Problem with memory in k7t turbo limited ed.

serious problem!! i've got mainbord k7t turbo limited edition with vhipset via vt82c686b. untill now i had one 128 MB memory installed. I want to extend my memory but when i insert another memory to another slot computer does not start... (led status i all red!) no metter to with slot i insert new memory (its the right pc133 memory type) and no matter if it's 128 or 256 MB. Witho only one slot used it work properly even with 256 MB. Problem occurs only with 2 or more slots sed... this memory works with no problems in other computer (different mainboard)
PLEASE HELP!!!!
thanks in advance

Most times is due to incompatibility between memory modules. Best way to avoid it is to buy 2 modules same brand, or one bigger module.

Similar Messages

K7T Turbo Limited Ed. and problems :(

Hallo
I have MSI K7T Turbo Limited Edition mobo (on KT133A). Yesterday something strange happened. I was surfing the net and suddenly my PC rebooted. After reboot I saw that in BIOS test, BIOS didin't detect my hard drives connected to first controller. CD-ROM and CD-RW were properly detected on the second controller.
I turn the PC off....waited about 30 seconds and turn it on. And everything was fine again. But in a short time it happened again. But now I heard something strange. I heard that both drives are stopping...slow down wnd stop. After a 1-2 sec. windows XP freezed and PC rebooted again :( And again there was no drives detected on first controller :(
I checked:
1. viruses - system is clean. I checked it with NAV2003 (within windows and dos - from bootable disc)
2. I tried to plug those 2 drives (15 GB Caviar and 15 GB Fujitsu) to the second controler (first was empty).
I asked some friends about it and one said that it could be power supply (maybe there is some instability or something).
Someone else told me that it could be a battery on the mobo (I have has this mobo for 2 years).
Or maybe it is a problem with motherboard? Maybe controller is damged....but...from the other hand when I restar the PC everythin works fine....some time :(
System: AMD XP1700+ (not overclocked), mobo as I said above, Radeon 8500, CD-ROM and CD-RW (pluged to second controller), Caviar 15 GB and Fujitsu (pluggeg do first controller), Windows XP with SP1.
I had no problems with that system befere.

Hi
I must check the type of that battery...but from the other hand if the battery was the problem it wouldn't keep all BIOS settings. Am I right? But it keeps.
Power supply is 300W - it is a kind off no-name (I bouhgt it with case 3 months ago and there was no problems befere :( )
I've already borrowed one - I'll check it later today (after work).

6330 K7T Turbo Limited Ed. Problem

I bought a brand new 6330 K7T Turbo Limited Edition.
It shuts down by itself within 10 minutes (sometimes even within 5 sec.).
The temperature protection in the BIOS has been turned off and I've upgrade to
the latest BIOS (V3.5). I tried unplugging everything except the powersupply,
memory, K/B, Mouse and video card. But it does the samething. Please Help. Thanks.
CPU: AMD Athelon 1.1 Ghz
RAM: Kingston PC-133 128MB
Video Card: ATI Xpert 2000 (Rage 128 Pro)
400 W power supply. (Known good)

It shut down completely.
I didn't even have any HDD connected. (M/B, RAM, CPU, Video Card, Cooling FAN, K/B & Mouse only) I'm sure the PSU is good because I'm using it now (so as the other accessories). the PSU is 400 W, 30A@5V, [email protected]
I tried 3 different brands of video cards, 2 brands of memory modules. They all did the same thing.

K7T Turbo Limited Edition HD Max

I currently am running this setup:
K7T Turbo Limited Edition Motherboard, AMD Athlon XP 1800+ 1.53 Ghz, 384MB PC-133, 27.2 GB WD, 40GB Maxtor, Gigabyte 5900XT, MSI 52x Combo, Linksys 10/100 NIC, Sound Blaster Live Audigy2 Limited Edition
I have been over and through the website and I noticed that with the new BIOS which (3.6) the Turbo2 (which I don't have) can run up to a 160GB Hard drive. I was wondering what the max is for the normal turbo. My WD 27.2 GB drive is going sour and I want to upgrade to a Seagate 200GB HD, since I plan to use it when I upgrade in January. Any ideas whether it will work without out major headaches?

Quote
Originally posted by osnavi
As said by Rogue_Wulff, you should select the 120 GB HDD as the 160 Gb. could have same problems as the 200 Gb. ( More than 136 Gb)
Alright, thanks.

MSI K7T Turbo Limited Ed. + XP1700+

Hi
I would like to know if my mainboard (MSI K7T Turbo Limited Edition on KT133A) supports XP1700+ 0,13 processor?
I've already read on this site that it doesn't :( but from the other hand I've heard that some people have those Xp1700+ on the same boards and everythings works fine (with bios ver. 3.6).
So...will it work or not? XP1700+ 0,18 works perfect.
Regards

Hi, it may work but there is no official support for it.
http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=25&NAME=MS-6330%20Ver3.0

K7T turbo Limited

Need help on setting up and using IDE3&4 on my K7T turbo Limited edition. I have not used IDE 3&4 yet. How do I set it up as a raid config. Does my boot drive still stay at IDE1, or does it move to IDE3 or 4 . Is the some type of bios setting for the raid?
I have tried to use the IDE 3&4 as ATA 100 controller, the drive showes up in the preboot screen and it is there but under win xp pro I do not see the drive at all. How should the drives be set as masters or slaves?
sorry for al the question s , but I'm on a mission to learn this raid stuff and make use of the board.
Cheers Mike H

I'm Still having a problem using IDE 3&4. I tried what it said in the forum " How to use your Raid 3&4. But when I install my main drive on ide3 it will not boot. The Promise boots and looks at the drive and see it there, but it says that the cable is only a 40 pin cable ( it is not it's a ata 100 round cable) then goes on to try to boot and I end up in this circle of it trying to boot looks for drives then just keep restarting.
If I try to add another drive to the IDE 3 or 4 as additional drives it will not see the drives. Now I have the Promise device in the device manager and the drivers are loaded. But in the bios I can select that it look at Raid then scsi, but the is no other place in the bois to see raid. Under first boot device it willonly show the usual floppy, hd 0,1,2,3 or scsi. Any ideas what is going on here.

K7T Turbo limited - USB not working

I have a K7T turbo limited edition motherboard. The rear usb ports work fine. There are two USB ports on the front which do not work. appreciate any ideas on how to clear up this problem.

https://forum-en.msi.com/index.php?threadid=52338&sid=
one to many wire is usual problem

PCI 2.1 SLot on K7T Turbo Limited Edition?

I'm about to get a Firewire Card but I'm not sure whether my MB : K7T Turbo Limited Edition (MS-6330 v3.X) has a PCI 2.1 slot. I haven't found it in manual either. Can anybody help?
Thanks
minurec

Welcome!
My Turbo2 manual doesn't specify either, but specs on MSI site for mine shows 32 bit PCI 2.2, usually backward compatible. Your MB is just one very short edition back, and I bet your slots are probably the same and 2.1 compatible. MSI shows yours as 32 bit, but w/o the #version. To my memory the 2.1 standard predates our MBs by a couple of years or more. I think you're safe to go.

K7T Turbo Limited Edition W/Raid board

Can someone tell me if the VIA KT133A Chipset Based K7T Turbo Limited Edition W/ Raid board will take a faster processor beyond 1.6 ghz? if so what is the fastest cpu it will take?

Athlon xp 1800 thoroughbred works on my k7 turbo r le,
Thanks to everyone here, I read a gazzilion messages before i was brave enough to start and it paid off.
Fitted board (£29 from stal.com) fitted duron, downloaded bios 3.6 and installed. set core voltage in bios to 1.55 and multiplier to 11.5x .Fit xp1800 - Boot and then go back into bios to set processor at 1.5v(Note: 1.5v not available until first boot with xp 1800)
Now going to try the fuzzy logic thingy.
Good luck.

K7T Turbo Limited Edition + Raid

Im Planning to upgrade to a K7T Turbo Limited Edition + Raid (MS-6330 3.0) with an XP 2000.... are there any issues with the board with this CPU? According to the bios updates theysupport up to XP2600+'s... im not going ddr yet, prices are WAY to high.
Just need somethin a bit faster than this Duron 900

LOL
Ok... check here:
link
only one K7T Turbo2 : link
And here : link
there have a lot of MS-6330's, don't buy any of them as those are obsolete model. Go for K7T Turbo2.

K7T Turbo limited edition can't support Windows XP!!!!

i'm user of K7T Turbo Limited Edition mainboard, i treid to upgrade my OS to Windows XP currently and i found that the installation aborted abnormaly when it reach windows is restarting phase, and my PC will just hang without giving any response, i'm wondering my mianboard can't support Windows XP. Another prob i face is my hp deskject 630c printer couldn't supported by the mainboard also, i had tested on other PC and it works truly well. Anyone facing similar situation ?? can i solve my prob with update the latest BIOS

Hi!
There is no reason why your mobo (or printer for that matter, XP-drivers, both for parallel and USB interface can be downloaded from the HP site) would NOT support Windows XP.
It could be, however, that you need to update BIOS first. If you have a BIOS version prior to 3.0, you will have to update.
Regards,
Hans

K7t turbo limited edition drivers (duron 700)

Can anyone tell me where to get the drivers for the K7T turbo limited edition? It has the duron 700 installed. Do I need to find out what chip set? if so, how? then what else do I need to know and where do I go?
Thank you,
Troubled

If this is your board, here is the drivers for it.

Problems with Memory on upgrading

Problems with Memory. I Dide not hace space to upgrade. Now i do, but It still cancels for lack of space

Actually, your problem does not sound like memory, but hard drive space. By default, you lose 10% of your drive to the OS and formatting. To tell how much hard drive space you have go to:
>Finder
>At the bottom of finder in the gray bar it will tell you how much space you have available on your hard drive.
Your hard drive should be no more than 85% full! If it is, delete, get a larger hard drive, remove items to an external drive.
GarageBand only needs 1.2 MB of space.
In order to use GarageBand, some additional content is required. If you do not already have the content installed, it must be downloaded.
Make more disk space available by moving some of your files to a different disk (such as an external hard disk or a USB flash drive), or by deleting files you don't need and then emptying the Trash

Strange problems with memory dimms(Banks) in imac 27in mid2010

Hello dear Apple community. I had a really strange problem with memory dimms(modules anyway)
I have one really good imac 27in with i7 but as you know after some years the lcd screen became yellowish and cloudy
So i decided to clean it as i have some knowledge and i did that to others lcd screens with success.
OK so after successfully cleaning and working like new ( i mean not the external screen with magnets but the lcd internally)i started it.
Before dismantling my memory was 16gb ( 4x4 dimms)
After starting it a strange problem arise without any reason! Memory reduced TO 8 GB!!!! memory banks on the right as we seeing it didnt worked at all
and it was not from dimms because i swapped them..!!!
So after a lot of thinking and asking tech guys to take a second opinion all the saying (including me that logic board failed for some strange reason.
Some days before i installed CCleaner and also Onyx because after a lot of installations and uninstallations my mac became a little sluggish..
I thought that some serious preferences files removed or some hardware settings deleted with Onyx ( is very good and powerful program that can fix the pc and also destroy it in a second) so i removed and reset all preferences. But nothing changed.. So i put a new hard drive and reinstall OXS to see if something can change.
After formating HD to appleHFS+ saw system profiler that still couldn't see all banks(16gb). I remove logic board and i put another processor i7 that i have as a back up and still nothing( some saying that only these 2 things must be faulty if memory banks not working , processor an logic board and sometimes reinsatlling OS can fix it as i mentioned before. But still nothing...
So from my nerves and after so much testings and no sleeping for 2 days as it was working i pulled off the memory modules from the right bank i put them again ( off course nothing changed) and i close it. After i restarted it like a miracle finally i saw that i have again 16gb in system profiler!!
Tech guys here please give me an explanation to this because i gooing crazy! What happened and after i pulled off the dimms while it was working the problem fixed?? It is not recomended at all this action. I forgot to mention that i did Apple hardware test and nothing found..
Sorry for long post.

Okay great news... My memory problems are solved and my Mac Mini is now running at 8 gigs of Ram. I tried the suggested DD3 1333 which the computer wouldn't even recognize.
So after visiting the Apple Store in the Fair Oaks VA shopping mall; they suggested that I try DDR3 8500 ram. I visited Micro Center in Vienna VA, and I purchased BGreg's Suggested Crucial Brand Ram. 10 minutes after I got home the Mac Mini booted on the 1st try with 8 gigs of Ram.
Some venting that Apple hopefully will read and mention to their resellers....
The people in the Apple section of MicroCenter in Vienna at first argued that the Mac Mini only supports 4 gigs. EVEN AFTER I SHOWED THEM THE SPECS on the Apple website. The clerk (who I am calling a clerk because by no means was he a "specialist") even suggested that the Apple site was wrong. On a later visit to MicroCenter to purchase the DDR3 8500, that the people at Apple recomended; Microcenter even suggested and argued that I needed DDR3 1333 and NOT DD3 8500. THIS WAS AFTER I TOLD THEM THAT Mac Mini WOULD NOT RECOGNIZE the DD3 1333 Dimms. Working in retail myself I don't go along with the concept that the customer is always right, however in this instance clearly I was.
I should point out that some of the staff in Microcenter really do try hard, however like with any business it only takes a few "know it all" bad examples to turn customers off.
Curious post thought; I wasted about $75 in gas driving to and from Microcenter because of their bad advice.

Lock Ups !!!!!!! "k7t turbo limited edition"

1.3g duron
k7t turbo Lim.Edition
256mb 133mhz sdram
40gig seagate , 10gig samsung
Liteon 16x10x40x / 52x cdrom
7200 Radeon Pci 32mb
REalTek Ethernet
Welp fixed other problem by installing XP with cpu cache off and then turned back on when finished. Everything seemed to work fine all up to the point when I tried to start playing games. First game "quake 3" works fine aslong as im constantly moving intill I have to leave it on untouched for a min or so. Then it locks up or freezes and all I see is a black screen. In starcraft it will let me play for a good 2 minutes and then the screen freezes. Last game I tried was black and white that let me play for a good 4 mins then everytime i tried again the time it took to lock up got shorter and shorter. Ive installed new bios and via chipset drivers and still nothing.
Anybody got any other ideas I can try ????????????

well I didnt think I needed to since I was using a PCI card. I guess Ill go ahead and try. As for my power source im going to list everything it says cause i dont know a thing about them.
model: atx-350-12v
max output is 350w
input: output:
115vac +12v 15a max
8a max +5v 35a max
60hz
230vac +3.3v 20a max
4a max -5v 0.5a max
50 hz -12v 0.5a max
hope that helps

Problem with memory in k7t turbo limited ed.

Similar Messages

Maybe you are looking for