AdapterVendorID: 10de
Add-ons: [email protected]:3.0.4,{6AC85730-7D0F-4de0-B3FA-21142DD85326}:2.5.5,{8f8fe09b-0bd3-4470-bc1b-8cad42b8203a}:0.17,{e968fc70-8f95-4ab9-9e79-304de2a71ee1}:0.7.3,{f36c6cd1-da73-491d-b290-8fc9115bfa55}:2.2.0,{BBDA0591-3099-440a-AA10-41764D9DB4DB}:3.1,[email protected]:1.8.2,{2D3F3651-74B9-4795-BDEC-6DA2F431CB62}:2011.7.1.3,{972ce4c6-7e08-4474-a285-3208198ce6fd}:6.0.2
AvailableVirtualMemory: 174600192
BuildID: 20110902133214
CrashTime: 1316093326
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1315406279
Notes: AdapterVendorID: 10de, AdapterDeviceID: 0a66, AdapterDriverVersion: 8.16.11.9104
D3D10 Layers? D3D10 Layers-
D3D9 Layers? D3D9 Layers-
WebGL? WebGL-
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 160793
StartupTime: 1316067225
SystemMemoryUsePercentage: 86
Theme: classic/1.0
Throttleable: 1
TotalVirtualMemory: 2147352576
URL: https://s-static.ak.fbcdn.net/connect/xd_proxy.php?version=3#cb=f1ae6be54ac01b4&origin=https%3A%2F%2Fwww.paypal-business.co.uk%2Ffd558408b2cb6c&relation=parent.parent&transport=postmessage&type=resize&height=20&ackData[id]=1&width=250
Vendor: Mozilla
Version: 6.0.2
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 :
MSAFD Tcpip [UDP/IP] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IP] : 2 : 3 :
MSAFD Tcpip [TCP/IPv6] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IPv6] : 2 : 2 :
MSAFD Tcpip [RAW/IPv6] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
RSVP TCPv6 Service Provider : 2 : 1 :
RSVP TCP Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP UDPv6 Service Provider : 2 : 2 :
RSVP UDP Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{91C733AA-510D-41D3-B67A-4441103BAE50}] SEQPACKET 1 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{91C733AA-510D-41D3-B67A-4441103BAE50}] DATAGRAM 1 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{4A8E4D1C-24D8-40C3-BC41-D04B5D505F39}] SEQPACKET 5 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{4A8E4D1C-24D8-40C3-BC41-D04B5D505F39}] DATAGRAM 5 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip_{C8F77A1D-B3A2-4DE2-AE72-C377BBD10D9A}] SEQPACKET 7 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip_{C8F77A1D-B3A2-4DE2-AE72-C377BBD10D9A}] DATAGRAM 7 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{C8F77A1D-B3A2-4DE2-AE72-C377BBD10D9A}] SEQPACKET 8 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{C8F77A1D-B3A2-4DE2-AE72-C377BBD10D9A}] DATAGRAM 8 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{4A8E4D1C-24D8-40C3-BC41-D04B5D505F39}] SEQPACKET 6 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{4A8E4D1C-24D8-40C3-BC41-D04B5D505F39}] DATAGRAM 6 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{3D95D40E-1835-44C6-A621-968094D90452}] SEQPACKET 10 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{3D95D40E-1835-44C6-A621-968094D90452}] DATAGRAM 10 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{D6AD3B6C-2F8E-49B4-BDCD-DB35518116E7}] SEQPACKET 9 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{D6AD3B6C-2F8E-49B4-BDCD-DB35518116E7}] DATAGRAM 9 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{18908ACF-76C1-4139-8C1C-89DF049156C5}] SEQPACKET 4 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{18908ACF-76C1-4139-8C1C-89DF049156C5}] DATAGRAM 4 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{4112C824-372C-4014-87AE-1BC13EA6E4CD}] SEQPACKET 3 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{4112C824-372C-4014-87AE-1BC13EA6E4CD}] DATAGRAM 3 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{2E408326-9611-4C41-B766-C4CB82734986}] SEQPACKET 0 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{2E408326-9611-4C41-B766-C4CB82734986}] DATAGRAM 0 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{91C733AA-510D-41D3-B67A-4441103BAE50}] SEQPACKET 2 : 2 : 5 :
MSAFD NetBIOS [\Device\NetBT_Tcpip6_{91C733AA-510D-41D3-B67A-4441103BAE50}] DATAGRAM 2 : 2 : 2 : %SystemRoot%\system32\mswsock.dll
VMCI sockets DGRAM : 0 : 2 :
VMCI sockets STREAM : 0 : 1 : C:\Program Files\VMware\VMware Workstation\vsocklib.dll
This report also contains technical information about the state of the application when it crashed.Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
Some problems with 3D with xorg 1.9.2-1 and xf86-video-intel 2.12.0-3
I have some problems with the upgrade to xorg 1.9.1-1 and xf86-video-intel 2.12.0-3. Glxgears does not run smoothly at all and I got 15-20 fps (instead of the normal 60 because intel should sync with the V refresh rate). Very curiously, these problems disapear if I move the mouse cursor somewhere in the screen. Then glxgears run smooth and I have indeed the expected 60 fps
There are no error messages and glxinfo say that 3D is indeed enabled.
Xorg log file:
[ 358.899] _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
[ 358.899] _XSERVTransOpen: transport open failed for inet6/myhost:0
[ 358.899] _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
[ 358.900]
X.Org X Server 1.9.2
Release Date: 2010-10-30
[ 358.900] X Protocol Version 11, Revision 0
[ 358.900] Build Operating System: Linux 2.6.35-ARCH i686
[ 358.900] Current Operating System: Linux myhost 2.6.35-ARCH #1 SMP PREEMPT Sat Oct 30 19:57:05 UTC 2010 i686
[ 358.900] Kernel command line: root=/dev/disk/by-uuid/e5c72fc3-4e8b-4f5d-9023-12216af63d84 resume=/dev/disk/by-uuid/96f14b75-fb64-4881-863d-124af7c13e2f ro
[ 358.900] Build Date: 01 November 2010 10:23:07PM
[ 358.900]
[ 358.900] Current version of pixman: 0.18.4
[ 358.900] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 358.900] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 358.900] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov 9 10:14:10 2010
[ 358.900] (==) Using config file: "/etc/X11/xorg.conf"
[ 358.901] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 358.901] (==) ServerLayout "X.org Configured"
[ 358.901] (**) |-->Screen "Screen0" (0)
[ 358.901] (**) | |-->Monitor "Monitor0"
[ 358.901] (**) | |-->Device "Card0"
[ 358.901] (**) |-->Input Device "Mouse0"
[ 358.901] (**) |-->Input Device "touchpad"
[ 358.901] (**) |-->Input Device "Keyboard0"
[ 358.901] (**) Option "DontZap" "off"
[ 358.901] (**) Option "StandbyTime" "5"
[ 358.901] (**) Option "SuspendTime" "5"
[ 358.901] (**) Option "OffTime" "5"
[ 358.901] (**) Option "Xinerama" "on"
[ 358.901] (**) Option "AutoAddDevices" "off"
[ 358.901] (**) Not automatically adding devices
[ 358.901] (==) Automatically enabling devices
[ 358.902] (**) Xinerama: enabled
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 358.902] Entry deleted from font path.
[ 358.902] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 358.902] Entry deleted from font path.
[ 358.902] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 358.902] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/75dpi/
[ 358.902] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 358.902] (II) Loader magic: 0x81f1f80
[ 358.902] (II) Module ABI versions:
[ 358.902] X.Org ANSI C Emulation: 0.4
[ 358.902] X.Org Video Driver: 8.0
[ 358.902] X.Org XInput driver : 11.0
[ 358.902] X.Org Server Extension : 4.0
[ 358.903] (--) PCI:*(0:0:2:0) 8086:27a2:1584:9916 rev 3, Mem @ 0xb0080000/524288, 0xc0000000/268435456, 0xb0040000/262144, I/O @ 0x00001800/8
[ 358.903] (--) PCI: (0:0:2:1) 8086:27a6:1584:9916 rev 3, Mem @ 0xb0100000/524288
[ 358.904] (II) Open ACPI successful (/var/run/acpid.socket)
[ 358.904] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
[ 358.904] (II) LoadModule: "extmod"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 358.904] (II) Module extmod: vendor="X.Org Foundation"
[ 358.904] compiled for 1.9.2, module version = 1.0.0
[ 358.904] Module class: X.Org Server Extension
[ 358.904] ABI class: X.Org Server Extension, version 4.0
[ 358.904] (II) Loading extension MIT-SCREEN-SAVER
[ 358.904] (II) Loading extension XFree86-VidModeExtension
[ 358.904] (II) Loading extension XFree86-DGA
[ 358.904] (II) Loading extension DPMS
[ 358.904] (II) Loading extension XVideo
[ 358.904] (II) Loading extension XVideo-MotionCompensation
[ 358.904] (II) Loading extension X-Resource
[ 358.904] (II) LoadModule: "glx"
[ 358.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 358.905] (II) Module glx: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.0.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (==) AIGLX enabled
[ 358.905] (II) Loading extension GLX
[ 358.905] (II) LoadModule: "record"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 358.905] (II) Module record: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.13.0
[ 358.905] Module class: X.Org Server Extension
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension RECORD
[ 358.905] (II) LoadModule: "dri2"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 358.905] (II) Module dri2: vendor="X.Org Foundation"
[ 358.905] compiled for 1.9.2, module version = 1.2.0
[ 358.905] ABI class: X.Org Server Extension, version 4.0
[ 358.905] (II) Loading extension DRI2
[ 358.905] (II) LoadModule: "dbe"
[ 358.905] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 358.906] (II) Module dbe: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] Module class: X.Org Server Extension
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension DOUBLE-BUFFER
[ 358.906] (II) LoadModule: "dri"
[ 358.906] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 358.906] (II) Module dri: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.2, module version = 1.0.0
[ 358.906] ABI class: X.Org Server Extension, version 4.0
[ 358.906] (II) Loading extension XFree86-DRI
[ 358.906] (II) LoadModule: "synaptics"
[ 358.906] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.906] (II) Module synaptics: vendor="X.Org Foundation"
[ 358.906] compiled for 1.9.0, module version = 1.3.0
[ 358.906] Module class: X.Org XInput Driver
[ 358.906] ABI class: X.Org XInput driver, version 11.0
[ 358.906] (II) LoadModule: "intel"
[ 358.906] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 358.907] (II) Module intel: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 2.12.0
[ 358.907] Module class: X.Org Video Driver
[ 358.907] ABI class: X.Org Video Driver, version 8.0
[ 358.907] (II) LoadModule: "mouse"
[ 358.907] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 358.907] (II) Module mouse: vendor="X.Org Foundation"
[ 358.907] compiled for 1.9.0, module version = 1.6.0
[ 358.907] Module class: X.Org XInput Driver
[ 358.907] ABI class: X.Org XInput driver, version 11.0
[ 358.907] (II) LoadModule: "synaptics"
[ 358.907] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 358.907] (II) LoadModule: "kbd"
[ 358.908] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
[ 358.908] (II) Module kbd: vendor="X.Org Foundation"
[ 358.908] compiled for 1.9.0, module version = 1.4.0
[ 358.908] Module class: X.Org XInput Driver
[ 358.908] ABI class: X.Org XInput driver, version 11.0
[ 358.908] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
[ 358.908] (--) using VT number 7
[ 358.908] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 358.908] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 358.916] drmOpenDevice: node name is /dev/dri/card0
[ 358.916] drmOpenDevice: open result is 10, (OK)
[ 358.916] drmOpenByBusid: drmOpenMinor returns 10
[ 358.916] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 358.916] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 358.916] (==) intel(0): RGB weight 888
[ 358.916] (==) intel(0): Default visual is TrueColor
[ 358.916] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[ 358.916] (--) intel(0): Chipset: "945GM"
[ 358.916] (==) intel(0): video overlay key set to 0x101fe
[ 358.953] (II) intel(0): Output VGA1 using monitor section vgamonitor
[ 358.953] (**) intel(0): Option "Disable" "true"
[ 359.059] (II) intel(0): Output LVDS1 using monitor section lvdsmonitor
[ 359.059] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 359.340] (II) intel(0): Output TV1 has no monitor section
[ 359.380] (II) intel(0): EDID for output VGA1
[ 359.486] (II) intel(0): EDID for output LVDS1
[ 359.486] (II) intel(0): Manufacturer: CPT Model: 13a6 Serial#: 0
[ 359.486] (II) intel(0): Year: 2006 Week: 17
[ 359.486] (II) intel(0): EDID Version: 1.3
[ 359.486] (II) intel(0): Digital Display Input
[ 359.486] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 359.486] (II) intel(0): Gamma: 2.20
[ 359.486] (II) intel(0): No DPMS capabilities specified
[ 359.486] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 359.486] (II) intel(0): First detailed timing is preferred mode
[ 359.486] (II) intel(0): redX: 0.600 redY: 0.340 greenX: 0.309 greenY: 0.559
[ 359.486] (II) intel(0): blueX: 0.149 blueY: 0.131 whiteX: 0.315 whiteY: 0.329
[ 359.486] (II) intel(0): Manufacturer's mask: 0
[ 359.486] (II) intel(0): Supported detailed timing:
[ 359.486] (II) intel(0): clock: 68.9 MHz Image Size: 331 x 207 mm
[ 359.486] (II) intel(0): h_active: 1280 h_sync: 1301 h_sync_end 1333 h_blank_end 1408 h_border: 0
[ 359.486] (II) intel(0): v_active: 800 v_sync: 801 v_sync_end 804 v_blanking: 816 v_border: 0
[ 359.486] (II) intel(0): Unknown vendor-specific block f
[ 359.486] (II) intel(0): FD1631154WB4
[ 359.486] (II) intel(0): /BRZÄêÿ
[ 359.486] (II) intel(0): EDID (in hex):
[ 359.486] (II) intel(0): 00ffffffffffff000e14a61300000000
[ 359.486] (II) intel(0): 11100103802115780a806d99574f8f26
[ 359.486] (II) intel(0): 21505400000001010101010101010101
[ 359.486] (II) intel(0): 010101010101ea1a0080502010301520
[ 359.486] (II) intel(0): 13004bcf100000190000000f00000000
[ 359.486] (II) intel(0): 0000000000206e050f00000000fe0046
[ 359.486] (II) intel(0): 44313633313135345742340a000000fe
[ 359.486] (II) intel(0): 002f42525a81c4eaff01010a2020004f
[ 359.487] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 359.487] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 359.487] (II) intel(0): Printing probed modes for output LVDS1
[ 359.487] (II) intel(0): Modeline "1280x800"x60.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 359.487] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 359.487] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 359.487] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 359.766] (II) intel(0): EDID for output TV1
[ 359.766] (II) intel(0): Output VGA1 disabled by config file
[ 359.766] (II) intel(0): Output LVDS1 connected
[ 359.766] (II) intel(0): Output TV1 disconnected
[ 359.766] (II) intel(0): Using exact sizes for initial modes
[ 359.766] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 359.766] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 359.766] (II) intel(0): Pageflipping enabled in kernel, but disabled in X
[ 359.766] (II) intel(0): Don't panic: https://bugzilla.redhat.com/588421
[ 359.766] (==) intel(0): DPI set to (96, 96)
[ 359.767] (II) Loading sub module "fb"
[ 359.767] (II) LoadModule: "fb"
[ 359.767] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 359.767] (II) Module fb: vendor="X.Org Foundation"
[ 359.767] compiled for 1.9.2, module version = 1.0.0
[ 359.767] ABI class: X.Org ANSI C Emulation, version 0.4
[ 359.767] (==) Depth 24 pixmap format is 32 bpp
[ 359.767] (II) intel(0): [DRI2] Setup complete
[ 359.767] (II) intel(0): [DRI2] DRI driver: i915
[ 359.767] (**) intel(0): Tiling enabled
[ 359.767] (**) intel(0): SwapBuffers wait enabled
[ 359.767] (==) intel(0): VideoRam: 262144 KB
[ 359.767] (II) intel(0): Allocated new frame buffer 1280x800 stride 8192, tiled
[ 359.767] (II) UXA(0): Driver registered support for the following operations:
[ 359.767] (II) solid
[ 359.767] (II) copy
[ 359.767] (II) composite (RENDER acceleration)
[ 359.767] (II) put_image
[ 359.767] (II) get_image
[ 359.767] (==) intel(0): Backing store disabled
[ 359.767] (==) intel(0): Silken mouse enabled
[ 359.767] (II) intel(0): Initializing HW Cursor
[ 359.803] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 359.804] (==) intel(0): DPMS enabled
[ 359.805] (==) intel(0): Intel XvMC decoder disabled
[ 359.805] (II) intel(0): Set up textured video
[ 359.805] (II) intel(0): Set up overlay video
[ 359.805] (II) intel(0): direct rendering: DRI2 Enabled
[ 359.805] (--) RandR disabled
[ 359.805] (II) Initializing built-in extension Generic Event Extension
[ 359.805] (II) Initializing built-in extension SHAPE
[ 359.805] (II) Initializing built-in extension MIT-SHM
[ 359.805] (II) Initializing built-in extension XInputExtension
[ 359.805] (II) Initializing built-in extension XTEST
[ 359.805] (II) Initializing built-in extension BIG-REQUESTS
[ 359.805] (II) Initializing built-in extension SYNC
[ 359.805] (II) Initializing built-in extension XKEYBOARD
[ 359.805] (II) Initializing built-in extension XC-MISC
[ 359.805] (II) Initializing built-in extension SECURITY
[ 359.805] (II) Initializing built-in extension XINERAMA
[ 359.805] (II) Initializing built-in extension XFIXES
[ 359.805] (II) Initializing built-in extension RENDER
[ 359.805] (II) Initializing built-in extension RANDR
[ 359.805] (II) Initializing built-in extension COMPOSITE
[ 359.805] (II) Initializing built-in extension DAMAGE
[ 359.821] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 359.821] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 359.821] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 359.821] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 359.821] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 359.821] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 359.821] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 359.822] (II) intel(0): Setting screen physical size to 338 x 211
[ 360.019] (**) Option "Protocol" "auto"
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.019] (**) Mouse0: Device: "/dev/input/mice"
[ 360.019] (**) Mouse0: Protocol: "auto"
[ 360.019] (**) Option "CorePointer"
[ 360.019] (**) Mouse0: always reports core events
[ 360.019] (**) Option "Device" "/dev/input/mice"
[ 360.019] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
[ 360.019] (**) Option "ZAxisMapping" "4 5 6 7"
[ 360.019] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
[ 360.019] (**) Mouse0: Buttons: 11
[ 360.019] (**) Option "Sensitivity" "0.7"
[ 360.019] (**) Mouse0: Sensitivity: 0.7
[ 360.019] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
[ 360.019] (**) Mouse0: (accel) keeping acceleration scheme 1
[ 360.019] (**) Mouse0: (accel) acceleration profile 0
[ 360.019] (**) Mouse0: (accel) acceleration factor: 2.000
[ 360.019] (**) Mouse0: (accel) acceleration threshold: 4
[ 360.019] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
[ 360.311] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 360.311] (II) Synaptics touchpad driver version 1.3.0
[ 360.312] (--) touchpad auto-dev sets device to /dev/input/event6
[ 360.312] (**) Option "Device" "/dev/input/event6"
[ 360.312] (--) touchpad: x-axis range 1472 - 5472
[ 360.312] (--) touchpad: y-axis range 1408 - 4448
[ 360.312] (--) touchpad: pressure range 0 - 255
[ 360.312] (--) touchpad: finger width range 0 - 0
[ 360.312] (--) touchpad: buttons: left right double triple
[ 360.312] (--) touchpad: invalid finger width range. defaulting to 0 - 16
[ 360.312] (**) Option "TapButton1" "1"
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "SendCoreEvents"
[ 360.312] (**) touchpad: always reports core events
[ 360.312] (II) XINPUT: Adding extended input device "touchpad" (type: TOUCHPAD)
[ 360.312] (**) touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 360.312] (**) touchpad: MaxSpeed is now 1.75
[ 360.312] (**) touchpad: AccelFactor is now 0.040
[ 360.312] (**) touchpad: (accel) keeping acceleration scheme 1
[ 360.312] (**) touchpad: (accel) acceleration profile 1
[ 360.312] (**) touchpad: (accel) acceleration factor: 2.000
[ 360.312] (**) touchpad: (accel) acceleration threshold: 4
[ 360.312] (--) touchpad: touchpad found
[ 360.312] (**) Option "CoreKeyboard"
[ 360.312] (**) Keyboard0: always reports core events
[ 360.312] (**) Option "Protocol" "standard"
[ 360.312] (**) Keyboard0: Protocol: standard
[ 360.312] (**) Option "XkbRules" "base"
[ 360.312] (**) Keyboard0: XkbRules: "base"
[ 360.312] (**) Option "XkbModel" "pc105"
[ 360.312] (**) Keyboard0: XkbModel: "pc105"
[ 360.312] (**) Option "XkbLayout" "fr"
[ 360.313] (**) Keyboard0: XkbLayout: "fr"
[ 360.313] (**) Option "XkbVariant" "oss"
[ 360.313] (**) Keyboard0: XkbVariant: "oss"
[ 360.313] (**) Option "XkbOptions" "terminate:ctrl_alt_bksp"
[ 360.313] (**) Keyboard0: XkbOptions: "terminate:ctrl_alt_bksp"
[ 360.313] (**) Option "CustomKeycodes" "off"
[ 360.313] (**) Keyboard0: CustomKeycodes disabled
[ 360.313] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
[ 360.372] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 360.372] (II) AutoAddDevices is off - not adding device.
[ 360.373] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 360.373] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.376] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 360.376] (II) AutoAddDevices is off - not adding device.
[ 360.377] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 360.377] (II) AutoAddDevices is off - not adding device.
[ 360.379] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/event9)
[ 360.379] (II) AutoAddDevices is off - not adding device.
[ 360.380] (II) config/udev: Adding input device MLK Trust Wireless Mouse (/dev/input/mouse1)
[ 360.380] (II) AutoAddDevices is off - not adding device.
[ 360.382] (II) config/udev: Adding input device Western Digital External HDD (/dev/input/event8)
[ 360.382] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 360.385] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 360.385] (II) AutoAddDevices is off - not adding device.
[ 362.484] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 368.334] (II) Open ACPI successful (/var/run/acpid.socket)
[ 368.334] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 368.503] (II) intel(0): EDID vendor "CPT", prod id 5030
[ 368.503] (II) intel(0): Printing DDC gathered Modelines:
[ 368.503] (II) intel(0): Modeline "1280x800"x0.0 68.90 1280 1301 1333 1408 800 801 804 816 -hsync -vsync (48.9 kHz)
[ 369.076] (II) Mouse0: ps2EnableDataReporting: succeeded
[ 369.076] (--) touchpad: touchpad found
[ 441.972] (II) 3rd Button detected: disabling emulate3Button
output of glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 945GM GEM 20100328 2010Q1 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.8.3
OpenGL extensions:
GL_ARB_copy_buffer, GL_ARB_depth_texture, GL_ARB_draw_buffers,
GL_ARB_draw_elements_base_vertex, GL_ARB_fragment_program,
GL_ARB_half_float_pixel, GL_ARB_map_buffer_range, GL_ARB_multisample,
GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_provoking_vertex, GL_ARB_shader_objects,
GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow,
GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_cube_map, GL_ARB_texture_env_add,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle,
GL_ARB_transpose_matrix, GL_ARB_vertex_array_object,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_object, GL_EXT_fog_coord,
GL_EXT_gpu_program_parameters, GL_EXT_multi_draw_arrays,
GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels,
GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
GL_EXT_polygon_offset, GL_EXT_provoking_vertex, GL_EXT_rescale_normal,
GL_EXT_secondary_color, GL_EXT_separate_specular_color,
GL_EXT_shadow_funcs, GL_EXT_stencil_two_side, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_cube_map, GL_EXT_texture_edge_clamp,
GL_EXT_texture_env_add, GL_EXT_texture_env_combine,
GL_EXT_texture_env_dot3, GL_EXT_texture_filter_anisotropic,
GL_EXT_texture_lod_bias, GL_EXT_texture_object, GL_EXT_texture_rectangle,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_APPLE_object_purgeable,
GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3,
GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_packed_depth_stencil, GL_NV_texture_env_combine4,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program,
GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGIS_generate_mipmap,
GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp,
GL_SGIS_texture_lod, GL_SUN_multi_draw_arrays
32 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8e 24 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x8f 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x90 24 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x91 24 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x92 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x93 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x94 24 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x95 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x96 24 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x97 24 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x98 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x99 24 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x9a 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x9b 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x9c 24 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9d 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9e 24 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x9f 24 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa0 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa1 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa2 24 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa3 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa4 24 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0xa5 24 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa6 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xa7 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0xa8 24 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0xa9 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0xaa 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x5d 32 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
48 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x5e 0 tc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x5f 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x60 0 tc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x62 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x63 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x64 0 tc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x66 0 tc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x67 0 tc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x68 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x6a 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6c 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x70 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x71 0 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x72 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x73 0 tc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x74 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x75 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x76 0 dc 0 16 0 r . . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x78 0 dc 0 16 0 r y . 5 6 5 0 0 0 0 0 0 0 0 0 0 None
0x79 0 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7a 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7b 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x7c 0 dc 0 24 0 r . . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7d 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7e 0 dc 0 24 0 r y . 8 8 8 0 0 0 0 0 0 0 0 0 0 None
0x7f 0 dc 0 24 0 r . . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x80 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x82 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x84 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x85 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x86 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x87 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x88 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x89 0 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x8a 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 0 0 0 0 0 0 None
0x8b 0 dc 0 24 0 r y . 8 8 8 0 0 24 8 16 16 16 0 0 0 Slow
0x8c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x8d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 SlowGusar wrote:
*sigh*
Do you have problems with anything that's *not* glxgears?
I have indeed not seen other problems. Presently the only other software that I believe use openGL that I use is googleearth; which run fine. Could it be a problem with glxgears? -
Problems with Steam - Dota2 and ETS2
Hello
I had never problems with Arch + xfce but last time I made fresh install of Arch with KDE and problems begins. Strange logs in steam running Dota 2 and Euro Truck Simulator 2. Dota 2 freezing, jumping even 60+ fps, both games can freeze for 1 min with sound.
Lenovo Y580 - GTX660M
After running Dota 2 with launch options (optirun -b primus %command% -console) output from console:
Game update: AppID 570 "Dota 2", ProcID 1441, IP 0.0.0.0:0
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
pid 1455 != 1454, skipping destruction (fork without exec?)
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_64/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS64): ignored.
Installing breakpad exception handler for appid(gameoverlayui)/version(20140715181500_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
[0725/222647:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
[0725/222647:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Using breakpad crash handler
Setting breakpad minidump AppID = 570
Forcing breakpad minidump interfaces to load
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded yes]
Steam_SetMinidumpSteamID: Setting Steam ID: 76561198074650116
SDL video target is 'x11'
SDL failed to create GL compatibility profile (whichProfile=0!
This system supports the OpenGL extension GL_EXT_framebuffer_object.
This system supports the OpenGL extension GL_EXT_framebuffer_blit.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample.
This system DOES NOT support the OpenGL extension GL_APPLE_fence.
This system supports the OpenGL extension GL_NV_fence.
This system supports the OpenGL extension GL_ARB_sync.
This system supports the OpenGL extension GL_EXT_draw_buffers2.
This system supports the OpenGL extension GL_EXT_bindable_uniform.
This system DOES NOT support the OpenGL extension GL_APPLE_flush_buffer_range.
This system supports the OpenGL extension GL_ARB_map_buffer_range.
This system supports the OpenGL extension GL_ARB_vertex_buffer_object.
This system supports the OpenGL extension GL_ARB_occlusion_query.
This system DOES NOT support the OpenGL extension GL_APPLE_texture_range.
This system DOES NOT support the OpenGL extension GL_APPLE_client_storage.
This system DOES NOT support the OpenGL extension GL_ARB_uniform_buffer.
This system supports the OpenGL extension GL_ARB_vertex_array_bgra.
This system supports the OpenGL extension GL_EXT_vertex_array_bgra.
This system supports the OpenGL extension GL_ARB_framebuffer_object.
This system DOES NOT support the OpenGL extension GL_GREMEDY_string_marker.
This system supports the OpenGL extension GL_ARB_debug_output.
This system supports the OpenGL extension GL_EXT_direct_state_access.
This system supports the OpenGL extension GL_NV_bindless_texture.
This system DOES NOT support the OpenGL extension GL_AMD_pinned_memory.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample_blit_scaled.
This system supports the OpenGL extension GL_EXT_texture_sRGB_decode.
This system supports the OpenGL extension GL_NVX_gpu_memory_info.
This system DOES NOT support the OpenGL extension GL_ATI_meminfo.
This system supports the OpenGL extension GL_EXT_texture_compression_s3tc.
This system supports the OpenGL extension GL_EXT_texture_compression_dxt1.
This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt3.
This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt5.
This system DOES NOT support the OpenGL extension GLX_EXT_swap_control_tear.
GL_NV_bindless_texture: DISABLED
GL_AMD_pinned_memory: DISABLED
GL_EXT_texture_sRGB_decode: AVAILABLE
GL_NVX_gpu_memory_info: AVAILABLE
GL_ATI_meminfo: UNAVAILABLE
GL_NVX_gpu_memory_info: Total Dedicated: 2097152, Total Avail: 2097152, Current Avail: 2076116
GL_MAX_SAMPLES_EXT: 32
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/sound_vo_english
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/pak01
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/platform/pak01
Did not detect any valid joysticks.
WARNING: unable to link Test_StartScript and Test_StartScript because one or more is a ConCommand.
WARNING: unable to link Test_RandomChance and Test_RandomChance because one or more is a ConCommand.
WARNING: unable to link Test_LoopForNumSeconds and Test_LoopForNumSeconds because one or more is a ConCommand.
WARNING: unable to link Test_Loop and Test_Loop because one or more is a ConCommand.
WARNING: unable to link Test_LoopCount and Test_LoopCount because one or more is a ConCommand.
WARNING: unable to link Test_StartLoop and Test_StartLoop because one or more is a ConCommand.
WARNING: unable to link log_flags and log_flags because one or more is a ConCommand.
WARNING: unable to link log_color and log_color because one or more is a ConCommand.
WARNING: unable to link log_verbosity and log_verbosity because one or more is a ConCommand.
WARNING: unable to link log_level and log_level because one or more is a ConCommand.
WARNING: unable to link log_dumpchannels and log_dumpchannels because one or more is a ConCommand.
Load a scaleform font provider?
Creating D3D9 device with D3DCREATE_MULTITHREADED
IDirect3DDevice9::Create: BackBufWidth: 1366, BackBufHeight: 768, D3DFMT: 3, BackBufCount: 1, MultisampleType: 0, MultisampleQuality: 0
GL sampler object usage: DISABLED
##### swap interval = 0 swap limit = 1 #####
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
!! Controller config file passed by steamworks game 570 did not exist at /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/cfg/controller.vdf
Installing breakpad exception handler for appid(steam)/version(1405474565_client)
[0725/222707:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
[0725/222707:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
Im not able to run ETS 2 it's going to change resolution to 1024x768 in whole desktop and then crash. (Launch option: optirun -b primus %command%) output:
Game update: AppID 227300 "Euro Truck Simulator 2", ProcID 1554, IP 0.0.0.0:0
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
Setting breakpad minidump AppID = 227300
Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded no]
Registered appid 227300 to use native controller config at /home/akikyo/.local/share/Steam/SteamApps/common/Euro Truck Simulator 2/controller.vdf
X Error of failed request: GLXUnsupportedPrivateRequest
Major opcode of failed request: 155 (GLX)
Minor opcode of failed request: 16 (X_GLXVendorPrivate)
Serial number of failed request: 80
Current serial number in output stream: 82
Game removed: AppID 227300 "Euro Truck Simulator 2", ProcID 1567
sudo journalctl
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508930] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508943] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508969] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508984] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation.
Jul 25 22:35:16 lenovo kernel: eurotrucks2[1567]: segfault at 17 ip 00007f40f1e30433 sp 00007fff05479db0 error 6 in steamclient.so[7f40f1b66000+f7b000]
Jul 25 22:35:16 lenovo kernel: [drm] Module unloaded
Jul 25 22:35:16 lenovo kernel: bbswitch: disabling discrete graphics
Jul 25 22:35:16 lenovo kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140214/nsarguments-95)
Jul 25 22:35:16 lenovo kernel: pci 0000:01:00.0: Refused to change power state, currently in D0
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838215] [ERROR][XORG] (EE) Server terminated successfully (0). Closing log file.
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838233] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838238] [ERROR][XORG] (EE) Backtrace:
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838242] [ERROR][XORG] (EE) 0: Xorg (xorg_backtrace+0x56) [0x58f186]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838245] [ERROR][XORG] (EE) 1: Xorg (0x400000+0x192fc9) [0x592fc9]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838249] [ERROR][XORG] (EE) 2: /usr/lib/libpthread.so.0 (0x7fd21c5c8000+0xf4b0) [0x7fd21c5d74b0]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838256] [ERROR][XORG] (EE) 3: /usr/lib/libc.so.6 (malloc_usable_size+0x25) [0x7fd21b290d25]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838272] [ERROR][XORG] (EE) 4: /usr/lib/nvidia/libGL.so.1 (0x7fd21818b000+0xb61d9) [0x7fd2182411d9]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838286] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838298] [ERROR][XORG] (EE) Segmentation fault at address 0x0
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838306] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838317] [ERROR][XORG] (EE) Caught signal 11 (Segmentation fault). Server aborting
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838320] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838323] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838329] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838334] [ERROR][XORG] (EE)
sudo nano /var/log/Xorg.8.log
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 887.399] X Protocol Version 11, Revision 0
[ 887.399] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 887.399] Current Operating System: Linux lenovo 3.15.5-2-ARCH #1 SMP PREEMPT Fri Jul 11 07:56:02 CEST 2014 x86_64
[ 887.399] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a89135f9-ef1e-4b90-a073-ee78d492b58a rw rcutree.rcu_idle_gp_delay=1 quiet
[ 887.399] Build Date: 27 June 2014 07:32:26PM
[ 887.399]
[ 887.399] Current version of pixman: 0.32.6
[ 887.399] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 887.399] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 887.399] (==) Log file: "/var/log/Xorg.8.log", Time: Fri Jul 25 22:35:11 2014
[ 887.400] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 887.400] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 887.400] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 887.400] (==) ServerLayout "Layout0"
[ 887.400] (==) No screen section available. Using defaults.
[ 887.400] (**) |-->Screen "Default Screen Section" (0)
[ 887.400] (**) | |-->Monitor "<default monitor>"
[ 887.400] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 887.400] (**) | |-->Device "DiscreteNvidia"
[ 887.400] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 887.400] (**) Option "AutoAddDevices" "false"
[ 887.400] (**) Option "AutoAddGPU" "false"
[ 887.400] (**) Not automatically adding devices
[ 887.400] (==) Automatically enabling devices
[ 887.400] (**) Not automatically adding GPU devices
[ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 887.401] Entry deleted from font path.
[ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 887.401] Entry deleted from font path.
[ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 887.401] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 887.401] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 887.401] (==) |-->Input Device "<default pointer>"
[ 887.401] (==) |-->Input Device "<default keyboard>"
[ 887.401] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 887.401] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 887.401] (II) Loader magic: 0x811cc0
[ 887.401] (II) Module ABI versions:
[ 887.401] X.Org ANSI C Emulation: 0.4
[ 887.401] X.Org Video Driver: 15.0
[ 887.401] X.Org XInput driver : 20.0
[ 887.401] X.Org Server Extension : 8.0
[ 887.401] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 887.401] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 887.401] setversion 1.4 failed: Permission denied
[ 887.403] (--) PCI:*(0:1:0:0) 10de:0fd4:17aa:3977 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 887.403] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 887.403] Initializing built-in extension Generic Event Extension
[ 887.404] Initializing built-in extension SHAPE
[ 887.404] Initializing built-in extension MIT-SHM
[ 887.404] Initializing built-in extension XInputExtension
[ 887.404] Initializing built-in extension XTEST
[ 887.404] Initializing built-in extension BIG-REQUESTS
[ 887.404] Initializing built-in extension SYNC
[ 887.404] Initializing built-in extension XKEYBOARD
[ 887.404] Initializing built-in extension XC-MISC
[ 887.404] Initializing built-in extension SECURITY
[ 887.404] Initializing built-in extension XINERAMA
[ 887.404] Initializing built-in extension XFIXES
[ 887.404] Initializing built-in extension RENDER
[ 887.404] Initializing built-in extension RANDR
[ 887.404] Initializing built-in extension COMPOSITE
[ 887.404] Initializing built-in extension DAMAGE
[ 887.404] Initializing built-in extension MIT-SCREEN-SAVER
[ 887.404] Initializing built-in extension DOUBLE-BUFFER
[ 887.404] Initializing built-in extension RECORD
[ 887.404] Initializing built-in extension DPMS
[ 887.404] Initializing built-in extension Present
[ 887.404] Initializing built-in extension DRI3
[ 887.404] Initializing built-in extension X-Resource
[ 887.404] Initializing built-in extension XVideo
[ 887.404] Initializing built-in extension XVideo-MotionCompensation
[ 887.404] Initializing built-in extension XFree86-VidModeExtension
[ 887.404] Initializing built-in extension XFree86-DGA
[ 887.404] Initializing built-in extension XFree86-DRI
[ 887.404] Initializing built-in extension DRI2
[ 887.404] (II) "glx" will be loaded by default.
[ 887.404] (II) LoadModule: "dri2"
[ 887.404] (II) Module "dri2" already built-in
[ 887.404] (II) LoadModule: "glamoregl"
[ 887.404] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 887.454] (II) Module glamoregl: vendor="X.Org Foundation"
[ 887.454] compiled for 1.15.0, module version = 0.6.0
[ 887.454] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.454] (II) LoadModule: "glx"
[ 887.454] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 887.495] (II) Module glx: vendor="NVIDIA Corporation"
[ 887.495] compiled for 4.0.2, module version = 1.0.0
[ 887.495] Module class: X.Org Server Extension
[ 887.495] (II) NVIDIA GLX Module 340.24 Wed Jul 2 15:04:31 PDT 2014
[ 887.495] Loading extension GLX
[ 887.495] (II) LoadModule: "nvidia"
[ 887.495] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 887.500] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 887.500] compiled for 4.0.2, module version = 1.0.0
[ 887.500] Module class: X.Org Video Driver
[ 887.500] (II) LoadModule: "mouse"
[ 887.500] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 887.502] (II) Module mouse: vendor="X.Org Foundation"
[ 887.502] compiled for 1.15.0, module version = 1.9.0
[ 887.502] Module class: X.Org XInput Driver
[ 887.502] ABI class: X.Org XInput driver, version 20.0
[ 887.502] (II) LoadModule: "kbd"
[ 887.502] (WW) Warning, couldn't open module kbd
[ 887.502] (II) UnloadModule: "kbd"
[ 887.502] (II) Unloading kbd
[ 887.502] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 887.502] (II) NVIDIA dlloader X Driver 340.24 Wed Jul 2 14:42:23 PDT 2014
[ 887.502] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 887.502] (--) using VT number 1
[ 887.502] (II) Loading sub module "fb"
[ 887.502] (II) LoadModule: "fb"
[ 887.502] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 887.504] (II) Module fb: vendor="X.Org Foundation"
[ 887.504] compiled for 1.15.2, module version = 1.0.0
[ 887.504] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.504] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 887.504] (II) Loading sub module "wfb"
[ 887.504] (II) LoadModule: "wfb"
[ 887.504] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 887.506] (II) Module wfb: vendor="X.Org Foundation"
[ 887.506] compiled for 1.15.2, module version = 1.0.0
[ 887.506] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.506] (II) Loading sub module "ramdac"
[ 887.506] (II) LoadModule: "ramdac"
[ 887.506] (II) Module "ramdac" already built-in
[ 887.506] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 887.506] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 887.506] (==) NVIDIA(0): RGB weight 888
[ 887.506] (==) NVIDIA(0): Default visual is TrueColor
[ 887.506] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 887.506] (**) NVIDIA(0): Option "NoLogo" "true"
[ 887.506] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 887.507] (**) NVIDIA(0): Option "UseEDID" "false"
[ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 887.507] (**) NVIDIA(0): Enabling 2D acceleration
[ 887.507] (**) NVIDIA(0): Ignoring EDIDs
[ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 887.507] (**) NVIDIA(0): mode
[ 891.006] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 891.008] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660M (GK107) at PCI:1:0:0 (GPU-0)
[ 891.008] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 891.008] (--) NVIDIA(0): VideoBIOS: 80.07.3c.00.16
[ 891.008] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 891.008] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660M at PCI:1:0:0
[ 891.008] (--) NVIDIA(0): none
[ 891.008] (II) NVIDIA(0): Validated MetaModes:
[ 891.008] (II) NVIDIA(0): "NULL"
[ 891.008] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 891.008] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 891.008] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 891.008] (--) Depth 24 pixmap format is 32 bpp
[ 891.008] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 891.008] (II) NVIDIA: access.
[ 891.013] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 891.013] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 891.013] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 891.013] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 891.013] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 891.013] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 891.013] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 891.013] (II) NVIDIA(0): Config Options in the README.
[ 891.013] (II) NVIDIA(0): Setting mode "NULL"
[ 891.028] Loading extension NV-GLX
[ 891.035] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 891.035] (==) NVIDIA(0): Backing store enabled
[ 891.035] (==) NVIDIA(0): Silken mouse enabled
[ 891.035] (==) NVIDIA(0): DPMS enabled
[ 891.035] Loading extension NV-CONTROL
[ 891.036] (II) Loading sub module "dri2"
[ 891.036] (II) LoadModule: "dri2"
[ 891.036] (II) Module "dri2" already built-in
[ 891.036] (II) NVIDIA(0): [DRI2] Setup complete
[ 891.036] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 891.036] (--) RandR disabled
[ 891.044] (II) Initializing extension GLX
[ 891.100] (II) Using input driver 'mouse' for '<default pointer>'
[ 891.100] (**) Option "CorePointer" "on"
[ 891.100] (**) <default pointer>: always reports core events
[ 891.100] (WW) <default pointer>: No Device specified, looking for one...
[ 891.146] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 891.146] (--) <default pointer>: Device: "/dev/input/mice"
[ 891.146] (==) <default pointer>: Protocol: "Auto"
[ 891.146] (**) <default pointer>: always reports core events
[ 891.146] (**) Option "Device" "/dev/input/mice"
[ 891.200] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 891.200] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 891.200] (**) <default pointer>: Buttons: 9
[ 891.200] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 891.200] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 891.200] (**) <default pointer>: (accel) acceleration profile 0
[ 891.200] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 891.200] (**) <default pointer>: (accel) acceleration threshold: 4
[ 891.200] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 891.493] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 891.493] (II) LoadModule: "kbd"
[ 891.494] (WW) Warning, couldn't open module kbd
[ 891.494] (II) UnloadModule: "kbd"
[ 891.494] (II) Unloading kbd
[ 891.494] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 891.494] (EE) No input driver matching `kbd'
[ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.497] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.499] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 891.499] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 891.499] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 891.499] setversion 1.4 failed: Permission denied
[ 891.499] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event7)
[ 891.499] (II) AutoAddDevices is off - not adding device.
[ 891.500] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 891.500] (II) AutoAddDevices is off - not adding device.
[ 891.500] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event8)
[ 891.500] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event9)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event16)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event10)
[ 891.503] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[ 891.503] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 891.504] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 891.504] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 892.695] (II) UnloadModule: "mouse"
[ 892.720] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 892.723] (EE) Server terminated successfully (0). Closing log file.
Last edited by Akikyo (2014-07-24 21:04:45)I can't be sure but most of the dota2 output looks "normal" to me (I get the same yet it works fine).
eurotrucks is clearly crashing. You could try to force the resolution it uses in its config files?
Or maybe it's missing a lib (you may need to install 32bit versions):
ldd /path/to/eurotrucks
to see if that's the case. If not, you might have to take it up with the eurotrucks developers.
And you could try using fluxbox/openbox just to see what happens. A lot lighter than KDE.
Have a good look though: https://wiki.archlinux.org/index.php/Steam
and remember to check for missing 32bit libs. -
Problem with certificate authentication at wlc 4402
Hi,
we have a problem to get a connection from the client to the WLC.
we are using Cisco Aironet 1130 AG and a Cisco 4402 WLC in our network. The certificate service is installed on a Windows 2008 R2 server. We use a standalone Root CA with a Enterprise Sub CA hierarchy. Issueing certificates to clients works fine. The vendor and ca certificates are installed on the WLC and the user have his user certificate. During implementation we used following document: "http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a008093f1b9.shtml#wlc". Instead of Anonymous Bind, we use a service user to read in AD (works fine, too).
We use the Intel/PRO wireless utility on our Testclient and configured it for EAP-FAST and TLS. We can select the installed certificate in the utility, but when we try to connect, the utility throw the message: "Authentication failed due to an invalid certificate".
We´ve logged the WLC and thats a part of the logfile (i´ve greyed out all enterprise data):
*EAP Framework: Jan 18 12:08:21.921: EAP-AUTH-EVENT: Waiting for asynchronous reply from LL
*LDAP DB Task 1: Jan 18 12:08:21.921: ldapTask [1] received msg 'REQUEST' (2) in state 'IDLE' (1)
*LDAP DB Task 1: Jan 18 12:08:21.922: LDAP server 1 changed state to INIT
*LDAP DB Task 1: Jan 18 12:08:21.922: LDAP_OPT_REFERRALS = -1*LDAP DB Task 1: Jan 18 12:08:21.925: LDAP_CLIENT: UID Search (...)))
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: ldap_search_ext_s returns 0 85
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Returned 2 msgs including 0 references
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Returned msg 1 type 0x64
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Received 1 attributes in search entry msg
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT: Returned msg 2 type 0x65
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT : No matched DN
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT : Check result error 0 rc 1013
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT: Received no referrals in search result msg
*LDAP DB Task 1: Jan 18 12:08:21.927: ldapAuthRequest [1] called lcapi_query base="..." (rc = 0 - Success)
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP ATTR> dn = CN=... (size 76)
*LDAP DB Task 1: Jan 18 12:08:21.927: Handling LDAP response Success
*LDAP DB Task 1: Jan 18 12:08:21.927: 18:3d:a2:0a:ec:bc [Response] Client requested no retries for mobile 18:3D:A2:0A:EC:BC
*LDAP DB Task 1: Jan 18 12:08:21.927: 18:3d:a2:0a:ec:bc Returning AAA Success for mobile 18:3d:a2:0a:ec:bc
*LDAP DB Task 1: Jan 18 12:08:21.927: AuthorizationResponse: 0x33a5affc*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: Found context matching MAC address - 319
*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: (EAP:319) User credential callback invoked
*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: EAP Unable to find password in credentials. Skipped
*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: EAP Unable to find wlan in credentials. Skipped
*LDAP DB Task 1: Jan 18 12:08:21.928: Authenticated bind : Closing the binded session*LDAP DB Task 1: Jan 18 12:08:21.928: ldapClose [1] called lcapi_close (rc = 0 - Success)
*LDAP DB Task 1: Jan 18 12:08:21.929: LDAP server 1 changed state to IDLE
*EAP Framework: Jan 18 12:08:21.930: EAP-EVENT: Received event 'EAP_LL_REPLY' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Using credential profile name: ...(0x78000041)
*EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Maximum EAP packet size: 1000
*EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Sending method new context directive for EAP context 0x78000041
*EAP Framework: Jan 18 12:08:21.930: EAP-EVENT: Sending method directive 'New Context' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.930: eap_fast.c-EVENT: New context (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:21.931: id_manager.c-AUTH-SM: Got new ID f700000e - id_get
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c-EVENT: Allocated new EAP-FAST context (handle = 0xF700000E)
*EAP Framework: Jan 18 12:08:21.931: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:21.931: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Received Identity
*EAP Framework: Jan 18 12:08:21.931: eap_fast_tlv.c-AUTH-EVENT: Adding PAC A-ID TLV (436973636f0000000000000000000000)
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Sending Start
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-SM: Changing state: Reset -> Start
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c:138: Version: 1 Flags:S Length:0x0014
*EAP Framework: Jan 18 12:08:21.931: eap_core.c:1422: Payload: 00040010436973636F00000000000000 ...
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:21.931: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x001a Type:FAST
*EAP Framework: Jan 18 12:08:21.932: eap_core.c:1422: Payload: 2100040010436973636F000000000000 ...
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:21.932: eap_core.c:1484: Code:REQUEST ID:0x 2 Length:0x001a Type:FAST
*EAP Framework: Jan 18 12:08:21.932: eap_core.c:1422: Payload: 2100040010436973636F000000000000 ...
*EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.932: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:21.932: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:21.932: AuthorizationResponse: 0x13c713fc*EAP Framework: Jan 18 12:08:21.934: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 1a
*EAP Framework: Jan 18 12:08:21.934: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 2) to EAP subsys
*EAP Framework: Jan 18 12:08:22.291: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.291: eap_core.c:1484: Code:RESPONSE ID:0x 2 Length:0x0042 Type:FAST
*EAP Framework: Jan 18 12:08:22.291: eap_core.c:1422: Payload: 810000003816030100330100002F0301 ...
*EAP Framework: Jan 18 12:08:22.291: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.292: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.292: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
*EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-RX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.292: eap_core.c:1484: Code:RESPONSE ID:0x 2 Length:0x0042 Type:FAST
*EAP Framework: Jan 18 12:08:22.292: eap_core.c:1422: Payload: 810000003816030100330100002F0301 ...
*EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-AUTH-EVENT: Received TLS record type: Handshake in state: Start
*EAP
Framework: Jan 18 12:08:22.292: EAP-EVENT: Sending lower layer event
'EAP_GET_CREDENTIAL_PROFILE_FROM_PROFILE_NAME' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.292: LOCAL_AUTH: Found matching context for id - 319
*EAP
Framework: Jan 18 12:08:22.292: LOCAL_AUTH: (EAP:319) Returning profile
*EAP Framework: Jan 18 12:08:22.293: IOS_PKI_SHIM: [StartSession] - New session 0x335ee108 started (TP = 'vendor')
*EAP Framework: Jan 18 12:08:22.293: IOS_PKI_SHIM: [StartSession] - Trustpoint identity (cert) set to 'Vendor'
*EAP
Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Subject : ...
*EAP Framework: Jan 18
12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Issuer : ...
*EAP Framework: Jan 18
12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Valid from '2012 Jan 12th,
17:06:50 GMT' to '2016 Jan 11th, 17:06:50 GMT'
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Is not a CA cert
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: Added cert (type 1) to chain (1 present on chain)
*EAP
Framework: Jan 18 12:08:22.300: IOS_PKI_SHIM: [CA-CERT] Subject :
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Issuer : CN=...
*EAP
Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Valid from
'2012 Jan 12th, 16:54:49 GMT' to '2020 Jan 12th, 17:04:49 GMT'
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Is a CA cert
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: Added cert (type 2) to chain (2 present on chain)
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [StartSession] - Getting older style priv key
*EAP Framework: Jan 18 12:08:22.338: IOS_PKI_SHIM: Session 0x335ee108 init'd OK
*EAP Framework: Jan 18 12:08:22.338: eap_fast_auth.c-AUTH-EVENT: Local certificate found
*EAP Framework: Jan 18 12:08:22.339: eap_fast_auth.c-AUTH-EVENT: Reading Client Hello handshake
*EAP Framework: Jan 18 12:08:22.339: eap_fast.c:286: EAP-FAST-AUTH-RX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.339: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0033
*EAP Framework: Jan 18 12:08:22.339: eap_core.c:1422: Payload: 0100002F03014F16A8262631FC9DC042 ...
*EAP Framework: Jan 18 12:08:22.340: eap_fast.c:202: Handshake type:Client Hello Length:0x002F
*EAP Framework: Jan 18 12:08:22.340: eap_core.c:1422: Payload: 03014F16A8262631FC9DC042253D3E24 ...
*EAP Framework: Jan 18 12:08:22.340: eap_fast_auth.c-AUTH-EVENT: TLS_RSA_WITH_AES_128 proposed...
*EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA proposed...
*EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_RSA_WITH_RC4_128 proposed...
*EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_DH_anon_WITH_AES_128_CBC_SHA proposed...
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: Proposed ciphersuite(s):
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: TLS_RSA_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: TLS_RSA_WITH_RC4_128_SHA
*EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: TLS_DH_anon_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: Selected ciphersuite:
*EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.343: eap_fast_auth.c-AUTH-EVENT: Building Provisioning Server Hello
*EAP Framework: Jan 18 12:08:22.344: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.344: eap_fast.c:255: Content:Handshake Version:0301 Length:0x002A
*EAP Framework: Jan 18 12:08:22.344: eap_core.c:1422: Payload: 0200002603015F3325EADF12E6296F91 ...
*EAP Framework: Jan 18 12:08:22.344: eap_fast.c:202: Handshake type:Server Hello Length:0x0026
*EAP Framework: Jan 18 12:08:22.345: eap_core.c:1422: Payload: 03015F3325EADF12E6296F91530FE67F ...
*EAP Framework: Jan 18 12:08:22.345: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.345: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0B54
*EAP Framework: Jan 18 12:08:22.346: eap_core.c:1422: Payload: 0B000B50000B4D00059F3082059B3082 ...
*EAP Framework: Jan 18 12:08:22.346: eap_fast.c:202: Handshake type:Certificate Length:0x0B50
*EAP Framework: Jan 18 12:08:22.346: eap_core.c:1422: Payload: 000B4D00059F3082059B30820483A003 ...
*EAP Framework: Jan 18 12:08:22.347: eap_fast_crypto.c-EVENT: Starting Diffie Hellman phase 1 ...
*EAP Framework: Jan 18 12:08:22.661: eap_fast_crypto.c-EVENT: Diffie Hellman phase 1 complete
*EAP Framework: Jan 18 12:08:22.677: IOS_PKI_SHIM: PKI_SignMessage PostHashEncrypt ret SUCCESS.. op_len 128
*EAP Framework: Jan 18 12:08:22.678: eap_fast_auth.c-AUTH-EVENT: DH signature length = 128
*EAP Framework: Jan 18 12:08:22.678: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.678: eap_fast.c:255: Content:Handshake Version:0301 Length:0x028D
*EAP Framework: Jan 18 12:08:22.679: eap_core.c:1422: Payload: 0C0002890100FFFFFFFFFFFFFFFFC90F ...
*EAP Framework: Jan 18 12:08:22.679: eap_fast.c:202: Handshake type:Server Key Exchange Length:0x0289
*EAP Framework: Jan 18 12:08:22.679: eap_core.c:1422: Payload: 0100FFFFFFFFFFFFFFFFC90FDAA22168 ...
*EAP Framework: Jan 18 12:08:22.679: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.680: eap_fast.c:255: Content:Handshake Version:0301 Length:0x000B
*EAP Framework: Jan 18 12:08:22.680: eap_core.c:1422: Payload: 0D00000704030401020000
*EAP Framework: Jan 18 12:08:22.680: eap_fast.c:202: Handshake type:Certificate Request Length:0x0007
*EAP Framework: Jan 18 12:08:22.680: eap_core.c:1422: Payload: 04030401020000
*EAP Framework: Jan 18 12:08:22.681: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.681: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0004
*EAP Framework: Jan 18 12:08:22.681: eap_core.c:1422: Payload: 0E000000
*EAP Framework: Jan 18 12:08:22.681: eap_fast.c:202: Handshake type:Server Done Length:0x0000
*EAP Framework: Jan 18 12:08:22.682: eap_fast_auth.c-AUTH-EVENT: Sending Provisioning Serving Hello
*EAP Framework: Jan 18 12:08:22.682: eap_fast_auth.c-AUTH-SM: Changing state: Start -> Sent provisioning Server Hello
*EAP Framework: Jan 18 12:08:22.682: eap_fast.c-EVENT: Tx packet fragmentation required
*EAP Framework: Jan 18 12:08:22.683: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.683: eap_fast.c:138: Version: 1 Flags:LM Length:0x03DE
*EAP Framework: Jan 18 12:08:22.683: eap_core.c:1422: Payload: 160301002A0200002603015F3325EADF ...
*EAP Framework: Jan 18 12:08:22.684: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.684: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.684: eap_core.c:1422: Payload: C100000E33160301002A020000260301 ...
*EAP Framework: Jan 18 12:08:22.684: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.685: eap_core.c:1484: Code:REQUEST ID:0x 3 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.686: eap_core.c:1422: Payload: C100000E33160301002A020000260301 ...
*EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.686: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.687: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.687: AuthorizationResponse: 0x13c713fc*EAP Framework: Jan 18 12:08:22.755: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 297
*EAP Framework: Jan 18 12:08:22.755: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 6) to EAP subsys
*EAP Framework: Jan 18 12:08:22.831: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.831: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.831: eap_core.c:1484: Code:RESPONSE ID:0x 6 Length:0x015c Type:FAST
*EAP Framework: Jan 18 12:08:22.831: eap_core.c:1422: Payload: 810000015216030100070B0000030000 ...
*EAP Framework: Jan 18 12:08:22.831: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.831: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.832: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.832: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.832: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-RX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1484: Code:RESPONSE ID:0x 6 Length:0x015c Type:FAST
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422: Payload: 810000015216030100070B0000030000 ...
*EAP
Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Received
TLS record type: Handshake in state: Sent provisioning Server Hello
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Reading Client Certificate handshake
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c:286: EAP-FAST-AUTH-RX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0007
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422: Payload: 0B000003000000
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c:202: Handshake type:Certificate Length:0x0003
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422: Payload: 000000
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c-EVENT: Client Certificate handshake empty
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-EVENT: Rx'd I-ID: "EAP-FAST I-ID" from Peer Cert
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-ERROR: Required cert not provided by client
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:255: Content:Alert Version:0301 Length:0x0002
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422: Payload: 0228
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-SM: Changing state: Sent provisioning Server Hello -> Alert
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:138: Version: 1 Flags:L Length:0x0007
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422: Payload: 15030100020228
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x0011 Type:FAST
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422: Payload: 810000000715030100020228
*EAP Framework: Jan 18 12:08:22.833: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: EAP method decision: Fail
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.834: eap_core.c:1484: Code:REQUEST ID:0x 7 Length:0x0011 Type:FAST
*EAP Framework: Jan 18 12:08:22.834: eap_core.c:1422: Payload: 810000000715030100020228
*EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.834: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.834: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.834: AuthorizationResponse: 0x13c713fc
We think that the reason why it didn´t work, is the part:
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c-EVENT: Client Certificate handshake empty
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-EVENT: Rx'd I-ID: "EAP-FAST I-ID" from Peer Cert
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-ERROR: Required cert not provided by client
But we aren´t sure.
Maybe anyone can help us. Many thanks in advance.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.01.18 12:08:18 =~=~=~=~=~=~=~=~=~=~=~=
debug aaa all disable debug aaa all enable(Cisco Controller) >*Dot1x_NW_MsgTask_0: Jan 18 12:08:21.917: 18:3d:a2:0a:ec:bc Audit Session ID added to the mscb: 0a63081e000000994f16a825
*Dot1x_NW_MsgTask_0: Jan 18 12:08:21.917: Creating audit session ID (dot1x_aaa_eapresp_supp) and Radius Request
*aaaQueueReader: Jan 18 12:08:21.917: AuthenticationRequest: 0x30b52e90
*aaaQueueReader: Jan 18 12:08:21.917: Callback.....................................0x10b7803c*aaaQueueReader: Jan 18 12:08:21.917: protocolType.................................0x00140001*aaaQueueReader: Jan 18 12:08:21.917: proxyState...................................18:3D:A2:0A:EC:BC-02:00*aaaQueueReader: Jan 18 12:08:21.917: Packet contains 16 AVPs (not shown)*aaaQueueReader: Jan 18 12:08:21.917: 18:3d:a2:0a:ec:bc [Error] Client requested no retries for mobile 18:3D:A2:0A:EC:BC
*aaaQueueReader: Jan 18 12:08:21.918: 18:3d:a2:0a:ec:bc Returning AAA Error 'No Server' (-7) for mobile 18:3d:a2:0a:ec:bc
*aaaQueueReader: Jan 18 12:08:21.918: AuthorizationResponse: 0x3e04bd08
*aaaQueueReader: Jan 18 12:08:21.918: structureSize................................32*aaaQueueReader: Jan 18 12:08:21.918: resultCode...................................-7*aaaQueueReader: Jan 18 12:08:21.918: protocolUsed.................................0xffffffff*aaaQueueReader: Jan 18 12:08:21.918: proxyState...................................18:3D:A2:0A:EC:BC-02:00*aaaQueueReader: Jan 18 12:08:21.918: Packet contains 0 AVPs:*aaaQueueReader: Jan 18 12:08:21.918: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:21.918: LOCAL_AUTH: Creating new context
*aaaQueueReader: Jan 18 12:08:21.918: EAP-EVENT: Received context create from lower layer (0x0000013F)
*aaaQueueReader: Jan 18 12:08:21.918: id_manager.c-AUTH-SM: Got new ID 78000041 - id_get
*aaaQueueReader: Jan 18 12:08:21.918: EAP-EVENT: Received credential profile name: "(null)" from LL
*aaaQueueReader: Jan 18 12:08:21.918: EAP-EVENT: Allocated new EAP context (handle = 0x78000041)
*aaaQueueReader: Jan 18 12:08:21.919: LOCAL_AUTH: Created new context eap session handle 78000041
*aaaQueueReader: Jan 18 12:08:21.919: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 1) to EAP subsys
*EAP Framework: Jan 18 12:08:21.919: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.920: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:21.920: eap_core.c:1484: Code:RESPONSE ID:0x 1 Length:0x002b Type:IDENTITY
*EAP Framework: Jan 18 12:08:21.920: eap_core.c:1422: Payload: 416E6472652E54736368656E74736368 ...
*EAP Framework: Jan 18 12:08:21.920: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:21.920: EAP-AUTH-EVENT: EAP Response type = Identity
*EAP Framework: Jan 18 12:08:21.920: EAP-AUTH-EVENT: Received peer identity: [email protected]
*EAP Framework: Jan 18 12:08:21.920: EAP-EVENT: Sending lower layer event 'EAP_GET_CREDENTIAL_PROFILE_FROM_USERNAME' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.920: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:21.921: LOCAL_AUTH: (EAP) Sending user credential request username '[email protected]' to LDAP
*aaaQueueReader: Jan 18 12:08:21.921: AuthenticationRequest: 0x33a6ae18
*aaaQueueReader: Jan 18 12:08:21.921: Callback.....................................0x10765234*aaaQueueReader: Jan 18 12:08:21.921: protocolType.................................0x00100002*aaaQueueReader: Jan 18 12:08:21.921: proxyState...................................18:3D:A2:0A:EC:BC-00:00*aaaQueueReader: Jan 18 12:08:21.921: Packet contains 2 AVPs (not shown)*EAP Framework: Jan 18 12:08:21.921: EAP-AUTH-EVENT: Waiting for asynchronous reply from LL
*LDAP DB Task 1: Jan 18 12:08:21.921: ldapTask [1] received msg 'REQUEST' (2) in state 'IDLE' (1)
*LDAP DB Task 1: Jan 18 12:08:21.922: LDAP server 1 changed state to INIT
*LDAP DB Task 1: Jan 18 12:08:21.922: LDAP_OPT_REFERRALS = -1*LDAP DB Task 1: Jan 18 12:08:21.922: ldapInitAndBind [1] called lcapi_init (rc = 0 - Success)
*LDAP DB Task 1: Jan 18 12:08:21.925: ldapInitAndBind [1] configured Method Authenticated lcapi_bind (rc = 0 - Success)
*LDAP DB Task 1: Jan 18 12:08:21.925: LDAP server 1 changed state to CONNECTED
*LDAP DB Task 1: Jan 18 12:08:21.925: disabled LDAP_OPT_REFERRALS*LDAP DB Task 1: Jan 18 12:08:21.925: LDAP_CLIENT: UID Search (base=DC=group,DC=jenoptik,DC=corp, pattern=(&(objectclass=Person)([email protected])))
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: ldap_search_ext_s returns 0 85
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Returned 2 msgs including 0 references
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Returned msg 1 type 0x64
*LDAP DB Task 1: Jan 18 12:08:21.926: LDAP_CLIENT: Received 1 attributes in search entry msg
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT: Returned msg 2 type 0x65
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT : No matched DN
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT : Check result error 0 rc 1013
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP_CLIENT: Received no referrals in search result msg
*LDAP DB Task 1: Jan 18 12:08:21.927: ldapAuthRequest [1] called lcapi_query base="DC=group,DC=jenoptik,DC=corp" type="Person" attr="userPrincipalName" user="[email protected]" (rc = 0 - Success)
*LDAP DB Task 1: Jan 18 12:08:21.927: LDAP ATTR> dn = CN=Tschentscher\, Andre,OU=Users,OU=SSC,OU=JOAG,DC=group,DC=jenoptik,DC=corp (size 76)
*LDAP DB Task 1: Jan 18 12:08:21.927: Handling LDAP response Success
*LDAP DB Task 1: Jan 18 12:08:21.927: 18:3d:a2:0a:ec:bc [Response] Client requested no retries for mobile 18:3D:A2:0A:EC:BC
*LDAP DB Task 1: Jan 18 12:08:21.927: 18:3d:a2:0a:ec:bc Returning AAA Success for mobile 18:3d:a2:0a:ec:bc
*LDAP DB Task 1: Jan 18 12:08:21.927: AuthorizationResponse: 0x33a5affc
*LDAP DB Task 1: Jan 18 12:08:21.927: structureSize................................180*LDAP DB Task 1: Jan 18 12:08:21.927: resultCode...................................0*LDAP DB Task 1: Jan 18 12:08:21.927: protocolUsed.................................0x00000002*LDAP DB Task 1: Jan 18 12:08:21.927: proxyState...................................18:3D:A2:0A:EC:BC-00:00*LDAP DB Task 1: Jan 18 12:08:21.928: Packet contains 2 AVPs:*LDAP DB Task 1: Jan 18 12:08:21.928: AVP[01] Unknown Attribute 0......................CN=Tschentscher\, Andre,OU=Users,OU=SSC,OU=JOAG,DC=group,DC=jenoptik,DC=corp (76 bytes)*LDAP DB Task 1: Jan 18 12:08:21.928: AVP[02] User-Name................................Andre.Tschentscher@group.jenoptik.corp (38 bytes)*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: Found context matching MAC address - 319
*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: (EAP:319) User credential callback invoked
*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: EAP Unable to find password in credentials. Skipped
*LDAP DB Task 1: Jan 18 12:08:21.928: LOCAL_AUTH: EAP Unable to find wlan in credentials. Skipped
*LDAP DB Task 1: Jan 18 12:08:21.928: Authenticated bind : Closing the binded session*LDAP DB Task 1: Jan 18 12:08:21.928: ldapClose [1] called lcapi_close (rc = 0 - Success)
*LDAP DB Task 1: Jan 18 12:08:21.929: LDAP server 1 changed state to IDLE
*EAP Framework: Jan 18 12:08:21.930: EAP-EVENT: Received event 'EAP_LL_REPLY' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Using credential profile name: [email protected] (0x78000041)
*EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Maximum EAP packet size: 1000
*EAP Framework: Jan 18 12:08:21.930: EAP-AUTH-EVENT: Sending method new context directive for EAP context 0x78000041
*EAP Framework: Jan 18 12:08:21.930: EAP-EVENT: Sending method directive 'New Context' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.930: eap_fast.c-EVENT: New context (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:21.931: id_manager.c-AUTH-SM: Got new ID f700000e - id_get
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c-EVENT: Allocated new EAP-FAST context (handle = 0xF700000E)
*EAP Framework: Jan 18 12:08:21.931: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:21.931: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Received Identity
*EAP Framework: Jan 18 12:08:21.931: eap_fast_tlv.c-AUTH-EVENT: Adding PAC A-ID TLV (436973636f0000000000000000000000)
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-EVENT: Sending Start
*EAP Framework: Jan 18 12:08:21.931: eap_fast_auth.c-AUTH-SM: Changing state: Reset -> Start
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c:138: Version: 1 Flags:S Length:0x0014
*EAP Framework: Jan 18 12:08:21.931: eap_core.c:1422: Payload: 00040010436973636F00000000000000 ...
*EAP Framework: Jan 18 12:08:21.931: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:21.931: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x001a Type:FAST
*EAP Framework: Jan 18 12:08:21.932: eap_core.c:1422: Payload: 2100040010436973636F000000000000 ...
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:21.932: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:21.932: eap_core.c:1484: Code:REQUEST ID:0x 2 Length:0x001a Type:FAST
*EAP Framework: Jan 18 12:08:21.932: eap_core.c:1422: Payload: 2100040010436973636F000000000000 ...
*EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:21.932: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:21.932: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:21.932: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:21.932: AuthorizationResponse: 0x13c713fc
*EAP Framework: Jan 18 12:08:21.933: structureSize................................74*EAP Framework: Jan 18 12:08:21.933: resultCode...................................255*EAP Framework: Jan 18 12:08:21.933: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:21.933: proxyState...................................18:3D:A2:0A:EC:BC-02:00*EAP Framework: Jan 18 12:08:21.934: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:21.934: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 1a
*EAP Framework: Jan 18 12:08:21.934: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.290: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 2) to EAP subsys
*EAP Framework: Jan 18 12:08:22.291: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.291: eap_core.c:1484: Code:RESPONSE ID:0x 2 Length:0x0042 Type:FAST
*EAP Framework: Jan 18 12:08:22.291: eap_core.c:1422: Payload: 810000003816030100330100002F0301 ...
*EAP Framework: Jan 18 12:08:22.291: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.291: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.292: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.292: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
*EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-RX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.292: eap_core.c:1484: Code:RESPONSE ID:0x 2 Length:0x0042 Type:FAST
*EAP Framework: Jan 18 12:08:22.292: eap_core.c:1422: Payload: 810000003816030100330100002F0301 ...
*EAP Framework: Jan 18 12:08:22.292: eap_fast_auth.c-AUTH-EVENT: Received TLS record type: Handshake in state: Start
*EAP Framework: Jan 18 12:08:22.292: EAP-EVENT: Sending lower layer event 'EAP_GET_CREDENTIAL_PROFILE_FROM_PROFILE_NAME' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.292: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.292: LOCAL_AUTH: (EAP:319) Returning profile '[email protected]' (username '[email protected]')
*EAP Framework: Jan 18 12:08:22.293: IOS_PKI_SHIM: [StartSession] - New session 0x335ee108 started (TP = 'vendor')
*EAP Framework: Jan 18 12:08:22.293: IOS_PKI_SHIM: [StartSession] - Trustpoint identity (cert) set to 'Vendor'
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Subject : C=DE, ST=Thuringia, L=Jena, O=Jenoptik AG, OU=Jenoptik SSC GmbH, CN=Cisco WLC 1st, [email protected]
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Issuer : DC=corp, DC=jenoptik, CN=Jenoptik WLAN Certificate Authority
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Valid from '2012 Jan 12th, 17:06:50 GMT' to '2016 Jan 11th, 17:06:50 GMT'
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: [ID-CERT] Is not a CA cert
*EAP Framework: Jan 18 12:08:22.297: IOS_PKI_SHIM: Added cert (type 1) to chain (1 present on chain)
*EAP Framework: Jan 18 12:08:22.300: IOS_PKI_SHIM: [CA-CERT] Subject : DC=corp, DC=jenoptik, CN=Jenoptik WLAN Certificate Authority
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Issuer : CN=Jenoptik Certificate Authority
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Valid from '2012 Jan 12th, 16:54:49 GMT' to '2020 Jan 12th, 17:04:49 GMT'
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [CA-CERT] Is a CA cert
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: Added cert (type 2) to chain (2 present on chain)
*EAP Framework: Jan 18 12:08:22.301: IOS_PKI_SHIM: [StartSession] - Getting older style priv key
*EAP Framework: Jan 18 12:08:22.338: IOS_PKI_SHIM: Session 0x335ee108 init'd OK
*EAP Framework: Jan 18 12:08:22.338: eap_fast_auth.c-AUTH-EVENT: Local certificate found
*EAP Framework: Jan 18 12:08:22.339: eap_fast_auth.c-AUTH-EVENT: Reading Client Hello handshake
*EAP Framework: Jan 18 12:08:22.339: eap_fast.c:286: EAP-FAST-AUTH-RX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.339: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0033
*EAP Framework: Jan 18 12:08:22.339: eap_core.c:1422: Payload: 0100002F03014F16A8262631FC9DC042 ...
*EAP Framework: Jan 18 12:08:22.340: eap_fast.c:202: Handshake type:Client Hello Length:0x002F
*EAP Framework: Jan 18 12:08:22.340: eap_core.c:1422: Payload: 03014F16A8262631FC9DC042253D3E24 ...
*EAP Framework: Jan 18 12:08:22.340: eap_fast_auth.c-AUTH-EVENT: TLS_RSA_WITH_AES_128 proposed...
*EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA proposed...
*EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_RSA_WITH_RC4_128 proposed...
*EAP Framework: Jan 18 12:08:22.341: eap_fast_auth.c-AUTH-EVENT: TLS_DH_anon_WITH_AES_128_CBC_SHA proposed...
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: Proposed ciphersuite(s):
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: TLS_RSA_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.342: eap_fast.c-EVENT: TLS_RSA_WITH_RC4_128_SHA
*EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: TLS_DH_anon_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: Selected ciphersuite:
*EAP Framework: Jan 18 12:08:22.343: eap_fast.c-EVENT: TLS_DHE_RSA_WITH_AES_128_CBC_SHA
*EAP Framework: Jan 18 12:08:22.343: eap_fast_auth.c-AUTH-EVENT: Building Provisioning Server Hello
*EAP Framework: Jan 18 12:08:22.344: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.344: eap_fast.c:255: Content:Handshake Version:0301 Length:0x002A
*EAP Framework: Jan 18 12:08:22.344: eap_core.c:1422: Payload: 0200002603015F3325EADF12E6296F91 ...
*EAP Framework: Jan 18 12:08:22.344: eap_fast.c:202: Handshake type:Server Hello Length:0x0026
*EAP Framework: Jan 18 12:08:22.345: eap_core.c:1422: Payload: 03015F3325EADF12E6296F91530FE67F ...
*EAP Framework: Jan 18 12:08:22.345: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.345: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0B54
*EAP Framework: Jan 18 12:08:22.346: eap_core.c:1422: Payload: 0B000B50000B4D00059F3082059B3082 ...
*EAP Framework: Jan 18 12:08:22.346: eap_fast.c:202: Handshake type:Certificate Length:0x0B50
*EAP Framework: Jan 18 12:08:22.346: eap_core.c:1422: Payload: 000B4D00059F3082059B30820483A003 ...
*EAP Framework: Jan 18 12:08:22.347: eap_fast_crypto.c-EVENT: Starting Diffie Hellman phase 1 ...
*EAP Framework: Jan 18 12:08:22.661: eap_fast_crypto.c-EVENT: Diffie Hellman phase 1 complete
*EAP Framework: Jan 18 12:08:22.677: IOS_PKI_SHIM: PKI_SignMessage PostHashEncrypt ret SUCCESS.. op_len 128
*EAP Framework: Jan 18 12:08:22.678: eap_fast_auth.c-AUTH-EVENT: DH signature length = 128
*EAP Framework: Jan 18 12:08:22.678: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.678: eap_fast.c:255: Content:Handshake Version:0301 Length:0x028D
*EAP Framework: Jan 18 12:08:22.679: eap_core.c:1422: Payload: 0C0002890100FFFFFFFFFFFFFFFFC90F ...
*EAP Framework: Jan 18 12:08:22.679: eap_fast.c:202: Handshake type:Server Key Exchange Length:0x0289
*EAP Framework: Jan 18 12:08:22.679: eap_core.c:1422: Payload: 0100FFFFFFFFFFFFFFFFC90FDAA22168 ...
*EAP Framework: Jan 18 12:08:22.679: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.680: eap_fast.c:255: Content:Handshake Version:0301 Length:0x000B
*EAP Framework: Jan 18 12:08:22.680: eap_core.c:1422: Payload: 0D00000704030401020000
*EAP Framework: Jan 18 12:08:22.680: eap_fast.c:202: Handshake type:Certificate Request Length:0x0007
*EAP Framework: Jan 18 12:08:22.680: eap_core.c:1422: Payload: 04030401020000
*EAP Framework: Jan 18 12:08:22.681: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.681: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0004
*EAP Framework: Jan 18 12:08:22.681: eap_core.c:1422: Payload: 0E000000
*EAP Framework: Jan 18 12:08:22.681: eap_fast.c:202: Handshake type:Server Done Length:0x0000
*EAP Framework: Jan 18 12:08:22.682: eap_fast_auth.c-AUTH-EVENT: Sending Provisioning Serving Hello
*EAP Framework: Jan 18 12:08:22.682: eap_fast_auth.c-AUTH-SM: Changing state: Start -> Sent provisioning Server Hello
*EAP Framework: Jan 18 12:08:22.682: eap_fast.c-EVENT: Tx packet fragmentation required
*EAP Framework: Jan 18 12:08:22.683: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.683: eap_fast.c:138: Version: 1 Flags:LM Length:0x03DE
*EAP Framework: Jan 18 12:08:22.683: eap_core.c:1422: Payload: 160301002A0200002603015F3325EADF ...
*EAP Framework: Jan 18 12:08:22.684: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.684: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.684: eap_core.c:1422: Payload: C100000E33160301002A020000260301 ...
*EAP Framework: Jan 18 12:08:22.684: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.685: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.685: eap_core.c:1484: Code:REQUEST ID:0x 3 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.686: eap_core.c:1422: Payload: C100000E33160301002A020000260301 ...
*EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.686: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.686: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.687: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.687: AuthorizationResponse: 0x13c713fc
*EAP Framework: Jan 18 12:08:22.687: structureSize................................1048*EAP Framework: Jan 18 12:08:22.687: resultCode...................................255*EAP Framework: Jan 18 12:08:22.687: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.688: proxyState...................................18:3D:A2:0A:EC:BC-02:01*EAP Framework: Jan 18 12:08:22.688: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.688: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 3e8
*EAP Framework: Jan 18 12:08:22.688: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.700: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.701: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.701: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 3) to EAP subsys
*EAP Framework: Jan 18 12:08:22.701: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.701: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.702: eap_core.c:1484: Code:RESPONSE ID:0x 3 Length:0x0006 Type:FAST
*EAP Framework: Jan 18 12:08:22.702: eap_core.c:1422: Payload: 01
*EAP Framework: Jan 18 12:08:22.702: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.703: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.703: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.703: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.704: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.704: eap_fast.c-AUTH-EVENT: eap_fast_rx_packet(): EAP Fast NoData (0x2b)
*EAP Framework: Jan 18 12:08:22.704: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.704: eap_fast.c:138: Version: 1 Flags:M Length:0x03E2
*EAP Framework: Jan 18 12:08:22.705: eap_core.c:1422: Payload: 3A2F2F2F434E3D4A656E6F7074696B25 ...
*EAP Framework: Jan 18 12:08:22.705: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.705: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.705: eap_core.c:1422: Payload: 413A2F2F2F434E3D4A656E6F7074696B ...
*EAP Framework: Jan 18 12:08:22.706: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.706: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:22.706: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.706: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.707: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.707: eap_core.c:1484: Code:REQUEST ID:0x 4 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.707: eap_core.c:1422: Payload: 413A2F2F2F434E3D4A656E6F7074696B ...
*EAP Framework: Jan 18 12:08:22.707: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.708: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.708: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.708: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.708: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.709: AuthorizationResponse: 0x13c713fc
*EAP Framework: Jan 18 12:08:22.709: structureSize................................1048*EAP Framework: Jan 18 12:08:22.709: resultCode...................................255*EAP Framework: Jan 18 12:08:22.709: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.710: proxyState...................................18:3D:A2:0A:EC:BC-02:02*EAP Framework: Jan 18 12:08:22.710: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.710: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 3e8
*EAP Framework: Jan 18 12:08:22.711: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.723: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.723: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.724: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 4) to EAP subsys
*EAP Framework: Jan 18 12:08:22.724: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.725: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.725: eap_core.c:1484: Code:RESPONSE ID:0x 4 Length:0x0006 Type:FAST
*EAP Framework: Jan 18 12:08:22.725: eap_core.c:1422: Payload: 01
*EAP Framework: Jan 18 12:08:22.725: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.726: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.726: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.726: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.726: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.727: eap_fast.c-AUTH-EVENT: eap_fast_rx_packet(): EAP Fast NoData (0x2b)
*EAP Framework: Jan 18 12:08:22.727: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.727: eap_fast.c:138: Version: 1 Flags:M Length:0x03E2
*EAP Framework: Jan 18 12:08:22.728: eap_core.c:1422: Payload: BD84CC4BF49A766267DA94429BEBE087 ...
*EAP Framework: Jan 18 12:08:22.728: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.728: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.728: eap_core.c:1422: Payload: 41BD84CC4BF49A766267DA94429BEBE0 ...
*EAP Framework: Jan 18 12:08:22.729: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.729: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:22.729: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.729: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.730: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.730: eap_core.c:1484: Code:REQUEST ID:0x 5 Length:0x03e8 Type:FAST
*EAP Framework: Jan 18 12:08:22.730: eap_core.c:1422: Payload: 41BD84CC4BF49A766267DA94429BEBE0 ...
*EAP Framework: Jan 18 12:08:22.731: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.731: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.731: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.731: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.732: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.732: AuthorizationResponse: 0x13c713fc
*EAP Framework: Jan 18 12:08:22.732: structureSize................................1048*EAP Framework: Jan 18 12:08:22.732: resultCode...................................255*EAP Framework: Jan 18 12:08:22.733: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.733: proxyState...................................18:3D:A2:0A:EC:BC-02:03*EAP Framework: Jan 18 12:08:22.733: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.734: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 3e8
*EAP Framework: Jan 18 12:08:22.734: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.746: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.747: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.747: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 5) to EAP subsys
*EAP Framework: Jan 18 12:08:22.747: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.747: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.748: eap_core.c:1484: Code:RESPONSE ID:0x 5 Length:0x0006 Type:FAST
*EAP Framework: Jan 18 12:08:22.748: eap_core.c:1422: Payload: 01
*EAP Framework: Jan 18 12:08:22.748: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.749: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.749: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.749: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.750: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.750: eap_fast.c-AUTH-EVENT: eap_fast_rx_packet(): EAP Fast NoData (0x2b)
*EAP Framework: Jan 18 12:08:22.750: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.750: eap_fast.c:138: Version: 1 Flags: Length:0x0291
*EAP Framework: Jan 18 12:08:22.751: eap_core.c:1422: Payload: 34C4C6628B80DC1CD129024E088A67CC ...
*EAP Framework: Jan 18 12:08:22.751: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.751: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x0297 Type:FAST
*EAP Framework: Jan 18 12:08:22.751: eap_core.c:1422: Payload: 0134C4C6628B80DC1CD129024E088A67 ...
*EAP Framework: Jan 18 12:08:22.751: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.751: EAP-AUTH-EVENT: EAP method decision: Unknown
*EAP Framework: Jan 18 12:08:22.752: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.752: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.752: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.752: eap_core.c:1484: Code:REQUEST ID:0x 6 Length:0x0297 Type:FAST
*EAP Framework: Jan 18 12:08:22.752: eap_core.c:1422: Payload: 0134C4C6628B80DC1CD129024E088A67 ...
*EAP Framework: Jan 18 12:08:22.753: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.753: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.753: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.753: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.753: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.754: AuthorizationResponse: 0x13c713fc
*EAP Framework: Jan 18 12:08:22.754: structureSize................................711*EAP Framework: Jan 18 12:08:22.754: resultCode...................................255*EAP Framework: Jan 18 12:08:22.754: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.754: proxyState...................................18:3D:A2:0A:EC:BC-02:04*EAP Framework: Jan 18 12:08:22.754: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.755: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 297
*EAP Framework: Jan 18 12:08:22.755: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.830: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 6) to EAP subsys
*EAP Framework: Jan 18 12:08:22.831: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.831: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.831: eap_core.c:1484: Code:RESPONSE ID:0x 6 Length:0x015c Type:FAST
*EAP Framework: Jan 18 12:08:22.831: eap_core.c:1422: Payload: 810000015216030100070B0000030000 ...
*EAP Framework: Jan 18 12:08:22.831: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.831: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.832: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.832: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.832: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-RX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1484: Code:RESPONSE ID:0x 6 Length:0x015c Type:FAST
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422: Payload: 810000015216030100070B0000030000 ...
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Received TLS record type: Handshake in state: Sent provisioning Server Hello
*EAP Framework: Jan 18 12:08:22.832: eap_fast_auth.c-AUTH-EVENT: Reading Client Certificate handshake
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c:286: EAP-FAST-AUTH-RX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c:255: Content:Handshake Version:0301 Length:0x0007
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422: Payload: 0B000003000000
*EAP Framework: Jan 18 12:08:22.832: eap_fast.c:202: Handshake type:Certificate Length:0x0003
*EAP Framework: Jan 18 12:08:22.832: eap_core.c:1422: Payload: 000000
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c-EVENT: Client Certificate handshake empty
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-EVENT: Rx'd I-ID: "EAP-FAST I-ID" from Peer Cert
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-ERROR: Required cert not provided by client
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:286: EAP-FAST-AUTH-TX-TLS-RECORD:
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:255: Content:Alert Version:0301 Length:0x0002
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422: Payload: 0228
*EAP Framework: Jan 18 12:08:22.833: eap_fast_auth.c-AUTH-SM: Changing state: Sent provisioning Server Hello -> Alert
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:2367: eap-fast tx packet:
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c:138: Version: 1 Flags:L Length:0x0007
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422: Payload: 15030100020228
*EAP Framework: Jan 18 12:08:22.833: eap_fast.c-TX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1484: Code:REQUEST ID:0x 0 Length:0x0011 Type:FAST
*EAP Framework: Jan 18 12:08:22.833: eap_core.c:1422: Payload: 810000000715030100020228
*EAP Framework: Jan 18 12:08:22.833: EAP-AUTH-EVENT: EAP method state: Continue
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: EAP method decision: Fail
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: Current method = 43
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-EVENT: Sending packet to lower layer for context 0x78000041
*EAP Framework: Jan 18 12:08:22.834: EAP-AUTH-TX-PAK:
*EAP Framework: Jan 18 12:08:22.834: eap_core.c:1484: Code:REQUEST ID:0x 7 Length:0x0011 Type:FAST
*EAP Framework: Jan 18 12:08:22.834: eap_core.c:1422: Payload: 810000000715030100020228
*EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Started 'Authenticator Retransmit' timer (60) for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Started EAP tick timer
*EAP Framework: Jan 18 12:08:22.834: EAP-EVENT: Sending lower layer event 'EAP_TX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.834: LOCAL_AUTH: Found matching context for id - 319
*EAP Framework: Jan 18 12:08:22.834: LOCAL_AUTH: (EAP:319) transmit event
*EAP Framework: Jan 18 12:08:22.834: AuthorizationResponse: 0x13c713fc
*EAP Framework: Jan 18 12:08:22.834: structureSize................................65*EAP Framework: Jan 18 12:08:22.834: resultCode...................................255*EAP Framework: Jan 18 12:08:22.835: protocolUsed.................................0x00000080*EAP Framework: Jan 18 12:08:22.835: proxyState...................................18:3D:A2:0A:EC:BC-02:05*EAP Framework: Jan 18 12:08:22.835: Packet contains 1 AVPs (not shown)*EAP Framework: Jan 18 12:08:22.835: LOCAL_AUTH: AAA LOCAL AUTH EAP PKT AVP attribute 4f length 11
*EAP Framework: Jan 18 12:08:22.835: LOCAL_AUTH: AAA LOCAL AUTH TX PKT DUMP code cc id 00 type 2b
*aaaQueueReader: Jan 18 12:08:22.838: LOCAL_AUTH: EAP: Received an auth request
*aaaQueueReader: Jan 18 12:08:22.838: LOCAL_AUTH: Found context matching MAC address - 319
*aaaQueueReader: Jan 18 12:08:22.838: LOCAL_AUTH: (EAP:319) Sending the Rxd EAP packet (id 7) to EAP subsys
*EAP Framework: Jan 18 12:08:22.838: EAP-EVENT: Received event 'EAP_RX_PACKET' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.839: EAP-AUTH-RX-PAK:
*EAP Framework: Jan 18 12:08:22.839: eap_core.c:1484: Code:RESPONSE ID:0x 7 Length:0x0006 Type:FAST
*EAP Framework: Jan 18 12:08:22.839: eap_core.c:1422: Payload: 01
*EAP Framework: Jan 18 12:08:22.839: EAP-EVENT: Stopping 'Authenticator Retransmit' timer for EAP session handle 0x78000041
*EAP Framework: Jan 18 12:08:22.839: EAP-AUTH-EVENT: EAP Response received by context 0x78000041
*EAP Framework: Jan 18 12:08:22.839: EAP-AUTH-EVENT: EAP Response type = Method (43)
*EAP Framework: Jan 18 12:08:22.839: EAP-AUTH-EVENT: Sending method data for context 0x78000041
*EAP Framework: Jan 18 12:08:22.839: EAP-EVENT: Sending method directive 'Receive Packet' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.839: eap_fast.c-AUTH-EVENT: eap_fast_rx_packet(): EAP Fast NoData (0x2b)
*EAP Framework: Jan 18 12:08:22.840: eap_fast.c-AUTH-EVENT: Process Response, type: 0x2b
*EAP Framework: Jan 18 12:08:22.840: eap_fast_auth.c-AUTH-EVENT: Process Response (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:22.840: eap_fast_auth.c-RX-AUTH-PAK:
*EAP Framework: Jan 18 12:08:22.840: eap_core.c:1484: Code:RESPONSE ID:0x 7 Length:0x0006 Type:FAST
*EAP Framework: Jan 18 12:08:22.840: eap_core.c:1422: Payload: 01
*EAP Framework: Jan 18 12:08:22.840: eap_fast_auth.c-AUTH-EVENT: Received ACK from peer
*EAP Framework: Jan 18 12:08:22.840: EAP-AUTH-EVENT: EAP method state: Done
*EAP Framework: Jan 18 12:08:22.840: EAP-AUTH-EVENT: EAP method decision: Fail
*EAP Framework: Jan 18 12:08:22.840: EAP-EVENT: Received get canned status from lower layer (0x78000041)
*EAP Framework: Jan 18 12:08:22.840: EAP-EVENT: Sending method directive 'Free Context' on handle 0x78000041
*EAP Framework: Jan 18 12:08:22.840: eap_fast.c-EVENT: Free context (EAP handle = 0x78000041)
*EAP Framework: Jan 18 12:08:22.840: id_manager.c-AUTH-SM: Entry deleted fine id f700000e - id_delete
*EAP Framework: Jan 18 12:08:22.840: IOS_PKI_SHIM: Session 0x335ee108 deleted
*EAP Framework: Jan 18 12:08:2Now we found the reason.
The WLC doesn´t work with the Sub CA respectively with chain certificates for device authentication.
"Support for Chained Certificate
In controller versions earlier than 5.1.151.0, web authentication certificates can be only device certificates and should not contain the CA roots chained to the device certificate (no chained certificates).
With controller version 5.1.151.0 and later, the controller allows for the device certificate to be downloaded as a chained certificate for web authentication.
Certificate Levels
Level 0—Use of only a server certificate on WLC.
Level 1—Use of server certificate on WLC and a CA root certificate.
Level 2—Use of server certificate on WLC, one single CA intermediate certificate, and a CA root certificate.
Level 3—Use of server certificate on WLC, two CA intermediate certificates, and a CA root certificate.
WLC does not support chained certificates more than 10KB size on the WLC.
Note: Chained certificates are supported for web authentication only; they are not supported for the management certificate."
So the WLC can´t decode the peer certificate. -
Problem with dreamweaver and Flash
Hi, maybe someone can help me, i have any problem with
dreamweaver and flash, i have a page and i have a menu and
sub-menu, and the same page i have a category en flash 550 x 700 (
photography and more... ) but when the menu to unfold
the menu to see under flash and it cant see ( sorry my
english is bad.... i hope you can understand me, and help me.. )
i dont now why always flash ever stay up, or first, and
another information under flash... this a problem... if you have
menus...
thanks.... have nice day.....This is a drawback of using flash or any other active
content. By default, all active content including flash will
display over every other content and thats why your menu stays
under the flash movie. Some people make the flash background
transparent to show content under the flash movie, but that will
not work for menu items.
I would suggest that you make the menu such that it does not
overlap with the flash movie. -
problem with vista and 5. i install my old audigy 2 zs exp pro with DTT2500 speaker
In my new pc.
i install vista 64 and SBAX_PCDRV_LB_2_8_000 driver from creative site.
when i go to control panel/sound and test the 5. surrund ' iget only the two front speaker.
why is that?
i try to play a song from vista folder "Distance" and i get all 5 +sub to play.
do i miss something?
is the test worg and with another test i can get all spedajer to work or the driver is not good?
thanks for all you help
last update...
i can get 4 speaker when i use the fourpoint mode on the desktop theather 5. dtt2500 digital,
but in movie mode i get only 2 front speaker.
i use the digital out from the sound blaster.
Message Edited by raflevi on 05-4-2009 02:38 [email protected]My apologies about not explaining further about disabling SPDIF passthrough. See the steps below to enable DDL encoding.
***Before proceeding please make sure that you've purchased, installed and activated the DDL pack***
. Open Creative Audio Console, go to the Decoder tab to disable driver level encoding and enable SPDIF passthrough (this is done by selecting SPDIF passthrough or any similar option that enable the use of an external decoder) instead of using the built-in decoders.
2. Open up your playback devices window (right click on the speaker icon on the taskbar and select playback devices) and set analog speakers (not SPDIF) as your default device. This is VERY IMPORTANT step, or else you get the "the device is busy" error when enbaling DDL encoding.
3. In the Audio Console, select the Encoder tab and enable DLL encoding.
Note:
When DDL encoding is enabled, it makes exclusi've use of your SPDIF connection so, no passthrough is possible. The default output format when using DDL encoding is 48KHz/6 bits. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) when DLL encoding is enabled, then please change their output device to analog speakers instead of SPDIF.
To use back SPDIF passthrough (when playing back media with a pre-encoded audio source), open up Audio Console and disable DDL encoding and in the Playback Devices window change the default device to SPDIF. If you make use of any AC3 audio filters (such as ac3filter/others included in codec packs/media player softwares) then please change their output device back to SPDIF. You may also wish to change back your output format to 92KHz/24 bits (right click on SPDIF and select properties -> Advanced tab).
raflevi wrote:
when you said to install ddl? pack you mean the "[url="http://buy.soundblaster.com/_creativelabsstore/cgi-bin/pd.cgi?page=product_detail&category=Software&pid=F 2222SR6PAKH5DGY6SD">Dolby Digital Li've Pack - SB Audigy Series[/url] "?
thanks again for all your help.
i wanted to use the 5. function mostly for games
Yes... also please see the link in my previous post.
Hope this answers your questions.
Maybe you are looking for
-
Text is small. I hit something by mistake
I have a HP laptop. I am not computer savy. I hit something my mistake and now everything is super small. I did this once before and everything was large. I feel like Alice in Wonderland. This question was solved. View Solution.
-
I have apple 4s and the operating system is iOS 5.1.1 got the update message of iOS 6. if update the iOS 6, other functions will work unchanging?
-
Is there a way to convert 24 bit tTIFF files to 8 bit JPEGS
Many months ago I scanned several hundred slides into TIFF format. When I look at the details of the file, they have a bit depth of 24. Is there any way to use Elements 6 to save these files to JPEG format with only an 8 bit colour depth?
-
IDVD crash after rendering for 1 movie
I created several DVD so far it was perfect. I am using the same method and format or codec that I was using for all previous movies. This one seems perfect within iDVD but when I try to burn disk image it quits unexpectedly after rendering the proje
-
Grainy horrible picture shot with Sony FX7 when capturing
Please help...I shot 15 hours of footage with my new FX7 and am importing it to Final Cut Pro (6.0.2). I shot as HDV. The picture quality looks awful on iMac screen. It is grainy, not at all like it looks like on a FX7 screen. I connected the camera