Problem with memo field displaying

I have a table in MS access with a memo field. Everything the
user inputs in the field is recorded in the table. When I try to
output the memo field I am on getting part of the field. Attached
is the code for displaying the data from the acty_comments field.
Also below is the actual data that is in the field. When I copy the
contents of the field to a word document and run word count I get
4,680 word. Can anyone tell me what is going on.
Thanks
Actual Data:
"The answers to the questions are below in italic magenta.
The answers reiterate FAR sections. As they are parts of
published regulations, there is no sense in referring to them
""official GSA policy"" as if there is some other authority for the
informa
- here is where it stops-
- here is what should be next
tion.
Ask Acquisition is a convenience service of the Office of
Acquisition Policy; not as an avenue for policy decisions. If they
need a formal response from the Office of Acquisition Policy, you
will need to send any formal inquiries to
- more data -

What is the value of the
Long Text Buffer advanced setting for your Access data
source in ColdFusion Administrator? And/or is CLOB enabled?
Phil

Similar Messages

Conversion problems with Memo field in Access database

I have the latest version of Migration Workbench and the Access 2000 plug-in.
I am using an ODBC driver, and the SQL conversion requirements for converting
to a native driver seem too time and labor intensive to be feasable.
My problem is that I have some "Memo" columns in my Access database containing
over 200,000 rows that I need converted to Oracle. This is something I'm going
to need to do over-and-over again for different Access databases.
I gave up on mapping the Access "Memo" datatypes to Oracle "Clob" datatypes. It
was either taking forever or taking WAY too long.
Then I tried mapping the Access "Memo" datatypes to "Varchar2(4000)" and although
it completed it took longer than my customer will like (think 1/2 an hour just for
all the rows of one memo column in one table).
Finally I tried going into the original Access database and converting the "Memo"
column into a "Text" column. It wouldn't work, I kept getting the error:
=====
Microsoft Access can't change the data type.
There isn't enough disk space or memory.
=====
even though I had over 10GB of free disk space and only 1/3 of my memory was being
used. I assume this is a memory-max limitation in Access 2000.
Any suggestions for speeding the conversion? Could I stagger using Migration workbench
to create the tables. . .then use SQL*Loader to load the data. . .then use Migration
workbench again to put in the idexes, etc? Would this be faster even if it worked?
Thanks,
Aaron Chawla

I have the latest version of Migration Workbench and the Access 2000 plug-in.
I am using an ODBC driver, and the SQL conversion requirements for converting
to a native driver seem too time and labor intensive to be feasable.
My problem is that I have some "Memo" columns in my Access database containing
over 200,000 rows that I need converted to Oracle. This is something I'm going
to need to do over-and-over again for different Access databases.
I gave up on mapping the Access "Memo" datatypes to Oracle "Clob" datatypes. It
was either taking forever or taking WAY too long.
Then I tried mapping the Access "Memo" datatypes to "Varchar2(4000)" and although
it completed it took longer than my customer will like (think 1/2 an hour just for
all the rows of one memo column in one table).
Finally I tried going into the original Access database and converting the "Memo"
column into a "Text" column. It wouldn't work, I kept getting the error:
=====
Microsoft Access can't change the data type.
There isn't enough disk space or memory.
=====
even though I had over 10GB of free disk space and only 1/3 of my memory was being
used. I assume this is a memory-max limitation in Access 2000.
Any suggestions for speeding the conversion? Could I stagger using Migration workbench
to create the tables. . .then use SQL*Loader to load the data. . .then use Migration
workbench again to put in the idexes, etc? Would this be faster even if it worked?
Thanks,
Aaron Chawla

Problem with repaint of display after a click event

Hi,
I have a problem with repaint of display. In particular in method keyPressed() i inserted a statement that, after i clicked bottom 2 of phone, must draw a string. But this string doesn't drawing.
Instead if i reduce to icon the window, which emulate my application, and then i enlarge it, i see display repainted with the string.
I don't know why.
Any suggestions?
Please help me.

modified your code little
don't draw in keyPressed
import java.io.IOException;
import javax.microedition.lcdui.Canvas;
import javax.microedition.lcdui.Command;
import javax.microedition.lcdui.CommandListener;
import javax.microedition.lcdui.Display;
import javax.microedition.lcdui.Displayable;
import javax.microedition.lcdui.Graphics;
import javax.microedition.lcdui.Image;
public class PlayerCanvas extends Canvas implements CommandListener{
     Display display;
     Displayable dsp11;
private Image play, pause, stop, next, previous = null;
private int gamcode;
private Command quitCmd = new Command("Back", Command.ITEM, 1);
public PlayerCanvas(Display display,Displayable dsp11){
     this.display =display;
     this.dsp11 =dsp11;
     addCommand(quitCmd);
     createController();
     setCommandListener(this);
     display.setCurrent(this);
          protected void paint(Graphics g)
          g.setColor(255,200,150);
          g.fillRect(0, 0, getWidth(), getHeight());
          if (play != null){
          g.drawImage(play, getWidth()/5, getHeight()-50, Graphics.BOTTOM | Graphics.HCENTER);
          if (stop != null){
          g.drawImage(stop, getWidth()/5, getHeight()-10, Graphics.BOTTOM | Graphics.HCENTER);
          if (next != null){
          g.drawImage(next, (getWidth()/5)+10, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
          if (previous != null){
          g.drawImage(previous, (getWidth()/5)-30, getHeight()-30, Graphics.BOTTOM | Graphics.LEFT);
               /////this will draw on key UP
               g.setColor(0,0,0);
               System.out.print(gamcode);
               if(gamcode==Canvas.UP){
                    g.drawString("PROVA",10, 0, 0);
               }else if(gamcode==Canvas.DOWN){
                    g.drawString("DIFFERENT",10, 30, 0);
private void createController()
try {
play = Image.createImage("/icon3.png");//replace your original images plz
pause = Image.createImage("/icon3.png");
stop = Image.createImage("/icon3.png");
next = Image.createImage("/icon3.png");
previous = Image.createImage("/icon3.png");
} catch (IOException e) {
play = null;
pause = null;
stop = null;
next = null;
previous = null;
if (play == null){
System.out.println("cannot load play.png");
if (pause == null){
System.out.println("cannot load pause.png");
if (stop == null){
System.out.println("cannot load stop.png");
if (next == null){
System.out.println("cannot load next.png");
if (previous == null){
System.out.println("cannot load previous.png");
          protected void keyPressed(int keyCode)
               repaint();
               if ( (keyCode == 2) || (UP == getGameAction(keyCode)) ){
                    gamcode = UP;
                    repaint();
                    else if ( (keyCode == 8) || (DOWN == getGameAction(keyCode)) ){
                         gamcode =DOWN;
                         repaint();
          else if ( (keyCode == 4) || (LEFT == getGameAction(keyCode)) ){
          else if ( (keyCode == 6) || (RIGHT == getGameAction(keyCode)) ){
          public void commandAction(Command arg0, Displayable arg1) {
               // TODO Auto-generated method stub
               if(arg0==quitCmd){
                    display.setCurrent(dsp11);
}

Problem with currency field in smart form

hi
friends ..
i had problem with currency field in smartform iam printing 5 currecny
fields after the main window .But not getting printed on right way gets printed down from the given mesaurement and i get lot of gap betwen the
each fields for ex.
33,260.00
120.00
0.00
0.00
0.00
i thought the the problem is with space .so iwanted to condense it but cannot as it is currency field so move into character fields .but the user want out put in currency format like 22,60.20 if i get the value in char variable i get 2260.20 which i dont want .
so pls help me how to condense or shift left and print the currency field on right place.
regards
answers will be rewarded points.

hi,
this is a normal problem u can avoid this by moveing these currencu value to a character field then print the char field us ing condece... &var(C)&..
eve if not solve the problem use the TEMPLATE node..
Please Close this thread.. when u r problem is solved. Reward all Helpful answers
Regards
Naresh Reddy K

Problem with a field set to refresh after insert at Row level

hello all,
i have a problem with a field (a serial) which is set by a db trigger at insertion. The field "refresh after insert" is properly set in the Entity and everything is refreshed correctly when i insert data via an adf form in a jspx but when i want to insert programmatically nothing is refreshed. I insert data this way :
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
newRow.setAttribute("mandatoryAttribute1",value1);
newRow.setAttribute("mandatoryAttribute2",value2);
<more init here but not the serial since it will be set by the DB trigger>
insertVO.insertRow(newRow);
but when i want to get back the value with "newRow().getAttribute("TheSerial");" i always get a null back and not the value set by the db trigger.
One way to get the serial is to commit after each insert but i don't want to commit between inserts.
i've tried to unset the refresh after insert and override the createDef() method to setUseReturningClause(false) as it's is advised in chapter 26.5 of the ADF 4GL dev. guide but in this case i have an exception JBO-29000: JBO-26041.
How can i get the value back properly ?
thanks
-regards

The data for the newly created row doesn't get inserted into the database until the commit is executed, so the insert trigger isn't called.
If you need to get the value without committing, then you should implement the trigger programmatically and drop the trigger from the database. The code below shows how you could do this.
ViewObject insertVO = findViewObject("myView");
Row newRow = insertVO.createRow();
SequenceImpl seq = new SequenceImpl("MY_SEQ", insertVO.getDBTransaction());
Long next = (Long)seq.getData();
newRow.setAttribute("primaryAttribute", new Number(next));
...You will need to replace MY_SEQ and primaryAttribute with the correct values for your example, but this should acheive what you want.

Problem with hotmail calendar display

Problems with hotmail calendar display.

I am almost a total computer novice and am having what I think is the same problem Just got my first Apple computer (Macbook Pro). MSN Hotmail is my email account. All the events on my 'hotmail' account are now unreadble because they are squished to the left side of the screen and I don't find any instructions as to how to fix this in the system. This problem didn't exist when I first started using my MAC two days ago, but now I'm stuck. Everything else in my 'hotmail' seems to work fine. Don't know what Chrome or Firefox is or if there is a cost for them. Also, have never downloaded a program if any kind.
My calendar is critically important to me and I don't have a clue as to what to do now. Hope you can help.
Thanks. Linda

Since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

since i have upgraded my i phone5 to 7.0.3 it has problem with 3g it display the service message every time, it reduce the battery life also.

Try using Settings > General > Reset > Reset All Settings.

Problem with Date fields in Search panel

Hi all,
I use TP2 and in my jspx page I have a search panel with two date fields and table where the results is displayed. But there is a problem with these date fields, because when I search dates the results is nothing even I retype the date from table. Also I have other pages where this problem exist with same structure.
Could somebody help me with some advice?
Thanks in advance!

Hi Frank,
Thanks for the answer.
I use the standart method to make search panel with drag and drop the data control to the page. The other search panel fileds work fine, only the date fileds are problem. Maybe something in view object doesn't work properly.
Here I post the code from my page.
<table border="1" style="margin:5px;">
<tr>
<td>
<af:showDetailHeader text="ТЪРСЕНЕ" disclosed="true"
inlineStyle="width:780px;">
<table cellspacing="2" cellpadding="3" border="0">
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.EGN.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.EGN.inputValue}"
label="#{bindings.EGN.hints.label}"
columns="#{bindings.EGN.hints.displayWidth}"
maximumLength="#{bindings.EGN.hints.precision}"
simple="true"/>
</td>
<td align="right">
<af:outputLabel value="#{bindings.LNC.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.LNC.inputValue}"
label="#{bindings.LNC.hints.label}"
columns="#{bindings.LNC.hints.displayWidth}"
maximumLength="#{bindings.LNC.hints.precision}"
simple="true"/>
</td>
<td align="right">
<af:outputLabel value="#{bindings.AccPersonID.hints.label}"/>
</td>
<td align="left">
<af:inputText value="#{bindings.AccPersonID.inputValue}"
label="#{bindings.AccPersonID.hints.label}"
columns="#{bindings.AccPersonID.hints.displayWidth}"
maximumLength="#{bindings.AccPersonID.hints.precision}"
simple="true"/>
</td>
</tr>
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.PersonName.hints.label}"/>
</td>
<td align="left" colspan="5">
<af:inputText value="#{bindings.PersonName.inputValue}"
label="#{bindings.PersonName.hints.label}"
columns="#{bindings.PersonName.hints.displayWidth}"
maximumLength="#{bindings.PersonName.hints.precision}"
simple="true"/>
</td>
</tr>
<tr align="left">
<td align="right">
<af:outputLabel value="#{bindings.DateFrom.hints.label}"/>
</td>
<td align="left">
<af:inputDate value="#{bindings.DateFrom.inputValue}"
label="#{bindings.DateFrom.hints.label}"
simple="true">
<af:convertDateTime pattern="#{bindings.DateFrom.format}"/>
</af:inputDate>
</td>
<td align="right">
<af:outputLabel value="#{bindings.DateTo.hints.label}"/>
</td>
<td align="left">
<af:inputDate value="#{bindings.DateTo.inputValue}"
label="#{bindings.DateTo.hints.label}"
simple="true">
<af:convertDateTime pattern="#{bindings.DateTo.format}"/>
</af:inputDate>
</td>
</tr>
<tr>
<td align="right">
<af:commandButton actionListener="{bindings.Execute.execute}"
text="#{bundle.FindBtn_LABEL}"
disabled="#{!bindings.Execute.enabled}"
icon="/images/find.png"/>
</td>
<td align="left">
<af:commandButton text="#{bundle.FindClearBtn_LABEL}"
icon="/images/find_clear.png"
action="#{PeopleBean.onClearVCBtn}"/>
</td>
</tr>
</table>
</af:showDetailHeader>
</td>
</tr>
</table>
Also I have a result table for the search panel, but I don't believe the problem can be there because it works fine when I search in fields different by inputDate.
Do you have any suggestions?

Problems with dynamic PDF display in reader 8.1.0

I have created a dynamic PDF Form having 30 text fields in a row. All these fields are bounded to XSD. The design is like, a row of fields display a single user informations. When I import a XML with 100 user informations, then my PDF crashes. If I import a XML with 50 user informations, then it works fine. Anything beyond that count causes the PDF to close automatically. I believe, its the number of fields which causes the problem. I may be wrong.
I also needs to enter 100 user informations by adding rows one by one. The PDF becomes very slower when I add beyond 35th row. I'm using Livecycle designer 8.0 for designing dynamic PDFs and using Adobe reader 8.1.0 for viewing.
Can anyone help me on this?

Hi,
I figured our there was a setting to enable/disable Javascript which caused this issue.
I was using javascript in the LC 8 for manipulations in the dynamic pdfs.
I enabled the javascript and now it is working fine.
Thanks,
Vidya

Problems with JBO errors displaying when using custom insert VO methods

Hi!
I have a problem I hope I can explain :).
I have a VO that has custom execute and insert methods implemented in application module.
public void executeWithParamsMyViewG(String asID)
    // find the view
    MyViewImpl loMyViewImpl =
      getMyViewG();
    loMyViewImpl.setNamedWhereClauseParam("IDParm", asID);
    // execute the querry
    loMyViewImpl.executeQuery();
public void insertRow(String asID)
    MyViewImpl loMyViewImpl =
      getMyViewG();
    // create new row
    Row loRow = loMyViewImpl.createRow();
    // set fields in new row
    loRow.setAttribute("ID", asID);
    loRow.setAttribute("MyAttribute", "A");
    loRow.setAttribute("MyAttribute2",
                       afContext.getProcessScope().get("MyParm"));
    // insert new row
    loMyViewImpl.insertRow(loRow);
}I have custom error handler with
    public void reportException(DCBindingContainer bc, Exception ex) {
       //Force JboException's reported to the binding layer to avoid
       //printing out the JBO-XXXXX product prefix and code.
      disableAppendCodes(ex);
      super.reportException(bc, ex);
    private void disableAppendCodes(Exception ex) {
      if (ex instanceof JboException) {
        JboException jboEx = (JboException) ex;
       jboEx.setAppendCodes(false);
        Object[] detailExceptions = jboEx.getDetails();
        if ((detailExceptions != null) && (detailExceptions.length > 0)) {
          for (int z = 0, numEx = detailExceptions.length; z < numEx; z++) {
            disableAppendCodes((Exception) detailExceptions[z]);
    }I also have custom phase listener and page lifecycle but without any 'important' methods overridden.
Than I have a jspx with af:processChoiceBar for navigation, Create button binded to insertRow method, commit and rollback buttons and form with input fields. One of them is required, but with validation on server side, not on client side (showRequired instead of required).
My problem is this:
If I add an empty row, leave all the fields blank and try to commit I get required field message, which is OK. But if I use af:processChoiceBar (previous page, next page, select any of the pages), the message is not displayed. The message is displayed after when I try to return to this page. If I debug the exception in reportException method has the code 27024 for DeferredRowValidationException, not the required attribute error which is displayed.
Can anyone help me with this please, I've wasted a lot of time on this now.
Regards!
BB

Hi,
Does anyone know why this would not be working. It's really irritating!

Problem with number field

Hi,
I'm using ADO (Oracle Provider for OLEDB) to connect Oracle 9. If the type of any field in table is Number(9) and I open query with this field, all negative values are displayed as positive values. For example: If I write -1 value to this field and then post the dataSet (Delphi7 - TADOQuery) value is refreshed to 1. Real value in database is -1.
Could anybody help me with this problem?
Regards Jan.

Once again :)
I finally foud out that Deplhi does support (varDecimal), but delphi TCustomADODataSet (ADO recordSet wrapper) component incorrecltly treats such field type. It regards Decimal(<9,0) as integer (TIntegerField) but when it gets value from underlying ADO recordset it expects integer variant. So it's delphi problem. I hat to fix this problem in source code of this component.
Regards Jan.

Problem with number-fields in csv-Export-Files

Hello,
the export with the csv option works fine and our users like this export-function.
But Unfortunatelly we have some problems with the exported number fields. In my region I defined the field with a format mask.
On the screen it looks fine but when I change to csv the values are exported as text-values.
So in excel the columns are shown with left alignment.
When I try to change the format in excel to number, excel change the column type but not the value inside.
On this account we cannot use the sum-function and the display of the value is wrong (alignment).
Which possibilities do I have to resolve that problem?
Thanks in advance
Ulrike

I have the same issue - Anyone any ideas on how to export currency values in a report to excel as numbers?

Problems with Memo data type in access

I have a Java program which is connected to a Microsoft Access Database. When trying to get a Memo data type field out of the DB and putting it into a StringBuffer, it causes a Function sequence error, even though it does put the field into the said StringBuffer.
For all other data types, like text (string), long integer etc there is no error but only for a memo field.
What's the best way to get a memo field out of an Access DB without it causing problems? or should i just forget Microsoft's Access and make my DB in Oracle?

Hi! Can you tell me how connect a java program with a Microsoft access DB? Should I have to use a particular driver? Where I can find it?
thank you vcery much for your help!!

Problem with Hiding fields of selection screen which is called as subscreen

Hello All,
I have problem while hiding the selection screen which is called as subscreen.
Flow of my logic:
Selection-screen with one field and three buttons CREATE,DISPLAY and CHANGE in application toolbar.
user enter some value in field and either he press change or dispaly
When change i need to call selection screen when it is in dispaly i need to stop calling this selection screen.
Upto my knowledge we can't stop calling selection screen in display mode so there is only one possibility is hiding the fields when it is in display mode.
How can i hide the fields and where i need to hide fields?
Please post some codes.
Regards,
Lisa

you can refer the sample code which i mentioned in your previous post. that will solve the problem.

Problem with add fields in KOB1

Hi,
I need to add some fields in the KOB1 report for Display Actual Cost Line Items for Orders, i have tried change the Customizing include CI_RKPOS with the new fields and the includes ZXKAEPTOP, ZXKAEPU01 from EXIT_SAPLKAEP_001. The problem is that the new fields are marked with 'X' in the fielcat-no_out and not appear in the report. How can i change this fieldcat or do that these fields appear in the report.
Thanks.

Hi,
do like this
1) there is a view covp go in to that open table/join tab COEP table in that one include is there CI_COBL
in this include put your custome fields.
and activate it.
2)open se37 tc and run this RS_SEL_OPTIONS fm and exe cute it click on creat button and you can able to give group no in the sceen with the fields which you need to display. then save it.
3) run kob1 you will get it

Problem with memo field displaying

Similar Messages

Maybe you are looking for