Problem with Mission Control

I've just installed the Safari 6.1.1 and iTunes 11.1 updates. For some reason this seems to have affected Mission control on my computer (late 2011 Macbook pro running Mountain Lion).
I can now no longer highlight and select the large desktop window in Mission Control (the one that open apps appear above). This is really annoying as it makes navigating around much more of a hassle now.
Does anyone have any ideas? I've tried repairing Disk permissions already. Thanks.

I'm surprised that given the usual hysteria over anything new that Apple brings out Apple didn't realise that providing this upgrade solely via a downloading method may cause a few problems upon its release!!

Similar Messages

Maverick causing problems with mission control

hi,
I have a early 2013 Mac book pro. I just upgraded to Maverick and I have been facing issues with mission control. When I swipe fingers up on touchpad to open Mission control, occasionally it lags. Basically the lagging is prevelant with swipe and pinch gestures on touchpad, the transitions are not smooth. Please help me fix it.
Thanks in advance,
Kritarth

I'm not sure that what I'm seeing is this same problem, but it's similar. And worse.
I have a MacBook Pro (Retina, 15-inch,Early 2013), and several times since I installed Mavericks both Mission Control and 4-finger swiping have stopped working completely. A restart always fixes them. They both fail at the same time--either both work completely, or both don't work at all.
I'm guessing there's a lurking Mavericks bug, somewhere.
Ed

Problem with mission control after 10.7.2 update

After I updated to 10.7.2, when I swipe into mission control then select a different app with the spacebar then swipe back out of mission control, the menu bar on the top does not switch to the new app, it stays as the previous open app. But, if I click on the new app instead of using the spacebar then the menu bar switches correctly. Is anyone else having this problem?

I have had the same issue since initial 10.7.0 install. Doesn't seem to affect function at all.. but disconcerting nonetheless. I have yet to find anything acknowleding the problem or how to fix it.

Problem in mission control : placement of the desktops isn't memorized

Hi everyone!
It's my first topic here, so please, be kind if I'm not respecting the rules...
Here is my problem :
Today, I'm doing some HTML coding in textwrangler, and testing the pages with safari on a second desktop. I'm opening the pages in safari with a finder window opened in a third desktop. I'm on my macbook pro and i'm switching desktops with the 4 fingers technique. I have placed the desktops in that order :
1) Textwrangler
2) Safari
3) Finder
When i'm using the 4 fingers and go into the finder to look after a page, trying it into safari, the order is changed :
1)Textwrangler
2) Finder
3) Safari
Is anyone encountering something like that with mission control? Do you know how to fix it? I hope you'll be interested in my problem.
Thank you!
Nelson

Thanks a lot, I hadn't seen the options in preferencies... Let me go buying glasses!
Nelson

Stickies used to move to any desktop with mission control. Now it only stays on 1 screen. Floating is enabled. Any solutions?

Stickies used to move to any desktop with mission control. Now it only stays on 1 screen. Floating is enabled. Any solutions?

Take the MBP to an Apple store genius bar and have them evaluate it. This is a free service. They may tell you what needs to be fixed and the associated costs. You are no obligated to to have them perform the repairs. But you will have a better understanding of the problem(s).
Ciao.

Problem with Table control lines

Hi Friends,
This is the problem with table control lines:
I have screen with table control and I would like change the table control lines dynamicaly.
Exp:
In my PBO the Internal table which I am using to loop the TC is havig 7 records and its displayed with 7 records, now I have added one more record into my ITAB and now ITAB is having 8 records, when I am looping this ITAB with TC its taking the TC lines 7 only.
here is the code:
Initial values in gt_scr400 = 8
Initial values in tc_scr400 = 8
Now added one more recor into gt_scr400 , now gt_scr400 = 9.
LOOP AT   gt_scr400
       INTO wa_scr400
       WITH CONTROL tc_scr400
       CURSOR tc_scr400-current_line.
ENDLOOP.
I have used this logic :
DESCRIBE TABLE gt_scr400 LINES g_rec_300 .
tc_scr300-lines = g_rec_300.
but its not modifying the lines in my table control.
How to change the TC lines based on ITAB total records.
Thanks,
Sridhar

there is a field in TableViewName-xxx
don't remember the exact field name for (total no of records)
you can check it in debug. when you add records in Internal table, u need to modify this field which is set at the first time when table control is populated.

Who else has a problem with parental controls enabled not being able to run Firefox on the Mac?

Who else has a problem with parental controls enabled not being able to run Firefox on the Mac? (Any solutions?) (BTW. Chrome doesn't work either)

Although FF4 is so nice I'm almost ready to ditch iGoogle!
Please fix what appears to be an RSS/iGoogle issue with FF4...
Gmail is fine, but titles dont show in most RSS feed gadgets and no stories, strangely, apart from this one:
http://www.google.com.au/ig/directory?hl=en&url=www.google.com/ig/modules/builtin_news_technology.xml
Which if you enter the last part of the url reports that
"<Content type="html">
This is a builtin module, so the UserPrefs and Content are ignored."
Any ideas?

Keyboard problem with T410 - Control Key

I have a problem with the control keys on the keyboard of T410.
I swapped my X200 keyboard over to T410 to check if it is software or hardware issues. With the X200 keyboard, the 'Ctrl' key is not working. With the T410 keyboard, 'e', 'd', 'c' and 'Ctrl' keys are not working.

Welcome to the forum!
I believe that X200 and T410 keyboards are mapped differently in BIOS.
Can you find another T410/T510 keyboard to test with?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

URGENT ! JDEV 10.1.2 Problem with data control generated from session bean

I got a problem with data control generated from session bean which return a collection of data transfer object.
The dto's seem to be correct. The session bean load correctly the data into and the object's are plenty of data. Using the console to display the dto content is ok.
When generating a data control from this session bean and associate the dto included in the collection only the first object level and one-to-one dto object are correctly setted in the data control. Object that represent collection into the dto (one-to-many foreign key) are setted as collection with an iterator but the structure of the object is not setted. I don't know how to associate this second level of collection with the dto bean class to obtain the attributes definition.
I created a case with hr schema like the hrApp demo application in the tutorial with departments and employees table. I got the same problem.
Is it a bug ?
It exists a workaround to force the data control to understand the collection data structure ?
Help is welcome ! this is urgent !!!

we found the problem by assigning the child dto bean class to the node representing the iterator in the xml file corresponding to the master dto.

Pb with mission control

Hi,
I've a pb with mission control.
When I swipe three fingers up, I can't see my desktops. I can't see all the app opened.
However, when I swipe three fingers down, I can see all the windows of the same app.
I've tried to repair permissions and restart your computer, but it doesn't work.
Any ideas of what might have happened?
Thank you so much
clement
MacBook Pro (13-inch mid 2012), Mac OS X (10.9.4)

Hi Clem's,
Since this is the only gesture you are having issues with, and the setting is enabled, then you may find more information by using another one of Apple's support resources - https://getsupport.apple.com/GetproductgroupList.action
Take care,
Alex H.

After installing Lion os I cannot see my desktop 1 nor can I see my open windows when I go to finder, I just get the grey/black background that comes with mission control. Any ideas as to how to solve this problem?

The top picture is what my Desktop 1 looks like. And the picture below is what my desktop looks like after clicking mission control. Ive tried changing wallpapers, changing preferences, etc. and I still can't figure out what's wrong. As you can see, on mission control you can't see any of the open windows, or anything that I have placed on my desktop. Any ideas as to how to solve this issue?

Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time.

Dictation interferes with Mission Control - MC shortcuts stop working

I just started using dictation about a week ago, and, although it works great, it seems to be interfering with the Mission Control shortcuts (F9, F10, etc.). The shortcuts just stop working, often after Dictation shows some stuttering (short episodes of freezing, or an inability to switch languages). They never malfunction when I don't use Dictation. After restarting the dock with osascript -e 'quit application "Dock"' everything functions normally, but it gets annoying when you have to do that 10 or more times a day. Does anybody know what's going on or maybe have a fix?
Specs:
27" iMac, late 2009
Processor 3,06 GHz Intel Core 2 Duo
Memory 12 GB 1067 MHz DDR3
OS version OS X 10.9.1 (13B42)
I should probably also mention that I'm using enhanced dictation, and that I've loaded two languages, English and German.

When you next have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above. Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first. Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough. It is never necessary or helpful to post more than about 100 lines. "The more, the better" is not the rule here.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Problem with custom control and focus

I've a problem with the focus in a custom control that contains a TextField and some custom nodes.
If i create a form with some of these custom controls i'm not able to navigate through these fields by using the TAB key.
I've implemented a KeyEvent listener on the custom control and was able to grab the focus and forward it to the embedded TextField by calling requestFocus() on the TextField but the problem is that the TextField won't get rid of the focus anymore. Means if i press TAB the first embedded TextField will get the focus, after pressing TAB again the embedded TextField in the next custom control will get the focus AND the former focused TextField still got the focus!?
So i'm not able to remove the focus from an embeded TextField.
Any idea how to do this ?

Here you go, it contains the control, skin and behavior of the custom control, the css file and a test file that shows the problem...
control:
import javafx.scene.control.Control;
import javafx.scene.control.TextField;
public class TestInput extends Control {
    private static final String DEFAULT_STYLE_CLASS = "test-input";
    private TextField           textField;
    private int                 id;
    public TestInput(final int ID) {
        super();
        id = ID;
        textField = new TextField();
        init();
    private void init() {
        getStyleClass().add(DEFAULT_STYLE_CLASS);
    public TextField getTextField() {
        return textField;
    @Override protected String getUserAgentStylesheet() {
            return getClass().getResource("testinput.css").toExternalForm();
    @Override public String toString() {
        return "TestInput" + id + ": " + super.toString();
}skin:
import com.sun.javafx.scene.control.skin.SkinBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.control.TextField;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputSkin extends SkinBase<TestInput, TestInputBehavior> {
    private TestInput control;
    private TextField textField;
    private boolean   initialized;
    public TestInputSkin(final TestInput CONTROL) {
        super(CONTROL, new TestInputBehavior(CONTROL));
        control     = CONTROL;
        textField   = control.getTextField();
        initialized = false;
        init();
    private void init() {
        initialized = true;
        paint();
    public final void paint() {
        if (!initialized) {
            init();
        getChildren().clear();
        getChildren().addAll(textField);
    @Override public final TestInput getSkinnable() {
        return control;
    @Override public final void dispose() {
        control = null;
}behavior:
import com.sun.javafx.scene.control.behavior.BehaviorBase;
import javafx.beans.value.ChangeListener;
import javafx.beans.value.ObservableValue;
import javafx.event.EventHandler;
import javafx.scene.input.KeyCode;
import javafx.scene.input.KeyEvent;
public class TestInputBehavior extends BehaviorBase<TestInput> {
    private TestInput control;
    public TestInputBehavior(final TestInput CONTROL) {
        super(CONTROL);
        control = CONTROL;
        control.getTextField().addEventFilter(KeyEvent.KEY_PRESSED, new EventHandler<KeyEvent>() {
            @Override public void handle(final KeyEvent EVENT) {
                if (KeyEvent.KEY_PRESSED.equals(EVENT.getEventType())) {
                    keyPressed(EVENT);
        control.focusedProperty().addListener(new ChangeListener<Boolean>() {
            @Override public void changed(ObservableValue<? extends Boolean> ov, Boolean wasFocused, Boolean isFocused) {
                if (isFocused) { isFocused(); } else { lostFocus(); }
    public void isFocused() {
        System.out.println(control.toString() + " got focus");
        control.getTextField().requestFocus();
    public void lostFocus() {
        System.out.println(control.toString() + " lost focus");
    public void keyPressed(KeyEvent EVENT) {
        if (KeyCode.TAB.equals(EVENT.getCode())) {
            control.getScene().getFocusOwner().requestFocus();
}the css file:
.test-input {
    -fx-skin: "TestInputSkin";
}and finally the test app:
import javafx.application.Application;
import javafx.scene.Scene;
import javafx.scene.control.TextField;
import javafx.scene.layout.GridPane;
import javafx.stage.Stage;
public class Test extends Application {
    TestInput input1;
    TestInput input2;
    TestInput input3;
    TextField input4;
    TextField input5;
    TextField input6;
    Scene     scene;
    @Override public void start(final Stage STAGE) {
        setupStage(STAGE, setupScene());
    private Scene setupScene() {
        input1 = new TestInput(1);
        input2 = new TestInput(2);
        input3 = new TestInput(3);
        input4 = new TextField();
        input5 = new TextField();
        input6 = new TextField();
        GridPane pane = new GridPane();
        pane.add(input1, 1, 1);
        pane.add(input2, 1, 2);
        pane.add(input3, 1, 3);
        pane.add(input4, 2, 1);
        pane.add(input5, 2, 2);
        pane.add(input6, 2, 3);
        scene = new Scene(pane);
        return scene;
    private void setupStage(final Stage STAGE, final Scene SCENE) {
        STAGE.setTitle("Test");
        STAGE.setScene(SCENE);
        STAGE.show();
    public static void main(String[] args) {
        launch(args);
The test app shows three custom controls on the left column and three standard textfields on the right column. If you press TAB you will see what i mean...

Problems with remote control and user accounts - error 1759?

We're running:
-XP Pro SP2 clients with Zen SP1 IR3a agent, 4.91 SP2 Netware client.
-We are NOT running Middle Tier.
-Novell servers are running Netware 6.5 SP7, E-directory 8.7.3.10b or 8.8.
-Zen server is also SP1 IR3a.
We have no problem using remote control on workstation objects. We are having intermittent issues with remote controlling user objects. When the issue occurs, we receive the following error, "Error 1759: The selected user is not logged in on any workstations" even though the user is in fact logged in. After some more research, it appears that the "networkAddress" attribute of the user object is blank so we feel that this is the root cause. My question is what would cause the networkAddress attribute to randomly not update? For instance we had a user (verified his login) who we could not remote via the user object (workstation object worked). We checked his networkAddress attribute and found that it was empty. User rebooted and logged in again and his networkAddress attribute populated, and then we could remote control him via the user object. Now this isn't always the case after a reboot. There doesn't appear to be any pattern to when the networkAddress attribute does or does not update. In fact, this particular user has a laptop so he boots it up fresh every morning yet he was not showing a network address when he logged in initially today.
We've followed the troubleshooting steps in Novell Documentation without any success. Is there anything else that we might be missing, especially with respect to getting the networkAddress attribute to update? We ran a DSreport on that attribute and found about 500 out of a total of 1500 users had no networkAddress. Some of those are sure to be legitimate but that number is much too high for the number of people that should be in the office.
I've read some older threads on the subject but none of them really provide a firm solution. Also most of the older threads reference Middle Tier which we are not using.
Thanks in advance.

> 4.91 SP2 Netware client.
You could try this TID:
"A user will no longer have an entry in their "Network Address" attribute
even though they are logged into the eDirectory Tree."
http://www.novell.com/support/viewCo...1262&sliceId=1
"Resolution"
"This was fixed in the 4.91 SP3 client. NWFS.SYS was modified so that it
will check the monitor connection on a reconnect and if it is not connected
close the connection and try and get a new monitor connection to the tree.
Prior to the 4.91 SP3 client, the solution is to have the user login again
so that it issues the NDS Finish Login request again that will populate
Network Address again."
Regards
Rolf Lidvall
Swedish Radio (Ltd)

Problem with remote control and Windows 7 - HP Pavilion 6301eu

I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

Problem with Mission Control

Similar Messages

Maybe you are looking for