Problem with mitsubishi lancer gts
My Ipod touch connected fine with my mitsubishi lancer gts, I updated the IOS and simply failed to connect. I took my car to service and the updated the car's software. Now the stereo says its loading, but never starts to play music! Is there an app or an update that can fix that problem or I'll must install the Aux input jack.
The following works sometimes. But sometimes you have to wair for an update to the iOS or the car system.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
Similar Messages
-
Is the latest ipod touch compatible with the 2011 Mitsubishi Lancer Ralliart?
I recently replaced an older iPod touch with a new iPod touch. The older touch synced with my 2011 mitsubishi lancer. Granted it took the two awhile to communicate but they always synced. I just got the new iPod touch on Feb 3 and tried to sync it with my lancer. It actually syned very quickly and worked perfectly. After I came out of Best Buy to go home, I plugged the touch in again and this time it just said iPod loading..... After about 5 minutes I unhooked the iPod and went back to sirius. Now iPod loading is all I get now....
Yes, it's compatible. Try using Disk Utility to reformat the Nano to see if that helps. Here are instructions on how to reformat your iPod using Disk Utility.
How to Reformat Your iPod on a Mac
B-rock -
Big problem with AE CS3 - abnormal slow with nvidia 8800 GTS 512 !
I try everything, newest drivers (nvidia 8800 GTS 512), older drivers, beta drivers, alternative drivers, uninstall QTime, disable OpenGL in After Effects, delete openGL plugin.... Simply, did not help. AE CS3 is abnormal slow, type text, draw and edit mask, any kind of moving element , moving windows (interface).... everything. When turn on openGL, openGL work fine, fast, smooth., but non openGL operation (written above), still the same! I did some test and found that similar problem have with encore (not my primary application, but...). Other programs work perfectly (premiere, photoshop, illustrator). I have core2 quad 6600 @ 3 GHz, 3 GB RAM, 8800 GTS 512 @ 2560 x 1600, win XP pro strong configuration but unusable for AE CS3!!! I try to reduce resolution, but also, did not help.
Please, is there anyone with some solution? Is problem with AE or drivers? Thanks.>My 8800GT is not going to work with AE and it's listed under Adobe's
>supported graphic cards????
That's premature to say. Please understand that in the OpenGL game there are just too many varaibles, a lot of them outside the control of Adobe or any other software vendor for that matter. Please consider the following:
- if tested, a card is usually tested in one configuration available at the time that presumably will be the most common one bought by users. There is room for better sub-versions (more VRAM, higher memory clock), as well as weaker ones (less VRAM, lower clock speed).
- the previous applies to the host computer. Nobody can test the 100 new different motherboards that come out every month let alone all that are already on the market. Same for RAM, processors, other peripherals.
- multiple vendors may produce cards based on the same design, but may use different BIOSes and branding
- even under ideal conditions, a given graphics card will be tested in about 30 different computer or so - some in Adobe's lab, others with Beta testers. As it stands, neither of them will necessarily coincide with your configuration nor will anyone throw a lot of money out of the window just to buy a hundred new testing machines...
- BIOS configuration, motherboard voltage fluctuations, PCI timings and whatnot can vary from user to user and thus have drastically different influence how a certain component behaves.
- lastly, driver configuration can vary. Even with seemingly the same driver version, the config may auto-adapt to different settings based on the environment it finds.
So given all of the above, please understand that this is a *******' tough job and by all rights nobody intentionally tries to scam users or something like that. You will also find it hard to blame anyone in legal terms, as you usually agree to use the software "as is" - with all it's flaws. As David says - please try first. We will gladly try to help you sort out any issues and who knows - none of the problems affecting other users may come down on you and you'll be a happy camper after all.
Mylenium -
Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?
Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
All worked OK with ISO 6.Hello CraigNicholson
You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
Regards,
-Norm G. -
Problem with InDesign CC redrawing the screen too slow while using Zoom tool
Hello. I got a problem with InDesign CC redrawing the screen too slow while using Zoom tool. Sometimes it takes more than a secong to zoom in or out. However InDesign CS6, Photoshop CC, Illustrator CC works just fine. What could be the problem, videocard or something else? Below is my PC configuration: OS Windows 8 Pro (x64); processor Intel Core i7 2600k CPU 3,40GHz; video adapter NVIDIA GeForse GTS 450; monitor NEC PA271W (2560x1440).
Yes it’s a bug. The trick is to select the tool and then left click the photo information strip and hold for a few seconds until you see the windows bar at the top of the screen (not responding)
The lasso tool should then work normally. -
Hi,
I've had a browse through the forum, and some of the posted problems do have a relation to mine, but mine are a bit more "weirder".
I have a XP2000 CPU, K7N2-L, 512DDR Pc2100 RAM. I am using PCI slot1 for my modem, and AGP slot for my GF2MX.
Anyway, I installed everything into the case, I have a 300Watt PSU btw. Switched the thing on for the first time and nothing happened. I looked at the DLED, and it was hung on memory test. So I took it out, and put it in DIMM 2 (previously been in DIMM 1). Switched here on, and it booted but for only a short while, then i restarted. I then swapped it in to DIMM 3, and am now able to use my computer.
Anyway., I installed windows xp, all the drivers. Now then, a problem must have developed as I started getting BSOD's such as:
MEMORY_MANAGEMENT
BAD_SYSTEM_CONFIG_INFO
PAGE_FAULT_IN_NONPAGED_AREA
DRIVER_IRQL_NOT_LESS_OR_EQUAL
I had this problem with a previous system and with that, I just ran the CPU and DDRAM at lower speeds.
So thats what I did, I managed to quickly get into BIOS and change the CPU to 100Mhz, and Ram to 100Mhz too. Now I am running my XP2000 at 1.25Ghz, 75% of its capacity and my system is stable.
However! I still get some strange problems when I sometimes switch on the pc, or restart it. Sometimes I just get a blank screen and the DLED has hung on the Memory test. I have to take the power cable out to turn off the PC, and then wait about 5 seconds, put it back in, and i might be lucky to get it started. Sometimes after about 10 tries of doing this, I just have to reset BIOS and try again, and go through the BIOs settings again.
I am now running a stable computer, but the DDRAM is at 100Mhz, and the CPU is at 100Mhz so I am not getting my full potentioal out of my components. CPU temp is 48*C btw.
What do you think I should do?I agree with all the above. AMD recommend at least 15A on the 12V rail with a peak output of 18A. I've run a stable system with a 300W PSU, similar in power rating but I had a slightly lower consumption:
Athlon 1.4
SiS715 chipset
256MB DDR
CDRW
CDROM
Geforce2GTS
Network card
USB webcam
USB mouse
|Running from: 10/05/02 22:05:59 till: 11/05/02 13:19:43 |
+-----------------------------+----------+----------+----------+----------+
|Sensor | Current | Low | High | Average |
+-----------------------------+----------+----------+----------+----------+
|CPU Temp | 48° C | 31° C | 48° C | 46° C |
|Case Temp | 27° C | 23° C | 27° C | 26° C |
|Sensor 3 | 1° C | -5° C | 2° C | 0° C |
|Core 0 | 1.79 V | 1.79 V | 1.79 V | 1.79 V |
|Core 1 | 2.48 V | 2.46 V | 2.48 V | 2.48 V |
|+3.3 | 3.28 V | 3.26 V | 3.31 V | 3.30 V |
|+5.00 | 4.88 V | 4.80 V | 4.88 V | 4.85 V |
|+12.00 | 12.85 V | 12.78 V | 13.04 V | 12.91 V |
|-12.00 | -11.86 V | -11.86 V | -11.80 V | -11.86 V |
|-5.00 | 0.00 V | 0.00 V | 0.00 V | 0.00 V |
|Fan 1 | 4500 RPM | 4500 RPM | 4623 RPM | 4562 RPM |
|Fan 2 | 2884 RPM | 2812 RPM | 2909 RPM | 2890 RPM |
|Fan 3 | 0 RPM | 0 RPM | 0 RPM | 0 RPM |
|CPU0 | 35.00 % | 0.00 % | 100.00 % | 48.64 % |
+-----------------------------+----------+----------+----------+----------+
This PSU was fine with this particular setup:
3.3v=15A
5V=25.0A
12V=7A
Piii600 o/c to 800
Geforce2 GTS
IDE card
CD-ROM
CD-RW
Maxtor 7200rpm HDD
TV tuner
10/100 Network Card
2 sticks pc133
2 system fans
fairy lights
USB devices - scanner, mouse, digital camera.
Bearing in ming that the piii doesn't draw from the 12v rail, it's quite enlightening.
Have a look at your voltages in the bios. This will help to find out wether it is a psu or memory related problem. At a guess:
If 3.3V are constantly less than 3.3v
And 5V are constantly less than 4.9v
And 12V is less than 11.89v
edit:
As far as I have found, voltage tolerance should be
Which translates to
3.3V +/-4%= 3.186-3.432V
5V +/-5%= 4.750-5.250V
12V +/-5%= 11.4V-12.6V
Then a new PSU may help stability. I'll try to find out what the operating parameters actually are and give some better figures at a later date. Some PSU's will happily supply 110-120% of their rated wattage before blowing some capacitors (heh, I've managed to actually do this).
[ALIGN=center]-------------[/ALIGN] MEMORY_MANAGEMENT
BAD_SYSTEM_CONFIG_INFO
PAGE_FAULT_IN_NONPAGED_AREA
DRIVER_IRQL_NOT_LESS_OR_EQUAL
These bsods suggest bad ram.
We are of course assuming that you've done a clean install - the previous operating system has been removed, either by formatting or renaming.
If you are underclocking, you are both reducing the power needed for your system, and the strain on memory. There is one thing for certain - it's hardware. Sometimes re-seating your components helps. -
Hello, I'm new in java development, and I'm french with a student English, sorry if that I say is strange is the expressions.
I have a problem with network streams and serialization.
I want to establish a connection between 2 apps, on 2 different computers. For the development, the tests are local (IP : 127.0.0.1)
The problem : I send 4 bytes and I flush after, and I receive 6 bytes. To know what is transmitting on the connection, I override the OutputStream class.
I think that the flush() method produces 2 bytes but i don't think how.
I put you the codes follow :
Thanks for any help.
The sender function :
// This function is called when the user want to send data to another user.
// This piece of function establishing the connection between 2 users.
public int startListeningForNFT(String senderUserName, int indexOfSender) {
System.out.println(senderUserName + " demande à " + this.userName + " de démarrer la procédure de réception.");
/* Cette fonction est l'interface ente le serveur et le client2,
* elle retourne le port et l'IP que le client2 le lui a renvoyé. */
/* This function send an Integer which will trig a reception function in the receiver
This function is called in a Thread. */
try {
this.oos.writeObject(44);
this.oos.flush();
System.out.println("On a bien envoyé OBJ2AskerInfos sur le port " + portToListen);
byte b = this.ois.readByte();
System.out.println("Byte = " + b);
b = this.ois.readByte();
System.out.println("Byte = " + b);
b = this.ois.readByte();
System.out.println("Byte = " + b);
b = this.ois.readByte();
System.out.println("Byte = " + b);
b = this.ois.readByte();
System.out.println("Byte = " + b);
catch (IOException e) { e.printStackTrace(); }
return Constantes.PORT_DATA;
}The receiver function :
public class ClientClient implements WindowClient {
// This 3 attributes are initalized correctly.
private Socket comSocket;
private String comPort;
private String userName;
public ClientClient() {
try {
comSocket = new Socket(ipToJoin, Integer.parseInt(comPort));
oos = new ObjectOutputStream(new DebugOutputStream(comSocket.getOutputStream()));
ois = new ObjectInputStream(comSocket.getInputStream());
oos.writeObject(userName);
oos.flush();
ThreadInputListener til = new ThreadInputListener();
til.start();
catch (UnknownHostException e) { e.printStackTrace(); }
catch (ClassNotFoundException e) { e.printStackTrace(); }
catch (IOException e) {
e.printStackTrace();
JOptionPane.showMessageDialog(null, ("Auncun serveur n'a été trouvé sur l'adresse indiquée :\n" + ipToJoin), "Erreur", JOptionPane.ERROR_MESSAGE);
public class ThreadInputListener extends Thread {
@SuppressWarnings("unchecked")
public void run() {
try {
while(true) {
Object receivedObject = ois.readObject();
// Si l'objet reçu est un OBJ2InfosOnAsker => Renvoyer le port.
// If received Object is an integer
if(receivedObject instanceof Integer) {
System.out.println(userName +" a bien reçu l'objet OBJ2InfosOnAsker...");
System.out.println(userName +" a bien reçu int." + receivedObject);
System.out.println("On lance les 4 int :");
// Send 4 bytes to the sender (control bytes, just for solve the problem)
oos.writeByte(7);
oos.writeByte(8);
oos.writeByte(9);
oos.writeByte(10);
oos.flush();
System.out.println("...et a bien envoyé le port");
catch (IOException e) {
// ArrayList<HostClient> temp = new ArrayList<HostClient>();
// temp.add(new HostFictiveClient(userName));
// fenetreprincipale.updateClientList(temp);
fenetreprincipale.addDiscution("Vous avez été déconnecté du serveur.");
catch (ClassNotFoundException e) { e.printStackTrace(); }
}The override function of OutputStream :
public class DebugOutputStream extends OutputStream {
private OutputStream os;
public DebugOutputStream(OutputStream os) {
super();
this.os = os;
@Override
public void write(int b) throws IOException {
System.out.println("ClientClient envoie " + b + " soit " + ((char)b));
os.write(b);
}The sender function says :
Host demande à User1 de démarrer la procédure de réception.
On a bien envoyé OBJ2AskerInfos sur le port 3001
Byte = 4
Byte = 0
Byte = 7
Byte = 8
Byte = 9And the receiver function says :
User1 a bien reçu l'objet OBJ2InfosOnAsker...
User1 a bien reçu int.44
On lance les 7 int :
ClientCLient envoie 119 soit w //
ClientCLient envoie 4 soit // Both of this lines are stranges
ClientCLient envoie 7 soit
ClientCLient envoie 8 soit
ClientCLient envoie 9 soit
ClientCLient envoie 10 soit
...et a bien envoyé le portMinimus wrote:
Ok, but this layer has maid just to print in the eclipse console the bytes written on the stream, With or without this function, the flush() operation generate 2 bytes, I don't know why.
When I want to send manually the byte '7', the result of both lines :
oos.writeByte(7);
oos.flush();is that my writeByte and my flush send 3 bytes :
Byte val = 119 charcode = w
Byte val = 1 charcode =
Byte val = 7 charcode =
Only the 'Byte val = 7 charcode = ' line is good.
Why the flush generate 2 unknown bytes at this code position ?Actually, it's (might be) writing more than two bytes. Run this:
public class OOSTest {
public static void main(String[] args) throws Throwable {
ByteArrayOutputStream baos = new ByteArrayOutputStream();
ObjectOutputStream oos = new ObjectOutputStream(baos);
oos.writeByte(7);
oos.close();
byte[] bytes = baos.toByteArray();
System.out.println(Arrays.toString(bytes));
//prints "[-84, -19, 0, 5, 119, 1, 7]"
}The explanation is in the Javadoc for ObjectOutputStream:
Primitive data, excluding serializable fields and externalizable data, is written to the ObjectOutputStream in block-data records. A block data record is composed of a header and data. The block data header consists of a marker and the number of bytes to follow the header. OOSs should only be used when the OIS is being used properly on the other end. If you don't want this header, use a DataOutputStream. Is there an actual problem or are you just confused about the extra bytes? If there is a problem in reading, my guess is that you're somehow not reading from your OIS symmetrically with your OOS. Can you post a complete, compilable example that demonstrates the behaviour? There's obviously an issue somewhere, I just haven't spotted it yet.
If there wasn't an actual problem in reading, well: there's your explanation.
Edited by: endasil on 26-Oct-2009 10:55 AM -
Weird install problem with OS X, please help!
I've been upgrading a friend powerbook firewire 400Mhz G3, we installed 1GB of memory and put in an 80GB HD. I partioned so that OSX can be on the first 8GB, put 9.1 on the second parition of 7GB, upgraded the firmware, and i think i have tried just about everything i could find here on the discussion board.
I have several versions of X including the first version, panther (retail), and tiger (borrowed, on DVD). tiger and the original version get as far as installing, then go into kernal panic (you must restart right now.....etc). 10.2 just gts to the apple screen then a white jagged bar pops up.
i'm at a loss. i really don't know what i try to make this better, any help is greatly appriciated!!!!
oh, and the memory seemed fine when her original 6GB drive was in there, which had tiger installed.
jjhw1,
I will just run by you some potential causes for your problem and hope that one hits the target.
- I will ask, out of curiosity, why you are making an 8GB partition for OSX? This limitation applies only to the older Wallstreet powerbook. There is no need to partition the HD unless you have a specific reason.
- Since the HD is new, and you still want to run Classic and also boot 9.x, make sure you install the MacOS 9 HD driver, an option in OSX's Disk Utility when erasing an HD, or go ahead and install OS 9.x first...this will automatically install the OS9 HD driver. If you install OSX first on a clean HD without installing the OS9 HD driver, MacOS 9 will run fine in Classic under 10.x but 9.x will no longer boot.
http://docs.info.apple.com/article.html?artnum=107285
- The Pismo has a history of failing DVD-ROM drives and usually the CD-side starts acting up first. If you have access to another Pismo or Lombard, swap drives and try the install. If you have access to a FireWire CD-RW, you can also boot OSX CDs using it.
- Reset the PRAM if you have not done so.
- You may have dirty or bad CDs; carefully clean or try others.
- You mentioned the 'book ran fine with 1GB of RAM and running Tiger on a 6GB HD, but probably the 1GB was installed after Tiger was on the HD. There is the remote possibility that the RAM is problematic when running the installers. A Wallstreet, for example, often has problems installing with 512MB, but if one 256MB module is removed, the install goes fine, then the RAM is reinstalled.
If this were my 'book, I would try this:
1. Disconnect all peripherals and reset the PRAM.
2. Boot to the 9.x CD > use Drive Setup to repartition the HD (if you wish) > install 9.x to make sure the HD, RAM, etc, are good-to-go.
3. Boot to your OSX CD and see how the install proceeds. If it fails, it may be a problem with the optical drive and/or CDs. Try the options I mentioned earlier.
4. If you wish, remove the top memory module and try the install again. If successful, reinstall the module.
5. If there is no workaround for the optical drive, you might try installing via FireWire Target Disk Mode. The 'target' will be the Pismo's HD on the desktop of the 'host' computer and you will boot the host computer to the OSX CD and select the Pismo's HD as the destination.
http://docs.info.apple.com/article.html?artnum=58583 -
Why am I having problems attaching files to my email using Firefox 13.0.1.?
I am using a MAC, OS 10.6.8, and have Comcast as my internet provider. I noticed after I upgraded to Firefox 13.0.1 that I am having problems attaching files to my email. I do not experience the same problem with Safari, but I prefer to use Firefox, as all of my bookmarks and passwords are saved there. I just like the way Firefox works better than Safari.
I am a free-lance graphic designer and rely on my internet connection to my customers. I need this resolved ASAP!Could you start by resetting the zoom level on the page? To do that, you can either:
* Press Ctrl+0 (that's a zero) on the keyboard
* View menu > Zoom > Reset
You also can use zoom to increase/decrease the size from there. This article describes the various mouse, keyboard, and menu methods: [[Font size and zoom - increase the size of web pages]].
Any luck? -
Is there a problem with ServletContext.getRealPath() in WebLogic? Seems it
always returns a path prefixed with \applications\DefaultWebApp_myserver,
regardless of the application where the jsp/servlet resides. And that's
only if you use a context based on the jsp/servlet. If you use
getServletConfig().getServletContext().getRealPath("/"), you get null.
Any thoughts?
Never mind; I found the answer in a posting to the
weblogic.developer.interest.servlet newsgroup from July.
"Lance Harris" <[email protected]> wrote in message
news:[email protected]..
> BTW: I'm running WebLogic 6.0sp2. getRealPath() works fine under 5.1
>
> "Lance Harris" <[email protected]> wrote in message
> news:3b9936a0$[email protected]..
> > Is there a problem with ServletContext.getRealPath() in WebLogic? Seems
it
> > always returns a path prefixed with
\applications\DefaultWebApp_myserver,
> > regardless of the application where the jsp/servlet resides. And that's
> > only if you use a context based on the jsp/servlet. If you use
> > getServletConfig().getServletContext().getRealPath("/"), you get null.
> >
> > Any thoughts?
> >
> >
> >
> >
> >
>
>
-
There is a Weard Problem with MY VGA CARD
I got Geforce 4 TI 4600 , before Week I installed a New RAM 512 when am home with my PC i Tryed a game To play (for example. Vice City) when the game started The Screen Was Shuting off, On ,off & My display flickers And fade into Black Screen ! I Tryed many thing like (Uninstall the New RAM and Play with the old one , Format My PC & Reinstall WINDOWS , Update the display Drivers , Check that All The Refresh rates are good , I checked the DirectX Test it was all (*No Problem) with Succesful Tests , My only Idea was to go for Any Service shop ... Iv gone for Two Shops they Couldnt Help me i dont know what to do am so sad for it ANY one Can Help me Or Suggest me any Idea ! please Am Using my Spare GeForce 2 GTS for Now ,(that Problem was like an Human Virus it was only when i start a game , but now Even if i started Windows with It )
thats My e-mail ([email protected]) u can add me for msn Messenger
Thank you all , figoTheres not much to go on, such as your computer, hardware, monitor etc.. I will ask several questions that may give you a hint... What is your video resolution and color depth and refresh rate..Is it beyond you monitor specs?What video drivers are you using? Look in the device manager to see if there are any conflicts, if so that may give a hint..Make sure you BIOS is set for your video card such as the correct AGP settings..Will your MoBo accept your AGP for the video card?My guess it's in the video area and not your system memory..
Thats all I can think of now..Goodluck,
jolphil -
Problems with installing the X-Fi Xtreme Gamer Soundc
Hello,?I've a new X-Fi Xtreme Gamer Soundcard, but I'm not able to install it. I tried the CD, the driver on the page and the ISO somewhere in the forum. I get everywhere the same errormessage:?"No audio device that is compatible with this application can be found" I have deinstalled and deactivated the onboard sound in the bios. I have no idea what I can do to solve the problem. greetzM. Schwander?My system:- XP Prof- CPU: Intel Core Duo 2.66- Mainboard: asus p5b-e- graphic card: Nvidia GeForce 8800 GTS??
the soundcard is correctly in the slot ... (got the some problems with another slot)
now my device is found and i can start the installation, but after a several time, there's a bluescreen with something about "h20x2k.sys" written.Message Edited by wuff on 2-04-20070:22 AM -
MSI FX5600XT problems with agp 4x and other stuff
Well
I just bought myself a MSI FX5600XT-TD128
I had a Hercules (guillemot) GEFORCE2 PRO (clock higher than GTS and slower than Ultra).
I'm not sure if my previous videocard (the gf2pro) would run stable @ 4x or run @ 4x at all.. I know my motherboard is capable of agp 4x, the old videocard I am not sure it was..
WEll, I bought the msi, plugged in and no post.
so I take the card out, put it back in, posted... 5mins later, crash..
No post..
So I put the old videocard in (gf2pro) and disable agp4x in the bios, plug the msi back in and running so far stable...
My motherboard is an IWILL KK266 (via kt133a).. very nice motherboard running on a not-so-compatible-with-it athlon xp 1600+ (1.4ghz)
The mobo problems with the cpu (processor) are limited to having to press 'reset' switch to boot (or else pc will power up but no boot).
Well my question is, is the agp 4x problem related to this msi video card in general, or to a faulty video card I *might* have (so I can exchange this one) or is it related to the motherboard???
Also, can someone explain to me the diferences between FX5600, FX5600XT AND FX5600 ULTRA?
Also, explain to me please the 'V,T,D,R' models differences too?
And Last but not least, what is the best driver for the fx5600xt and winxp??
I'm running msi latest (53.03, I installed it just to test em), I had nvidia's 52.16 prior to that.
Thanks for all ur helpQuote
The mobo problems with the cpu (processor) are limited to having to press 'reset' switch to boot (or else pc will power up but no boot).
This can also be from a weak PSU, which would be even further taxed by adding the power hungry FX card.
Might need a stronger PSU. -
Hi there,
I am new to MSI forum, and have some questions.
I have MSI K9NU Neo-V mainboard and have problem with USB speed . I have all the latest drivers installed and the latest BIOS for my mainboard but still have the problem that mainboard detects all USB devices like USB 1.1
MB MSI MS-7270 ver. 1 (K9NU Neo-V)
CPU AMD Athlon 4200+
VGA MSI 8600 GTS
Memory 2 x 512 MB DDR2 667 Corsair XMS matched Pair
PSU Gigabyte GE-R 460 V1
DVD-RW Pioneer DVR 112D
HDD Western Digital WD2500JS
OS Windows XP SP3 x86
Any idea about this?!
Thanks,
AlekQuote from: Bas on 20-November-09, 21:57:20
Did you install all the drivers listed here?
http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=261
I also move this topic to the right area.
Yes, everything is installed and updated with latest drivers even from nVidia WEB for ULi chipset. the devices that we are talking about are USB removable storage like 8GB USB Flash Drive from Kingmax, 2GB Flash Drive from Xerox, 1 GB USB Flash drive from Kingston, USB case for 2,5" HDD from Spire ... I can count till tomorrow -
Problems with Z68a-gd55 g3 and msi 660 gtx oc ed.
Bought the 660gtx card last week and have been pulling my hair since.. been getting the no post problem with the new card as some other ppl here I see.
from what I gather it's a bios update which is making the combo of these cards to work properly the msi liveupdate took me up to n.70 and that didn't help after reading a couple of posts here i found out about the beta updates for my bios.
Beeing a bit new when it comes to flashing I thought I'd make myself sure at what update to use.
In another post the tip was using .n88 is it still the best to use?yes it's sandy bridge however I seem to do something wrong with the bios update. using the MSI Forum HQ USB Flashing Tool and ran it got the .n88 on there set the bios to boot from it, got a press any key to boot from usb key then it shoot directly to win logo and starts windows.
Running the usb flashing tool program again and it says I got the BIOS Version: VN.8B8 (aka Version: V23.8B8) and a restart later it reverts back to BIOS Version: VN.7 (aka Version: V23.7)
First time I shut down windows after it started and did a clearcmos.
I'm guessing I'm doing something wrong.
Might as well post my system while I'm at it.
System is:
MSI Z68A-GD55 G3
Intel core I5 1155
2x4gb Corsair DDR3 1600
MSI Geforce 660GTX 2GB Twin frozr
320GB WD Caviar
Fractal design Newton R2 650W Modular
almost forgot second time I tried I updates as before and didn't do a clearcmos just turned off the computer plugged the 660 gtx in and started this time I got 2 beeps from mainboard then nothing. then silence for a while then two beeps again until I turned off the computer put my old 250 gts back in and the bois had reverted back to VN.7 again.
without the update and the 660 gtx the update fans running hd runs a bit then nothing btw.
Maybe you are looking for
-
Account in 2 different countries - How do i get all my music in ONE device?
I lived in Portugal and started my first Itunes account there with a portuguese credit card. purchased music etc.. Then moved to the US and changed my credit card and billing address and started purchasing stuff on the American stroe. i was able to h
-
Ever since last sunday, whenever I try to purchase an app from itunes, I always get this error explaining that I cannot establish a secure connection. I made sure TLS 1.0 and SSL 3.0 were enabled in options and I made sure the firewall was notblockin
-
Print all filters defined in a report
I would like to print all filters that are defined in a report using DeskI or WebI (both version XI R2 and 3.1)... In DeskI there are 2 functions in the "Insert" > "Special Field" menu: "Global Filters" and "Query Prompt"; however, I also want to lis
-
How to enable Virtualization ( AMD-V ) on G40-45 ?
hey, I am a new user lenovo laptop , and I was confused when there is a software asks me to activate hadrware virtualization , I have searched for information on the internet , and there is said must pass the BIOS but when I open the BIOS did nothing
-
Officejet 4630 wireless , we do not have a wireless router for our internet
WE purchaed an officejet 4630 for our new dell inspiron 660. We told the employee at the store we did not have wi fi. he said we could still hook up to our computer. How do I do it???