Problem with Microsoft LX-3000 Headset

I just got a Pavillion DV7 A1T85UAR#ABA. I love evrything about this system, but I can't get my Microsoft LX-3000 USB headset to work. I have installed the audio drivers for both 32bit x86 and 64bit x64. When I go to the sound and check the headset out I get good audio in both channels. when I try to play itunes I get audio fro the system speakers but nothing through the headset. Anyone have any ideas?

It may just be defective.  If you have access to another, I'd test that out.  Otherwise you might want to look into returning it from where it was purchased or looking into the warranty.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Similar Messages

  • Problems with Epson Stylus 3000 IP Ethernet

    Problems with Epson Stylus 3000 IP Ethernet
    The printer stops processing after reaching 1,72% of printing.
    The Ethernet Cards led is on and blinking green.
    I am running
    Powerbook G4
    OSX 10.4.5
    Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
    I can se the printer in Epson MacAssist for OSX Ver 4.0.aE IP 10.0.0.6
    I can se it as well in Safari under the ip adress 10.0.0.6
    I have tried to test the printer in the Common Unix Printing System
    I can see the printer there as well.
    A test print here results in
    "ipp" stopped unexpectedly with status 1
    All my other printers work well and prints test sheets.
    The printer has not worked since Tiger.

    Can you please help me....
    I can't seem to get the Print Set up utility to find the Epson Stylus 3000 Gimp.
    I installed the GimpPrint Drivers that were on the Tiger 10.4.3 install DVD after I installed 10.4.3, and then updated 10.4.3 to 10.4.5.
    When I first installed 10.4.3, I didn't install the GimpPrint Drivers. I went back to the DVD after updating to 10.4.5, and then installed the GimpPrint Drivers.
    Can you please help me out in what I'm doing wrong. Everytime I try to find the Epson Drivers an "error:-50" comes up in the Printer Browser under IP Printer section.
    Here's what I'm doing:
    - I go into Printer Setup Utility
    - I choose Add Printer
    - I choose IP Printer
    - I choose Line Printer Daemon - LPD
    - I pop up the "Print using" and select the "EPSON".
    - Then I choose "EPSON Stylus Color 3000 - Gimp-Print v5.0.0-beta2
    - THEN I GET AN ERROR MESSAGE POP-UP! "An error occurrd while trying to add the selected printer. Error:-50"
    Where did you find the:
    Epson Stylus Color 3000 + Cups Gimp Print v4.2.7
    Thank you for you help in advance!
    Micdim
    G4 Dual 1.42 gig   Mac OS X (10.4.5)   1G Ram, FCStudio, Logic Pro 7.1, Adobe CS2, After Effects 7, MSOffice 2004...

  • Anyone know why my itunes says I need to re-install and that it's having problems with Microsoft Visual C

    Anyone know why my itunes says I need to re-install and that it's having problems with Microsoft Visual C++?

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562
    littlered1382 wrote:
      I am also concerned that I will lose all of the things that I have backed up from my phones, purchases, apps, etc.
    It has always been Prudent to Create and Maintain a Backup of anything you would not like to lose.

  • I installed Lion and now seem to have problems with Microsoft Silverlight and other plug ins and applications.  I haven't ever used time machine to back up (my bad I know).  Is there a way to go back to snow leopard with messing up all my files and my set

    I installed Lion and now seem to have problems with Microsoft Silverlight and other plug ins and applications.  I haven't ever used time machine to back up (my bad I know).  Is there a way to go back to snow leopard with messing up all my files and my set?

    Are you using the latest version of Silverkeeper? - v.2.0.2 is stated to be compatible with Snow Leopard.
    http://www.lacie.com/silverkeeper/
    If it's messing things up you could try asking LaCie Support for assistance.

  • Problems with Microsoft Word 2011

    Hello,
    So, I'm having a slight problem with Microsoft Word 2011. Yes, I realize this isn't exactly Apple related, but I was wondering if it had to do with a compatibility issue with Lion.
    I'm running version 10.7.3, and I've found that when I try and change my language in Microsoft Word to English (Canada) - also have tried English (Britain) - and neither of them have changed successfully. My system language is also Canadian English, but none of these options seem to stop my Microsoft Word from trying to correct Canadian English spelling.
    If anyone knows if there has been updates to Microsoft Word for this issue, please let me know. I thought it would be worth a shot asking here, as I could find nothing anywhere else.

    You may also want to search/ask in the forums run by the make of this app to deal with its problems:
    http://answers.microsoft.com/en-us/mac/forum/macword

  • Problems with Microsoft Office

    I really don't know where to post this as I can't find a Discussion forum for it, please re direct me if this is....
    So I'm having a HUGE problem with Microsoft Office. I've had the Student addition, purchased it in a store, and have been using it since without any issues. Just yesterday, it told me I needed to download an update for it in the System Update. Well it downloaded without a problem, however during the installation it stalled and never completed. When I turned my computer back on, and did the System Update again, it said that my system was completely up to date. However, now the only too things in my Microsoft Office folder is PowerPoint and Excel. The other applications can not be located anywhere on my computer.
    Now is there a way for me to fix this. I no longer have the CD with Microsoft Office on it because I'm constantly traveling. I'm extremely annoyed because I rely on Entourage for my emails, don't really like the Mail application. I just want to know what to do. Any suggestions?
    Thank you.

    When an installer 'stalls' during the installation, I'd guess you'd need to try reinstalling from the CD. I could be wrong though. Here is another forum that may help you if you don't get the answer here...
    http://www.macfixitforums.com/php/postlist.php?Board=OfficeX

  • Problem with Microsoft office since new firefox installation

    I have never had a problem with Microsoft Office --ever. I can have 4+ windows open at once. Since installation the latest version of Firefox many things have changed. The most troublesome is that I cannot open any office programs (word, excel, etc). They try to open and then give me an error message.

    Victorymarketin, welcome to the forum.
    Since they are both Microsoft programs, I suggest contacting MS Customer Service for help.  They have always gotten me up and running in short order.  This is always my solution when I have MS related problems.  They if anyone can, will solve your problem.
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • Problems with Microsoft Office 2008 and 2011

    Hiya,
    I am running Mountain Lion on my Macbook Pro and I'm having ongoing problems with the Office system. I'm doing a PhD so I use footnotes all the time and in Word 2011, the autosave function makes the footnotes disappear from the bottom of the page, but I'm not comfortbale working wihtout autosave running. I deleted Office 2011 and put Office 2008 back on my machine. However, since I re-installed Office 2008, the whole OSX seems to have slowed down.
    Could Office 2008 cause my whole system to get sluggish? Is there anything that I can do about it?
    I am also wondering if there is there another solution to my original Office 2011 problem with footnotes that doesn;t involve disabling autosave? Has anyone else has similar problems with footnotes? I just wiped my whole system and re-installed all the programmes, so I am surprised to still be having these same problems with Office!
    Thank you for any help and advice! 

    You should try asking your Office for Mac question in the Office for Mac forums where the Office for Mac gurus hang out.http://answers.microsoft.com/en-us/mac?auth=1

  • Problem with microsoft virtual WiFi Miniport adapter

    Hi, I am Shakil Rahman. For last 4-5 days, the wireless interent connection has not been working. I have tried to figure out the problem with the aid of internet since I am not so efficient about computer. According to the information obtained from internet,
    the problem is with microsoft virtual WiFi Miniport adapter and there is a 'Triangle symbol' (Symbol of attention) unlike Atheros AR5B93 wireless network adapter and Broadcom Netlink (TM) Gigabit Ethernet under the 'Network Adapters' title. In this circumstances,
    how can I fix this problem to enable wireless connection? I would be grateful if you help me out.

    Hi Shakil Rahman
    You can try to uninstall your WIFI adapter driver in your Device Manager, then reboot your computer, the system will find and reinstall the driver automatically.
    If there is no use, please contact your computer manufacture for further  help.

  • Ios 6.1.2 has got the same Problem with Microsoft Exchance Server then Ios 6.1 Version

    I've got Problems with Websites wich using Microsoft Exchance Server. I type in my Text in the Mask an the Website send me an Error.
    My Ios ist the latest Version 6.1.2. I hope Apple will fix this Bug in the next Update.

    victorgurtovoy wrote:
    After renovation before 6.1.2 my iPhone 4S became better to keep the charge to batteries! The Statistics of the use: rotational latency 5 days 6 hours. Time of the use 4 hours. On telephone Wi-Fi enclosed constantly.
    Is that google translate?
    what is rotational latency?
    wifi enclosed constantly?
    После каждого апдейта, люди приходят и жалуются. Процедура проста.
    1. создать бэкап
    2. переставить ОС
    3. переставить бэкап
    если проблема существует по прежнему сделай первые две и не используй 3.
    How is my google translate?

  • Problem with Microsoft ODBC for Oracle Driver

    I tried to import table in MS Access with Microsoft ODBC for Oracle Driver, but a msg error appeared:
    "Reserved error (-7776); there is no message for this error"
    I think the problem is about Microsoft Jet, but i'm not sure.
    Does anybody already had this problem?

    Given that you're using a Microsoft front-end and a Microsoft ODBC driver, I'm not sure how much help you'll find on this forum. You could try substituting the Oracle ODBC driver to see if that improves anything.
    Justin

  • If I change from snow lepard to lion - will I have problems with microsoft office?

    I want to chang from snow lepard to lion. Will I have problems with my installed microsoft office?

    not unless it is a version '04 or earlier.  If it is, it won't work in Lion.  '08 and '11 work fine.

  • Snow Leopard Problems with Microsoft Office 2004

    I installed Snow Leopard about two months ago. Ever since I have nad problems opening Microsoft Worrd 2004. Every time I try to open Word it hangs up at "Optimizing font menu performance..." Before I installed Snow Leopard I had no problems with any Office 2004 applications. I also have a lot of problems with fonts when I open Safari.

    This message occurs whenever your installed fonts change. I work for a publisher so was getting it all the time as I turned fonts on and off for different projects.
    In Office 2004, do this:
    1. Go to */Applications/Microsoft Office 2004/Office/Support Files/*
    2. Rename or move FontCacheTool. (Requires administrator access)
    In Office 2011, do this:
    1. Go to *~/Library/Preferences/Microsoft/Office 2011/*
    2. Delete *Office Font Cache*
    3. From Terminal, type touch" then drag in the Office 2011 folder
    4. Back in the Finder, do Get Info on the new, empty *Office Font Cache* file. Make it read only and lock it.
    Notes:
    1. WYSIWYG menus will now just show the font name in standard font.
    2. You may be able to disable the 'optimising' message more easily by going to Word's preferences and turning off the 'WYSIWYG font and style menus' tick box in the General section. This takes affect in all Office applications but doesn't seem as reliable at preventing the caching problem.
    4. Newly added fonts should still appear when you next start an Office application.
    3. However you have Office set up, it can't see certain fonts. They are the ones logged to Console, e.g.:
    12/04/2011 09:58:14 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/fontd[21782] ATS Font family could not be created for Abaton ITC Std - Legacy Applications may not see this font

  • Problems with Microsoft Office 08

    Hi I am new to this discussion stuff, but I seem to have got a problem with updating my Office 08 to the 12.1.0 version on my Macbook. The problem is that it starts the installation process, but then stops right at the start and never does anything. Hope someone can help me with this.
    thanks
    -Emil

    Pancenter wrote:
    Actually, MS is very good about answering questions regarding their software, never had to wait more than 24 hrs for a response. The MS Office forum may have "live chat" running as well.
    pancenter-
    Agreed. Both Microsoft and Apple are great at customer service. It's the thing that drives customers back to their company for the products and/or services they provide to the customer.
    I've had a Windows Server 2008 product activation issue, they quickly resolved it. Same with Apple with my old defective Macbook. Both companies did an excellent job at doing that. However, I won't give kudos to Microsoft's XBOX tech support team. Sometimes they don't know crap about what they are doing.
    deltatux

  • Download causing problems with Microsoft Word

    Hi  - I’ve downloaded Acrobat Standard subscription.
    Because I couldn’t find a download button, I contacted an Adobe forum and was given another link, which allowed me to download (though with no product key – is that normal?)
    What has happened is this:
    During the downloading process, I was told to close other programmes, including Word – which I did. I was told that Word was not closed, but it appeared to be so I continued anyway…
    I now have the problem that each time I try to open a Word doc., I get the long message that I’ve copied in below relating to a problem with/absence of macros.
    Eventually I can open the Word doc by clicking the OK button 5 or 6 times – the message goes at last and I can continue. So not I’m not completely incapacitated, but it’s clearly a problem.
    I’ve been in touch with Adobe by phone; but in the end your colleague couldn’t help.
    So… I’m wondering – can I uninstall the programme and start again? Or might there be another way around this? I’ve tried repairing Word, but that has made no difference.I don't think I have a Serial Number.
    Thanks - Laurence

    Windows 2007
    Mozilla Firefox
    Struggling to get a screen shot because I am blocked from any other actions til I get rid of the error message! However, the message reads: "The function you are attempting to run contains macros or content that requires macro language support. When this software was installed you chose not to install support for macros or controls.
    "This error usually occurs because of macro security settings. If you know that the macro comes from a source that you trust, you can change your macro security settings to allow you to enable the macro. The way that you change your macro security settings depends on the Microsoft Office System program that you are using.
    Microsoft Office Access, Microsoft Office Excel, Microsoft Office PowerPoint, or Microsoft Office Word --
    To check your macro security settings, click the Microsoft Office Button, click <program name> Options, click Trust Center, and then click Trust Center Settings.
    If macro security is set to Disable all macros without notification, all macros are automatically disabled. Use the following procedure to enable the macro.
    In the Trust Center dialog box, click Macro Settings, and then click Disable all macros with notification.
    Click OK in the Trust Center dialog box to apply the new setting. Click OK to close the program options dialog box.
    Close the file and the Microsoft Office program that you are using.
    Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.
    When you have enabled the macro, it is recommended that you return the macro security setting to Disable all macros without notification.
    If macro security is set to Disable all macros with notification, but you selected Disable when prompted by the macro warning dialog when you opened the file, use the following procedure to enable the macro.
    In the Trust Center dialog box, click Cancel. Click Cancel to close the program options dialog box.
    Close the file and the Microsoft Office program that you are using.
    Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.
    If macro security is set to Disable all macros except digitally signed macros, the macro may not have been digitally signed. Verify that you can trust the macro before using the following procedure to allow it to run.
    In the Trust Center dialog box, click Cancel. Click Cancel to close the program options dialog box.
    Close the file and the Microsoft Office program that you are using.
    Open the file again. A Security Alert appears in the Document Information Bar just below the ribbon. Click Enable Content to allow the macro to run.
    Microsoft Office Outlook, Microsoft Office Visio, or Microsoft Office Publisher --
    To check your macro security settings, on the Tools menu, click Trust Center, and then click Macro Security.
    If macro security is set to No warnings and disable all macros, all macros are automatically disabled. Use the following procedure to enable the macro.
    In the Trust Center dialog box, click Warnings for signed macros; all unsigned macros are disabled, and then click OK.
    Close the file and the Microsoft Office program that you are using.
    Open the file again. When prompted, click Enable Content to allow the macro to run. If you are using Visio, the Enable Content button appears as part of a Security Alert in the Document Information Bar. If you are not prompted to enable the macro, or if you receive this error again, the macro may not be digitally signed. Verify that you can trust the macro. If you are certain that you can trust the macro, use the next procedure below to enable the macro.
    When you have enabled the macro, it is recommended that you return the macro security setting to No warnings and disable all macros.
    If macro security is set to Warnings for signed macros; all unsigned macros are disabled, the macro may not be digitally signed. If you are certain that you can trust the macro, use the following procedure to enable the macro.
    In the Trust Center dialog box, click Warnings for all macros, and then click OK.
    Close the file and the Microsoft Office program that you are using.
    Open the file again. When prompted, click Enable Content to allow the macro to run. If you are using Visio, the Enable Content button appears as part of a Security Alert in the Document Information Bar.
    When you have enabled the macro, it is recommended that you return the macro security setting to Warnings for signed macros; all unsigned macros are disabled.
    Microsoft Office Project --
    To check your macro security settings, on the Tools menu, click Macro, and then click Security.
    If macro security is set to Very High, use the following procedure to enable the macro.
    In the Security dialog box, click High, and then click OK.
    Close the file and Microsoft Office Project.
    Open the file again. When prompted, click Enable Content to allow the macro to run. If you are not prompted to enable the macro, or if you receive this error message again, the macro may not be digitally signed. Verify that you can trust the macro. If you are certain that you can trust the macro, use the next procedure below to enable the macro.
    When you have enabled the macro, it is recommended that you return the macro security setting to Very High.
    If the macro security setting is set to High, the macro may not be digitally signed. If you are certain that you can trust the macro, use the following procedure to enable the macro.
    In the Security dialog box, click Medium, and then click OK.
    Close the file and Microsoft Office Project.
    Open the file again. When prompted, click Enable Content to allow the macro to run.
    When you have enabled the macro, it is recommended that you return the macro security setting to High.
    This error may also occur for the following reasons:
    The certificate of trust that is attached to the macro is invalid. Unless you are certain that the macro is safe, it is recommended that you not trust or run the macro.
    The certificate is no longer trusted, was revoked by the issuing authority, or is damaged. Unless you are certain that the macro is safe, it is recommended that you not trust or run the macro.
    Visual Basic for Applications (VBA) is not installed on your computer. In this case, no VBA macro can be run, regardless of whether the macro has a valid certificate of trust. You or your administrator may have chosen not to install VBA, or the version of Microsoft Office that you are using may not install VBA by default. If your version of Microsoft Office does not provide VBA as an installable feature, you can upgrade to a version that provides VBA support.
    If you are unable to change the security settings, it is possible that another program has locked the security settings. Close all Microsoft Office System programs, then restart your program and change the security settings.
    More information about this error message online."

Maybe you are looking for