Problem with mobileconfig updates
Hi,
When creating a mobileconfig file with VPN, Wifi and Email (Exchange) settings, the profile deploys just fine over the web (use goes to website). It promts for password for both Exchange and VPN when installing.
After the installation is done, I try adding a web clip in the .mobileconfig file, and upload it to the webserver. Now, when I go to the file with the iPhone I get the error message: "Can't install Profile. Only one Exchange account can be set up at the same time."
I did not change any of the Exchange settings, and I made sure I did NOT change the "Identifier" of the profile. The identifier is "egl.fka.profile".
In the manual it states that if the identifier is the same, the iPhone should update (refresh?) the profile. However, I have to remove the current profile from the iPhone, and then re-add it.
I have also tried the following: Install new profile. Verify everything is working. Then go to the profile address again (without actually changing the profile), and it still pops up with the same error message. This has happened to two iPhones.
Am I doing something wrong?
Kind regards,
Even Glemmestad
Felleskjopet Agri BA
I've run into similar issues. Although a profile is "supposed" to update, it doesn't. I find that it either uninstalls the previous configuration profile to install a new one, or it gives an error.
I guess the problem is that you're trying to over-write an existing configuration profile. Hence, the message stating you're installing multiple exchange settings. Configuration profiles are unique depending on the identifier name.
If it was me, I would change the name of the identifier in the iPhone Configuration Utility.
For example:
egl.fka.profile.exchange (this should ONLY contain the exchange settings)
egl.fka.profile.webclip (this should ONLY contain the webclip)
I find it's best to have 1 function per .mobileconfig file to keep things organized and flexible. Therefore, you only need to deploy the necessary config profile instead of having to constantly edit a configuration profile with multiple settings.
Message was edited by: Ziyun
Similar Messages
-
Problem with an update page.
I have a problem with an update page on my website
Here's how it work
values are defualted in from the advert table - this works fine
I should then be able to change the fields and click on the update button
This works fine but ONLY when the O_year field is populated.
There doesn't seem to be anything special about the O_year field
I thought spry text validation would of been causing the issues, but I removed them and have the same problem.
For some reason the POST_MMupdate value is not being set to 'form4', which it is doing if O_year is set.
Please can someone have a look at this, code,
Also, is there a way of 'stepping through' dreamweaver code to debug it?
Thanks
Adam
$colname_Advert = "-1";
if (isset($_GET['advert_id'])) {
$colname_Advert = $_GET['advert_id'];
mysql_select_db($database_guitarswap_db, $guitarswap_db);
$query_Advert = sprintf("SELECT * FROM advert WHERE advert_id = %s", GetSQLValueString($colname_Advert, "int"));
$Advert = mysql_query($query_Advert, $guitarswap_db) or die(mysql_error());
$row_Advert = mysql_fetch_assoc($Advert);
$totalRows_Advert = mysql_num_rows($Advert);
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form4"))
//Сheck that we have a file
if((!empty($_FILES["PictureLocation"])) && ($_FILES['PictureLocation']['error'] == 0))
//Check if the file is JPEG image and it's size is less than 350Kb
$filename = basename($_FILES["PictureLocation"]["name"]);
$ext = substr($filename, strrpos($filename, '.') + 1);
if (($ext == "jpg") && ($_FILES["PictureLocation"]["type"] == "image/jpeg") &&
($_FILES["PictureLocation"]["size"] < 350000))
//Determine the path to which we want to save this file
$newname = dirname(__FILE__).'/upload/'.$filename;
//Check if the file with the same name is already exists on the server
if (!file_exists($newname))
//Attempt to move the uploaded file to it's new place
if ((move_uploaded_file($_FILES['PictureLocation']['tmp_name'],$newname)))
// echo "It's done! The file has been saved as: ".$newname;
else
// echo "Error: A problem occurred during file upload!";
else
// echo "Error: File ".$_FILES["PictureLocation"]["name"]." already exists";
else
// echo "Error: Only .jpg images under 350Kb are accepted for upload";
else
// echo "Error: No file uploaded";
$filename=$row_Advert['PictureLocation'];
// set default opentoalloffers
if (!isset($_POST['checkopentoalloffers']))
$_POST['checkopentoalloffers'] = 'n';
$updateSQL = sprintf("UPDATE advert SET PictureLocation=%s, O_Make=%s, O_Model=%s, O_Country=%s, O_Year=%s, O_Colour=%s, O_Body=%s, O_Neck=%s, O_Fingerboard=%s, O_Pickups=%s, `value`=%s, `condition`=%s, W_Make=%s, W_Model=%s, W_Country=%s, W_Year=%s, W_Colour=%s, W_Body=%s, W_Neck=%s, W_Fingerboard=%s, W_Pickups=%s, Comments=%s, opentoalloffers=%s, ChangeFlg = %s WHERE advert_id=%s",
GetSQLValueString($filename, "text"),
GetSQLValueString($_POST['O_Make'], "text"),
GetSQLValueString($_POST['O_Model'], "text"),
GetSQLValueString($_POST['O_Country'], "text"),
GetSQLValueString($_POST['O_Year'], "date"),
GetSQLValueString($_POST['O_Colour'], "text"),
GetSQLValueString($_POST['O_Body'], "text"),
GetSQLValueString($_POST['O_Neck'], "text"),
GetSQLValueString($_POST['O_Fingerboard'], "text"),
GetSQLValueString($_POST['O_Pickups'], "text"),
GetSQLValueString($_POST['value'], "int"),
GetSQLValueString($_POST['condition'], "text"),
GetSQLValueString($_POST['W_Make'], "text"),
GetSQLValueString($_POST['W_Model'], "text"),
GetSQLValueString($_POST['W_Country'], "text"),
GetSQLValueString($_POST['W_Year'], "date"),
GetSQLValueString($_POST['W_Colour'], "text"),
GetSQLValueString($_POST['W_Body'], "text"),
GetSQLValueString($_POST['W_Neck'], "text"),
GetSQLValueString($_POST['W_Fingerboard'], "text"),
GetSQLValueString($_POST['W_Pickups'], "text"),
GetSQLValueString($_POST['Comments'], "text"),
GetSQLValueString($_POST['checkopentoalloffers'], "text"),
GetSQLValueString('y', "text"),
GetSQLValueString($_POST['advert_id'], "int"));
mysql_select_db($database_guitarswap_db, $guitarswap_db);
$Result1 = mysql_query($updateSQL, $guitarswap_db) or die(mysql_error());
$updateGoTo = "Member2.php";
if (isset($_SERVER['QUERY_STRING'])) {
$updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
$updateGoTo .= $_SERVER['QUERY_STRING'];
header(sprintf("Location: %s", $updateGoTo));
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<link href="Layout3.css" rel="stylesheet" type="text/css" /><!--[if IE 5]>
<style type="text/css">
/* place css box model fixes for IE 5* in this conditional comment */
.twoColFixLtHdr #sidebar1 { width: 230px; }
</style>
<![endif]--><!--[if IE]>
<style type="text/css">
/* place css fixes for all versions of IE in this conditional comment */
.twoColFixLtHdr #sidebar1 { padding-top: 30px; }
.twoColFixLtHdr #mainContent { zoom: 1; }
/* the above proprietary zoom property gives IE the hasLayout it needs to avoid several bugs */
</style>
<![endif]-->
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
<style type="text/css">
<!--
body {
background-color: #FFF;
margin-left: 20px;
.twoColFixLtHdr #container #main3 #form1 div fieldset {
border: thin ridge #CCC;
-->
</style>
<script type="text/javascript">
<!--
function MM_goToURL() { //v3.0
var i, args=MM_goToURL.arguments; document.MM_returnValue = false;
for (i=0; i<(args.length-1); i+=2) eval(args[i]+".location='"+args[i+1]+"'");
//-->
</script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
</head>
<body class="twoColFixLtHdr">
<div id="container">
<div id="header">
<div id="Righty">
<ul id="MenuBar2" class="MenuBarHorizontal">
<li><a href="index.php">Search</a> </li>
<li><a href="Member2.php">Members</a></li>
</ul>
<p> </p>
</div>
<span id="LoginDiv">
<?php
if (isset($_SESSION['MM_Username']))
echo "hello ". $_SESSION['MM_Username']. "";
echo " <a href='Logout.php'>Log out</a> ";
else
echo "
<a href='Login.php'>Login</a> / <a href='Register.php'>Register</a>
?>
</a></span>
<div id="Middle">
<h1 align="center">GuitarSwap</h1>
</div>
</div>
<div id="sidebar1">
<h4>Members Area</h4>
<ul id="MenuBar1" class="MenuBarVertical">
<li><a href="Member2.php">My Adverts</a></li>
<li><a href="NewAdvert.php">Create new Advert</a></li>
<li><a href="UpdateUserDets.php">My Account</a></li>
</ul>
<h3> </h3>
</div>
<div id="mainContent">
<h4>Update Advert</h4>
<!-- end #mainContent -->
</div>
<!-- This clearing element should immediately follow the #mainContent div in order to force the #container div to contain all child floats -->
<div id="main3">
<div id="main">
<fieldset>
<legend>Please update advert details and confirm</legend>
<form action="<?php echo $editFormAction; ?>" enctype="multipart/form-data" method="post" name="form4" id="form4">
<input type="hidden" name="advert_id" value="<?php echo $row_Advert['advert_id']; ?>" />
<p></p>
<table width="650" align="center">
<tr valign="baseline">
<td width="17" rowspan="15" valign="middle" nowrap="nowrap"><?php echo "<img src='upload/" .$row_Advert['PictureLocation']."' width='64' height='180'/>" ?></td>
<td width="133" align="right" nowrap="nowrap"> </td>
<td width="240" align="center" bgcolor="#CCCCCC"><strong>Offered</strong></td>
<td width="240" align="center" bgcolor="#CCCCCC"><strong>Wanted</strong></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Make:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Make" type="text" value="<?php echo $row_Advert['O_Make']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Make" type="text" value="<?php echo $row_Advert['W_Make']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Model:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Model" type="text" value="<?php echo $row_Advert['O_Model']; ?>" size="30" maxlength="30" /></td>
<td bgcolor="#CCFFFF"><input name="W_Model" type="text" value="<?php echo $row_Advert['W_Model']; ?>" size="30" maxlength="30" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Country:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Country" type="text" value="<?php echo $row_Advert['O_Country']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Country" type="text" value="<?php echo $row_Advert['W_Country']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Year:</strong></td>
<td bgcolor="#CCFFCC"><span id="sprytextfield1">
<input name="O_Year" type="text" value="<?php echo $row_Advert['O_Year']; ?>" size="4" maxlength="4" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span><span class="textfieldMinValueMsg">The entered value is less than the minimum required.</span><span class="textfieldMaxValueMsg">The entered value is greater than the maximum allowed.</span></span></td>
<td bgcolor="#CCFFFF"><span id="sprytextfield2">
<input name="W_Year" type="text" value="<?php echo $row_Advert['W_Year']; ?>" size="4" maxlength="4" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span><span class="textfieldMinValueMsg">The entered value is less than the minimum required.</span><span class="textfieldMaxValueMsg">The entered value is greater than the maximum allowed.</span></span></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Colour:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Colour" type="text" value="<?php echo $row_Advert['O_Colour']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Colour" type="text" value="<?php echo $row_Advert['W_Colour']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Body:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Body" type="text" value="<?php echo $row_Advert['O_Body']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Body" type="text" value="<?php echo $row_Advert['W_Body']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Neck:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Neck" type="text" value="<?php echo $row_Advert['O_Neck']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Neck" type="text" value="<?php echo $row_Advert['W_Neck']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Fingerboard:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Fingerboard" type="text" value="<?php echo $row_Advert['O_Fingerboard']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Fingerboard" type="text" value="<?php echo $row_Advert['W_Fingerboard']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Pickups:</strong></td>
<td bgcolor="#CCFFCC"><input name="O_Pickups" type="text" value="<?php echo $row_Advert['O_Pickups']; ?>" size="30" maxlength="15" /></td>
<td bgcolor="#CCFFFF"><input name="W_Pickups" type="text" value="<?php echo $row_Advert['W_Pickups']; ?>" size="30" maxlength="15" /></td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Condition:</strong></td>
<td bgcolor="#CCFFCC"><label for="condition">
<select name="condition" size="1" id="condition">
<option selected="selected" value="" <?php if (!(strcmp("", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>---select---</option>
<option value="immaculate" <?php if (!(strcmp("immaculate", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>immaculate</option>
<option value="excellent" <?php if (!(strcmp("excellent", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>excellent</option>
<option value="good" <?php if (!(strcmp("good", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>good</option>
<option value="well used" <?php if (!(strcmp("well used", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>well used</option>
<option value="poor" <?php if (!(strcmp("poor", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>poor</option>
</select>
</label></td>
<td bgcolor="#FFFFFF"> </td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Value:</strong></td>
<td bgcolor="#CCFFCC"><span id="sprytextfield3">
<input name="value" type="text" value="<?php echo $row_Advert['value']; ?>" size="11" maxlength="11" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span></span></td>
<td bgcolor="#FFFFFF"> </td>
</tr>
<tr valign="baseline">
<td align="right" valign="top" nowrap="nowrap"><strong>Comments:</strong></td>
<td bgcolor="#CCFFCC"><textarea name="Comments" cols="25" rows="3"><?php echo $row_Advert['Comments']; ?></textarea></td>
<td bgcolor="#FFFFFF"> </td>
</tr>
<tr valign="baseline">
<td nowrap="nowrap" align="right"><strong>Picture location</strong></td>
<td bgcolor="#CCFFCC"><label for="checkopentoalloffers"></label> <input type="file" name="PictureLocation" value="<?php echo $row_Advert['PictureLocation']; ?>" size="20" /></td>
<td bgcolor="#FFFFFF"> </td>
</tr>
<tr valign="baseline">
<td height="26" align="right" nowrap="nowrap"><strong>Open to all offers:</strong></td>
<td bgcolor="#CCFFCC"><input name="checkopentoalloffers" type="checkbox" id="checkopentoalloffers" value="y" <?php if (!(strcmp($row_Advert['opentoalloffers'],"y"))) {echo "checked=\"checked\"";} ?> /></td>
<td bgcolor="#FFFFFF"> </td>
</tr>
</table>
<p> </p>
<div id="submitdiv">
<input type="hidden" name="MM_update" value="form4" />
<input name="submit button" type="submit" id="submit button" value="Update Advert" />
</div>
<div id="exitdiv">
<label for="button15"></label>
<input name="button" type="button" id="button15" onclick="MM_goToURL('parent','Member2.php');return document.MM_returnValue" value="Exit" />
<label for="button16"></label>
</div>
<p> </p>
</form>
</fieldset>
<script type="text/javascript">
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "integer", {validateOn:["blur"], minValue:1900, maxValue:2010, isRequired:false});
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "integer", {validateOn:["blur"], minValue:1900, maxValue:2010});
var sprytextfield2 = new Spry.Widget.ValidationTextField("sprytextfield2", "integer", {minValue:1900, maxValue:2010, validateOn:["blur"], isRequired:false});
var sprytextfield3 = new Spry.Widget.ValidationTextField("sprytextfield3", "currency", {validateOn:["blur"], isRequired:false});
</script>
<br class="clearfloat" />
<!-- end #container -->
</div></div></div>
<script type="text/javascript">
<!--
var = new Spry.Widget.MenuBar("", {imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", {imgDown:"../SpryAssets/SpryMenuBarDownHover.gif", imgRight:"../SpryAssets/SpryMenuBarRightHover.gif"});
var MenuBar1 = new Spry.Widget.MenuBar("MenuBar1", {imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
//-->
</script>
</body>
</html>
<?php
mysql_free_result($Advert);
if (is_resource($Result1)) mysql_free_result($Result1);
?>Please note,
Removing I investigated spry a little more, in the end I settled for removing spry altogether,
Maybe it was because the text field in a $GET (for the default) AND a $PUT (for the update) -
Problems with System Update 3.14.0019 after installation SP2
Have you encountered problems with System Update 3.14.0019 after installation SP2 for Windows Vista?
After this upgrade I view this error: "An error occurred while gathering user information."
Thanks for the helpA known issue. It wasn't supposed to be supported until SP2 is RTM. However, look at the stickied post in the forum for some bad news about SU.
x61s -
Problems with FlashPlayer Update.
Problems with FlashPlayer Update.
after download, install begins, but when the progress bar ends a typical Windows error message displays showing :
(literal translate from spanish):
" is not found the enter point of procedure SetDIIDirectoryW into the dinamic Links Library KERNELL32.dll "
ihave: windows32, XP + FlashPlayer Ver: 11.1.102.55 + MozilaFirefox10.0
flash works ok, but i can't complete a new update since Version: 11.1.102.55
please help me, ThanksMicrosoft Windows XP Professional Version 5.1.2600 Compilacion 2600
(looks like old windows98 / 2000 style but it's XP (i choose the old look in display preferences)
i think it's Service Pack 1 beacause there were problems with SP2 updates with some programs, so this version works Ok with all my software... until now. i Know there's a SP3 and it is an obsolate OS but i like it and works well in this PC.
Do you think that it's the problem? i must install SP3? -
"Waiting for ICloud" after my Gunnerz update. Any solutions from anyone. Supposedly there's an update coming but I won't hold my breath?
Microsoft Windows XP Professional Version 5.1.2600 Compilacion 2600
(looks like old windows98 / 2000 style but it's XP (i choose the old look in display preferences)
i think it's Service Pack 1 beacause there were problems with SP2 updates with some programs, so this version works Ok with all my software... until now. i Know there's a SP3 and it is an obsolate OS but i like it and works well in this PC.
Do you think that it's the problem? i must install SP3? -
Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.
how can i find out what the fix is that works..please
-
CS4 Problem with Template Updates
There's another thread on this subject, but I couldn't see any final resolution.
I'm having a problem with Template Update.
I have all pages in site linked to a single template. I built the template 1st and then created each page from the template using normal method.
When I now make a change to the template, I save the template and it automatically saves and opens a box to select pages to update. I do NOT have to use the Updates feature on the top menus, but I have done that too just to try different things. When I select all the files, it updates them all, most of them correctly. BUT, one or several of them will have a NEW Main Content (and sometimes header) superimposed on top of the existing Main Content (or header). It shifts the page downward and to the right. By the way, down below the screwed section, the content is all still there and the original template is still intact under the screwed up area.
To fix it, I create a new page from the template and start over inserting the Main Content, which is nothing special, just formatted text. Next time I update, that same page will always get screwed up again, but sometimes 1 or more different pages will also get screwed up in the same way, always with a new nested Main Content area (on top of the original or sometimes pushed down half a page).
I thought it might be because of a nested Main Content in that section of the template, but I see none, or any other abnormal html. It does not do this to all 20-30 pages, just one every time and one or more random ones. I see nothing in html different from one page to the next.
Don't know how to attach documents to this, but I have the template and two of the screwed up pages to send.
Charlie
[email protected]The site is http://www.michaelchekhov.net
Public directory is /public_html, but that's the root, so the links below should work.
These pages are out of their normal directory, so the supporting links won't work, but you can see the code. Look at the home page and you can see what all the pages are supposed to look like.
The template which created the problem with the pages below is at /support/TEMPLATE index.dwt
The page that consistently fails is called poatool.html - the bad one is at /support/BAD poatool.html
A 2nd page that failed on that UPDATE is there also - /support/BAD bibliography.html
The currently working copy of the page that fails everytime is /articles/poatool.html.
Thanks.
Charlie -
Hi,
I have some problem with SPAM update.
my SPAM version is 620/patch level is 23 on kernal 620.
I was upgraded my kernal from 620 to 640.
after that i downloaded the SPAM (SAPKD64023) from marketplace, and uncar that patch by using sapcar xvf. After that I went to transaction SPAM and selected option spam/saint update, then I am getting error called
*spam/asint update SAPKD62023 has already been imported successfully
*so please tell me how to update SPAM version from 620/23 to 640Hi
I got your question to some level & from 4.7 onwards Basis Abap & Spam/Saint are segregated to one release.
so for ex- sapkb620**
sapka620**
sapkd620** & when it comes application
sapkh470**
sapke470**
from the above examples 620 indicates version release of Basis Abap & Spam/Saint
& 470 indicates Aplications & HR release
where as you can notice in 4.6b every thing is in on platform
sapkb460**
sapka460**
sapkh460**
sapka460**
Thanx & regards,
Rahul -
I would like to know is there anybody in the community that is not have a problem with the updates.
That is incorrect. Either you misread or the newspaper you read was wrong. iOS 6.1.2 fixes a bug that caused excessive activity and log entries with Exchange servers.
http://support.apple.com/kb/DL1639
The security breach was due to Java-based malware:
http://www.ft.com/cms/s/0/1fdebce6-7ac8-11e2-915b-00144feabdc0.html -
HT4993 problem with software update
I need help how to reslove problems with software update on my iphone 4s.
Reset your device and try it again: hold down the home button along with the sleep/wake button until you see the apple, then let go.(No data loss)
Also make sure you have enough free space on the device for the update file - usually requires 2 to 3 times the actual size of the file to be able unpack & install. -
RSAU461, problem with activating update rules for cube 0csrv_c01
Hello,
I have added new fields to data source 0CRM_SRV_PROCESS_H, then changed transfer rules, added characteristics to ODS 0crm_proh, and reactivated update rules 80crm_proh. But now I have problem with second update rules for this cube named 80crm_cnfh. It is not active and all fields in it have red status, error RSAU461, and I cannot activate it.
What I should do? Should I change somehow that second source for data to my cube (change infosource, ods, rule?)
Regards
Radekhi
As said by the Mti u have just changed the info objects in the ods and u need to map them with the specific info objects from the ods.
double click on the Update rules of the cube and go to the characteristic tab there map the newly added info objects with the IO in the ods.
Khaja -
HT4623 Problems with apps updates
Problems with apps updates
OK
Do you have a question?
If so, then explain your issue in much more detail than "Problems with apps updates" and ask it -
HT5815 has anyone experienced problems with this update.
After insaling it I cannot log on to my mac? had to restore to my latest timemachine backup
Quite a few people have problems with every update. Almost always it is tied to third-party software incompatibility.
If you run into a problem like that, boot into Safe Mode. If that succeeds, it is definitely a third-party software issue.
http://support.apple.com/kb/HT1455
Some company's just can't be bothered making their software compatible with each release. -
Recent problems with Windows Update with Thinkpad 8
Since last week I've started having problems with Windows Update on ny Thinkpad 8. It seems to be related with some recent update. At first I received different error codes. As I don't have many programs on my tablet, I refreshed it and set up Windows and Office again. I ran WU, and after the first update (with 100+ updates) WU was working ok. However, after a second set of updates (probably the most recent) I've started receiving error messages again. Most recently I am receiving code 80070002, and the error seems to affect only the installation of Windows Defender definitions through WU -- other WU updates install correctly, and most of the time I can install Windows Defender updates through Windows Defender. I have already tried the Windows Update Diagnostic tool, but the problem persists.
thanks farby
-
Still the same problem with Live update 2
I still have the same problem with Live update 2.
I've downloaded newer Bios update but it's 13 MB... it's obvious that I can not have
in floppy disk and I'm a little bit uncomfortable of updating bios from CD-rom .
But what else can I do, besides updating Bios to get out of this Live update from start-up.
Should I clear CMOS?13mb are you really sure ?
go here instead.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=436&kind=1
the download file is around 300kb.
make sure you get the right file.
you did not specify if you got L or ILRS.
also dont use live update.
get drivers from http://www.nvidia.com instead.
Maybe you are looking for
-
HT1420 how can i get a list or authorised computers
Hi I see i has 5 computers listes as Authorized but only have 3 item Imac, Iphone and Ipad how can i check what the others are?
-
Hey I just want to use my mac but I can´t sign up it because asking me for a PIN LOCK that I don´t have any idea... Case ID: 471327240
-
Connecting to WiFi when out and about
Hello, I have had my iPod touch for about 2 weeks and I really like it. At home, I have absolutely no problems connecting to WiFi and all of the applications function. The problem arises when I am out and about. I live in New York City, so there are
-
Convert live Video from video recording device to a stream
Hello, I want to convert the captured live video from a Windows phone device to a stream so I can Send it over sockets. Any ideas guys? in other words, I want to send live video data over sockets. Thanks in advance.
-
I dont no what i put in itune questions
is this live chat if so thanks goodness i made an iturn account along time ago and i dont rememer putting in questions like what was your first animals name well i put it in and its not right to my account and the nickname de deny dehope hope couldnt